• The Korean Journal of Nuclear Medicine
• /
• v.24 no.2
• /
• pp.274-278
• /
• 1990

Metastases to the liver presents a common clinical problem in the management of patients with cole-rectal cancer, and are responsible for a high degree of morbidity and mortality associated with this malignancy. Unfortunately, attempts at preventing the development of liver metastases in "high risk" patients has so far been unsuccessful. Ongoing studies of adjuvant chemotherapy have not yet illustrated a significant increase in survival in patients receiving such therapy. The purpose of the study is to investigate the value of adjuvant radiotherapy given in the form of colloidal chromic phosphate P-32 suspension administered via portal vein after radical resection of the primary cancer, in preventing the growth of occult metastases in the liver. Twenty one patients (10 patients of treated group with 11 controls) were followed 18 months after operation. There was no significant change in the CBC and liver functions after administration of P-32 labeled colloidal chromic phosphate. The number of patients who showed local metastases at 18 months were 2 in the treated group and 3 in the control group. While liver metastases occurred in one patient at 6 months and in three at 12 months in the control group, there was no development of liver metastases by 12 months in the treated group. At 18 month follow-up CT scan one patient in the treated group showed a single nodule in the liver. In conclusion liver metastasis rate was lower in the patients who received colloidal P-32 chromic phosphate via portal vein after radical resection of the primary cole-rectal cancer.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.125-133
• /
• 2016

In this study, efforts were made to enhance the mechanical properties of the poly(vinyl alcohol) (PVA) fibers of medium molecular weight(number-average degree of polymerization=1735) varying the ratio in $DMSO/H_2O$ mixed solvent and spinning/drawing conditions. The gel fibers prepared from pure DMSO were opaquely frozen in the coagulating bath of $-20^{\circ}C$. However, transparent gel fibers were formed without freezing for the mixture to contain water less than 80wt%. As the amount of water in the mixture increased the residual solvent in the coagulated gel fibers decreased ranging from 85 to 42wt%. The complex viscosity increased with increasing PVA concentration in 80/20 $DMSO/H_2O$ exhibiting remarkable shear thinning at 18wt%. In the Cole-Cole plot, the 18wt% PVA solutions gave a deviated curve from 12 and 15wt% ones. Thus the optimum PVA concentration for the spinning processing of medium MW PVA solutions in 80/20 $DMSO/H_2O$ was determined to 18wt% with rheological concept. Low degree of drawing during hot drawing process in the dry state was available for high bath draft in the coagulation bath. The most improved mechanical properties were observed by applying the highest possible draw ratio attained by reducing bath draft over multi-step drawing process. In the given bath draft, linear relationship was observed between both tensile strength and modulus and draw ratio showing the inflection points at the draw ratio of 19.5 and 18.0 for tensile strength and modulus, respectively.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.269-272
• /
• 2007

In this study, we investigated the effects of electron beam irradiation on the rheological properties of PLA for enhancing processability. The electron beam was irradiated onto the pure PLA, chemically modified PLA by reactive extrusion, and PLA containing functional monomer. The complex viscosity and log G'vs. log G" plot among dynamic rheological properties were chosen for comparison. The complex viscosity of irradiated pure and chemically modified PLA decreased significantly due to de-gradation of PLA molecules with increasing the E-beam dosages. Complex viscosity of irradiated PLA with functional monomer showed maximum value at moderate dosage, while at high dosage the complex viscosity was decreased by a prolonged irradiation.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.124-130
• /
• 2008

In order to fabricate a modified poly (lactic acid) (PLA) for applications requiring high melt strength, a PLA has been irradiated in the presence of functional monomer of glycidyl methacrylate (GMA). Samples were prepared with various contents of GMA and irradiation dosages, and were characterized by observing their thermal and melt viscoelastic properties and gel faction. The complex viscosity and storage modulus of the modified PLA without GMA were lower than those of the original PLA. Those of the modified PLA decreased with increasing dosage. In the case of the modified PLA containing 0.1 phr or 0.3 phr of GMA, their changing tendency with dosage was similar to the irradiated PLA without GMA. However, the 5 kGy irradiated PLA containing 0.5 phr of GMA showed the greatly enhanced complex viscosity and storage modulus, which were about 3 and 10 times higher than those of the original PLA at a frequency of 0.1 rad/s, respectively.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.11C no.3
• /
• pp.70-74
• /
• 2001

Admittance or impedance spectroscopy is one of the powerful tools to study dielectric relaxation and loss processes in organic and inorganic materials. In this study, the frequency dependent properties of an indium tin oxide/tris(8-hydroxyquinoline) aluminum($Alq_3$)/aluminum structure have been studied. The conductance of the $Alq_3$ film increases with the DC applied voltage up to 4V and decreases above 4V in the low frequency region. This indicates that the resistance of the device decreases with the applied bias due to the carrier injection enhancement, thereafter the injected carriers form the space charge and the additional injection of carriers is prevented. The Cole-Cole plot of the admittance takes a one-semicircle shape, which means that the device can be modeled as a parallel resistor-capacitor network. The resistance and capacitance were estimated as 8.62k${\Omega}$ and 2.7nF, respectively, at 3V in the low frequency region. The dielectric constant ( ${\epsilon}'$ ) of the $Alq_3$ film is independent of the frequency in the low frequency region below 100kHz, while the frequency dependency was observed at above 100kHz. The dielectric loss factor ( ${\epsilon}"$ ) of the $Alq_3$ film shows the dielectric dispersion below 100kHz and dielectric absorption in higher frequency domain. The dispersion is thought to be related to the hopping process of the carriers. The ${\epsilon}"$ is proportional to the reciprocal of the frequency. The dielectric relaxation time was extracted to about 0.318${\mu}s$ from the dielectric absorption spectrum.

• Journal of Surface Science and Engineering
• /
• v.50 no.5
• /
• pp.405-410
• /
• 2017

In order to study current-voltage-luminance and impedance characteristics according to elapsed time, a blue fluorescent OLED was fabricated. The current density and luminance gradually decreased in accordance with elapsed time and did not emit light after 480 hours, and the threshold voltage increased as time elapsed. The Cole-Cole plot was a semicircular shape of a very large size at 2 V of the applied voltage below the threshold voltage, and the maximum value of the real number impedance did not change greatly from 9314.5 to $9902.2{\Omega}$ as time elapsed. Applied voltages 4, 6, and 8 V above the threshold voltage showed a large change in the real number impedance value at the semicircle end to 9,678.2, 9,826, $9,535.4{\Omega}$ according to the elapsed time from 2,222.5, 183.7, $48.2{\Omega}$ immediately after fabricating the device. By increasing the applied voltage beyond the threshold voltage just after device fabrication, the energy difference between the device and the organic layer was overcome and the current flowed, the maximum value of the real number impedance sharply decreased. As time passed, current did not flow through the element even at high applied voltage due to degradation of the element, and even when the applied voltage was higher than the threshold voltage, it showed an impedance value such as applied voltage equal to or less than the threshold voltage. As a result, it can be learned that the change in the impedance with elapsed time reflects the characteristics due to the degradation of the OLED and can predict the characteristics and lifetime of the OLED.

• Journal of Korea Multimedia Society
• /
• v.14 no.5
• /
• pp.691-702
• /
• 2011

Recently, several researchers have attempted to combine human visual perception and computer graphics. Cole et. al. suggest the study results in which line drawing algorithm in computer graphics characterize the properties of line drawing made by artists. The paper also evaluates CG line drawing algorithms depending on whether people recognize effectively specific 3D shape from the image made by those CG line drawing algorithms. However, human recognizes the shape of objects more effectively in image made by BRDF shading model than line drawing algorithm. It means that the shading factor is important to recognize shape with human perception. In this paper, we analyze the correlation between shading made by human artists and that made by CG shading algorithms. The study is to characterize the mathematical properties of artists' shading and CG shading. This type of analysis can guide the future development of new CG shading algorithm in computer graphics for the purpose of shape perception.

• The Research Journal of the Costume Culture
• /
• v.8 no.3
• /
• pp.374-386
• /
• 2000

This study investigated the relation between seasonal variation of total clothing weight, room, outdoor temperature and basal metabolic rate in man. The basal metabolic rate and total clothing weight, room temperature was determined seasonal for a period of two years and grouped four seasons. Subjects (adults volunteers) who live in seoul and mokpo were compose 120 subject The results were obtained as follows. Seasonal outdoor temperature was difference of seoul and. mokpo. But room temperature in apartments was a little difference than private house. Total-clothing weight is showed seasonal variations at the seoul, private house than at the mokpo, apartment.. The basal metabolic rate is suggested there in gender difference in the basal metabolic rate (P〈.001). The basal metabolic rate increased gradually with the peak of winter sespectively and deceased again todward summer. The difference of between basal metabolic rate in summer and winter was significant room temperature, of seoul and private house, and light total clothing weight.

• Language and Information
• /
• v.15 no.1
• /
• pp.63-78
• /
• 2011

This study investigates the binding behavior of the Korean anaphor 'caki', which has been regarded thus far as a long-distance anaphor (LDA). Given that even local anaphors can be bound long-distance when they function as exempt anaphors in certain languages (Pollard and Sag 1992; Kim and Yoon 2009a, b), I investigated the binding behavior of LD-bound 'caki', in order to determine whether LD-bound 'caki' differs from LD-bound 'caki-casin' in the same contexts. In the experiment, subjects were required to rate the grammaticality of Korean sentences representing various types of LD binding of 'caki' and to determine whether the sloppy or the strict reading was more prominent in elliptical VPs containing the anaphor. The results are discussed with respect to the typology of LDAs proposed by Cole, Hermon and Huang (2001).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1225-1227
• /
• 2004

The robotic shoe testing system that mechanically simulates human motion was proposed to overcome the problems associated with human subject tests. The objective of this study is to predict new motion trajectory for robot that will produce similar force and moment of particular human motion. In order to solve this problem, it is imperative to understand the dynamics of robot for shoe testing. The methodology using parameter estimation technique was proposed for this problem. Since the dynamics of robot is certainly different from that of human, it is necessary to adapt/modify the robot's trajectory for future analysis, which is currently under investigation.