• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.51-52
• /
• 2011

This study is to propose a curing method for a concrete wall structure under severe cold climate. The curing methods of using heated cable, heated panel and insulated form were applied. Results showed that the concrete cured by the heated cable resulted in the highest temperature history and the highest strength development at 28 days. Further, it is believed that the curing methods of the heated panel and insulated form are also recommendable for the resistance of the early frost damage on the concrete in practice.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.645-650
• /
• 2003

The purpose of this study is to provide the optimum mix design of cold weather concrete to be placed at the foundation structures in substation. The basic performance tests including slump and slump flow, air content, compressive strength and freezing & thawing resistance were conducted for cold weather concrete by varying with W/C ratios such as 40%, 50% and 60% and air contents such as 3%, 4%, 5% and 6%. The effect on durability of concrete corresponding to the increasing amount of air content and W/C ratio was evaluated and the optimum mix design was recommended. From this study, the concrete mix design containing 6% of air content and 45% of W/C ratio is recommended for the foundation concrete of substation.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.841-843
• /
• 2006

In high-performance cold work applications, tool failure depends on the predominating loading conditions. Typical failure mechanisms are a combination of abrasive wear, adhesive wear, plastic deformation, cracking and edge crumbling. In this paper we demonstrate how the microstructure of tool steels can be positively influenced by modifying the alloying system and the production route to meet the demands of the different loading situations which occur during operation. The investigation was focused on ductility, fatigue strength and wear resistance. Theoretical considerations were confirmed by practical tests.

• 대한기계학회논문집B
• /
• 제25권3호
• /
• pp.277-284
• /
• 2001

One of the problems in a refrigerator operation is the frost formation on a cold surface of the evaporator. The frost layer is formed by the sublimation of water vapor when the surface temperature is below the freezing point. This frost layer is usually porous and formed on the cold surface of the evaporator. The frost layer on the surface of a evaporator will make side effect such as thermal resistance. However, these important factors have not been used in determining the defrosting period. Therefore, the proper defrosting operation period based on the new defrosting method is very important, and make a comparison between conventional method like electric defrost and new method in compression work, evaporation pressure, evaporation temperature.

• International Journal of Railway
• /
• 제3권1호
• /
• pp.1-6
• /
• 2010

The steel plate-girder bridges with concrete gravity piers have possibilities of overturning by lateral inertial force which can be reproduced by sudden earthquake attack. This paper explores an overturning mechanism of existing concrete gravity pier onto the sandy soil in the event of lateral push-over load by in-situ experimental observation. The in-situ push-over experiment for pier with earth anchors between spread footing and rock beds exhibits a reasonable enhancement of ductility against overturning. In unanchored system, a flexural crack at cold joint of concrete pier is not developed because of the over-turning of the pier. This leads a global instability (rotation) of pier-footing system with relatively low stresses in pier itself. While a lateral load is persistently increased in anchored system, the successive flexural cracking failure at cold joint is observed even after the local shear failure of soil due to redistribution of stress equilibrium between soil and pier structure as long as a tensile action of anchor cable is active.

• Steel and Composite Structures
• /
• 제30권5호
• /
• pp.457-469
• /
• 2019

Steel pallet racking industry has globally used from the industrial revolution and has deeply evolved from hot-rolled profile into cold-formed profile to raise the optimization in engineering field. Nowadays, some studies regarding cold-formed steel profile have been performed, but fewer studies in terms of cold-formed pallet racking specifically in connection due to the semi-rigid behavior by lug-hooked into the upright have been conducted. The objective of this study is to review the related literature on steel storage racking connection behavior.

• 대한기계학회논문집A
• /
• 제36권4호
• /
• pp.405-412
• /
• 2012

종래 아연의 부식 속도를 줄이는 가장 일반적인 방법은 $Cr^{+6}$를 도포하여 화학적으로 개조하는 것이었다. 그러나 $Cr^{+6}$는 현재 환경 보호법 때문에 사용이 제한되어 있다. 따라서 자자들은 Si를 가지는 유/무기 용액에 대한 아연도금강판의 최적 조건을 연구하였다. 최적 내식성은 $190^{\circ}C$에서 5분간 열처리한 조건으로 나타났다. 본 연구에서는 내식성 평가를 위하여 우레탄 용액(Urethane 20 wt.% ; S-700), Si를 가지는 유/무기 용액(Si polysilicate 10 wt.% + Urethane 10 wt.% LR-0317) 및 Si와 Ti를 가지는 2종류의 유/무기 용액(Si polysilicate 7 wt.% + Urethane 13 wt.% + Ti amorphous 0.5 wt.% ; LR-0727(1), Si polysilicate 7 wt.% + Urethane 7 wt.% + Ti amorphous 0.5 wt.% + epoxy 6wt.% ; LR-0727(2))을 사용하였다. 내식성 평가는 냉간압연 강판을 사용하여 염수분무 시험으로 실시하였다. 7시간의 염수 분무 시험에서 LR-0727(1)과 LR-0727(2) 용액이 냉간 압연 강판에 대하여 우수한 내식성을 나타내었다.

• Journal of Welding and Joining
• /
• 제22권5호
• /
• pp.58-64
• /
• 2004

Although leakage at a low carbon steel pipe made by electrical resistance welding (ERW) was reported due to grooving corrosion, the cause for the corrosion has not yet been cleared. In order to clarify the main cause, failure analysis on the leaked pipe was carried out, followed by metallographic investigation and corrosion test for the various ERW pipe made with different welding heat input. The microstructure, particularly inclusion content, of the weldment is dependant on the welding heat input applied. For an improper low heat input, the amount of inclusion at the weld was high. High inclusion content accelerated grooving corrosion at the weld. It is therefore that welding heat input should be controlled based on the carbon content of the pipe in order to improve the corrosion resistance of the ERW pipe.

• 한국의류학회지
• /
• 제20권4호
• /
• pp.565-572
• /
• 1996

The purpose of this study was to measure partial heat resistance of Hanbok when it worn. Since Hanbok varies from season to season, four different set of Hanboks (R, SN, p and S) were tested. Also Durumagi (D) which is worn over Hanbok (5) to keep warm from winter cold was tested as well. The thermal manikin was used in this experiment. The room temperature, air velocity and the relative humidity was set at $20\pm0.5^{\circ}C$, 0.15 m/sec and $50\pm$5% respectively. The mean skin temperature of the manikin was set at $33\pm0.5^{\circ}C$. The results were as follows: 1. The order from the least total heat resistance to the most was SN, R, p, 5 and D. 2. Upper arms had the highest heat resistance among the 13 parts. The next was abdomen thighs, buttock, legs, forearms and chest, back, and head, the order from the most to the least.

• Corrosion Science and Technology
• /
• 제3권4호
• /
• pp.148-153
• /
• 2004

Magnesium thin flims were prepared on cold-rolled steel substrates by RF magnetron sputtering technique. The influence of argon gas pressure and substrate bias voltage on their crystal orientation and morphology of the coated films were investigated by scanning electron microscopy (SEM) and X-ray diffraction, respectively. And the effect of crystal orientation and morphology of magnesium films on corrosion behaviors was estimated by measuring anodic polarization curves in deaerated 3%NaCl solution. From the experimental results, all the sputtered magnesium films showed obviously good corrosion resistance to compare with 99.99% magnesium target of the sputter-evaporation metal. Finally it was shown that the Corrosion-resistance of magnesium films can be improved greatly by controlling the crystal orientation and morphology with effective use of the plasma sputtering technique.