• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.13-13
• /
• 2022

Recently, stable crop production is threatened by the effects of climate change. In particular, it is difficult to consistently maintain agricultural policies due to large price fluctuations depending on the difference in total domestic rice production from year to year. For stable rice production amid changes in the crop growing environment, development of varieties with improved disease resistance and abiotic stress stability is becoming more important. In here, drought and cold tolerant trait have been studied. First, for the development of drought tolerant varieties, we analyzed which agricultural traits are mainly affected by domestic drought conditions. As a result, it was observed that drought caused by the lack of water during transplanting season inhibits the development of the number of tiller and reduces the yield. 'Samgang' was selected as a useful genetic resource with strong drought tolerant and stable tiller number development even under drought conditions by phenotype screening. Three of drought tolerant QTLs were identified using doubled haploid (DH) population derived from a cross between Nacdong and Samgang, a drought sensitive and a tolerant, respectively. Among these QTLs, when qVDT2 and qVDTl1 were integrated, it was investigated that the tiller number development was relatively stable in the rainfed paddy field conditions. It is known that the high-yielding Tongil-type cultivars are severely affected by cold stress throughout the entire growth stage. In this study, we established conditions that can test the cold tolerance phenotype with alternate temperature to treat low temperatures in indoor growth conditions similar to those in field conditions at seedling stage. Three cold tolerant QTLs were explored using population derived from a cross between Hanareum2 (cold sensitive variety, Tongil-type) and Unkwang (cold tolerant variety, Japonica). Among these QTLs, qSCT12 showed strong cold tolerant phenotype, and when all of three QTLs were integrated, it was investigated that cold tolerant score was relatively similar to its donor parent, Unkwang, in our experimental conditions. We are performing that development of new variety with improved cold tolerant through the introduction of these QTLs.

• 소성∙가공
• /
• 제31권3호
• /
• pp.129-135
• /
• 2022

The purpose of this study was to quantitatively evaluate the influence of hardness of tool materials on wear resistance in the sheet metal forming process. Punches used in the wear test were made of STD-11 and K340 tool material, and the tempering temperature was set to 530℃ and 500℃, respectively, to control the hardness of the tool materials. The punches mimic the shape of stamping tool of automotive body component to reflect its plastic deformation, and are designed to concentrate wear on the curvature region of punches. Progressive die and coil sheet were used to save time, cost, and raw sheet materials. By quantitatively measuring the wear depth of the punches, the wear behavior and mechanism of the punches were investigated, and characteristics of hardness and wear resistance according to tool materials and tempering temperatures were evaluated. Testing results indicate that the punch made of K340 tool steel with higher hardness had better wear resistance than that of STD-11 tool steel, and the hardness and wear resistance of tool steel were significantly impacted by the tempering temperature.

• 한국건축시공학회지
• /
• 제2권2호
• /
• pp.151-156
• /
• 2002

When fresh concrete is exposed to low temperature, the concrete may suffer frost damage due to freezing at early ages and strength development may be delayed. One of the solution methods for resolve these problems is to reduce freezing temperature of concrete by the use of chemical admixture called Accelerators for freezing resistance. In this study, we investigate the effect on strength development of cement mortar using accelerators for freezing resistance with the variance curing condition. As the result of this study, the mortar using accelerators for freezing resistance show that continuously strength development in curing condition of -5$^{\circ}C$. And compressive strength under the variance temperature condition was higher than constant temperature condition in same maturity.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1267-1272
• /
• 2000

When fresh concrete is exposed to low temperature, the concrete may suffer frost damage due to freezing at early ages and strength development may be delayed. These are problems on cold weather concrete. One of the solution methods for resolving these problems has been to reduce the freezing temperature of concrete by the use of chemical admixtures called Accelerators for freezing resistance. Therefore, in this study, we executed freezing temperature of mortar, setting and strength properties with using water reducing accelerator and accelerators for freezing resistance which are producted internationally. As a result of this experiment, the freezing temperature of mortar is lower and the setting property is promoted when the admixing content of accelerators for freezing resistance is increased. Moreover, the compressive strength of mortar used accelerators for freezing resistance represented the result which is similar with result of analysis of compressive strength increase with using logistic curve formula, but in the case of plain and using water reducing accelerator, there is no relation between logistic curve formula, maturity and compressive strength.

• Structural Engineering and Mechanics
• /
• 제53권5호
• /
• pp.867-880
• /
• 2015

Mechanical fastening is still one of the main methods used for joining components. Different techniques have been applied to reduce the effect of stress concentration of notches like fastener holes. In this work we evaluate the feasibility of combining laser shock peening (LSP) and cold expansion to improve fatigue crack initiation and propagation of open hole specimens made of 6061-T6 aluminum alloy. LSP is a new and competitive technique for strengthening metals, and like cold expansion, induces a compressive residual stress field that improves fatigue, wear and corrosion resistance. For LSP treatment, a Q-switched Nd:YAG laser with infrared radiation was used. Residual stress distribution as a function of depth was determined by the contour method. Compact tension specimens with a hole at the notch tip were subjected to LSP process and cold expansion and then tested under cyclic loading with R=0.1 generating fatigue cracks on the hole surface. Fatigue crack initiation and growth is analyzed and associated with the residual stress distribution generated by both treatments. It is observed that both methods are complementary; cold expansion increases fatigue crack initiation life, while LSP reduces fatigue crack growth rate.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2053-2058
• /
• 2008

It was investigated thermal performances on two array types of a serial circulation and a two-way parallel circulation for six water-cooled cold plates covered with non-metallic material (polycarbonate, PC) to reduce weight of the cooling devices for humanoid robot cooling. Six cold plates attached on $10{\times}10\;mm^2$ copper base : $0.5{\times}0.5\;mm^2$ pin-finned surfaces of 1.5 mm high with 0.5 mm array spacing, was mounted on six copper heating blocks with isothermal conditions of $50{\sim}90^{\circ}C$, respectively. In order to compare thermal characteristics according to two circulation types, the surface temperatures of heating blocks and the cooling water temperatures at inlets and outlets of cold plates were measured. From the results, it was found that a two-way parallel circulation was better performance than a serial circulation in terms of total thermal resistance, total heat transfer rate, and surface temperature rises from $1^{st}$ heating block to last one for six multiple cold plates.

• 한국생활과학회지
• /
• 제18권5호
• /
• pp.1087-1092
• /
• 2009

From the environmental adaptation point of view, the clothing habits made by the thermal sensation and clothing weight of elderly women have changed according to the thermal sensation and health condition. The purpose of this study was to obtain the basic data for developing healthy and comfortable clothing for elderly women. Clothing weight, thermal sensation, clothing microclimate, resistance to cold and heat of 198 elderly women in Taejeon were surveyed from October 9, 2007 to October 19, 2007. 1. Clothing weight per body surface area was $830.4g/m^2$ of total clothing weight, $242.8g/m^2$ of underwear clothing weight, $617.3g/m^2$ of outerwear clothing weight, $419.8g/m^2$ of upper clothing weight, and $420.4g/m^2$ of lower clothing weight. 2. More than 90% of the respondents replied that they felt comfortable when the temperature inside the clothing was $33.5^{\circ}C$ and humidity inside the clothing was 30.2%. 3. The elderly women were more sensible to cold than to hot, those who felt cold had a tendency to wear heavier clothing. 4. The appeal rate for physical pain of older and lower income people, especially those with an income under 1,000,000 won, was higher than that of others. On the other hand, the lower the subjective economic level, the younger they were, and the more the monthly average income was, the higher the rate of mental pain. 5. The heavier the total clothing weight was, the higher the appeal rate for general pain.

• Journal of Microbiology and Biotechnology
• /
• 제29권6호
• /
• pp.952-961
• /
• 2019

Chlorella spp. are green algae that are found across wide-ranging habitats from deserts to arctic regions, with various strains having adapted to survive under diverse environmental conditions. In this study, two novel Chlorella strains (ABC-002, ABC-008) were isolated from a freshwater lake in South Korea during the winter season and examined for possible use in the biofuel production process. The comparison of ABC-002 and ABC-008 strains with Chlorella vulgaris UTEX265 under two different temperatures ($10^{\circ}C$, $25^{\circ}C$) revealed their cold-tolerant phenotypes as well as high biomass yields. The maximum quantum yields of UTEX25, ABC-002, and ABC-008 at $10^{\circ}C$ were 0.5594, 0.6747, and 0.7150, respectively, providing evidence of the relatively higher cold-resistance capabilities of these two strains. Furthermore, both the biomass yields and lipid content of the two novel strains were found to be higher than those of UTEX265; the overall lipid productivities of ABC-002 and ABC-008 were 1.7 ~ 2.8 fold and 1.6 ~ 4.2 fold higher compared to that of UTEX265, respectively. Thus, the high biomass and lipid productivity over a wide range of temperatures indicate that C. vulgaris ABC-002 and ABC-008 are promising candidates for applications in biofuel productions via outdoor biomass cultivation.

• 한국토양비료학회지
• /
• 제16권2호
• /
• pp.183-187
• /
• 1983

시비수준(施肥水準)을 달리하여 저온처리를 하였을 때 내냉성(耐冷性)이 다른 수도품종간(水稻品種間) 당양특성(堂養特性)이 어떻게 변화되는지를 알고자 질소(窒素)와 인산(燐酸)의 수준(水準)을 달리하여 재배(栽培) 한30일묘(日苗)를 상온(常溫)(대조구)와 저온(低溫)($15^{\circ}C$ 생육상(生育床))에서 각각(各各) 12일간(日間) 생육(生育)시킨 후 건물중(乾物重)과 식물체중(植物體中) 무기성분(無機成分) 함량(含量)을 조사(調査)한 결과(結果) 다음과 같다. 1. 저온구 수도체는 대조구에 비(比)하여 평균, 건물중(乾物重) 29.4%, 인산(燐酸) 21.3%, 질소(窒素) 15.3%, 가리(加里) 10.1% 규산함량(珪酸含量) 8.70%로 감소(減少)하였다. 2. 대조구에 비(比)하여 저온처리에 의한 인산함량(燐酸含量) 감소율(減少率)은 수도품종(水稻品種)의 내냉성(耐冷性) 강중약(强中弱) 순(順)으로 13.5%, 19.5%, 31.1%이었고 질소(窒素)는 13.5%~16.0%, 가리(加里)는 6.9%~12.9%, 규산함량(珪酸含量)은 5.1%~12.8% 범위(範圍)에서 감소(減少)되었다. 3. 저온처리한 수도체의 인산(燐酸)과 규산함량(珪酸含量)은 내냉성(耐冷性)을 달리하는 품종간(品種間) 차이(差異)를 보이므로써 저온저항성(低溫抵抗性)의 판단(判斷) 지표(指標)로 볼 수 있었다. 4. 질소증시에 따라 저온수도체의 규산함량(珪酸含量)은 약간 증가하고 규산함량(珪酸含量)은 크게 떨어졌으며 인산(燐酸)의 증시로는 질소(窒素) 및 규산함량(珪酸含量)이 다같이 증가되었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권1호
• /
• pp.11-14
• /
• 2018

High Temperature Superconducting (HTS) power cables are capable of transmitting bulk power without any loss compared to conventional copper cables. The major challenge in the design of such HTS cables is the high stresses (electro-thermal/electro-mechanical) developed at high voltages, high currents and cryogenic temperatures. The safe and reliable operation of HTS cables involves lots of instrumentation for monitoring, measurement, control and safe operation. In principle, a four probe method for resistance (RTD PT-100) is used for temperature measurements at various locations of HTS cable. The number of connecting leads required for this is four times that of the number of sensors. The present paper discusses a novel way of connecting 128 RTD sensors with the help of only 14 leads using a cold electronics based multiplexer board. LabVIEW 11.0 software was used for interfacing and displaying the readings of all the sensors on computer screen.