• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1000-1001
• /
• 2006

Two atomized alloy powders were pre-compacted by cold and subsequently hot forged at temperatures ranging from 653K to 845K. The addition of Cu and Mg causes a decrease in the eutectic reaction temperature of Al-10Si-5Fe-1Zr alloy from 841K to 786K and results in a decrease of flow stress at the given forging temperature. TEM observation revealed that in addition to Al-Fe based intermetallics, $Al_2Cu$ and $Al_2CuMg$ intermetallics appeared. The volume fraction of intermetallic dispersoids increased by the addition of Cu and Mg. Compressive strength of the present alloys was closely related to the volume fraction of intermetallic dispersoids.

• Particle and aerosol research
• /
• v.13 no.4
• /
• pp.165-172
• /
• 2017

For precise particle measurements in combustion environments, various dilution sampling methods were compared. Dilution equipments using dilution tunnels and hot/cold dilution with porous tube dilutors were most frequently used so far. The combination of porous tube dilutor and ejector diluter has relatively small footprint, and it results in lower particle losses compared to other methods. To determine the portion of condensable particulate matter, proper temperature control and flow control is required.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.2 s.17
• /
• pp.126-135
• /
• 2004

The KSR-III rocket developed by KARI is the first rocket vehicle which is adopting the liquid propellant rocket engine system in Korea and its flight test was successfully done last year, KSR-III is a sounding rocket class launch vehicle, but there is a sense to accomplish design, manufacture, performance test and finally its flight test by domestic technology. In this paper, the authors are intended to introduce the multi-purpose test facility(PTA-II Test Facility) which is constructed for the variety of tests on KSR-III feeding system(single component tests, verification tests, cold flow tests and combustion tests) and its firing test results.

• Progress in Superconductivity and Cryogenics
• /
• v.13 no.2
• /
• pp.29-32
• /
• 2011

The thermal properties of insulation material are essential to develop a high-temperature superconducting (HTS) power cable to be operated at around liquid nitrogen temperature. Unlike metallic materials, nonmetallic materials have a high thermal resistance; therefore special attention needs to be paid to estimate heat flow correctly. Thus, we have developed a precise instrument for measuring the thermal conductivity of insulating materials over a temperature range from 40 K to near room temperature using a cryocooler. Firstly, the measurement of thermal conductivity for Teflon is carried out for accuracy confirmation. For a supplied heat flux, the temperature difference between warm and cold side is measured in steady state, from which the thermal conductivity of Teflon is calculated and compared with published result of NIST. In addition, the apparent thermal conductivity of Polypropylene laminated paper (PPLP) is presented and its temperature dependency is discussed.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.159-162
• /
• 2003

Cooling with easy, reliable cryocooler is highly desirable for the commercial and military application The pulse tube refrigerator has no moving parts at the cold end, so that the mechanical vibration and magnetic noise can be reduced to the low level with higher relaibility and longer lifetime than the Stilting cryocooler. The inertance tube improve the performance of pulse tube refrigerator by providing optimal phase shift between pressure and amss flow rate, and it is easiest to implement at large cooling capacity and high operating frequency. In this study, the performance of the inertance pulse tube refrigerator was investigated by analysis. The results show the influence of the diameter and length of the inertance tube on the performance of the refrigerator.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.2157-2162
• /
• 2004

As the friction between two mated materials generates electrostatic voltage, vehicles especially in the cold climate has been accumulated an electrostatic voltage by the reason of fuel flow in the fuel line, air flows out side of vehicle, etc. In this study, investigations of electrostatic discharge characteristics has been carried out in the fuel systems of gasoline engines depending on the environment temperature. For the experiment, conventional fuel filters(paint coated steel case) and specially made testing equipment are prepared. The experimental results shows, an accumulation speed of electrostatic voltage depends on the environmental temperature and new methods of testing procedures are required compare to SAE standards.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.4 no.3
• /
• pp.175-182
• /
• 1992

Freezing of the binary solution ($H_2O-NaCl$) saturating a packed bed of spheres is investigated experimentally. The system is cooled through its top surface, and the bottom is maintained at a temperature above the liquidus. Experiments are performed on the hypolutectic side, and the cold wall temperature is lower than the eutectic point. The effects of initial mixture concentration, superheat and glass bead diameter on temperature and concentration distributions are investigated. Supercooling was observed only at early times of the freezing process for experiments with 5% initial salt concentration. Flow visualization experiments and mushy-liquid interface position observations revealed natural convection in the liquid region. Remelting phenomena was not observed at both the solid-mushy and mushy-liquid interfaces.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.11a
• /
• pp.4-4
• /
• 1997

로켓 조종장치는 크게 추력방향 조종(TVC, Thrust Vector Control) 장치, 측면추력조종(Lateral Thrust Control) 장치 그리고 공기역학 조종면으로 분류할 수 있다. 조종장치의 공통된 특징은 모터가 작동하거나 유도탄이 비행할 때만 타의 효과가 발생한다는 점이다. 그러므로 조종장치를 개발하기 위해서는 이상류 초음속 유동이나 삼음속 이상의 자유유동(freestream)을 지상에서 효과적으로 모의할 수 있는 지상 시험장치가 필요하다. 이 시험장치에는 초음속 풍동과 유동 시험장치(cold-flow test stand), 그리고 6분력 트러스트 스텐드가 포함된다. 삼성항공은 우주용 추진기관의 성능을 지상에서 간단한 장치를 구현하여 시험할 수 있는 모의연소 시험장치, 노즐유동에 포함된 고체입자를 직접 수집할 수 있는 고체입자 포집장치 등 각종 시험장치를 제작하였다. 이를 바탕으로 차세대 전술유도탄의 핵심기술가운데 하나인 조종장치와 이를 효과적으로 개발하기 위한 지상 시험장치 확보에 착수하고 있다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.2
• /
• pp.157-166
• /
• 1999

Numerical calculations of turbulent natural convection in an enclosure of the 20 kYA oil-immersed transformer model are presented. The transformer is modelled as two concentric cylinders with different heights and diameters. The thermal boundary layers are well represented in the temperature distributions along the wall of the transformer model. The flow stratification between the hot and cold walls can not be seen in the transformer model. The turbulence eddy viscosity has its maximum at the center of the core and its maximum values at the top of the core are larger than those at the bottom of the core.

• Journal of Embryo Transfer
• /
• v.30 no.1
• /
• pp.1-6
• /
• 2015

The cold shock of spermatozoa is associated with oxidative stress induced by reactive oxygen species. This study was conducted to evaluate the toxicity of natural antioxidant green tea extract (GTE) in lactose-egg yolk (LEY) extender during boar sperm cooling prior to freezing. Spermatozoa were cooled to $5^{\circ}C$ for 3 h in LEY extender containing 0 (control), 1, 10, 100 or 1,000 mg/l of GTE, re-suspended with LEY-glycerol-Equex extender and cooled at $5^{\circ}C$ for 30 min. Sperm progressive motility, viability and phosphatidylserine (PS) translocation were evaluated. PS translocation was assayed by flow cytometry using Annexin V-FITC apoptosis detection kit. The sperm function including progressive motility, viability and PS translocation was not significantly different regardless of GTE concentrations (P>0.05). In conclusion, this study demonstrated non-toxicity of GTE supplement in LEY extender during sperm cooling.