• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권1호
• /
• pp.55-62
• /
• 2015

국내에서는 천연가스 공급국가와 수입국가의 거리, 공급시설 투자, 국가 간 협력 등 여러 가지 제약에 따라 액화천연가스를 수입하고 있다. 수입한 액화천연가스를 수요처로 공급하기 위해 해수를 이용한 기화과정에서 냉열이 낭비되고 있다. 본 연구에서는 이러한 냉열을 효율적으로 활용하는 냉열발전시스템에서 직접팽창과 유기랭킨사이클 방식의 운전성능을 비교 연구하였다. 시뮬레이션은 Aspen HYSYS를 이용하여 수행하였으며, 운전성능 분석은 T-S 선도 및 시스템 성능 해석을 토대로 비교분석하였다. 시뮬레이션 결과로부터 발전시스템의 운전 측면에서는 유기랭킨사이클 방식이 유리한 것을 확인하였다.

• 한국기계가공학회지
• /
• 제17권1호
• /
• pp.153-160
• /
• 2018

A pressure vessel consists of an inner tank and the outer tank; the material of the inner tank is austenite stainless steel, and the outer tank is general carbon steel. As the storage amount increase, the size of the inner tank for LNG also increases, which eventually increases the weight of the LNG storage tank. The Cold Stretch method can transport and store the LNG in a larger amount than the conventional pressure container, and the weight of the pressure vessel can also be reduced at 50 70% due to the reduction of the thickness, which is excellent from an economic and energy consumption perspective. Although the Cold Stretch method has these advantages, the domestic situation has not developed any related legislation. In this study, the actual production of pressure vessels using the Cold Stretch method will be processed and the volume expansion after the Cold Stretch will be checked and compared with the mechanical properties.

• 수산해양교육연구
• /
• 제26권4호
• /
• pp.760-768
• /
• 2014

Yet logistics base in China has a refrigerated storage facilities installed areas, the number of those is very limited and is generally insufficient. According to these especial points, a new construction cold chain logistics network design strategy is required from how to use the existing refrigerated warehouses to new issue. For example, however refrigerated storage facility is supplied, can it satisfy all demand of this area? Then does it have optimized location of this area? If future demand expansion, adding that already other refrigerated storage facilities matter? Or, add another refrigerated facilities, optimum cold chain established a network matter? So on. Above problems can be occurred. In order to solve facing many of these issues of distribution network, northeast area in China has been selected as a subject, and we designed a new cold chain distribution network.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.101-108
• /
• 2011

On cold start operation of an SI engine, a catalyst shows poor performance before it reaches activation temperature. Therefore, fast warmup of the catalyst is very crucial to reduce harmful emissions. In this study, an appropriate control strategy is investigated to increase exhaust gas temperature through changes of spark timing. Combustion stability is also considered at the same time. Exhaust gas temperature and pressure of combustion chamber are measured to investigate the effects of spark timings on cold start and idle performance. Experiments showed that retarded spark timing promotes the combustion at the end of expansion stroke and increases exhaust gas temperature during cold start.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권3호
• /
• pp.30-34
• /
• 2016

An integral crank driven Stirling cryocooler is solidly based on concepts of direct IR detector mounting on the cryocooler's cold finger, and the integral construction of the cryocooler and Dewar envelope. Performance factors of the cryocooler depend on operating conditions of the cryocooler such as a cyclic mean pressure of the working fluid, a rotational speed of driving mechanism, a thermal environment, a targeted operation temperature and etc.. At given charging condition of helium gas, the cyclic mean pressure of helium gas in the cryocooler changes with temperatures of the cold end and the environment. In this study, effects of the cyclic mean pressure of helium gas on performances of the Stirling cryocooler were investigated by numerical analyses using the Sage software. The simulation model takes into account thermodynamic losses due to an inefficiency of regenerator, a pressure drop, a shuttle heat transfer and solid conductions. Simulations are performed for the performance variation according to the cyclic mean pressure induced by the temperature of the cold end and the environment. This paper presents P-V works in the compression and expansion space, cooling capacity, contribution of losses in the expansion space.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.29-37
• /
• 2000

The effect of a ceramic ball inclusion on densification behavior of a metal powder compact was investigated under cold isostatic pressing, pressureless sintering and hot isostatic pressing. To simulate those processes, proper constitutive models were implemented into a finite element program (ABAQUS). Measured density distributions of metal powder compacts were also compared with finite element results and showed the same trend with simulated results. Residual stress distributions were calculated by finite element analysis to study the effect of ceramic ball inclusions with different thermal expansion coefficients. The higher residual stress was observed in a metal powder compact when the difference between thermal expansion coefficients for a ceramic ball and metal powder became larger. Samples produced by Wing showed more uniform density distributions and lower residual stresses compared to those by sintering after cold isostatic pressing. For various sizes of ceramic ball inclusions, densification and deformation of powder compacts were also studied during hot isostatic pressing.

• 한국분말재료학회지
• /
• 제2권3호
• /
• pp.223-230
• /
• 1995

The effects of Mn and Co additions up to 0.6 and 2.0 wt% respectively and the amount of cold-rolled reduction on the thermal expansion coefficient (TEC) of powder rolled Fe-Ni Invar strips were investigated. The compacted strips were sintered, homogenized and cold-rolled to the final thickness of 0.8 mm, 0.65 mm and 0.4 mm. All the strips reached full density except the case of 0.8 mm sample which has a very few porosities. The interstitials which are well known to increase TEC were minimized to the level of 10 rpm C,5 and N,0 by the processing. TEC was found to decrease by increasing the cold reduction. The Mn content had little effect on the TEC. But in Fe-Ni-Co system, TEC decreased with Co content up to 0.4 wt% and then increased, yielding the minimum value of $0.2 {\times} 10-6/^{\circ}C$ at 0.4 wt% Co. This value is much lower than that of commercial Invar product. Such effect of Co is considered to be related with the maxiumum spontaneous- magnetostriction effect.

• 한국추진공학회지
• /
• 제19권2호
• /
• pp.38-45
• /
• 2015

본 연구에서는 고고도의 저압환경 구현을 목적으로 사용되는 이젝터의 설계기법을 정립하고 상온가스를 이용한 실험을 통하여 성능변수와 형상변수에 따른 이젝터 작동 특성을 관찰하였다. 유량비, 압축비, 팽창비를 성능변수로 선정하고, 간극비를 형상변수로 선정하여 실험을 수행하였다. 실험결과 이젝터의 성능을 예측할 수 있는 성능변수들의 관계를 파악하였으며, 간극비 보다는 성능변수가 이젝터의 성능에 큰 영항을 미치는 것을 확인하였다.

• 대한기계학회논문집B
• /
• 제32권2호
• /
• pp.92-99
• /
• 2008

The "energy separation phenomenon" through a vortex tube has been a long-standing mechanical engineering problem whose operational principle is not yet known. In order to find the operational principle of the vortex tube, CFD analysis of the flow field in the vortex tube has been carried out. It was found that the energy separation mechanism in the vortex tube consists of basically two major thermodynamic-fluid mechanical processes. One is the isentropic expansion process at the inlet nozzle, during which the gas temperature is nearly isentropically cooled. Second process is the viscous dissipation heating due to the high level of turbulence in both flow passages toward cold gas exit as well as the hot gas exit of the vortex tube. Since the amount of such a viscous heating is different between the two passages, the gas temperature at the cold exit is much lower than that at the hot exit.

• 한국수소및신에너지학회논문집
• /
• 제27권4호
• /
• pp.349-356
• /
• 2016

Volumetric capacity metrics at cryogenic condition are critical for technological and commercial development. It must be calculated and reported in a uniform and consistent manner to allow comparisons among different materials. In this paper, we propose a simple and universal protocol for the determination of volumetric capacity of sorbent materials at cryogenic condition. Usually, the sample container volume containing porous sample at RT can be directly determined by a helium expansion test. At cryogenic temperatures, however, this direct helium expansion test results in inaccurate values of the sample container volume for microporous materials due to a significant helium adsorption, resulting significant errors in hydrogen uptake. For reducing this container volume error, therefore, we introduced and applied the indirect method such as 'volume correction using a non-porous material', showing a reliable cold volume correction.