• Journal of the Korean housing association
• /
• v.24 no.1
• /
• pp.21-31
• /
• 2013

This study focuses on the regional characteristics observed in the composition and floor plan of folk houses in the Young-cheon region situated in the Southern East inland of Gyungsangbukdo. According to the typical characteristics of the Korean folk house, Young-cheon region is supposed to be classified as the Young-Nam region. Our study shows that the open inverse 'ㄱ' type composition is the most common among others, which consists the living room, UtChae and one BoosokChae that serves as a living room and a farm shop. The typical floor plan is called 'Young Nam type' 'H$\hat{o}$tjib' composed of four rooms. Young Nam type of house has a wall in front of the room floor with a door to make the space with the room floor as the internal space. This can be explained by the climatic conditions in the Southern region of Gyungsangbukdo, which has a very cold winter and has a harsh spring wind in Young-cheon. The structural feature to which we should pay attention is the Young Nam type house has a gambrel roof. The evolutions of the house in the 70s are observed in the roof during the Saemaeul Movement from a hut to a modernized roof. In the 80s, the replacement of the heating system, expansion of rooms, modernization of kitchen, replacement of paper windows, modernization of roof, and construction of amenities had taken place to change the space, construction and structure following the modern house features.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.587-592
• /
• 2016

Bellows for LNG carriers must be corrosion resistant in order to operate in seawater environments. They must also have long fatigue lives in order to withstand the expansion and contraction caused by large temperature changes and continuous vibration in extreme environments. In order to incorporate these properties into bellow design, it is important to use materials that are resistant to cold brittleness and corrosion, and maintain their optimized forming condition. The design conditions and forming methods used for bellows must be optimized in order to incorporate these characteristics. In this study, finite element analysis was used to develop cryogenic bellows, which have good mechanical strength and reliability. In addition, two different forming methods (mechanical and hydroforming) were used to design and produce bellows, in order to derive their forming condition. The height, thickness, and hardness of the convolutions of bellows produced by each method were measured and compared with each other. The results confirmed that the two forming methods produced bellows with different mechanical properties.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.9
• /
• pp.1209-1219
• /
• 2003

The dynamic behaviors of the single vortex interacting with $CH_4-Air$ jet diffusion flame are investigated numerically. The numerical method is based on a predict-corrector scheme for a low Mach number flow. A two-step global reaction mechanism is adopted as a combustion model. Studies are conducted in fixed initial velocities for the three cases according as where $CO_2$ is added; (1) without dilution, (2) dilution in fuel stream and (3) dilution in oxidizer stream. A single vortex is generated by an axisymmetric jet, which is made by an impulse of a cold fuel when a flame is developed entirely in a computational domain. The simulation shows that $CO_2$ dilution in fuel stream results in somewhat larger vortex radius, and greater amount of entrainment of surrounding fluid than in other cases. Thus, the dilution of $CO_2$ in fuel stream enhances the mixing in single vortex and increases the stretching of the flame surface. The budgets of the vorticity transport equation are examined to reveal the mechanism of vortex formation when $CO_2$ is added. It is found that, in the case of $CO_2$ dilution in fuel stream, the vortex destruction due to volumetric expansion and the vortex production due to baroclinic torque are more dominant than in other cases.

• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.611-617
• /
• 2009

This paper reports an experimental study on the damage mechanism and resistance of Type I portland cement mortar and paste samples exposed to 5% sodium sulfate solution with different solution temperatures; namely, $4^{\circ}C$, $10^{\circ}C$ and $20^{\circ}C$. The resistance of mortar samples was evaluated using expansion, compressive strength and flexural strength measurements. Some microstructural observations such as x-ray diffraction, differential scanning calorimetry and scanning electron microscopy were also introduced to elucidate reactants formed by sulfate attack, especially in a low temperature condition. From the results, it was found that the degree of damage in the mortar samples was significantly associated with the temperature of sulfate solution. Low temperature of the sulfate solution led to the formation of thaumasite in mortar and paste samples, and subsequently a poor resistance to sulfate attack. Thus, it is noted that when concrete structures are exposed to sulfate media in the condition of a cold region or whether, special care should be taken.

• Journal of the Korean Institute of Rural Architecture
• /
• v.13 no.3
• /
• pp.21-28
• /
• 2011

This paper was able to indicate to the results the following thing that attempted a required potential development demand, through the contents and cost analysis in Rural Community Development Project. Nowadays, Rural Areas comparatively have a lot of development demands related to improvements environmental of residence life and construction of Urban-Rural Exchange Facility, on the other and, there is comparatively a few facilities demands regarding agriculture production. Demand is cold storage facilities and agricultural products direct sale facilities expansion to be able to raise value added of agricultural products as facilities related comparatively a little agriculture production, and an improvement of residence life comparatively has a lot of repair environmental uninhabited house repair, river-front and the roadside, rest shelter creation demands. However, that should be forecasted so that aging of rural, population decrease and development demand is caused by a lot of issues such as maintenances operation of many Urban-Rural Exchange Facilities and a similar program and content has a lot of them in bilateral adjacent zones. Therefore, in the future plan shall attempt efficiency operating facilities and a program through characterization and network of zone so that facilities and program can have complementary relation in the adjacent zones. And item development and an investor are necessary regarding new labor force supply for continuous value maintenance of space and returning to the farm that there were the reverse agriculture production and Amenity which are an rural village. Furthermore, developmental plan of rural village is necessary through the demand analyses that a citizen wishing for things.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.428-432
• /
• 2010

A study on the forming characteristics of outer shell structure for thrust chamber nozzle extension has been performed. In order to identify anisotropy of cold rolled sheet metal, three types of tensile specimens according to the direction to the sheet rolling axis were prepared and tested, and Landford's values were obtained using the results and applied to structural analysis. Forming characteristics of the outer shell structure of the nozzle extension are investigated through manufacturing and forming of the full scale outer shell structures, and strain values obtained by the forming processes are compared to the numerical analysis results. The results obtained by this study will be utilized to design forming tools and processes for manufacturing other outer shell structures which have a bigger expansion area ratio.

• Nuclear Engineering and Technology
• /
• v.49 no.4
• /
• pp.734-743
• /
• 2017

In order to investigate the swelling behavior and fuel-cladding interaction mechanism of U-10Zr alloy metallic fuel at very low burnup, an irradiation experiment was concisely designed and conducted on the China Mianyang Research Reactor. Two types of irradiation samples were designed for studying free swelling without restraint and the fuel-cladding interaction mechanism. A new bonding material, namely, pure aluminum powder, was used to fill the gap between the fuel slug and sample shell for reducing thermal resistance and allowing the expansion of the fuel slug. In this paper, the concise irradiation rig design is introduced, and the neutronic and thermal-hydraulic analyses, which were carried out mainly using MCNP (Monte Carlo N-Particle) and FLUENT codes, are presented. Out-of-pile tests were conducted prior to irradiation to verify the manufacturing quality and hydraulic performance of the rig. Nondestructive postirradiation examinations using cold neutron radiography technology were conducted to check fuel cladding integrity and swelling behavior. The results of the preliminary examinations confirmed the safety and effectiveness of the design.

• Cross-Cultural Studies
• /
• v.20
• /
• pp.113-148
• /
• 2010

This paper examines the American role in shaping South Korean nation-building during the early Cold War by considering how the United States attempted to form South Korea's education and how Koreans responded to these efforts. It looks at education as an arena where "American" ideas such as democracy and liberalism were received, transformed, and utilized by Koreans. This study pays particular attention to the gap between American intentions and Korean expectations, as well as to the competition between American and Japanese systems, which explains the contradictory role America played in South Korean nation-building. In order to better assess the role of the United States in shaping South Korean education, this article considers the complex dynamics between the Japanese legacies, American influence, and Korean actors. Americans had exerted a great effect on Korean education since the beginning of their relationship. American missionaries, U.S. military government, and educational mission teams had all contributed to the expansion of educational opportunities for Koreans. Through the educational institutions that they established or helped establish, Americans tried to spread "their" ideas. In this process, Americans had to struggle with two obstacles: Korean nationalism and the legacies of Japanese colonialism. Many Koreans used American missionary schools for their own purposes and resisted U.S. military government's policies which ignored their desire for self-determination. American education missions had limited effect on Korean education due to the heterogeneous Japanese system that was still influencing South Korea even after liberation. The ways in which Americans have influenced the democratization of South Korea have not been simple. Although "American" democratic ideas reached Koreans through various routes, Koreans understood the "American" idea within their own historical context and in a way that fit their existing socio-political relations. Oftentimes suspicious of "American" democracy, Koreans developed their own concept of democracy. The overall American influence on Korean democratization, as well as on Korean education, was important but limited. While Americans helped Koreans build educational infrastructure and tried to transfer democratic ideas through it, Koreans actors and Japanese colonial legacies limited its impact.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.137-142
• /
• 2008

Ignition characteristics of combustion chamber with LOx lead cyclogram for liquid rocket engine were described. The combustion chamber has chamber pressure of 60 bar, propellant mass flow rate of 89 kg/s, and nozzle expansion of 12. Cold flow test to determine the filling time of propellant for cyclogram with LOx lead supply, ignition test to check the ability to ignite starting fuel from the ignitor, low pressure combustion test to check the propagation of flame into main fuel-oxidizer mixture from starting fuel and the main combustion stage, and design point combustion test to check the combustion performance were performed. Ignition and combustion tests with LOx lead supply were successfully performed and the stable cyclogram of start sequence for combustion chamber was developed.

• The Journal of the Petrological Society of Korea
• /
• v.1 no.2
• /
• pp.91-103
• /
• 1992

Eruptive mechanisms and processes at Udo tuff cone can be inferred from indicative characters of products, bedforms and lithofacies, and ring faults. In terms of bedforms and lithofa-cies in particular, massive lapilli tuff beds and chaotic lapilli tuff beds are derived from subaerial falls of aggregated tephra of wet tephra finger jets, occurring dominantly at the lower sequences of proximal part at the tuff cone. Crudely stratified lapilli tuff are derived from subaerial falls of slightly aggregated tephra of less wet tephra finger jets, whereas reversely graded lapilli tuff beds are from slightly disaggregated subaerial falls of continuous uprush. Both beds frequently occur in the middle sequences at proximal and near medial part of the tuff cone. Block and lapilli tephra lenses, ash-coated lapilli tephra beds(lenses) and thin-bedded tuff beds are derived from extremely disaggregated subaerial falls of dry tephra in the continuous uprush, frequently occurring at the upper sequences of medial part at the tuff cone. Udo tuff cone is a basaltic volcano emergent through the sea water surface while water could flood across or into the vent area. Emergence of the tuff cone was from the type-Surtseyan eruption characterized by earlier tephra finger jets and later continuous uprush columns of tephra with copious volumes of steam. Explosions began when boiling of wter produced a bubble column reducing the hydrostatic pres-sure, allowing exsolution of gases from the magma. This expansion of magma into a vesiculating froth fragmented the magma and permitted mixing of magma and water so that a more vigorous generation of steam could proceed. Tephra finger jetting explosions continued to build the crater rims, then remove water from the vent that their deposits flowed like slsurries until the continuous uprush explosion ensued. Continuous uprush explosions were associated with most rapid accumula-tion of tephra. The increasing volume rate led to partial removal of water from the vent area by the newly tephra ring so that more vigorous activity could be attended by a reducing water supply. This might restrain surplus of cold water entering the vent and thus enhance the vigour of the eruption by allowing optimal heat exchange. Eventually the crater became so deep and unsuported that piecemeal sliding, or massive subsidence on indipping ring faults, filled and closed the vent, and the cycle of explosions and collapse began anew.