• Tribology and Lubricants
• /
• v.32 no.6
• /
• pp.183-188
• /
• 2016

Engine oil plays an important role in the mechanical lubrication and cooling of a vehicle engine. Recently, engine development has focused on the adoption of gasoline direct injection (GDI) and turbocharging methodology to achieve high-power and high-speed performance. However, oil dilution is a problem for GDI engines. Oil dilution occurs owing to high-pressure fuel injection into the combustion chamber when the engine is cold. The chemical components of engine oil are currently developed to accommodate gasoline fuel; however, bio-alcohol mixtures have become a recent trend in fuel development. Bio-alcohol fuels are alternatives to fossil fuels that can reduce vehicle emissions levels and greenhouse gas pollution. Therefore, the chemical components of engine oil should be improved to accommodate bio-alcohol fuels. This study employs a 2.0 L turbo-gas direct injection (T-GDI) engine in an experiment that dilutes oil with fuel. The experiment utilizes a variety of fuels, including sub-octane gasoline fuel (E0) and a bio-alcohol fuel mixture (Ethanol E3~E7). The results show that the lowest amount of oil dilution occurs when using E3 fuel. Analyzing the diluted engine oil by measuring density and moisture with respect to kinematic viscosity shows that the lowest values of these parameters occur when testing E3 fuel. The reason is confirmed to influence the vapor pressure of the low concentration bio-alcohol-fuel mixture.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.12
• /
• pp.991-997
• /
• 2014

This study investigated the swirling flow fields of a gun-type gas burner (GTGB) without a combustion chamber under cold flow conditions. Three velocity components and the static pressure were measured with a straight-type five-hole pressure probe (GHPP) using a non-nulling calibration method and compared with the results of an X-type hot-wire probe (X-probe) and computational fluid dynamics (CFD). The GHPP measured the velocity and static pressure for the swirling flow of the central region of the GTGB better than the X-probe but produced slightly worse results than the CFD.

• Plant Resources
• /
• v.7 no.1
• /
• pp.29-35
• /
• 2004

Root chicory (Cichorium intybus L. var. sativus) is potential alternative medicinal and sugar crop which accumulates a high amount of linear polyfructan, inulin in its roots. A problem in root production is that over-wintered stock plants often flower. Once the plant becomes reproductive, stem elongation and root growth slows and floral buds arise from every node, rendering the plants useless for propagation. The objectives of this research was to examine the effectiveness of manipulating environmental factors containing photoperiod, temperature and number of leaf states. The experiment was performed in growth chamber to create two photoperiods (8 h, and 16 h) with three temperature regimes (5$^{\circ}C$/3$^{\circ}C$, 1$0^{\circ}C$/8$^{\circ}C$ and 15$^{\circ}C$/13$^{\circ}C$ day/night temperature) for a total of six treatments on three type of true-leaf stage of plant. Data of bolting rate, shoot and root length, shoot and fresh weight was invetigated in each treatments. This is the first report on changes in bolting rate and shoots and roots production during a whole growing season and differences in the effect of cold and photoperiod treatment depending on the true-leaf stage of plant.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.17 no.1
• /
• pp.8-17
• /
• 2021

The seat leakage test is required after the maintenance work on the valve seat. Either the test has been performed outside of the plant after cutting the valve from the pipe system or the simplified test has been performed so far. It was unable to perform the test at the plant site because it is hard to make a steady pressure on the valve inlet when it is installed in the pipe. This research aims to perform the leakage test in the nuclear power plant while it is installed in the pipe system. The mock-up test is performed by pressurizing the leak-off pipe on the valve body. The result is compared with traditional test result by pressurizing the valve inlet. Furthermore the chamber mock-up tests are performed under various conditions. The leak rate by the developed test using the leak-off pipe is found to be similar but greater than the leak rate by the existing test method. It implies that the test using the leak-off pipe is more conservative than the existing test. The methodology and the equipment which this paper suggests that on-site seat test is possible and the application of the technology could reduce the time and cost for the valve maintenance work significantly.

• Reproductive and Developmental Biology
• /
• v.37 no.3
• /
• pp.155-159
• /
• 2013

This study was carried out to investigate synthetic extender for semen cryopreservation of Jeju Native Black Bull. The semen was collected using an artificial vagina and transported to the laboratory. The semen was diluted 1:1 by Tris-Egg yolk extender and contrifuged in 1,500 rpm for 15 minutes. The supernatant was removed. The pellect was diluted to final sperm concentration of $2{\times}10^8/ml$ by doubling in every 30 minutes at $4^{\circ}C$ cold chamber. The semen was equilibrated for 4 hours at cold chamber and packed to 0.5 ml straw. The semen straws were located above 5 cm for 10 minutes. The height and duration affect the freezing speed by temperature. The frozen straw was plunged to $LN_2$. The presented straws were examined the viability and motility after thawed at $37^{\circ}C$ water bath. Frozen-thawed sperm were evaluated sperm viability, membrane integrity and acrosome integrity. Post-thawed sperm viability has been significantly higher (p<0.05) in fresh sperm ($93.27{\pm}1.62%$) than frozen-thawed sperm ($73.34{\pm}3.27%$). However, there were no significant differences between fresh and frozen-thawed dead cell rate ($7.35{\pm}2.63$ vs, $13.71{\pm}2.85$). In sperm motility, between Triladyl and AndroMed Extender, there was no significant different ($72.86{\pm}2.83$ vs, $81.47{\pm}2.48$), similarly, the dead cell rates was similar ($18.41{\pm}3.42%$ and $17.26{\pm}4.25$). The results of our study suggest that AndroMed to the freezing extender showed more positive effect on the frozen-thawed spermatozoa in Jeju Native Black bull semen.

• Journal of Embryo Transfer
• /
• v.26 no.1
• /
• pp.65-70
• /
• 2011

This study was conducted to investigate the survival rate of AndroMed and Tris-egg yolk extender for cryopreservation of Korean Native Bull Semen (Chick Cow). Semen was collected from a Korean Native Bull Semen over 3 year's old. The semen was diluted 1:1 by AndroMed and Tris-egg yolk extender. The pellet was diluted to final sperm concentration of $5{\times}10^7$ cell/ml by doubling in every 10 minutes at $4^{\circ}C$ cold chamber. The semen was equilibrated for 1 hrs at cold chamber and packed to 0.5 ml straw. The semen straws were located above 5 cm of liquid nitrogen for 5 minutes. And then the frozen straw was plunged to LN2. The presented straws were examined the viability and motility after thawed at $37^{\circ}C$ water bath. The survival rates was significantly higher (p<0.05) in Tris-egg yolk extender than AndroMed extender ($89.7{\pm}19.8$ vs. $73.4{\pm}11.2$). However, motility was no significant differences ($78.4{\pm}18.7$ vs. $67.9{\pm}14.6$). Survival rate in time of equilibration between visual and CASA program had higher in 2 h ($86.33{\pm}9.4$ vs. $92.32{\pm}12.4$) than in 5 h ($78.20{\pm}7.8$ vs. $88.28{\pm}13.1$) 15 h ($65.24{\pm}6.6$ vs. $76.48{\pm}17.3$) 20 h ($56.26{\pm}4.6$ vs. $67.73{\pm}18.4$). The development rates to cleavage was higher in Tris-egg yolk extender than AndroMed extender (82.2% vs. 81.7%). Similarly, the development rates to blastocyst was significantly higher (p<0.05) in Tris-egg yolk extender than AndroMed extender (42.3% vs. 29.6%). In conclusion, the obvious impact of this study will be its practical application to improve viability and fertilizing ability of cryopreserved spermatozoa used for in vitro fertilization (IVF) and AI, Which in turn will be beneficial to animal genetic resources conservation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5877-5884
• /
• 2014

Recently, abnormally cold weather has been reported more frequently in winter due to the climate change and abnormal weather changes. On the other hand, the heating capacity of a railcar may be not enough to warm the cabin under severe cold climatic conditions, which is one of the reasons for the passengers' complaints about heating. In this study, the effects of ambient temperature and heater power on the cabin temperature was investigated to obtain the minimum ambient temperature for the tested railcar. The test railcar was placed in a large-climatic chamber, and various ambient temperature conditions were simulated. The effects of the heater output were investigated by monitoring the cabin temperature under a range of heater output conditions. The mean cabin temperature was $14.0^{\circ}C$, which was far lower than the required minimum temperature of $18^{\circ}C$, under a $-10^{\circ}C$ ambient temperature condition with the maximum heat power. When the ambient temperature was set to $0^{\circ}C$ and $10^{\circ}C$, the maximum achievable cabin temperature was $26.1^{\circ}C$ and $34.0^{\circ}C$. Through calculations using the interpolation method, the minimum ambient temperature to maintain an $18^{\circ}C$ cabin temperature was $-6.7^{\circ}C$ for this car. The vertical temperature difference was higher with a higher power output and higher ambient temperature. The maximum vertical temperature difference was higher than $10^{\circ}C$ in some cases. However, the horizontal temperature difference vs. low temperature (< $2^{\circ}C$) was independent of the power output and ambient temperature. As a result, it is very important to reduce the vertical temperature difference to achieve good heating performance.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.223-229
• /
• 2022

This study was conducted to investigate the effect of packaging methods and sterilization treatment on storability and microbial control in paprika fruits. When treated with chlorine dioxide gas for 3, 6, and 12 hours and cold plasma gas for 1, 3, and 6 hours, and then packed in a carton box and stored in a 8 ± 1℃ chamber for 7 days, chlorine dioxide treated 12 hours and plasma treated 6 hours was prevented the development of E·coli and YM(yeast and mold). Accordingly, the control was treated with chlorine dioxide for 12 hours and plasma for 6 hours, packed using a carton box and 40,000 cc·m^-2·day^-1·atm^-1 OTR film (MAP), and stored in a 8 ± 1℃ chamber for 20 days. Fresh weight loss rate during storage was less than 1% in the MAP treatments, and the visual quality of the MAP treatments was above the marketability limit until the end of storage. There was no difference in the contents of oxygen, carbon dioxide, and ethylene in the film. In the case of firmness, the chlorine dioxide treatments was low, and the Hunter a^* value, which showed chromaticity, was highest in the Plasma 6h MAP treatment. Off-odor was investigated in the MAP treatments, but it was very low. The rate of mold growth on the fruit stalk of paprika was the fastest and highest in the chlorine dioxide treated box packaging treatments, and the lowest in the chlorine dioxide treated MAP treatments at the end of storage. The aerobic count in the pulp on the storage end date was the lowest in the plasma treated box packaging treatments, the lowest number of E·coli in the chlorine dioxide treated MAP treatments, and the lowest yeast & mold in the chlorine dioxide treated box packaging treatments. As a result, for the inhibition of microorganisms during paprika storage, it is considered appropriate to treat plasma for 6 hours before storage regardless of the packaging method.

• Korean Journal of Environmental Agriculture
• /
• v.5 no.2
• /
• pp.141-148
• /
• 1986

The blue-light effect on the grown as well as on the physiological activity of some major horticultural plants in Korea has been investigated. The light quality used for the work was obtained from sunlight filtered by an orangecolored polyethylene film which removed about 70% of visible light in the spectral region of $350㎚{\sim}500㎚$. The film was developed in this laboratory especially for the work and named BCR film meaning blue color-removing film. The light environment in the plastic house which was built with BCR film provided plants with the blue color-deficient sunlight. Thus, the photobiological effect of blue light could be examined conversely by comparing with the effect of white sunlight in a conventional plastic house built with colorless polyethylene film. In a sense of applicability to horticulture, two remarkable effects of the blue color-deficient sunlight on plant physiology were observed: First, it enhanced to a great extent the growth activity of plants-pepper, cucumber, zucchini, tomato, and leaf lettuce at the vegetative stage as well as at the reproductive stage, as demonstrated by their yield which were in average $40{\sim}50%$ increased compared with the control (under white sunlight). Second, it improved significantly the cold tolerance of plants, as exhibited with their resistance to chilling during treatment in a cold chamber maintained at a temperature which caused chilling injury to the plants of control. The visualized effects were reflected on the physiological activity of cells on organelle level. Chloroplast isolated from the plant leaves grown under BCR film showed considerably stronger photosynthetic activity, as judged by the increased electron transport rate of illuminated chloroplast, than that from leaves grown under white PE film. Mitochondria from leaves grown under BCR film maintained normal respiration activity until temperature decreased to a few degree($^{\circ}C$) lower than the temperature which caused respiratory inhibition to mitochondria obtained from leaves of the control.

• Korean Journal of Plant Resources
• /
• v.31 no.4
• /
• pp.363-371
• /
• 2018

Tiarella polyphylla D. Don is a native plant distributed only in Ulleung Island in Korea and has been traditionally used for medicinal purposes, although it is also used ornamentally. This study was conducted to determine the requirements for dormancy break and germination and to classify the type of seed dormancy. The experiments were performed with cold stratification (0 or 12 weeks at $5^{\circ}C$), warm stratification (0, 4, 8, or 12 weeks at $23^{\circ}C$, followed by 8 weeks at $5^{\circ}C$, and then incubation at $23^{\circ}C$), and $GA_3$ treatments (0, 10, 100, or 1000 mg/L). The treated seeds were incubated on aseptic media at room chamber ($23^{\circ}C$, a 16h photoperiod of fluorescent lamps with $40{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$). The seeds were dispersed in nature as underdeveloped embryos with no physical barrier to absorb water to prevent water absorption. However, the seeds did not germinate for 30 days after sowing without any pre-treatments. Thus, the seeds had morphological dormancy (MD) and physiological dormancy (PD). The final germination percentage following cold stratification (0 or 12 weeks) was 66.7% and 45.6%, respectively. The cold stratification delayed seed germination by about 3 weeks. In the warm stratification experiment (0, 4, 8, or 12 weeks), the final germination percentage was 21.1%, 27.8%, 41.1%, and 57.8%, respectively, 20 weeks after sowing. The embryos of the T. polyphylla seed grew in relatively warm temperatures ($23^{\circ}C$). $GA_3$ application overcame seed dormancy and promoted germination. Following $GA_3$ treatment (0, 10, 100, or 1000 mg/L), the final germination percentage was 33.3%, 45.0%, 42.5%, and 72.5%, respectively. These results suggest that the T. polyphylla seeds had non-deep simple morphophysiological dormancy (MPD) and $GA_3$ treatment could be used as a substitute for warm stratification for breaking seed dormancy. To our knowledge, this is the first report of seed dormancy characteristics of the genus Tiarella native to Korea.