• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.2
• /
• pp.35-41
• /
• 2009

Both the nozzle expansion ratio and the chamber pressure are simultaneously and continuously changed according to pintle movement, resulting in a different internal flow structure and flow separation characteristics. In this paper, the pintle position effect on nozzle flow structure and separation phenomena is analyzed by experimental-aided Computational Fluid Dynamic(CFD). Among the turbulent models for RANS(Reynold Averaged Navier Stokes) in Fluent, Spalart-Allmaras model is better agreement with the nozzle wall pressure distribution attained by cold-flow test than other models. And even if a conical nozzle is used, there is a shock structure similar to cap-shock pattern mainly occurred in contoured or shaped optimized nozzle because of internal shock generated from pintle tip flow separation.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.43-50
• /
• 2021

The properties of materials which are widely used in industry fields like automobile, shipbuilding, casting, and electronics are strongly needed to have higher surface hardness, lower surface roughness, and higher compressive residual stress. As mentioned above, for the purpose of satisfying three factors, a variety of researches with respect to surface improvement have been actively studied and applied to every industry. SKD61 which is mostly used for die casting process of cold chamber method must meet a countless number of problems which are thermal, mechanical and chemical from highly specific working environment at high temperature over 600℃. Above all, in case of plunger sleeves used for die casting process, thermal fatigue has a bad effect on the surface of an inlet where molten metal is repeatedly injected. On account of it, plunger sleeves cause manufacturers to deteriorate quality of products. Therefore, in this paper, to improve the surface of an inlet of plunger sleeve, multilayer PVD coating using Ti, Cr and Mo is suggested. Furthermore, The surface characteristics such as surface roughness(Rsa, Rsq), surface hardness(HRB, HRC) and residual stress using XRD(X-ray diffractometer) of coated samples and specimens are studied and discussed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.27 no.1
• /
• pp.27-36
• /
• 2023

To understand the atomization performance in gas-liquid swirl-coaxial injector applied to a small rocket engine, a cold-flow test was performed by varying the design parameters and supply condition of propellants. As the swirl-chamber diameter and the angle of the convergent section, which are design parameters of injector increased, the spray performance of the injector improved by increasing the swirl strength. In addition, as the gas-liquid momentum-flux ratio increased, the gas flow separated some of the droplets from the liquid film, and a gas-droplet mixture core was formed in the center of the spray sheet.

• Journal of Bio-Environment Control
• /
• v.26 no.2
• /
• pp.64-71
• /
• 2017

The study was performed on the effects of crop load of pear (Pyrus pyrifolia Nakai) trees on shoot growth, reserved nutrients, and fruit production for two years, as well as regrowth of cuttings treated with various cold temperatures in 2012 and 2013. Crop load adjustments included three levels of fruiting; 54 (60%), 90 (100%), and 126 fruits per tree (140%). As increasing crop load from 60% to 140%, water sprout growth decreased, and one-year old shoot resulted in declined concentrations of total carbon, macro-nutrients, and free sugar. The 140% of crop load greatly increased fruit yield of approximately 35 tons per ha in both 2011 and 2012 but slightly reduced weight, size, and soluble solid contents in fruit. However, 140% of crop load increased annual production income to approximately over 10 million won compared to the 60% and 100% of crop load. Germination rates in the cuttings did not rapidly decrease up to $-20^{\circ}C$ in a growth chamber condition. The 140% of crop load decreased germination rates less than 70% of cuttings grown under $-30^{\circ}C$. Amounts of electrolyte leakage in the cuttings under various cold temperatures were not significantly different among the adjustment of crop load.

• Journal of Radiation Protection and Research
• /
• v.39 no.1
• /
• pp.21-29
• /
• 2014

A new cold neutron triple-axis spectrometer (Cold-TAS) was recently constructed at the 30 MWth research reactor, HANARO. The spectrometer, which is composed of neutron optical components and radiation shield, required a redesign of the segmented monochromator shield due to the lack of adequate support of its weight. To shed some weight, lowering the height of the segmented shield was suggested while adding more radiation shield to the top cover of the monochromator chamber. To investigate the radiological effect of such change, we performed MCNPX simulations of a few different configurations of the Cold-TAS monochromator shield and obtained neutron and photon intensities at 5 reference points just outside the shield. Reducing the 35% of the height of the segmented shield and locating lead 10 cm from the bottom of the top cover made of polyethylene was shown to perform just as well as the original configuration as radiation shield excepting gamma flux at two points. Using gamma map by MCNPX, it was checked that is distribution of gamma. Increased flux had direction to the top and it had longer distance from top of segmented shield. However, because of reducing the 35% of the height, height of dissipated gamma was lower than original geometry. Reducing the 35% of the height of the segmented shield and locating lead 10cm from the bottom of the top cover was selected. After changing geometry, radiation dose was measured by TLD for confirming tester's safety at any condition. Neutron(0.21 ${\mu}Svhr^{-1}$) and gamma(3.69 ${\mu}Svhr^{-1}$) radiation dose were satisfied standard(6.25 ${\mu}Svhr^{-1}$).

• The Korean Journal of Zoology
• /
• v.32 no.3
• /
• pp.275-280
• /
• 1989

Present study examined the endogenous release of luteinizing hormone releasing hormone (LHRH) from superiused hypothalamic sBces derived from Korean native cattie (KNC). In addition, the in vitro secretory pattern of LHRH release in '(NC was compared with that in imported cattle such as Holstein cow. The median eminences (ME) of hypothalamic tissues were disseded out, sliced and quici'ly placed in ice-cold superfilsion chamber. Superhision chambers containing ME slices were maintained in a constant temperature water-bath at 37$^{\circ}C$. Effluents were colleded on ice at 10 min intervals for a 4 hr superfusion period, and kept -2$0^{\circ}C$ prior to LHRH radloimmunoassay. LHRH release was analyzed by the PULSAR algorithm. The spontaneous release of LHRH from both cows was episodic during a 4 hr superhision period. The mean LHRH release, pulse amplitude and pulse interval m KNC were 11.08 $\pm$ 1.50 pg/min/mg x 10-$^2$, 21.43 1 7.28 pg/mg x 10-$^2$, and 39.42 $\pm$ 3.08 min, which were quite similar to those observed in Holstein cows. The basic charaderistics of the LHRH pulse generator of '(NC appears important for a better understanding about the endocrine function of KNC.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.1
• /
• pp.13-24
• /
• 2008

This Chapter mentioned Terror and Palpitation due to Fright(驚悸) and Hemorrhagic disease(血證). Terror and Palpitation due to FrightAcctually Terror(驚) is different from Palpitation(悸). Terror(驚) is one of the seven emotions. But in this case, It refer to the Palpitation and the uneasiness of mind due to one's hearing a strange sound of seeing a strange. Tremulous Pulse can be appear. So Terror(驚) is caused by Exopathic Factors(外因) and belongs to Excess syndrome(實證). Palpitaion(悸) is the sensation of plamus, palpitation and unrest not because of being frightened. It is usurally caused by the deficiency of Ki(氣) and blood(血). So Deep, Thready and weak pulse can be appear. So Palpitaion(悸) is caused by Endopathic Factors and belongs to Deficiency Syndrome. In this Chapter, Terror and Palpitation due to Fright(驚悸) treat with the Kyeji-ke-jakyak-ka-chokchil-moryu-yongkol-kuyuk-tang(桂枝去芍藥加蜀漆牡蠣龍骨救逆湯) and Banha-mahwang-hwan(半夏麻黃丸). There are two type in Hemorrhagic disease(血證). One is bleeding(出血) and another is blood stasis(瘀血). The contents which relate with the Hemorrhagic disease(血證) are Hematemisis(吐血), Rhinorrhagia, Hemafecia(下血). In hemorrhage pathological mechanisms, there are two mechanisms. One is that Fire and Heat(火熱) pressure blood. Another is that cold and deficiency(虛寒) disable Ki(氣) from keeping blood flowing within vessels. Blood stasis(瘀血) can be called Extravasated Blood(惡血), Coagulated Blood, Blood retention(蓄血,積血), Dead Blood(死血) and Emaciation due to Blood disorder(乾血). It refer to a morbid state of unsmooth circulation and blood stagnancy often resulting from Ki(氣) stagnation, Ki(氣) deficiency and accumulation of pathogenic coldness. The symptom of Blood stasis are 'Fullness sensation in the chest, Lip Flaccidity, Cyonotic Tongue and Dryness of Mouth'. And the man who have Blood stasis, want to rinse his mouth with the water, but he can't drink the water because there isn't interior Heat of Excess Type. The symptom of Cyonotic Tongue(舌靑) had influence on diagnosing Blood stasis(瘀血) in offspring.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.1
• /
• pp.32-50
• /
• 2008

This study is concerned with examining the causes and symptoms of Woman various diseases and clearing up the situations of pulses and their treatment. Woman various diseases are said to be various kinds of diseases including the disorder of menstruation and genitals except pregnancy and postpartum diseases. The main contents are the penetration of heat into worm, the discharge of much blood, stomachache, and the postpartum cyst diseases. Among them, the nature of the diseases which often occur in the gynecology, such as the menstrual diseases and stomachache, were described comparatively in detail. The reason why heat penetrates into the worm is that the external germs come into it under its weakness. To treat it, heat should be removed and lumping blood should be sent out of body. Especially only after whether the disease is serious or not is examined, and just after the process of the disease is examined, the lumping blood can be eliminated. The ways to cure it by sweating a patient too much, getting him or her to vomit, or forcing him or her to be urinated too much, should be avoided. The disorder of menstruation, as the disease which most often occur among the diseases of gynecology, includes menstrual irregularity and blood discharge, and non-menstruation. Among them, non-menstruation and blood discharge are comparatively often discussed. When they are treated, lumping blood and cold energy should be cured well through getting rid of the lumping blood and making the blood vessel flow well. The difficult urination after childbirth, which comes from the weak urinary cist, makes symptoms such as the stuffy chest, the difficulty of lying down, and breathing with his or her back something. To urinate better, the ability of the urinary cist should be supplemented and improved. The principle of the treatment for Woman various diseases is to examine the situation of the pulse closely, then set up the way to treat it, and prescribe a patient. In this study, besides the treatment of Chinese herb medicine, the medicine for washing genitals and the medicine placed in the worm were used to cure Woman various diseases. This treatment is the beginning of the surgical treatment in the gynecology.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.190-190
• /
• 1999

박막 표면에 대한 경원소 분석법인 탄성 되튐 반도법을 개발하여 수소, 탄소, 질소등 분석에 이용하고 있다. 이때 입사 입자로 Cl 9.6MeV를 이용하였는데, 표적 표면에 탄소막이 흡착되는 현상을 발견하였다. cold trap 및 cold finger를 사용하여 진공도를 개선하므로서, 탄소막 흡착의 한 원인으로 알려져 잇는 chamber 주변의 진공도 변화를 시켜보았다. 하지만 전혀 탄소막이 생기지 않는 10-10torr 이하 진공을 만드는 것은 많은 비용과 장비를 필요로 하는 상당히 힘든 작업이어서, 이차적으로 탄소막이 표적 표면에 달라 붙게 하는 원인으로 추정되는 이차 전자의 발생을 고에너지 이온빔으로 조사하였다. 일반적으로 이차전자의 발생은 이온빔과 표적과의 충돌에 의한 고체 표면으로부터의 전자방출 현상으로 오래전부터 연구되어져 왔다. 여기에는 두가지 다른 구조가 존재하는 것으로 알려져 있다. 그 중 하나는 입사 입자의 전하와 표적 표면사이 작용하는 potential 에너지가 표적 표면의 일함수(재가 function) 보다 클 때에 일어나는 potential emission이다. 즉 표적 궤도에 존재하는 전자와 입사 이온빔 사이의 potential 이 표적의 전자를 들뜨게 만들고, 이 potential의 크기가표적의 표면 장벽 potential 보다 충분히 클 뜸 전자가 방출하는 현상을 말한다. 다른 또 하나의 방출구조로는 입사 이온이 표적 표면의 원자와의 충돌에 의해 직접저인 에너지 전달을 통한 전자 방출을 말하는데, 이를 kienetic emission(이하 KE)이라 한다. 본 연구에서는 Tandem Van de graaff 가속기로 고에너지 이온빔을 만들어 Au에 충돌시키므로서 kinetic emission을 통하여 Au에서 발생한는 이차전자의 방출 수율 및 에너지를 측정하였다.장구조로 전체 성장 양식을 예견할 수 있다. 일반적인 경향은 Ep가 커질수록 fractal 성장형태가 되며, Ed가 적을수록 cluster 밀도가 작아지나, 같은 Ed+Ep에 대해서는 동일한 크기의 팔 넓이(수평 수직 방향 cluster 두께)를 가진다. 따라서 실험으로부터 얻은 cluster의 팔 넓이로부터 Ed+Ep 값을 결정할 수 있고, cluster 밀도와 fractal 차원으로부터 각각 Ed와 Ep값을 분리하여 얻을 수 있다. 또한 다층 성장에 대한 거칠기(roughness) 값으로부터 Es값도 구할 수 있다. 양방향 대칭성을 갖지 않은 fcc(110) 표면과 같은 경우, 형태는 다양하지만 동일한 방법으로 추정이 가능하다. (110) 표면의 경우 nearest neighbor 원자가 한 축으로 형성되고 따라서 이 축과 이것과 수직인 축에 대한 상호작용이나 분산 장벽 모두가 비대칭적이다. 따라서 분산 장벽도 x-축, y-축 방향에 따라 분리하여 Edx, E요, Epx, Epy 등과 같이 방향에 따라 다르게 고려해야 한다. 이러한 비대칭적인 분산 장벽을 고려하여 KMC 시뮬레이션을 수행하면 수평축과 수직축의 분산 장벽의 비에 따라 cluster의 두께비가 달라지는 성장을 볼 수 있었고, 한 축 방향으로의 팔 넓이는 fcc(100) 표면의 경우 동일한 Ed+Ep값에 대응하는 팔 넓이와 거의 동일한 결과가 나타나는 것을 볼 수 있다. 따라서 이러한 비대칭적인 모양을 가지는 성장의 경우도 cluster 밀도, cluster 모양, cluster의 양 축 방향 길이 비, 양 축 방향의 평균 팔 넓이로부터 각 축 방향의 분산 장벽을 얻어낼 수 있을 것으로 보인다. 기대할 수 있는 여러 장점들을 보고하고자 한다.성이 우수한 시편일수록 grain의 크기가 큰 것으로 나타났고 결정성이 우수한 시편의 경우에서는 XR

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.555-565
• /
• 2021

The goal of this study is to improve flow and noise performances of existing backward-curved blade centrifugal fan system used for circulating cold air in a refrigerator freezer by optimally designing airfoil shape. The unique characteristics of the system is to drive cold airflow with two volute tongues in combination with duct system in a back side of a refrigerator without scroll housing generally used in a typical centrifugal fan system. First, flow and noise performances of existing fan system were evaluated experimentally. A P-Q curve was obtained using a fan performance tester in the flow experiment, and noise spectrum was measured in an anechoic chamber in the noise experiment. Then, flow characteristics were numerically analyzed by solving the three-dimensional unsteady Navier-Stokes equations and noise analysis was performed by solving the Ffowcs Williams and Hawkins equation with input from the flow simulation results. The validity of numerical results was confirmed by comparing them with the measured ones. Based on the verified numerical method, blade inlet and outlet angles were optimized for maximum flow rate using the two-factor central composite design of the response surface method. Finally, the flow and noise performances of a prototype manufactured with the optimum design were experimentally evaluated, which showed the improvement in flow and noise performance.