• Transactions of Materials Processing
• /
• v.24 no.4
• /
• pp.293-298
• /
• 2015

A safety vent is crucial to protect its user from unpredictable explosions caused by increasing internal pressure of the lithium-ion batteries. In order to prevent the explosion of the battery, a safety vent rupture is required when the internal pressure reaches a critical value. In conventional manufacturing, the cap plate and the safety vent are fabricated separately and subsequently welded to each other. In the current study, a manufacturing process including a backward extrusion and coining process is suggested to produce an integral safety vent which also has the benefit of increasing production efficiency. FE simulations were conducted to predict the rupture pressure and to design the safety vent using a ductile fracture criterion and the element deletion method. The critical value, C, in the ductile fracture criterion was obtained from uniaxial tensile tests with an annealed sheet of 1050-H14 aluminum alloy. Rupture tests were preformed to measure the rupture pressure of the safety vent. The results met the required rupture pressure within 8.5±0.5 kgf/cm². The simulation results were compared with experimental results, which showed that the predicted rupture pressures are in good agreement with experimentally measured ones with a maximum error of only 3.9%.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.3
• /
• pp.1-9
• /
• 2007

This paper deals with manufacturing conditions to increase the working die's life span which are the key factor in the manufacturing process of the coins and medals. Using the boundary element method, the stress diagram for the coining die was obtained, which was used to find the life span of working die. To iud the working die's life span related to the diameter of collar and blank coin, eight different sizes were tested and the optimal condition was obtained. With the adjusted impressing force, the working die's life span was increased up to 60 percent.

• Proceedings of the CALSEC Conference
• /
• 2001.08a
• /
• pp.105-109
• /
• 2001

성형의 종류 ◈금속 성형 ㆍ 스탬핑(Stamping) ㆍ 정밀 블랭킹(Fine Blanking) ㆍ 딥 드로잉(Deep Drawing) ㆍ 다이캐스팅(Die Casting) ㆍ 인베스트먼트 주조(Investment Casting) ㆍ 분말 야금(Power Metallurgy) ㆍ 인발(Wire Drawing) ㆍ 압출(Extrusion) ㆍ 단조(Forging) ㆍ ㆍ코이닝(Coining) ㆍ... ◈비금속 성형 ㆍ 사출(Injection) ㆍ 압축(Compression) ㆍ 블로우 성형(Blow Molding) ㆍ 진공 성형(Vacuum Molding) ㆍ 발포 성형(Foam Molding) ㆍ 피복(Encapsulation) ㆍ 회전식(Rotational) ㆍ 주조(Casting) ㆍ 적층(Laminating) ㆍ 압출(Extrusion) ㆍ...(중략)

• The Mathematical Education
• /
• v.46 no.3
• /
• pp.245-261
• /
• 2007

This paper deals with the possible problems which may arise when students learn the names of elementary geometric figures in the languages of Korean, Chinese, English. The names of some simple geometric figures in these languages are analyzed, and a specially designed test was administered to some grade eight students from the three language groups to explore the possible influence of the characteristics of the languages on students' capability in identifying the figures, the way students define the figures, and students' understanding of the inclusive relationship among figures. It was found that the usage of the terms to describe geometric figures may indeed have affected students' understanding of the figures. The names of geometric figures borrowed from those of everyday life objects may cause students to fix on some attributes of the objects which may not be consistent with the definition of the figures. Even when the names of the geometric figures depict the features of the figures, the words used in the naming of the figures may still affect students' understanding of the inclusive relations. If there is discrepancy between the definition of a geometric figure and the features that the name depicts, it may affect students' understanding of the definition of the figure, and if there is inconsistency in the classification of figures, it may affect students' understanding of the inclusive relationship involving those figures. Some implications of the study are then discussed.

• Korean Institute of Interior Design Journal
• /
• v.21 no.1
• /
• pp.103-110
• /
• 2012

With a theoretical focus on the emotional experiences created via the interface, and the relationship between human beings and space, this study aims to corroborate and clarify the formation and verification of emotional interactions between human beings and space using body movements. It follows the method of Coining "Movement Phrases" through the analysis of body movements in the experimental space, thereby developing them into a complete scenario to produce the story of emotional expression. This study has hereby generated the following outcomes: First, the "pocket-type" exhibition displays a higher frequency of body movements than the "general" exhibition. It has close connections with emotional vocabularies: "Curious," "interesting," "warm," and "fun." The "general" exhibition records a relatively high frequency of emotional vocabularies like "natural," "efficient," and "free." Second, it is possible to analyze the story of space using a scenario, just like drama, based upon attributes and serial relationships. The "exposition" section reveals a high degree of "curiosity" and a large number of body movements, while the "development" section indicates high degree of "surprise" plus slight body movements. The "transition" sections manifest high "interest" and many body movements, and the "climax" section shows a high frequency of "surprise" and many changes in body movements. The "conclusion" section finally invokes images together with body movements.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.114.2-115
• /
• 2003

Rice stripe virus causes severe damage to rice in Korea, Japan and China. RSV is a type member of the tenuivirus group and transmitted by the small brown planthopper, Laodeiphax striatellus, in a persistant manner. Until now, occurrence of RSV is limited in of southern part of Korea. But recently occurrence of RSV is increasing and spreading in central part of Korea including Chungcheong and Kyonggi province. So we analyzed recent occurrence trend of RSV which is increased and cloned and sequenced coat protein gene for isolating of RSV strain. Infected rice of each species(Ilpumbyeo, Sindongjinbyeo, Keumobyeo-2, Dongjinbyeo, Jongnambyeo, Samcheonbyeo, etc.)is collected, we extracted total RNA from infected leaves and detected RSV viral RNA by reverse transcription(RT)-PCR using specific primer of coat protein gene. The result of RT-PCR, we observed specific band. We already cloned cDNA from the band, is analyzing sequence variety and homology of each species.

• Transactions of Materials Processing
• /
• v.23 no.6
• /
• pp.363-368
• /
• 2014

Electromagnetic forming(EMF) is one of the high-speed forming methods, and has been used to deform metal sheets. The advantages of electromagnetic forming are reduced wrinkling due to non-contact characteristic and fine formability because of the high speed impact. In the current study, we suggest the application of electromagnetic forming to emboss pattern shapes using electromagnetic forces with only one forming coil and one punch. The high impact of the sheet at speeds of 100~300m/s produces significant coining pressure. In the current paper, electromagnetic forming was applied to Al 1100-O sheets; with thickness of 1.27mm and an area of $40mm{\times}40mm$. Using a single spiral coil, totally different types of patterns were created. Four different patterns were successfully produced on the aluminum sheet. The length and depth of the patterns were measured by three-dimensional scanning. Comparisons to the die shape showed good agreement. The test results confirm that emboss pattern forming by EMF using a single die can be used to replace the costly conventional method.

• Korean Institute of Interior Design Journal
• /
• v.18 no.1
• /
• pp.27-34
• /
• 2009

Architect Bernard Tschumi had explored a new architectural conception through his own notional devices such as space, event and movement during 1970s. But, among these notions, the concept of movement was ambiguous and difficult to adopt it for architectural design strategy. Because the movements in everyday's behaviour or in dancing art are significantly different from architectural thought. However he had succeeded in coining the creative notion of movement as almost real body's and of living flesh. He invented an acute methodology and bold interpretation for his early experimental works. So, this paper tried to understand and analyse his concept of movement focused on his early works. The results of this paper's discussion are as follows; First, Tschumi's movement concept Is dynamic one operated by desire and can violate space in physical level as well as metaphysical level. Next, the movement performs the role of generator which deforms space or even generate it. Third, his movement can be readable only when you go down and bring it in practice. Also it Is unblocked potentiality, undetermined sequential material and unfinished practice. Fourth, when Tschumi's movement could be thought as walking, this walking movement makes up a story through rhetorical speech acts that are presented by turns and detours.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.113-120
• /
• 2009

Currently the verbal abuse in text message over on-line game is so serious. However we do not have any effective policy or technical tools yet. Till now in order to cope with this problem, the online game service providers have accumulated a set of forbidden words and applied this list on the textual word used in on-line game, which is called 'Swear filter'. But young on-line game players easily avoid this filtering method by coining another words which is not kept in the list. Especially Korean is very easy to make new variations of a vulgar word. In this paper, we propose one smart filtering algorithm to identify newly coined profanities. Important features of our method include the canonical form transformation of coined profanities, semi-global alignment between in the level of consonant and vowel units. For experiment, we have collected more than 1000 newly coined vulgar words in on-line gaming sites and tested these word against our methods. where our system have successfully filtered more than 90% of those newly coined vulgar words.

• Journal for History of Mathematics
• /
• v.21 no.3
• /
• pp.97-112
• /
• 2008

In this study, the research results up to now on original word form and its meaning of Korean number words hana, dul, ..., yeol are looked out from math-historically. In fact, finding out original word form and its meaning of hana, dul, and set(ses) may not be possible in the respect of history of mathematics. There might have been a gap between set(ses) and net(nes), and between net(nes) and daseot(daseos). Original word form and its meaning of hana, dul, set(ses), and net(nes) must be found out in different aspect from those of daseot(daseos), yeoseot(yeoseos), ..., yeol. There might have been a gap between yeoseot(yeoseos) and ilgop(ilgob). Coining number word mechanism for ilgop(ilgob), yeodeol,(yeodeolb) and ahop(ahob) might have been same each other. There might have been a gap between ahop(ahob) and yeol. The research results up to now have not paid attention to this gaps sufficiently. But according to history of mathematics, there must have existed several gaps.