SNU 1.5MV 반데그라프 가속기의 표적상자 전단에서 사용될 자기 4극 렌즈를 제작하고 그 광학적 특성을 측정 및 분석하였다. 렌즈의 칫수는 자극 길이 180mm, 구경 반경 25mm, 자극편 반경 28.75mm이며 자극과 철심의 재료로는 탄소강 KS-SM40C를 사용하였다. 코일은 자극 당 480회 감아 공냉식을 채택하고 있다. 제작한 렌즈에 직류 전류 2.99$\pm$0.03A를 흘리며 Hall 탐침소자를 써서 r,$\theta$,z의 각 방향에 대해 여러 지점에서 자장 요소 $B_{\theta}$, $B_{\gamma}$을 측정하였다. 측정된 자료에 대한 면적 적분과 직교성 다항함수 fitting을 통하여 렌즈 중심에서 자장 구배 G=566.3$\pm$2.1 gauss/cm, 렌즈축 상에서 유효길이 L=208.3$\pm$1.44mm로 나타났다. 렌즈의 다극 요소는 최소자승법을 써서 20극까지 결정하였다. 결과로서 렌즈 중심의 18mm 반경 이내의 영역에서 6극 요소 대 4극 요소의 비는 1.4$\pm$0,9% 이하이고, 기타 다극 요소들은 모두 0.5% 미만임을 얻었다.
Objectives: We examine cases of chemical poisoning that occurred in the cleaning of metal parts and the regulations on halogenated solvents in other countries and propose regulations necessary to prevent chemical poisoning from halogenated solvents. Methods: We collected cases of chemical poisoning through the website of the Korea Occupational Safety and Health Agency. A review of the literature was conducted focusing on regulations related to halogenated solvents in the United States and the European Union, particularly for cleaning metal parts. Among the Material Safety Data Sheets submitted to the government, MSDS containing eleven substances were extracted to confirm the composition and product use. We investigated cleaning methods for metal parts used in South Korea. For the hazard classification, the European Chemicals Agency or Japan's NITE's website was used. Results: In the case of poisoning, the cleaning methods involving trichloromethane were dipping and dry, which was not found in the literature. It was confirmed that many halogenated solvents and dimethyl carbonate were used for metal cleaning in South Korea. In vapor degreasing using TCE in the USA, even if the facility is strictly managed, such as by installing cooling coils in open cleaning facilities, the risk of exposure to TCE is considered to be not only carcinogenic but also a concern for acute and chronic effects. In comparison, exposure through Korean work methods such as dipping and drying operations is inevitably much higher. Conclusions: The transition to water-based cleaning with low-hazard chemicals should be a priority in the cleaning process. In the case of metal parts that require precise cleaning, if the use of a halogenated solvent is inevitable, a closed degreasing facility should be used to minimize exposure. The current regulations in the Occupational Safety and Health Act, the Chemical Substances Control Act, and the Air Environment Conservation Act do not require cleaning facilities to minimize emissions. To protect the health of workers using halogenated solvents to clean metal parts, regulations that require a fundamental reduction in exposure will be necessary.
기관지 동맥류는 전 세계적으로 드문 질환으로 특히 한 개의 기관지 동맥에서 기인한 여러 개의 동맥류는 매우 드물다. 이는 병변의 크기에 상관없이 파열의 위험이 있고 대량 객혈과 심각한 통증을 유발할 수 있다. 저자들은 하나의 기관지 동맥에서 발생한 다발성 동맥류에 대해 성공적으로 색전한 증례를 보고하고자 한다. 64세 여성이 10년 전 건강검진에서 시행한 흉부 CT에서 다수의 기관지 동맥류와 우하폐의 기관지 병변이 발견되었다. 환자는 이에 대한 추가적 검사를 권유받았으나 거절 후 추적 소실되었다. 이후 호흡곤란을 주소로 내원 후 시행한 흉부 CT에서 기관지 동맥류의 크기가 증가한 소견을 보였고, 동맥류에 대해 분리코일, N-butyl-2-cyanoacrylate를 이용하여 성공적인 색전술을 시행하였다. 색전술이후 추적 흉부 CT에서 우하폐의 염증성 병변의 범위가 감소한 것이 확인하였다.
본 연구는 상자성이며 중성자를 흡수하는 힘이 큰 gadolinium(III) 전이금속과 polyaminocarboxylic ligand를 합성하여 제조한 MRI 조영제와 현재 임상에서 널리 사용되고 있는 Gd-DTPA의 영상을 비교하였다. 1.0T(Harmony, SIEMENS) MR 장비를 이용하여 Saline 100cc에 Diethylenetriaminetriacetic acid 유도체와 Gd-DTPA를 각각 0.05mmol/L, 0.1mmol/L, 0.15mmol/L, 0.2mmol/L, 0.3mmol/L, 0.5mmol/L, 1mmol/L, 2mmol/L, 3mmol/L, 4 mmol/L로 희석한 팬텀을 영상화하였다. Head Coil을 사용하였으며, SE Pulse sequence 와 영상변수는 TE를 14ms, 1NEX, matrix는 256×201로 고정하고, TR을 300ms, 400ms, 500ms, 600ms, 700ms, 800ms, 900ms, 1000ms, 1200ms, 1400ms, 1600ms로 변화하여 각 조영제의 농도와 TR의 변화에 따른 신호강도와 단순대조도비를 비교하였다. 측정된 자료는 통계패키지 프로그램인 SAS v8.1(GLM procedeur)을 사용하여 분석하였다. 조영제의 농도와 TR의 변화에 따른 영상의 신호강도를 비교한 결과 최대신호강도를 보인 $1{\sim}2mmol/L$에서 두 조영제간의 차이는 크지 않은 것으로 나타났다. 하지만 1mmol/L 이하의 낮은 농도에서는 Diethylenetriaminetriacetic acid 유도체의 신호강도가 현저히 높은 것을 알 수 있다. 단순대조도비를 비교한 결과에서도 신호강도와 같은 양상을 보였으며, 대체로 1mmol/L 이하의 낮은 농도에서는 Diethylenetriaminetriacetic acid 유도체가 Gd-DTPA에 비해 높은 대조도비를 보이고 그 이상의 농도에서는 Gd-DTPA의 대조도비가 높은 것으로 나타났다. 또한 TR에 따라 각각의 조영제 농도별 신호강도의 차이가 현저한 것으로 나타났다. 따라서 Gd-DTPA에 비해 Diethylenetriaminetriacetic acid 유도체의 효능이 뛰어나며, 조영제의 농도에 맞추어 적절한 TR을 사용하여 최적의 영상을 얻어야 할 것으로 사료된다.
Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
한국분말야금학회:학술대회논문집
/
한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
/
pp.9-10
/
2000
An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.
A survey of the internal parasites in 115 fishes of Ophicephalus argus was carried out in Kyungpook province during the period from January 1995 to November 1997. A species of trematode from the stomach and a species of nematode from the caeca of the fishes was discovered respectively. The trematode was identified as Azygia hwangtsinyi (Tsin, 1993) and the nematode as Pingus sinensis ($Hs\ddot{u}$, 1993). The fluke was pressed at thick of 0.1mm~0.2mm between slide glasses and fixed in 70% ethyl alcohol solution. The fluke was washed with tap water after fixation and stained with hematoxylin-carmin and mounted in balsam through routine methods. The nematode was fixed in 5% formalin solution and mounted with lactophnol or glycerine jelly. Morphology : Arygia hwantsinyi ; The fluke is elongate body with approximately parallel margins and rounded extremities in pressed preparations(Fig 1). The cuticle is unarmed. The oral sucker is ventro-subterminal in position. The ventral sucker is slightly smaller than oral sucker and positioned at 14.2% of body length from the oral sucker. The cirrus sac and genital pore is in mid-ventral line, slightly anterior to the ventral sucker. The oral sucker is succeeded by a well developed muscular pharynx. It is succeeded by a short inverted Y-shaped oesophagus. The inner wall of oesophagus is consisted of many fine folded membrane. The fine tubes of esophagus pass into the intestinal heads which are distended and presented a marked borderline between the fine tube and intestinal heads. The Intestinal heads start at level of pharynx and pass caudad in a zigzag course to end quite near caudal margin. The uterine coils occupy the intercecal area between the level of the cephalic margin of the ovary and about the level of the ventral sucker. The uterus is filled with many eggs. The testes are round or oval and placed one behind the other generally a little diagonally. The posterior testis is placed at level of 75.1% of body length. The ovary is oval, placed ahead the anterior testis. The shell gland not discernible outline is contacted with ovary ahead it. The vitelline glands are consisted of small oval vesicles. The vesicles occupy extracecal regions and between a little posterior of the ventral sucker and near caudal margin. Pingus sinensis : Female ; The cuticle is smooth and the cervical alae are well developed. The mouth opening is small, triangular, and without lips. The anterior end bears four sub-medial papillae. The oesophagus is divided into a muscular and glandular portion. The nerve ring is situated just at the junction of the muscular and glandular portions of the oesophagus. The vulva which has a prominent flap, is placed behind the middle of the body about one-third of the length of the worm from the posterior extremity. The vagina is strongly muscularised and after running anteriorly about $68{\mu}$, divides itself into two broad uterine tubes with an anterior and a posterior one. There are a few eggs in the uterine tubes. The tail is slender, straight and pointed. The ovary extends almost to the posterior extremity. Male : Male is smaller than female. The tail is pointed, curved and carrying well-developed caudal alae. A prominent muscular precloacal sucker is characteristic. The spicules are equal and short. There are four pairs of pedunculated pre-anal papillae, of which the most anterior pair are situated just at the level anterior to the muscular sucker. Two pairs of pedunculated papillae are present before the anus. There are five pairs of post-anal papillae of which the most anterior pair and the second counted from the posterior end are ventral and more marked than the ones which are situated laterally.
이 논문은 total flux leakage (TFL) 방법을 이용해 외부텐던을 비파괴검사 하는 솔레노이드 형태의 센서의 측정 신호를 후처리하는 방법을 소개한다. 기존에 개발된 TFL 솔레노이드 센서는 1차 코일과 2차 코일로 이루어져 1차 코일에 정현파 형태의 교류를 입력하면 2차 코일에 그 미분에 비례하는 신호가 측정된다. 이때 진폭은 텐던의 단면에 비례하므로 파단 및 부식 여부를 확인할 수 있다. 따라서 TFL센서의 측정신호에서 진폭정보를 추출 하는 것이 중요한데 기존에는 단순히 극댓값을 모아 진폭정보를 취득했다. 하지만 이 방법을 사용하면 측정빈도가 크게 낮아져 추가적인 신호처리 및 인공지능 적용에 많은 제약이 생긴다. 이 논문은 높은 측정빈도를 가진 진폭정보를 추출하기 위해 진폭복조를 응용해 진폭정보를 획득하는 방법을 제시한다. 진폭복조를 이용해 진폭정보를 취득하면 측정빈도를 원시신호와 동일한 수준으로 유지할 수 있다. 이 방법은 TFL센서의 1차 코일 입력 주파수 선택과 센서를 외부텐던에 적용하는 속도 등에 제약을 없애주어 개발 방향에 많은 자유도를 부여한다. 또한 높은 측정빈도를 유지하므로 추가적인 신호처리나 인공지능 등을 활용 하는데 유리함을 제공한다. 제안된 방법은 실내실험을 통해 검증 되었으며 기존 방법과 비교해 어떤 장점이 있는지 분석했다. 제시된 예제의 경우 진폭복조를 사용한 방법이 기존 방법에 비해 100배 높은 측정빈도를 제공 하는 것을 확인 할 수 있었다. 주어진 상황과 구체적인 장비 설정에 따라 차이가 있겠지만 대부분의 경우 진폭복조를 사용해 진폭정보를 추출하면 기존 방법 대비 만족할만한 결과를 얻을 수 있을 것이다.
1980년(年) 한국(韓國)에서 발견(發見)된 Microsporidia S 80은 포자(胞子)의 길이가 $2.9{\pm}0.28{\mu}$ 폭(幅)이 $1.7{\pm}0.29{\mu}$으로 난원형(卵圓形)인데 그 크기가 형태(形態)로 보아 누에에 기생(寄生)하는 Microsporidia로서 지금까지 한국(韓國)이나 일본(日本)에서 알려진 것 들과는 다른 것이다. 과산화수소(過酸化水素) 원액(原液)으로 처리(處理)하였을때에 추출(抽出)된 극사(極絲)의 길이는 평균(平均) $26{\mu}$이었고 극사(極絲)의 선단(先端)에서 둥근 모양의 sporoplasm이 돌출(突出)되어 있는 것이 관찰(觀察)되었다. 한편 포자(胞子)는 Giemsa, Safranin-O, Gram 등(等)의 염색(染色)에서 부분적(部分的)으로 염색(染色)되는 특징(特徵)이 나타났으며, 전자현미경(電子顯微鏡)으로 관찰(觀察)한 포자(胞子)의 미세구조(微細構造)는 제일 바깥 부분(部分)이 전자밀도(電子密度)가 높고 요철(凹凸)이 있는 얇은 exospore로 둘러싸여 있고 그 안쪽에는 투명(透明)하고 두꺼운 endospore가 있는데 endospor는 포자(胞子)의 정단부(頂端部)가 다른 부위(部位)보다 상당히 얇은데 이곳으로 극사(極絲)가 추출(抽出)되는 것으로 생각된다. endospore와 cytoplasm과의 경계부(境界部)에는 세포질(細胞質)을 싸고 있는 한층(層)의 한계막(限界膜)인 inner limitting layer가 있다. 세포질(細胞質)의 전단부(前端部)에는 polar cap이 있고 그 밑에는 lamellar 구조(構造)의 발달(發達)된 polaroplast가 있으며 polaroplast의 후부(後部)는 vesiculate part로 되어 있는 것으로 보인다. polar filament는 anchoring disc인 polar cap에서 곧게 뻗어 나아가다가 포자(胞子)의 내벽(內壁)을 따라 돌면서 용수철 처럼 말려 있는데 polar filament의 coiled part 중앙(中央)에 2중막(重膜)에 싸여진 전자밀도(電子密度)가 높은 후형질(厚形質)로된 2핵(核)이 인접(隣接)하여 있으며 포자(胞子)의 부단부(部端部)에는 posterior vacuole이 있을 것이다. 이러한 포자(胞子)의 크기와 형태(形態) 및 미세구조(微細構造)로 보아 Microsporidia인 것을 확인(確認)할 수 있으며 분류학(分類學) 상(上)의 위치(位置)는 Microsporea 강(綱), Microsporidia 일(日)에 소속(所屬)시킬 수 있고 아목(亞目) 및 속(屬)을 규명(糾明)하기 위(爲)해서는 그 생활사(生活史)가 밝혀져야 한다. Mcrosporidia S80을 2령(齡) 기잠(起蠶)에 경구접종(經口接種)한 경우(境遇)의 LD50은 $7.1{\times}10^7/ml$로서 $1.2{\times}10^7/ml$인 Nosema bombycis와 비교(比較)할때 병원성(病原性)이 낮은 것으로 나타났으나 그 발생지역(發生地域)이 경기도(京畿道)를 중심(中心)으로 인접지역(隣接地域)인 강원(江原), 충북(忠北) 충남(忠南) 및 전남(全南)에서도 발생(發生)되고 있는 점(點)과 4령기(齡期) 접종시(接種時) 전견중(全繭重)과 견층중(繭層重)에 나쁜 영향(影響)을 미칠뿐 아니라 화아비율(化蛾比率)이 낮고, 감염(感染)된 모아(母蛾)는 물론 감염(感染)된 웅아(雄蛾)와 교미(交尾)한 모아(母蛾)에서도 산란불능아(産卵不能蛾)가 발생(發生)하거나 산란수(産卵數)가 건전구(健全區)에 비(比)하여 떨어지는 동시(同時)에 부수정란(不受精卵) 비율(比率)도 높은 것으로 볼 때 사견양잠(絲繭養蠶)은 물론 종견양잠(種繭養蠶)에 있어서도 피해(被害)를 입고 있을 것으로 본다. 감염모아(感染母蛾) 21마리에서 얻은 차대잠(次代蠶)의 검사결과(檢査結果) 경란전달(徑卵傳達)은 되지 않는 것으로 나타났으나 혹시 경란전달(徑卵傳達)이 된다고 해도 그 빈도(頻度)는 매우 낮을 것이며 1/21 미만(未滿)일 것으로 생각된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.