• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.60-62
• /
• 1994

In this paper, the LVDT with compensating secondary coil and secondary current boost circuit is proposed. The LVDT was experiment with a test device, and analyzed with numerical method (FEM), It is shown that the LVDT has a good linearities for the measurement of the displacement and position, etc..

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.1090-1091
• /
• 2005

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1035-1037
• /
• 1993

Thermo motor that uses driving part as heating part is different from general fan heater. As it uses energy that drives rotor and generate heat at the same coil, it is simpler and cheaper than general fan heater. In this study, shaded-pole motor was used that is low cost and simple in spite of low efficiency.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.2010-2011
• /
• 2007

Rogowski Coil Current Transformer using PCB(Printed Circuit Board) is produced to analyze characteristics of digital C.T(Current Transformer). Conclusively, this paper expresses a difference and a good point of C.T using PCB.

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.7-11
• /
• 1989

A Faraday rotator is designed with the HOYA FR-5 rotator glass. We find that traveling light rotates 45$^{\circ}$in the glass when magnetic field intensity is about 3.0$\times$105AT/m. The current of 2.7KA flowing in the coil of the 0cm diameter, 29cm long and 41 windings generates this magnetic field. A pulse forming network is designed for this current of 84 sec duration. The network is analyzed numerically to find the relevant circuit parameters for the flattest current waveform.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.1027-1032
• /
• 1995

To develop operation scenarios of KT-2 tokamak, 3 operation modes(OH, high ${\beta}$ and high bootstrap) deduced from zero dimensional steady-state power balance are examined with TSC(Tokamak Simulation Code) time-dependent transport .ode. Plasma profiles are evaluated self consistently during simulations and plasma shapes are maintained by feedback control on PF coil currents. Simulations show operation modes which are typical of KT-2 expected discharges are compatible with the KT-2 PF system design specifications[1].

• Journal of Mechanical Science and Technology
• /
• v.16 no.8
• /
• pp.1089-1094
• /
• 2002

Mobile communication industry powered by electronics and information technology is building a transforming way for human communication. The latest electronics is so saturated to forget the difficulty in size reduction of electronic parts. However, mechanical parts, such as dynamic speakers and vibration motors, are intrinsically not easy to realize size reduction due to their construction. In this paper, a hexahedral type with simpler configuration is introduced to substitute for the conventional vibration motors. For uneven magnetic field analysis of the hexahedral type, FEM was used to determine magnetic flux density. After an analysis of magnetic and mechanical characteristics, it is shown that the coil configuration is the most important parameter to increase the output torque, and thus vibration. For optimization, genetic algorithm is used to find the optimal configuration of coil to maximize the output torque. Experimental results are also followed to confirm the validity of the proposed design.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.8
• /
• pp.788-794
• /
• 2009

Various types of latch designs for hard disk drives using load/unload mechanism have been introduced to protect undesired release motions of a voice coil motor(VCM) actuator from sudden disturbances. Recently, various inertia-type latches have been widely used because locking performance is better than that of other types of latch. However there has been a limit in the inertia type in order to guarantee perfect latch and unlatch operations because of changes in latch/unlatch conditions due to mechanical tolerance and temperature-dependent friction. In this paper, a reliable and robust magnetic latch mechanism is proposed through only simple modifications of coil and yoke shapes in order to overcome the mechanical limit of current inertia-type latches. This new magnetic latch does not have only a simple structure but it also ensures reliable operations and anti-shock performance. The operating mechanism of the proposed latch is theoretically analyzed and optimally designed using an electromagnetic simulation.

• Progress in Superconductivity and Cryogenics
• /
• v.5 no.1
• /
• pp.52-55
• /
• 2003

For the dielectric insulation design of any high temperature superconducting (HTS) apparatus in the electrical power systems, the breakdown properties of cryogenic coolants such as $LN_2$ are an important factor of the insulating engineering. Therefore, this paper presented an experimental investigation of breakdown phenomena in $LN_2$ under AC voltage. And we studied the breakdown properties of LN2 with decreasing temperature. Also, the Weibull plots of the breakdown voltage of subcooled $LN_2$ at 65 K for the needle-plane electrode with electrode distance d= 10 mm are studied. The dependence of breakdown voltage for needle-plane and pancake coil-pancake coil electrode on temperature is illustrated. The experimental data suggested that the breakdown voltage of L$N_2$ depend strongly on the temperature of $LN_2$. The breakdown characteristics of $LN_2$ under quasi-uniform and non-uniform electrical field for temperature ranging from 77 K to 65 K were clarified.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.512-514
• /
• 2008

In this paper, a new electromagnetic circuit is proposed for an optical pickup actuator with high sensitivity. Contrary to those of conventional actuators, the proposed circuit has two focusing coils which are diagonally placed at the front and rear of a moving part. The configuration which makes the effective length of the focusing coil longer and the moving part lighter, is helpful in increasing the sensitivity of the actuator. However, the asymmetry of the moving part by two focusing coils causes flexible node vibrations in quite low frequency range. This paper shows that the design modification of the moving part for the reconfiguration of mass moment of inertia can reduce the mode vibrations.