• 한국식품위생안전성학회지
• /
• 제21권4호
• /
• pp.231-237
• /
• 2006

현재 침출용 티백은 그 편리성으로 인하여 전 세계적으로 녹차, 홍차, 커피 등에 다양하게 이용되고 있어 안전성 측면에서 침출용 티백에서 유래될 수 있는 가소제와 유해중금속의 잔류실태 및 식품으로의 이행정도를 조사하였다. 먼저 GC/FID를 이용하여 DEHA, DEHP등 총 16종의 가소제를 동시 분석할 수 있는 분석조건을 확립하였다. 이때 각 가소제 성분에 대한 회수율은 $82.7%\sim104.6%$ 범위였으며, RSD $0.6%\sim2.7%$, 상관계수 $0.9991\sim0.9999$로서 우수한 재현성 및 직선성을 나타내었다. 동 시험법을 적용하여 국내 유통 중인 침출용 티백 재질 143품목에 대하여 재질중에 함유된 가소제를 분석한 결과, 16종 모두 불검출이었고 침출용 티백 재질을 $95^{\circ}C$ 물에서 30분간 침출시켜 식품으로 이행되는 양을 분석한 결과에서도 16종의 가소제가 모두 불검출이었다. 또한, 티백 재질중 유해중금속인 납, 카드aba, 비소 및 알루미늄의 함유량을 ICP/AES를 이용하여 분석한 결과, 티백 재질당 납은 $trace\sim23{\mu}g$, 알루미늄은 $0.6\sim1718{\mu}g$으로 검출되었고, 카드뮴 및 비소는 모두 trace로 검출되었다. 티백 재질을 $95^{\circ}C$ 물에서 30분간 침출한 액에서는 티백당 납 및 알루미늄은 각각 $trace\sim11.5{\mu}g$ 및 $trace\sim20.8{\mu}g$으로 검출되었고, 카드뮴 및 비소는 모두 불검출이었다. 따라서 차를 음용하는 시간동안 침출용 티백으로부터 가소제 및 중금속의 이행에 따른 문제점은 없는 것으로 사료된다.X>$114.03{\pm}19.04mg%$, 된장이 $734.32{\pm}147.70mg%$, 청국장이 $600{\pm}150mg%$ 이었다. 색도를 측정한 결과 L(명도), a(적색도) 및 b(황색도)값의 평균치는 고추장은 각각 $14.49{\pm}1.44,\;15.45{\pm}1.77$및 $8.34{\pm}1.02$로 나타나 적색도에 있어서 다소 낮게 나타났고, 된장은 각각 $26.69{\pm}4.33,\;7.25{\pm}1.03$ 및 $12.02{\pm}1.82$로서 명도와 황색도가 다소 낮게 나타났다. 청국장은 각각 $35.62{\pm}2.05,\;6.31{\pm}0.37$ 및 $13.50{\pm}0.78$로 나타나 명도와 황색도에 있어서 다소 낮게 나타났다.m25$에 9.4%를 나타내었다. 신체발달점수에서 남대생은 68.3%가 $75\sim85$이었고, 86 이상이 25.3%로 나타난 반면, 여대생은 표준범위가 63.6%의 분포를 나타내었다. 여대생의 나트륨 섭취는 연령과 0.082의 유의성을 나타내었고, 남대생의 복부 지방률은 연령과 0.011의 유의적 차이를 나타내었으며, 여대생의 체단백질랑은 나트륨섭취와 -0.276의 음의 상관관계를 나타내었다. 따라서 본 조사에 의하면 탄수화물:단백질:지방 비율이 $46\sim54:16\sim17:30$ 이상의 수준이었고, 섬유소는 권장량의 20%, 칼슘은 권장량의 $77\sim83%$, 나트륨은 권장량의 $2\sim3$배를 섭취하였는데, 이러한 섭취경향은 체성분에서 특히 남대생 94%가 체단백질량이 표준이상인 반면 남대생

• 핵의학기술
• /
• 제14권2호
• /
• pp.77-82
• /
• 2010

PET/CT 기기의 설치가 증가함에 따라 PET/CT 검사 시감쇄 보정을 위한 CT 검사 역시 증가하여 검사 과정에서 피폭 선량이 증가 되고 있어 의료 피폭의 저감 대책을 포함한 방사선 안전 관리의 체계적인 구축이 필요하다. 본 연구에서는 PET/CT 검사에서의 환자 선량 데이터베이스를 구축하여 환자 선량 저감을 위한 초석을 세우기 위해 CT 선량 측정 프로그램을 사용하여 CT를 사용한 투과 스캔 시 환자가 받는 CT의 예측 유효 선량을 비교 분석하였다. BIO40, BIO16, DSTe8 에서 $^{18}F$-FDG PET/CT 검사를 시행한 180명을 대상으로 하였다. 각 기기 별로 남, 여 30명씩 선량의 평균을 분석하였다. 자동 노출 제어 시스템으로 선량 조절 시 가장 큰 영향을 줄 수 있는 환자의 체중 별로 50 kg미만, 50-60 kg 미만, 60 kg 이상 세 집단으로 나누어 선량의 평균을 분석하였다. CT-Expo v1.7과 ImPACT v1.0을 사용하여 선량 측정을 한 값을 비교 분석하고 체중과 유효 선량의 상관관계를 분석하였다. BIO40에서 검사한 환자의 유효 선량을 CT-Expo v1.7과 ImPACT v1.0을 사용하여 예측하였을 때, 남자 환자 30명은 각각 $6.46{\pm}1.18$ mSv, $6.54{\pm}1.21$ mSv, 여자 환자 30명은 각각 $6.29{\pm}0.97$ mSv, $5.87{\pm}1.09$ mSv 이었다. BIO16 에서 검사한 환자의 유효 선량은 남자 환자 30명은 각각 $9.36{\pm}1.96$ mSv, $8.36{\pm}1.69$ mSv 여자 환자 30명은 각각 $10.02{\pm}2.42$ mSv, $8.43{\pm}1.89$ mSv 이었다. DSTe8에서 검사한 환자의 유효 선량은 남자 환자 30명은 각각 $9.36{\pm}1.96$ mSv, $9.74{\pm}2.55$ mSv, 여자 환자 30명은 각각 $9.05{\pm}2.27$ mSv, $9.19{\pm}2.29$ mSv 이었다. 각 기기에서 검사를 시행한 환자의 체중에 따른 환자의 선량을 비교하기 위해, BIO40에서 검사를 시행한 환자를 대상으로 하여 50 kg 미만, 50~60 kg 미만, 60 kg 이상으로 체중별로 세 개의 집단으로 나누어 환자 선량을 측정하였다. CT-expo v1.7로 측정을 하였을 때 각각 $6.05{\pm}1.77$ mSv, $6.18{\pm}1.05$ mSv, $6.80{\pm}1.06$ mSv이었고 ImPACT v1.0으로 측정했을 때 각각 $5.06{\pm}1.46$ mSv, $5.72{\pm}0.86$ mSv, $6.42{\pm}0.96$ mSv이었다. BIO16에서 검사를 시행한 환자를 대상으로 하여 50 kg 미만, 50-60 kg 미만, 60 kg 이상으로 체중 별로 나누어 환자 선량을 측정하였다. CT-Expo v1.7로 측정을 하였을 때 각각 $7.74{\pm}0.66$ mSv, $8.58{\pm}0.93$ mSv, $10.88{\pm}1.32$ mSv이었고 ImPACT v1.0으로 측정했을 때 각각 $6.60{\pm}0.54$ mSv, $7.45{\pm}0.69$ mSv, $9.43{\pm}1.11$ mSv이었다. DSTe8에서 검사를 시행한 환자를 대상으로 하여 50 kg 미만, 50-60 kg 미만, 60kg 이상으로 체중 별로 나누어 환자 선량을 예측하였다. CT-Expo v1.7로 측정했을 때 각각 $5.03{\pm}0.95$ mSv, $8.25{\pm}1.66$ mSv, $10.33{\pm}1.68$ mSv 이었고 ImPACT v1.0으로 측정했을 때 각각 $5.20{\pm}1.01$ mSv, $8.51{\pm}1.53$ mSv, $10.9{\pm}1.87$ mSv이었다. 체중과 유효 선량의 상관관계를 분석하였을 때 CT-Expo v1.7과 ImPACT v1.0에서 Pearson 정률 상관계수가 각각 0.743, 0.692으로 매우 강한 양의 상관관계가 있었다. 피폭 선량의 예측이 필요할 경우 이와 같은 상용화된 선량 평가 프로그램을 사용하면 Phantom 연구를 시행하지 않더라도 유효 선량의 예측 및 평가가 가능하고, CT 선량 관리를 위한 기초 자료를 수집하는데 활용 될 수 있을 것으로 생각된다.

• 한국작물학회지
• /
• 제10권
• /
• pp.1-43
• /
• 1971

실험 I. : 본 실험은 단수수에 대하여 재배시기를 이동함에 따르는 실용 제형질의 변화를 구명하기 위하여 1968~1969년까지 2개년에 거쳐 작물시험장 특용작물 연구실(수원)에서 시행되었으며 품종은 조만생, 초형, Syrup형, Sugar형 등 생태적 특성을 달리한 17개품종이 공시되었으며 묘종기 양년 모두 4월 5일부터 8월 25일까지 20일 간격으로 8회에 걸쳐 파종하여 조사한 바 그 결과를 요약하면 다음과 같다. 1. 발아기(발아일수)는 파종기를 앞당겨 저온하에 파종하면 발아에 소요되는 일수가 많고 파종기가 늦어서 기온이 상승됨에 따라 발아 일수가 직선적으로 단축되다가 8월 25일 이후의 파종부터는 다시 지연되는 경향이었다. 발아기간의 일평균온도와 발아일수간에는 높은 부상관관계가 있으나 이와는 반대로 발아일수와 적산온도간에는 고도의 정상관이 인정되었다. 2. 파종기의 지연에 따라 출수일수는 거의 직선적으로 단축된다. 공시된 품종간에 평균출수일수차는 30.2일이란 큰 차이가 있었다. 이들을 10일간격으로 조, 중, 만생군으로 구별하면 조생군은 평균출수일수가 78.5$\pm$4.5일범위에 속하고 중생군은 88.5$\pm$4.5일, 만생군은 98.5$\pm$4.5일로 되었다. 출수단축한계 종종기는 조생군이 제VI-VII파종기인 7월 15일$\pm$8월 5일까지이고 중생군은 제VI파종기인 7월 15일까지, 만생군은 제IV파종기인 6월 5일까지이었다. 3. 파종기(x)와 출수까지의 일수(y)와의 회귀직선식 y=a+bx의 손수(출수까지의 일수의 단축율)와 평균출수까지의 일수와는 고도의 정상관관계가 있었다. 4. 파종에서 출수기까지의 생육경과에 있어서 일평균기온이 높을수록 출수일수가 단축되어 조생종은 24.2$^{\circ}C$에서, 중생종은 23.8$^{\circ}C$에서, 만생종은 22.9$^{\circ}C$에서 최대단축율을 보이었고 따라서 출수전 30일간의 평균기온이 약 22$^{\circ}C$부터 $25^{\circ}C$에 이르기까지 가속적으로 출수소요일수가 단축되다가 그뒤 약 21$^{\circ}C$이하가 됨에 따라 다시 지연되는 경향이었다. 5. 초장의 절대치는 품종간에 차이는 있으나 비교적 조파구간에는 초장에 큰 변이가 없었고 파종기가 늦어짐에 따라 짧아졌다. 초장의 신장속도는 파종기가 늦어짐에 따라 현저하게 빨라지고 특히 조생종이 만생종보다 더욱 가속적인 경향이었다. 따라서 최고초장과 최저초장과의 절대치의 차이는 조생종일수록 적고 만생종일수록 큰 격차를 보이었다. 6. 간직경에 있어서도 만생종은 일반적으로 조기파종할수록 굵고, 조생종과 중생종은 4월 25일 파종기가 가장 굵은 편이며 이보다 파종기가 지연 가늘어지는 경향이었다. 7. 간중은 품종의 조만생에 따라 약간의 차이는 있으나 대체로 적기(4월 25일~5월 15일)보다 조기 혹은 만기 파종하면 작아지나 파종기 이동에 따른 간중의 변화는 품종의 조만성에 따라 양상을 달리하여 조생종은 4월 25일 내외, 중생종은 4월 25일~5월 15일 내외, 만생종은 4월 5일~5월 15일 내외의 파종기에서 최고수량에 달하고 이후 직선적으로 감소하였다. 8. Brix 도는 품종에 따라 절대치가 다르며 또한 파종기가 5월 15일 이후로 늦어짐에 따라 직선적으로 감소되어 파종기(x)와 Brix 도(y) 간에 고도의 부상관관계를 볼 수 있었다. 9. 출수후 40~45일경의 절간부위별 Brix 도는 상부 제 1~제3절간 부위가 최고에 달하고, 제4절간부터 서서히 낮아지다가 지상 제2절부위에 가서 다시 약간 높아지는 경향이었다. 그러나 출수전까지는 이와 반대의 경향이었다. 10. 간중당분에 대한 파종기별 축적상황은 파종기가 지연됨에 따라 거의 직선적으로 낮아지며 품종에 따라 차이는 있으나 6월하순 이후의 파종기는 당원료작물로서 거의 무가치한 낮은 함량을 나타내었다. 11. Brix도 및 간중당분은 출수기부터 축적이 시작되어 출수후 약 40~45일에 최고에 달하고 순당율도 같은 경향으로 생육의 진전과 더불어 높아져서 순당율과 Brix 도간, 순당율과 간중당분간에 각각 높은 정의 상관관계가 존재한다. 12. 가제당량과 파종기간의 관계를 보면 중생종과 만생종은 4월 25일, 중생종은 5월 15일 파종기가 최고에 달하고 이보다 파종이 지연됨에 따라 급격히 감소되는 경향으로 파종기(x)와 가제당량(y)사이에 1% 이상의 높은 부의 상관을 보았다. 13. 파종기 및 제형질간의 상호관계를 보면 파종기가 지연됨에 따라 발아일수, 발아기간의 적산온도, 출수일수, 출수일수까지의 적산온도, 초장, 간직경, 간중, Brix 도, 간중당분, 순당율, 가제당량 등은 모두 고도의 부상관 및 회귀관계이었고 출수일수(x)와 Brix도, 당도, 순당율, 가제당량, 초장, 간장(y)등 간, Brix 도(x)와 순당율, 가제당량, 간중(x)과 가제당량(y)간, 또한 출수시의 일장(x)과 Brix 도, 출수일수, 당도, 순당율, 가제당량(y) 등 간에는 고도의 정상관을 인정할 수 있었다. 실험 II: 실험 I에 공시된 품종중에서 생태 및 유전적으로 다른 11품종만을 이면교배법에 의하여 교잡된 F$_1$ 및 교배친의 출수기, 간장, 간중, Brix 도 및 Syrup yield 등에 대하여 우성정도, 교배조합능력 및 유전분석을 한 결과를 요약하면 다음과 같다. 1. 출수기는 조, 만숙방향으로 완전 혹은 초월우성인 특정조합이 있기는 하나 대체적으로 중간성 및 부분우성이었고 GCA 및 SCA가 높은 특정조합친을 인정할 수 있었다. 따라서 출수에 관여하는 유전인자의 분배비는 50:50으로 추정되었으며 유전력도 높아서 초기세대부터 선발이 가능할 것으로 본다. 2. 간장은 잡종강세도가 높았으며 장간의 방향으로 초월성인 특정조합도 있으나 완전 혹은 부분우성으로 추정된다. GCA 및 SCA는 일반적으로 높은 편이었으며 관여된 우성 및 열성유전자는 거의 50:50으로 분배되며 유전력은 낮았다. 3. 간중은 대부분 정의 방향(다수)으로 완전우성에 가까운 부분우성으로 작용하나 특정조합에 따라 초월우성인 것과 부분우성인 것이 있었다. GCA와 SCA는 비교적 높은 교배친을 인정할 수 있으며 유전자의 작용방향은 열성유전자가 많이 관여되고 복잡한 분리가 일어날 것으로 추정되며 유전력은 비교적 낮았다. 4. Brix 도에 대한 우성정도 및 방향은 교배조합에 따라 고 Brix 및 저 Brix로 나타났으나 일반적으로 초우성 내지 완전우성으로 나타났고 GCA 및 SCA는 Brix 도가 높은 품종일수록 높은 경향이므로 고당성 육종에는 역시 높은 당분함량을 가진 교배친이 유리할 것으로 추정된다. 5. Syrup 종에 대한 우성정도는 많은 방향으로 초월 혹은 완전우성으로 추정되며 잡종강세도는 대단히 높았다. GCA와 SCA의 관계는 일정하지 않으며 GCA가 높은 품종은 SCA가 낮은 경향이었다. 교배친의 우성대립인자 대 열성대립인자의 빈도는 거의 동수로 나타날 것으로 추정된다.

• 한국작물학회지
• /
• 제8권1호
• /
• pp.129-177
• /
• 1970

수도작에 있어서 수량성의 향상과 경영의 합리화률 기하기 위한 집단재배의 기술체계를 확립하고자 지역과 지대별로 임의선정된 18개소에서 집단재배와 개별재배를 한 수도에 대하여 경종 및 생육ㆍ수량구성요소의 변이를 조사연구하였으며 460개소의 집단재배와 개별재배에 대하여 경종ㆍ경영 및 조직운영등을 비교조사하고 집단재배와 개별재배의 경제성을 분석하여 그 결과를 요약하면 아래와 같다. 1. 집단재배와 개별재배의 경종 및 생육ㆍ수량형질에 관하여 연구한 결과는 다음과 같다. (1) 육묘에 있어서 집단재배가 비료의 3요소 특히 인산과 가리의 사용량이 많았고 약제살포의 횟수도 많았다. (2) 본답에 있어서의 경종기술은 집단재배가 개별재배보다 ${\circled1}$ 이앙기가 빨랐고 ${\circled2}$ 재식밀도에 있어서 1주당 재식묘수는 적으나 단위면적당의 포기수는 많으며 \circled3 시비량은 질소, 인산, 가리 및 퇴비의 시용량이 현저히 많았고 ${\circled4}$ 분시횟수도 많았으며 ${\circled5}$ 살충제 및 살균제의 살포횟수도 역시 집단재배에서 많았다. (3) 도북의 정도는 집단재배가 약간 더 하였고 병해충의 발생정도는 잎도열병, 목도열병 그리구 멸구, 이화명충 1화기 및 2화기의 발생이 집단재배가 적었다. (4) 집단재배를 한 수도의 간장 및 수장은 길고 고중도 무거웠다. 그리고 조고비율은 집단재배에 있어서 80.9%, 개별재배가 69.9%로서 높은 유의차가 있었다. (5) 수량구성요소인 수수와 1수평균영화수가 집단재배에서 현저히 많았고 현미 1000립중도 무거웠으며 등숙율은 개별농가의 벼와 차이가 없었고 그 변이계수는 집단재배가 개별재배에 비하여 모두 작은 값을 보였다. (6) 현미수량은 평균 10a당 집단재배 459.0kg, 개별재배 374.8kg으로서 84.2kg이나 전자가 많았으며 그들간의 변이계수는 집단재배에서 작게 나타났다. (7) 기간재배기술과 수량구성요소의 상관관계에 있어서 고도의 유의상관을 보인 것은 파종기와 1수영화수, 못자리 약제살포횟수와 1수영화수, 이앙기와 1수영화수, 본답의 인산시용량과 수량, 본답의 가리시용량과 등숙율, 분시횟수와 수량등에서 정(+)상관을 보였고 파종기와 등숙율간에는 부(-)상관을 보였다. 2. 집단재배와 개별재배의 경종\ulcorner경영 및 조직운영에 대하여 종합적으로 조사비교한 결과는 다음과 같다. (1) 집단재배의 품종수는 13개이고 개별재배에서는 47품종으로서 개별재배가 품종의 단순화를 기하지 못하고 있다. (2) 육묘기술에 있어서 비료3요소 특히 인산과 가리의 시용량이 많았고 약제살포횟수가 많다는 것은 1ㆍ의 실험결과와 같으며 이밖에 집단재배의 경우에는 종자소특이 100% 실시되었으며 파종량도 3.3$m^2$당 표준파종량인 3.6～5.4이 파종이 많이 실시되었으나 개별재배에서는 박파와 밀파가 많아 파종량의 변이가 컸었다. (3) 이앙기, 재식밀도, 병충해방제, 약제살포횟수, 시비량 및 분시횟수등은 1.의 결과와 같으며 추경 및 객토와 동력경운기의 사용은 집단재배에서 많았으며 이앙방식은 종전의 정방형식에서 극단적인장방형식으로 많이 바뀌었으며 물관리에 있어서는 중각낙수와 간단관수가 비교적 많이 실시되었다. (4) 현미수량은 평균 10a당 집단재배가 466kg이고 개별재배는 380kg으로서 전자가 86kg 많았다. (5) 병충해방제작업이 집단재배에서 집단방제로 많이 실시되었고 종자소독도 80% 이상의 공동으로 이루어 졌으며 수확, 수확물의 운반, 탈곡, 논갈이 작업등도 개별재배에서 보다 많이 공동으로 이루어졌다. (6) 집단재배에서 객토 및 퇴비의 사용이 현저히 많았으며 그 작업도 공동으로 이루어진 비율이 높고 또한 노동력의 투입도 많았다. (7) 육묘 및 본답의 물관리작업은 집단재배가 개별재배보다 노동력의 투입이 적었다. (8) 비료, 농약 및 노동력등의 비용가액은 집단재배가 개별재배보다 많았으며 약 2배에 가까웠다. (9) 경영규모는 3ha로부터 7ha 이상의 범위에 있으며 5ha내외의 것이 많았고 1개소의 집단재배는 10～20개 정도의 필지로 되어있는 것이 대부분이었다. (10) 경영자 및 경작자의 학력은 집단재배의 회장, 재배반장, 방제반장 및 수리반장 모두 국민학교졸업 이상이 93.7%이며 개별재배는 83%를 보였고 그들의 연령은 40～45세가 가장 많으며 이러한 경향은 양자가 비슷하였다. (11) 집단재배의 운영에 관한 주요설문에 대한 경작자들의 반응은 집단재배를 함으로서 확실히 수량은 증가하였는데 이것은 시비법개선과 병충해방제의 효과가 가장 컸다고 생각하는 사람이 많았고 집단재배를 함으로서 영농자재의 입수와 모든 작업이 적기에 이루어 졌다고 하는 것이 많았다. 또한 경작노력은 적게 들었다는 것이 66.8%이며 이앙노력은 집단재배가 오히려 더 들었다는 것 그리고 관의 간섭이 많았다는 것 등이 특이한 것이며 집단재배의 계속을 원하는 농가가 74.5%이고 원치 않은 농가가 25.5%였었다. 3. 집단재배와 개별재배의 경제성을 분석한 결과는 다음과 같다. (1) 경영비의 비용가액중 퇴비, 금비, 농약대 및 고용노임은 집단재배에 있어서 개별재배보다 각각 335원, 199원, 388원 및 303원이 더 투입되어 큰 차이를 보였으나 기타생산비목들은 집단재배와 개별재배간에 큰 차이가 없었다. (2) 총수익에서 경영비를 뺀 소득은 집단재배에서 24,302원이였고 개별재배에서는 20,168원으로 집단재배에서 10a당 4,134원의 소득증대를 나타내었다. 본 연구에서 수도집단재배는 새로운 기술의 적용도를 높이고 경영의 합리화를 기하여 안전다수확으로 개개 농가의 소득증대에 기여하였을 뿐만아니라 농민에게 새 기술의 적용이 유익했다는 실증을 보여 줌으로서 농민 스스로의 생산과정에 파급적이며 영속적인 변화를 촉진시킬것이라는 또 하나의 결론을 얻었다.

• 한국작물학회지
• /
• 제3권
• /
• pp.49-82
• /
• 1965

우리 나라에 있어서 수도작의 안전다수를 위한 재배법, 특히 시료의 합리화를 기하기 위한 기초적 자료를 얻기 위하여 수도 독자의 영양생리적 반응, 형태형성 내지 수량구성에 대한 특징을 살펴보았으며, 우리 나라의 수도 재배환경조건(온도ㆍ일조ㆍ강수 및 토양조건)을 대국적 견지에서 인접국인 일본과 지역별로 비교 검토하였고, 그 특징으로 본 시료에 관한 개선조건을 위해 비료의 3요소와 규산 및 그 밖에 수종의 미량요소에 대하여 검토하였다. 1. 우리 나라의 최근 14개년간의 10a당 현미평균수량은 204kg인데 이에 비하여 일본은 77%, 대만은 13% 높으며, 년간평균증가량은 우리나라가 4.2kg이고, 이에 비해 일본은 81%, 대만은 62% 더 증가되고 있다. 그리고 수량의 년간변이계수는 우리 나라가 7.7%이며 일본은 6.7%, 대만이 2.5%로서 우리 나라는 년간변이가 매우 커서 생산의 안전도가 가장 낮다. 2. 풍흉고조시험성적으로 본 우리 나라 수도와 일본의 수도를 형태형성면에서 비교하여 본즉 다음과 같았다. (1) 3.3$m^2$ 당 수수는 우리 나라의 891개에 비하여 일본은 13%나 더 많고, (2) 최고분얼기의 경수는 3.3$m^2$당 우리 나라는 1150개인데 비하여 일본은 19% 더 많았으며, (3) 유효경비율은 우리 나라가 77.5%, 일본이 74.7%로서 우리 나라가 다소 높았다. 그러나 총경수가 적은데 q하여는 유효경율이 너무 낮다. (4) 신고비는 우리 나라가 85.4%이고, 일본은 96.3%로서 우리 나라의 수도가 13% 낮았다. 3. 도작기간중의 평균기온은 수원ㆍ광주ㆍ대구는 거의 동일하며, 일본의 중국지방(부산)의 그것과 비슷하였다. 즉 우리 나라 도작기간중의 기온은 일본의 서남난지에 유사한 것이었다. 4. 우리 나라의 수도이앙기는 이앙한계최저온도 13$^{\circ}C$로 보면 현행(6월 10일 경)보다 30~40일 앞당길 수 있다. 5. 우리 나라의 현행 수도작기로서는 영양생장기의 기온이 이 시기의 주대사작용인 단백대사의 적온인 20~23$^{\circ}C$ 보다 높았다. 그러나 생식생장기의 기온은 이 시기의 주대사인 당대사의 적온인 $25^{\circ}C$이상보다 높지 않다. 그러므로 온도면에서 보면 우리 나라 수도의 작기는 앞으로 당기는 것이 좋다고 고찰된다. 6. 우리 나라의 현행 수도작기로 본 기온 및 일조조건은 수도의 분얼전기에 대해서는 호조건하에 놓여 있으나, 분얼후기인 7월 중ㆍ하순 경의 일조부족과 고온다습조건은 병해, 특히 도열병의 유발원인이 되고 있다. 7. 우리 나라의 현행수도작기로 본 전국각지의 수도의 출수기는 모두 일조시간이 적은 부적당한 시기에 처해 있다. 8. 출수후 40일간의 평균기온에 의한 적산온도 88$0^{\circ}C$의 출현기일은 수원에서 8월 23일이었고, 년간편차를 고려한 안전출수기일은 8월 19일로서 적산온도면에서는 관행 출수기일은 약간 늦다고 보았다. 9. 등열기의 평균기온에 의한 적산온도는 현행 수도작기로서는 최종한계시기에 놓여 있으며, 평균기온의 년간편차와 우리 나라의 최저기온이 낮은 점을 고려할 때, 현행출수기는 다소 늦은 것으로 보았다. 10. 생육단계별의 수도체내의 질소함량은 영양생장기의 질소함량이 과다하였으며, 출수 이후에 영양조락을 여하히 방지하느냐가 문제된다고 보았다. 11. 수리불안전답 및 천수답이 차지하는 전답면적의 비율은 차차 감소되고 있는데, 이와 전체 10a당 수량의 증가율과의 상관계수를 산출하였는데, 수리불안전답과의 상관계수 (4)는 +0.525였으며, 천수답과는 r=+0.832, 그리고 수리불안전답과 천수답을 합계한 것과의 상관계수 (r)는 +0.841로서 후2자와는 고도의 정(+) 상관을 보여 천수답이 차지하는 면적비율이 작을수록 단위수량을 증가하였다. 12. 비료삼요소시험(주산력시험)성적을 보면 무비료구의 10a당 현미수량은 우리 나라가 231kg인데, 일본의 그것은 360kg으로서 우리 나라보다 약 56%나 높았다. 즉 우리 나라의 지력은 일본에 비하여 매우 낮았다. 또 무질소구의 10a당 현미수량은 우리 나라가 236 kg인데 일본의 그것은 383 kg 으로서 우리 나라보다 62%나 높았다. 즉 우리 나라의 지력을 좌우하는 것은역시 질소라고 할 수 있다. 13. 우리 나라와 일본의 답토양의 화학적 성질을 비교해본즉 다음과 같았다. (1) 우리 나라 답토양은 유기물ㆍ전질소 및 치환성석회와 마그네슘의 함량이 일본의 그것보다 낮아 반정도에 불과하였고, (2) N/2 염산 가용규산함량은 평균치로 보아 우리나라 답토양이 적었고, 규산의 시용이 필요하다고 보았으며, (3) 염기치환용량이 일본의 반 정도이었다. 14. 우리 나라에 있어서 고위수량답과 저위수량답 토양의 성질을 비교하여 본즉 염기치환용량ㆍ치환성석회와 마그네슘ㆍ가리ㆍ인산ㆍ망간ㆍ규산 및 철 등의 성분이 저위수량답 토양에서 적었다. 15. 작통의 깊이는 항상 고위수량답에서 깊으며, 우리 나라 답토양의 작토는 일본의 그것에 비하여 얕다. 16. 전기한 바의 제조건을 종합 검토하고 비료삼요소이외에 규산과 미량요소로서 망간 및 철에 대하여 수도생리 및 형태형성 내지 수량에 미치는 영향을 고려하여 보다 합리적으로 사료되는 비료조건을 제시하였다.

• 대한간호학회지
• /
• 제22권1호
• /
• pp.81-115
• /
• 1992

The problem addressed by this study was to determine the effect of nurse - patient agreement on the means to achieve nursing goals in the early postpartum period of primiparous mothers. It was hypothesized that the experimental treatment would result in hegher self-confidence and satisfaction in maternal role performance. This purpose was to contribute to the planning of nursing care to enhance self- confidence and satisfaction in maternal role performance and to the development of relevant nursing theory. Especially, the early postpartum period is crucial toward in recovery from childbirth and attainment of the maternal role. Maternal role attaintment is a complex social and cognitive process of stimulus -response accomplished by learning. Most women attain the maternal role sucessfully. But, some primiparous mothers experience difficultites in attainment of the maternal role due to lack of experience and knowledge. Self-confidence and satisfaction in maternal role performance are important factors in attainment and adjustment to the maternal role (Mercer, 1981a, 1981b ; Lederman, Weigarten, and Lederman, 1981 :Bobak and Jensen, 1985). Nursing is defined as behaviors of nurses add patients that attain nursing goals through action, reaction, interaction, and transaction. For attainment of nursing goals, active participating transactions must occur by agreement on the means to achieve those goals through nurse -patient mutual goal setting and establishment of their active relationships(King, 1981, Ha, 1977). Based on King's theory of goal attainment (1981), this stuy was planned as a non-equivalent control group, non -synchronized quasi -experimental design using agreement on the means to achieve nursing goals in early postpartum as the experimental treatment. The data were collected from July 20 to Sep. 1, 1991 by questionnaires with 60 primiparous mothers planing to breast feed after normal deliveries at W hospital in Pusan, Korea. The subjects were divided into a control group(conventional group) -those admitted from July 20 to Aug. 12, and an experimental group(agreement group) - those admitted from Aug. 13 to Sep. 1. The instument for agreement on the means to nursing goals in the early postpartum period included five steps - identification of disturbances of problems through action, reaction, and interaction with primiparous mothers : mutual early postpartal nursing goal setting : exploration of the means to achieve goals ; agreement on the means (self- care, ealry maternal -infant contact, performance of mothering behavior, and communicating about the infant's behavior and health condition) : implementation of the means. This instrument was developed on the basis of King's elements that lead to transactions in nurse-patient interactions. Lederman et al's (1981) scale for Confidence in ability to cope with tasks of motherhood and Lederman et al's(1981) scale for Mother's satisfaction with motherhood and infant care were used to measure self-confidence and satisfaction in maternal role performance ·with the subjects immediately after admission and on the day of discharge. Self-care performance in the experimental group was measured by self -evaluation tool developed by the investigator from the literature concerned. The tools to measure Pelf-confidence and satisfaction in maternal role performance, and the tool to measure self-evaluation of self-care performance were tested for internal reliability. Cronbach's Alphas were 0.94, 0.94, and 0.63. The data were analysed by using in S.P.S.S. computerized program and included percentage, x²-test, t-test, ANOVA, and Pearson Correlation Coefficient. The conclusions obtained from this study are summerized as follows : 1. The degree of self-confidence in maternal role performance of the total subjects group measured before the experimental treatment was above average with a mean score of 2.77(range 2.14-3.64). Out of 14 items, those with relatively high mean scores were ‘I would like to be a better mother than I am’(3.95), and ‘I have my doubts about whether I am a good mother’(2.87). Those with low mean scores were ‘I know that my baby wants most of the times’(2.28), ‘When the baby cries, I can tell what she /he wants’(2.37), and ‘I have confidence in my ability to care for the baby’(2;50). That is, the self - confidence of Primiparous mothers was considerably high in mothering, but rather low in activities concerning the infant care and understanding of the infant behavior. The degree of satisfaction in maternal role performance of the total subjects group measured before the experimental treatment was high with a mean score of 3.18(range 1.92-3.92). Out of 13 items, those with relatively high mean scores were ‘I am glad 1 had this baby now’(3.75), ‘I play with the baby between feedings when s/he is awake and quiet’(3.67), and ‘I enjoy being a mother’(3.27). Those with low mean scores were ‘I am upset about having too many responsibilities as a mother’(2.78), ‘It bothers me to get up for the baby at night’(2.82), and ‘I get annoyed if the baby frequently interrupts my activities’.(2.82), That is, the satisfaction of primiparous mothers was considerably high in mothering and infant care, but rather low in restraints in time or on the mother's self accomplishment and development. 2. Agreement on the means to achieve nursing goals in the early postpartum period included process of mutual goal setting, exploration of the means to achieve goals, and ahreement in concert means to achieve goals based on the mothers' condition, concerns, self-perception of the nurse - patient interactions. In the process of agreement, there was agreement that the means to achieve goals should be through trust and establishment of active relationships with the nurse through identification of problems according to planned nursing goals and active interaction, such as explanations, teaching, changing of opinions, acceptance or rejection of explanations, and proposing of questions. Therefore agreement on the means to achieve nursing goals in the early postpartum period appears to be an effective nursing intervention for primiparous mothers. 3. The degree of self- confidence in maternal role performance of the exprimental group was higher than that of the control group(t＝3.95, p＜0.01). Out of 14 items, those with higher score in the experimental group were ‘I would like to be a better mother than I am’(t＝1.93, p＜0.05), ‘I know that my baby wants most of the times’(t＝2.75, p＜0.01), ‘When the baby cries, 1 can tell what she/he wants’(t＝2.10, p＜0.05), ‘I have confidence in my ability to care for the baby’(t＝3.72, p＜0.01), ‘I trust my own judement in deciding how to care for the baby’(t＝1.96, p＜0.05), ‘I feel that I know my baby and what to do for him /her’(t＝2.44, p＜0.01), ‘I am concerned about being able to meet the baby's needs’(t＝2.87, p＜0.01), ‘I know what my baby likes and dislikes’(t＝3.26, p＜0.01), ‘I don't know to care for the baby as well as I should’(t＝2.07, p＜0.05), and ‘I am unsure about whether I give enough attention to the baby’(t＝3.04, p＜0.01), That is, the degree of self-confidence in mothering, activities concerning infant care, and understanding of infant behavior of the experimental group was higher than that of the control group. Therefore, the first hypothesis, that the degree of self-confidence in maternal role performance of the experimental group would be higher than that of the control group, was supported(t＝3.95, p＜0.01). 4. The degree of satisfaction in the maternal role performance of the exprimental group was higer than that or the control group(t＝2.31, p＜0.05). Out of 13 items, those with higher score in the experimental group were ‘I am glad I had this baby now’(t＝2.29, p＜0.05), ‘I enjoy taking care of the baby’(t＝2.4g, p＜0.01), ‘It is boring for me to care for the baby and do the same thing over and over’(t＝2.87, P＜0.01), ‘I am unhappy with the amount of time I have for activities other than childcare’(t＝2.51, p＜0.01), and ‘When bathing and diapering the baby, I would like to be doing something else’(t＝2.43, p＜0.01). That is, the degree of satisfaction in mothering, infant care, and restraints in time of on the mother's self accomplishment and development in the experimental group was higher than that of the control group. Therefore, the second hypothesis, that the degree of satisfaction in maternal role performance of the experimental group would be higher than that of the control group, was supported(t＝2.31, p＜0.05). 5. The third hypothesis, that the higher the degree of satisfaction in materenal role performance, the higher the degree of self-confidence in materenal role performance in the experimental group, was supported (r＝0.57, p＜0.01)

• Applied Biological Chemistry
• /
• 제17권3호
• /
• pp.193-218
• /
• 1974

본(本) 연구(硏究)는 산도(酸度)가 극(甚)히 높고 수도(水稻)의 생육(生育)이 저조(低調)하며 수량(收量)이 낮은 특이산성답(特異酸性畓) 토양(土壞)에 대(對)한 특성조사(特性調査)와 그 개량(改良)의 목적(目的)으로 석회(石灰)를 시용(施用)하였을 때 토양(土壞)의 화학적(化學的) 성질(性質)과 수도묘(水稻苗)의 생육(生育)에 미치는 영향(影響)을 검사(檢討) 연구(硏究)하고져 하였다. 즉(則) 특이산성답토양(特異酸性畓土壞)에서 석회(石灰)의 시용(施用)이 그 토양(土壤)의 산도(酸度), 산화환원전위차(酸化還元電位差), 2가철(價鐵), 알루미늄 및 황산함량(黃酸含量)의 변화(變化)와 토양인(土壞燐)의 화학적(化學的) 형태(形態)에 미치는 영향(影響)을 담수(湛水) 및 건조(乾燥)와 같은 환경(環境)의 변화하(變化下)에서 추구(追究)하였으며 한편 수도(水稻)의 묘생육(苗生育)에 대(對)하여 인산(燐酸), 철(鐵) 및 알루미늄의 개량적(改良的) 또는 저해적(沮害的) 효과(效果)를 석회(石灰)의 영향하(影響下)에서 검사(檢討)한 바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 특이산성답(特異酸性畓) 심토(心土)는 석회(石灰)가 시용(施用)되어도 건조(乾燥)되면 다시 pH가 저하(低下)된다. 2. Eh는 담수(湛水) 5일경(日頃)에 최저(最低)로 되고 석회시용(石灰施用)으로 크게 하강(下降)되나 건조(乾燥)되면 다시 상승(上昇)된다. 3. 수용성(水用性) 및 Morgan 용액가용(溶液可溶) 2 가철(價鐵)의 함량(含量)은 담수(湛水) 15일경(15日頃)에 최고(最高)로 되며 수용성(水用性) 2 가철(價鐵)만이 석회시용(石灰施用)에 의(依)하여 크게 감소(減少)된다. 4. 수용성(水用性) 및 Morgan 용액가용(溶液可溶) 알루미늄 함량(含量)은 담수(湛水)와 석회시용(石灰施用)으로 감소(減少)되며 건조(乾燥)에 의(依)하여 약간 증가(增加)되는 경향(傾向)이다. 5. 석회(石灰)를 시용(施用)한 특이산성답(特異酸性畓) 토양(土壞)에서 수용성(水用性) 석회(石灰)와 황산함량(黃酸含量) 간(間)에는 고도(高度)의 유의성(有意性) 있는 부상관(負相關) 관계(關係)가 있으며 석회시용(石灰施用)은 토양(土壞)의 황산함량(黃酸含量)을 감소(減少)시킨다. 6. 전린(全燐)은 특이산성답(特異酸性畓) 표토(表土)에서 496.3ppm, 심토(心土)에서 387.5ppm이었으며 무기인(無機燐)의 함량(含量)은 Fe-P>Occ.Fe-P>Ca-P>Occ.Al-P>Al-P 의 순(順)으로 Fe-P가 가장 많았다. 7. 석회시용(石灰施用)은 토양(土壞)의 Ca-P나 Al-P 등(等)을 크게 증가(增加)시키고 Occ. Fe-P와 Occ. Al-P도 증가(增加) 시키나 Fe-P는 감소(減少)시키는데 그 정도(程度)는 토양(土壞)에 따라 다르다. 8. 수도묘(水稻苗)의 건물중(乾物重)에 대(對)한 인산효과(燐酸?果)는 현저(顯著)하며 석회(石灰)를 시용(施用)하지 않을때는 인산(燐酸) 흡수계수(吸收係數)의 6.8%, 석회(石灰)를 시용(施用)할 때는 인산(燐酸) 흡수계수(吸收係數)의 10.0% 해당량(該當量)에서 가장 많은 건물중(乾物重)을 생산(生産)하였다. 9. 석회(石灰) 시용(施用)은 수도묘중(水稻苗中)의 석회(石灰) 및 규산(珪酸)의 함량(含量)과 그 흡수량(吸收量)을 증가(增加)시키나 철(鐵) 및 알루미늄함량(含量)과 그 흡수량(吸收量)을 감소(減少)시킨다. 묘중(苗中)의 인산함량(燐酸含量)이나 흡수량(吸收量)은 인산시용(燐酸施用)으로 증가(增加)되나 철함량(鐵含量)은 감소(減少)되며, 철(鐵)이나 알루미늄의 시용(施用)은 이들의 함량(含量)과 흡수량(吸收量)을 증가(增加)시키나 인산함량(燐酸含量)과 흡수량(吸收量)은 감소(減少)시킨다. 10. 석회(石灰)의 시용(施用)은 과잉(過剩)의 철(鐵)과 알루미늄에 의(依)한 피해(被害)를 크게 경감(輕滅)시킨다. 11. 인산(燐酸) 시용시(施用時) 묘(苗)의 건물중(乾物重)은 묘중(苗中)의 인산(燐酸), 석회(石灰) 및 규산(珪酸)의 흡수량(吸收量)과 고도(高度)의 유의성(有意性)있는 정상관관계(正相關關係)가 있었고 철(鐵) 및 알루미늄 시용시(施用時) 건물중(乾物重)은 석회(石灰), 규산(珪酸)의 함량(含量) 및 그 흡수량(吸收量)과는 유의성(有意性) 있는 정상관(正相關), 철(鐵) 및 알루미늄의 함량(含量)과 이들의 흡수량(吸收量)과는 유의성(有意性)있는 부상관(負相關) 관계(關係)가 있었다. 12. 석회(石灰)와 인산(燐酸)을 시용(施用)하였을 때 묘(苗)의 건물중(乾物重)은 시험(試驗) 후(後) 토양(土壤)의 pH 및 Morgan 용액(溶液) 가용(可溶) 석회(石灰) 함량(含量)과 고도(高度)의 유의성(有意性)있는 정상관(正相關) 관계(關係)가 있었고 석회(石灰)와 철(鐵) 및 알루미늄을 시용(施用)한 시험(試驗) 후(後) 토양(土壤)의 pH와 석회(石灰) 및 규산함량(珪酸含量)과도 유의성(有意性)있는 정상관(正相關), 철(鐵) 및 알루미늄의 함량(含量)과는 부(負)의 상관관계(相關關係)가 있었다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• Applied Biological Chemistry
• /
• 제9권
• /
• pp.125-147
• /
• 1968

I. 수도(水稻)에 대(對)한 질소(窒素)의 합리적시용법(合理的施用法)을 확립(確立)하기 위(爲)한 일환(一環)의 연구(硏究)로서 못자리의 질소시용량(窒素施用量)과 못자리 말기(末期)에 있어서의 요소엽면살포(尿素葉面撒布)가 묘(苗)의 소질(素質) 특(特)히 질소(窒素)의 흡수(吸收) 및 발근력(發根力)에 미치는 영향을 알고자 시험(試驗)한바 그 결과(結果)는 다음과 같다. 1. 못자리에 $3.3\;m^2$ 당(當) 요소(尿素) 45g 토양시비(土壤施肥)한 것은 질소함량(窒素含量)이 1.835%인데 65g 시비구(施肥區)는 2.191%로서 유의차(有意差)를 인정(認定)하였다. 2. 못자리 말기(末期)의 요소엽면살포구(尿素葉面撒布區))$(T_{1},\;T_2)$는 무처리구(無處理區)$(T_0)$에 비(比해)서 모두 질소함량(窒素含量)이 증대(增大)되고 있으며 처리간(處理間)에 유의차(有意差)를 인정(認定)하였다. 즉 무처리구(無處理區)$(T_0)$는 질소함량(窒素含量)이 1.958%인데 0.5% 요소액살포구(尿素液撒布區)$(T_1)$는 2.020%이며 1.0% 요소액살포구(尿素液撒布區)$(T_2)$는 2.063%였다. 3. 요소농도(尿素濃度)가 낮은 $T_1$ 구(區)에 대해서 10% 요소액(尿素液)과 동량(同量) 요소(尿素)를 토양(土壤)에 시비(施肥)한 구(區)$(T_2)$는 질소(窒素)의 함량(含量)이 2.011%로서 오히려 낮으며 엽면살포(葉面撒布)가 모의 질소함량(窒素含量)을 증대(增大)시켰으며 이앙후(移秧後)의 착근(着根)과 초기(初期) 생육(生育)을 촉진(促進)시켰다. 4. 못자리에 $3.3\;m^2$ 당(當) 요소(尿素) 45g 토양시비구(土壤施肥區)$(N_1)$는 탄소함량(炭素含量)이 22.57%인데 65g 시비구(施肥區)$(N_2)$는 23.10%로서 유의차(有意差)가 인정(認定)되며 질소사용량(窒素使用量)이 더 많을 경우에 탄소함량(炭素含量)도 높았다. 5. 요소엽면살포(尿素葉面撒布) 및 토양시비구(土壤施肥區)의 탄소함량(炭素含量)은 $T_1$ 구(區)22.86% $T_2$ 구(區) 23.10% $T'_2$ 구(區) 22.95%로서 $T_0$구(區) 22.43%에 비(比)하여 높았으며 질소흡수(窒素吸收)가 커지는데 비례(比例)해서 증대(增大)되고 있다. 6. C/N율(率)에 있어서는 토양시비구간(土壤施肥區間)과 못자리 말기(末期)의 요소엽면살포구간(尿素葉面撒布區間) 모두 유의차(有意差)가 인정(認定)되며 질소시용량(窒素施用量)이 많은 경우에 C/N율(率)이 낮았다. 7. 발근수(發根數)는 $N_1$ 구(區)보다 $N_2$ 구(區)가 조사기간중(調査期間中)$1{\sim}2$개(個)가 많았으며 못자리말기(末期)에 질소시용(窒素施用)도 역시 발근수(發根數)를 증대(增大)시켰다. 8. 근장(根長)에 있어서도 처리간변이(處理間變異)가 발근수(發根數) 경우와 동일(同一)한 경향(傾向)이였다. 9. 모의 질소(窒素) 및 소소함량(素素含量)이 높고 C/N율(率)이 낮은 것이 발근수(發根數) 및 근장(根長)을 증대(增大)시켰다. II. 수전기에 있어서의 전엽(剪葉)의 정도(程度)와 요소엽면살포(尿素葉面撒布)가 수도(水稻)의 등숙(登熟) 및 수량(數量)에 미치는 영향을 알고자 하였으며 식물체(植物體)의 질소(窒素) 및 탄소함량(炭素含量)을 분석(分析)하여 이들과 수량(數量)의 관계(關係)를 살펴 보았던바 결과(結果)는 다음과 같다. 1. 1수평균중(穗平均重)은 전엽(剪葉)의 정도(程度)가 클수록 저하(低下)하였으며 요소(尿素)의 엽면살포(葉面撒布)는1수평균중(穗平均重)을 증가(增加)하는데 도움이 되었고 1회살포구(回撒布區)(B)보다 2회살포구(回撒布區) (A)가 더 유효(有效)하였다. 2. 벼의 등숙율(登熟率)은 전엽처리간(剪葉處理間)에 고도(高度)의 유의차(有意差)를 인정(認定)하였으며 전엽(剪葉)의 정도(程度)가 클 수록 등숙율(登熟率)이 낮았다. 한편 질소(窒素)의 엽면살포(葉面撒布)가 등숙율(登熟率)에 미치는 영향(影響)은 보통(普通)의 유의성(有意性)을 보일 정도로 유효(有效)하였다. 전엽(剪葉)의 정도(程度)와 등숙율(登熟率)과의 상관관계(相關關係)를 계산(計算)하여 본즉 상관계수(相關係數)(r)는 0.961로서 고도의 상관(相關)을 보이고 존치엽수(存置葉數)가 많을수록 등숙율(登熟率)은 높았다. 3. 정조천립중(正租千粒重)에 미치는 전엽(剪葉)의 영향(影響)은 무전엽구(無剪葉區) (f)의 정조천립중(正租千粒重) 28.05g을 100으로 하였을 때 1매존치구(枚存置區) (a) 84.88, 2 매존치구(枚存置區) (b) 31.51, 3 매존치구(枚存置區) (c) 95.08, 4 매존치구(枚存置區) (d) 97.29, 5 매존치구(枚存置區) (e) 100.40dml 수치(數値)를 보였으며 이들간의 상관계수(相關係數)(r)는 0.925로서 고도(高度)의 상관(相關)을 보여 존치엽수(存置葉數)가 많을수록 높았다. 한편 요소엽면살포(尿素葉面撒布)가 정조천립중(正租千粒重)에 미치는 효과는 무살포구(無撒布區) (c) 정조천립중(正租千粒重) 25.89g을 100으로 하면 B 구(區) 103.20이고, A 구(區)는 105.56의 지수(指數)를 보였으며 처리간(處理間)에 고도(高度)의 유의성(有意性)을 보이고 있다. 4. 정조중(正租重)에 미치는 전엽(剪葉)의 영향(影響)은 전엽(剪葉)의 정도(程度)가 클 수록 정조중(正租重)은 저하(低下)하였으며, f 구(區)의 정조중(正租重) 172.7g을 100으로 하였을 때 a 구(區) 64.10, b 구(區) 71.63, c 구(區) 78.23, d 구(區) 82.22, e 구(區) 99.89의 지수(指數)를 보였고 전엽(剪葉)의 정도(程度)와 정조중(正租重)과의 상관계수(相關係數)(r)는 0.971로서 고도(高度)의 상관(相關)을 보이고 있다. 한편 요소(尿素)의 엽면살포(葉面撒布)의 효과(效果)는 통계적(統計的)으로 보아 유의차(有意差)가 인정(認定)되며 c 구(區) 133.0g을 100으로 하였을때 B 구(區) 104.88이고 A 구(區)는 117.22의 지수를 보였다. 5. 현미수량은 f 구(區) 145.94g을 100으로 하였을때 a 구(區) 33.41 b 구(區) 42.29, c 구(區) 64.85 d 구(區) 70.20 그리고 e 구(區)는 92.25의 지수(指數)를 보여 처리간(處理間)에 고도(高度)의 유의차(有意差)를 보였으며 제현율(製玄率)은 f 구(區) 84.50% a 구(區) 44.04%, b 구(區) 49.89%, c 구(區) 70.05% d 구(區) 72.15% e 구(區)는 77.87%였다. 한편 요소(尿素)의 엽면살포구(葉面撒布區)의 현미수량(玄米數量)은 C 구(區)의 수량 88.47g을 100으로 하였을 때 B 구(區) 109.85, A 구(區)는 124.98의 지수(指數)를 보였다. 6. 제현율(製玄率)은 C 구(區) 66.51%이고, B 구(區) 69.77% A 구(區) 70.93%을 보였다. 7. 질소함량(窒素含量)은 요소엽면살포(尿素葉面撒布)에 의하여 이삭이나 잎에 있어서 모두 증대(增大)하여 무살포구(無撒布區) (C) 1.341% 및 1.479%인데 요소엽면살포구(尿素葉面撒布區) (B)는 1.369% 및 1.491%의 분석치(分析値)를 보였다. 8. 탄소함량(炭素含量)은 질소(窒素)의 경우와 같이 요소엽면살포(尿素葉面撒布)에 의하여 모두 증대(增大) 되었으며, 무살포구(無撒布區) (C)의 이삭 37.000% 및 43.915%의 분석치(分析値)를 보였다. 9. C/N율(率)은 이삭에 있어서는 처리간(處理間)에 차이(差異)가 없었고 잎에서만 요소엽면살포구(尿素葉面撒布區)가 약간 높았다. 10. 현미수량(玄米數量)과 질소(窒素), 탄소함량(炭素含量) 및 C/N율간(率間)에는 고도(高度)의 상관(相關)을 보였으며 질소(窒素) 및 탄소함량(炭素含量) 그리고 C/N율(率)이 높을 수록 수량(數量)을 증대(增大)하였다. III. 수비(穗肥)로써 요소엽면살포(尿素葉面撒布)의 효과(效果) 및 그 시기(時期)를 알고자 시험(試驗)한바 그 결과(結果)는 다음과 같다. 1. 간장(稈長), 수장(穗長 ) 및 수수(穗數에)는 차이(差異)를 인정(認定)하지 못하였다. 2. 1수평균(穗平均) 영화수(潁花數)는 수비시용시기간(穗肥施用時期間)에 보통(普通)의 유의성(有意性)을 보였고 수비시용시기(穗肥施用時期)가 빠를 수록 증대(增大)하는 경향(傾向)을 보였으며 수비시용방법간(穗肥施用方法間)에서는 유의성(有意性) 차이(差異)가 인정(認定)되지 않았으나 수치적(數値的)으로는 요소(尿素) 2.0%액(液) 엽면살포구(葉面撒布區)가 가장 많아서 65.9 입(粒), 요소(尿素) 10%액(液) 토양시용구(土壤施用區) 65.6 입(粒), 요소(尿素) 2.0%액(液) 토양시용구(土壤施用區) 64.4 입(粒), 대조구(對照區) 63.9 입(粒)의 순위로 적었다. 3. 등숙율(登熟率)은 수비시용기간(穗肥施用期間)에는 보통(普通)의 유의차(有意差)를 보였고 수비시용기(穗肥施用期)가 출수기(出穗期) 7일(日)까지에서는 늦을수록 약간 높아지는 경향(傾向)을 보였으며 수비시용방법(穗肥施用方法)에 있어서는 요소(尿素) 2.0%액(液) 엽면살포구(葉面撒布區)와 10%액(液) 토양시용구(土壤施用區)가 현저(顯著)히 높아서 89.8% 및 89.4%를 보였고 요소(尿素) 2.0%액(液) 토양시용구(土壤施用區)는 87.8% 및 87.5%를 보여 이들 처리간(處理間)에 고도(高度)의 유의성(有意性)을 보였다. 4. 정조천립중(正租千粒重)은 수비시용시기간(穗肥施用時期間)에 고도(高度)의 유의차(有意差)가 인정(認定)되며 등숙율(登熟率)의 경우와 같이 출수전(出穗前) 7일(日)까지에서는 수비(穗肥)가 늦을 수록 천립중(千粒重)은 증대(增大)하는 경향(傾向)을 보였으며 수비시용방법간(穗肥施用方法間)에 있어서도 고도(高度)의 유의차(有意差)가 인정(認定)되었고 요소(尿素) 2.0%액(液) 토양시용구(土壤施用區)는 23.18g로서 가장 높았다. 5. $3.3\;m^2$당 정조수량(正租收量)은 수비시용시기간(穗肥施用時期間)에는 유의차(有意差)가 인정(認定)되지 않았으며 수비시용방법(穗肥施用方法)에 따르는 차이(差異)는 고도(高度)의 유의차(有意差)를 보여 요소(尿素) 2.0%액(液) 엽면살포구(葉面撒布區) 및 요소(尿素) 10%액(液) 토양시용구(土壤施用區)가 현저(顯著)히 높아 1.486kg 및 1.491kg을 냈고 요소(尿素) 2.0%액(液) 토양시용구(土壤施用區) 및 대조구(對照區)는 1.381kg 및 1.486kg이었다. 6. 제현율(製玄率)은 수비시용시기간(穗肥施用時期間)에는 유의차(有意差)를 인정(認定)하였으며 수비시기(穗肥時期)가 출수전(出穗前) 14일(日)이 되던 때가 가장 높았으며 수비방법(穗肥方法)에 따르는 제현율(製玄率)은 처리간(處理間)에 고도(高度)의 유의차(有意差)를 인정(認定)할 수 있었고 요소(尿素) 2.0%액(液) 엽면살포구(葉面撒布區) 및 10%액 토양시용구(土壤施用區)는 84.72% 및 84.06%로서 현저(顯著)히 높고 요소(尿素) 2.0%액(液) 토양시용구(土壤施用區) 및 대조구(對照區)는 83.29% 및 82.56을 보였다. 7. $3.3\;m^2$당 현미수량(玄米收量)은 수비시간(穗肥時間)에 유의차(有意差)를 인정(認定)하였고 수기비(穗期肥)가 빠른 출수기전(出穗期前) 21일(日)에 시용(施用)한 것이 1.192kg로서 가장 많았으며 수비시용방법간(穗肥施用方法間)에 있어서는 통계적(統計的)으로 고도(高度)의 유의차(有意差)를 보이고 있으며 요소(尿素) 2.0%액(液) 엽면살포구(葉面撒布區) 및 10%액(液) 토양시용구(土壤施用區)는 1.259kg 및 1.254kg으로써 현저(顯著)히 높고 요소(尿素) 2.0%액(液) 토양시용구(土壤施用區) 및 대조구(對照區)는 각각(各各) 1.149kg 및 1.095kg로써 낮았다. 8. 수비(穗肥)로서 요소(尿素)를 시용(施用)한 경우 식물체내(植物體內) (窒素含量)은 증대(增大)되었는데 요소엽면살포(尿素葉面撒布)가 토양시용(土壤施用)보다 효과적(效果的)이였으며 식물체내(植物體內) 요소함량(尿素含量)의 증대(增大)와 더불어 대체로 탄소함량(炭素含量)도 증대(增大)되는 경향(傾向)을 보였다.