• 대한전자공학회논문지
• /
• 제25권7호
• /
• pp.746-758
• /
• 1988

This paper proposes a code scheduling algorithm which gives a software solution to the pipeline interlock. This algorithm provides a heuristic solution by recordering the instructions, instead of using hardware interlock mechanism when pipeline interlock prevents the execution of a machine instruction in a pipelined architecture. Program code size and overall execution time can be reduced due to the increased flexibility in the selection of instructions, which is possible from the alleviated ordering restriction on the use of conflict resources.

• Journal of Positioning, Navigation, and Timing
• /
• 제7권1호
• /
• pp.1-14
• /
• 2018

The Global Positioning System (GPS) provides more accurate positioning estimation performance by processing L1 and L2 signals simultaneously through dual frequency signal processing technology at the L-band rather than using only L1 signal. However, if anti-spoofing (AS) mode is run at the GPS, the precision (P) code in L2 signal is encrypted to Y code (or P(Y) code). Thus, dual frequency signal processing can be done only when the effect of P(Y) code is eliminated through the L2 signal processing technology. To do this, a codeless technique or semi-codeless technique that can acquire phase measurement information of L2 signal without information about W code should be employed. In this regard, this paper implements L2 signal processing technology where two typical codeless techniques and four typical semi-codeless techniques of previous studies are applied and compares their performances to discuss the optimal technique selection according to implementation environments and constraints.

• 한국정밀공학회지
• /
• 제20권1호
• /
• pp.118-125
• /
• 2003

As consumer's desire becomes various, agility of mold manufacturing is the most important factor for competitive mold manufacturer. Decision making process is required to produce optimal result of CAM systems in using commercial CAM system to generate tool path. The paper proposes a methodology fur computer-assisted tool selection procedures for various cutting type of rough, semi-rough and finish cuts. The procedure provides assistance for machining tool selection by analyzing sliced CAD model section of die cavity and core. Information about machining time for the generated NC-code is used to aid the tool selection. The module is developed with commercial CAM API. This module will be used fur the optimization of tool selection and planning process.

• 한국통신학회논문지
• /
• 제29권12A호
• /
• pp.1319-1332
• /
• 2004

최근 MC DS-CDMA시스템은 차세대 고속 데이타 전송을 위해 활발히 연구되고 있지만 높은 PAPR(peak-to-average power ratio)을 가지는 단점이 있다. 반면 CS-CDMA시스템은 코드 선택 방식을 사용함으로써 부 채널수에 상관없이 일정한 크기의 송신 신호로 인해 낮은 PAPR가진다. 본 논문에서는 MC DS-CDMA와 CS-CDMA의 결합한 새로운 다중접속 방식인 MC CS-CDMA(multicarrier code select CDMA)을 제안한다. MC CS-CDMA 시스템은 특별한 경우로서 MC DS-CDMA시스템과 CS-CDMA시스템을 포함한다. MC CS-CDMA 시스템은 주파수 선택적 다중경로 채널과 MRC를 가진 레이크 수신기에서 성능 및 PAPR을 비교 분석한다. 시뮬레이션 결과 MC CS-CDMA 시스템이 CS-CDMA에 비해 높은 PAPR을 가지지만 MC DS-CDMA에 비해 PAPR을 줄일 수 있다. 또한 수치해석의 결과 MC CS-CDMA 시스템이 확산 이득과 시간 다이버시터 이득의 증가로 인해 MC DS-CDMA에 비해 우수한 성능을 가진다. 그러나, MC CS-CDMA 시스템은 수신기의 복잡도 증가와 가입할 수 있는 사용자수가 감소하는 단점을 가진다.

• 한국기술혁신학회:학술대회논문집
• /
• 한국기술혁신학회 2002년도 추계학술대회
• /
• pp.45-57
• /
• 2002

Since a new entrant in the telecommunications market requires time in order to construct its own network, a requirement on the incumbent operator to implement carrier selection and pre-selection can enable a new entrant to immediately attract customers and earn revenue. Carrier selection can normally be accomplished in two ways, on a call-by-call basis or through carrel pre-selection. Call-by-call selection allows customers to choose a new entrant rather than the incumbent carrier using a specific code designated to the new carrier each time a call is made. Carrier Pre-Selection, on the other hand, allows customers directly connect to the network of one provider to have access automatically to another company's services when they pick up the phone to make certain types of calls. The carrier pre-selection option is generally considered to be a second regulatory step following the implementation of the call-by-call carrier selection option. Carrier pre-selection with the ability to override on a call-by-call basis for long distance, international, local, and fixed-to-mobile calls has now been implemented in many EU countries. This paper attempts to identify the issues in introducing CPS and to draw policy implications from other countries' experiences.

• 드라이브 ㆍ 컨트롤
• /
• 제20권3호
• /
• pp.9-14
• /
• 2023

In this paper, the selection of a reliable accelerated life test code for a 2-ton forklift was accomplished by choosing the driving resistance coefficient failure-free test time based on a 10,000-hour B₁₀ life. The overall life and average equivalent load of the vehicle were then calculated based on actual driving test conditions using the selected driving resistance coefficient. The gear train's accelerated life test code was selected by adjusting the equivalent load to a torque and rotation speed that did not exceed 125%(about 75HP) of the vehicle rated power. The safety of the test standards was validated by conducting an actual accelerated life test utilizing the proposed test method in this study and comparing the test result with the corresponding theoretical value. It is anticipated that the reliability of the accelerated life test in this paper will be enhanced, by incorporating actual driving performance data collected directly from the forklift and adjusting the conditions used in developing the accelerated life test code.

• 한국지진공학회논문집
• /
• 제21권4호
• /
• pp.171-179
• /
• 2017

For estimating the seismic demand of buildings, most seismic design provisions permit conducting linear and nonlinear response history analysis. In order to obtain reliable results from response history analyses, a proper selection of input ground motions is required. In this study, an accurate algorithm for selecting and scaling ground motions is proposed, which satisfies the ASCE 7-10 criteria. In the proposed algorithm, a desired number of ground motions are sequentially scaled and selected from a ground motion library without iterations.

• 한국통신학회논문지
• /
• 제38A권6호
• /
• pp.465-470
• /
• 2013

본 연구에서는 이차원 인접 심볼간 간섭(2D ISI) 및 인접 페이지간 간섭 (IPI)을 줄이며, 고립된 픽셀이 발생하지 않는 홀로그래픽 저장장치를 위한 이차원 변조부호를 선택하는 문제를 고려한다. 본 연구에서 고려하는 2D ISI 및 IPI를 줄이기 위한 변조부호 선택문제에서는 코드 내부에서 인접 셀간 심볼값의 차이를 최소화하고, 사용된 심볼의 분포가 균등하고, 선택된 코드워드가 임의로 이차원에 배열될 때, 고립된 픽셀이 발생할 수 없는 코드워드를 선택한다. 코드워드 선택 문제와 선택된 코드워드에서 고립된 픽셀의 발생여부를 검색하는 모형은 정수계획법 모형으로 형성되고, 두 모형을 결합하는 절단평면(cutting plane) 알고리즘을 개발하였다. 제안된 알고리즘을 사용하여 $4{\times}2$ 6/8 변조부호에서 고립된 픽셀이 발생하지 않으면서, 2D ISI와 IPI를 줄일 수 있는 코드워드를 계산하였다.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.430-438
• /
• 2021

The spatial distribution of neutron flux or reaction rate was calculated by cell or mesh tally in traditional Monte Carlo simulation. However, either cell or mesh tally leads to the increase of memory consumption and simulation time. In this paper, the function expansion tally (FET) method was developed in Reactor Monte Carlo code RMC to solve this problem. The FET method was applied to the tallies of neutron flux distributions of uranium block and PWR fuel rod models. Legendre polynomials were used in the axial direction, while Zernike polynomials were used in the radial direction. The results of flux, calculation time and memory consumption of different expansion orders were investigated, and compared with the mesh tally. Results showed that the continuous distribution of flux can be obtained by FET method. The flux distributions were consistent with that of mesh tally, while the memory consumption and simulation time can be effectively reduced. Finally, the convergence analysis of coefficients of polynomials were performed, and the selection strategy of FET order was proposed based on the statistics uncertainty of the coefficients. The proposed method can help to determine the order of FET, which was meaningful for the efficiency and accuracy of FET method.

• 정보과학회지
• /
• 제25권9호
• /
• pp.38-45
• /
• 2007