• 한국통신학회논문지
• /
• 제29권10A호
• /
• pp.1123-1130
• /
• 2004

본 논문에서는 OVSF 코드의 단일 코드 인덱싱 기법과 이를 기반으로 하는 다단 확산 방식을 이용한 효율적인 코드 생성 기법을 제안한다. 기존의 코드 트리 구조(code-tree structure) 기반의 인덱싱 방식에서는 확산 계수와 코드 번호라는 두 개의 인덱스를 이용하여 하나의 코드워드(codeword)를 표시한 반면에 단일 코드 인덱싱 기법에 서는 하나의 코드 인덱스만을 사용하여 각 층의 코드워드의 확산 계수와 코드 번호를 모두 표시할 수 있다. 단일 코드 인덱스의 이진 표현은 코드워드의 패턴을 나타내 주어 코드워드를 코드 인덱스로부터 직접 생성할 수 있게 할 뿐만 아니라, 두 개의 다른 코드워드의 직교 여부를 코드 인덱스의 비교로 결정할 수 있게 한다. 본 논문에서는 긴 코드의 확산을 여러 단계의 짧은 코드의 확산으로 나누어 실행하도록 하는 다단 확산 방식을 코드 생성에 적용하여 3GPP UMTS 시스템을 위한 빠르고 효율적인 코드 생성기를 설계하고 검증하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.11-14
• /
• 1998

This paper introuces a new efficient method of synchronization acquisition which is the most important element in DS-CDMA system using the phase offset of binary code. This approach uses the binary code function which can easily estimate the phase offset from the received spreading waveforms which respect to the receiver-stored replica of the spreading code. This paper proposes the initial acquisition model with repeat error control device that is good for perfomance. The hardware is implemented by TMS320c30

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1027-1030
• /
• 1999

Recently many efforts on the development of automatic processing system for delivery sequence sorting have been performed in ETRI, which requires the use of postal 4 state bar code system to encode delivery points. This paper addresses the issue on the reduction of reading error in postal 4 state raster beam based bar code reader by adjusting measured values of bar code width to its average value over each interval. The test results show that the above method reduces the average reading error rate approximately by 90-100%.

• 한국통신학회논문지
• /
• 제23권9A호
• /
• pp.2131-2140
• /
• 1998

Signal-to-interference ratio (SIR)-based dynamic code allocation method to be rioritized for handoff call is proposed and evaluated in a direct sequence-code division multiple access (DS-CDMA) cellular systm. Proposed method allocates a code to a mobile terminal according to the restidual capacity computed by SIR in the base station. We consider the voice activity detection to increase the system capacity. We evaluate the performance of proposed method with computer simulation. And the handoff decision function that controls handoff of mobile terminal is interodcued. The proposed method provide much improvement in the forced termination probability and handoff call fail probability.

• Nuclear Engineering and Technology
• /
• 제28권3호
• /
• pp.320-330
• /
• 1996

The streaming rays(SR) method is improved and extended to multigroup, anisotropic scattering, and three-dimensional angular space(x-y-z(infinite))problems. This method is applied to the shielding problems in which the ray effect occurs seriously. For verification, the results of MORSE-CG code are used as reference solution and the results of TWODANT code are compared. The results show that solutions of the SR method are much better than those of the TWODANT code and are in good agreement with those of the MORSE-CG code. Also, to reduce computing time, two acceleration algorithms are implemented in the SR method : the standard coarse-mesh rebalance and a new angular two-grid acceleration.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.395-402
• /
• 2005

This paper deals with modeling and computer simulation of a full multibody vehicle model for a driving simulator. The multibody vehicle model is based on the recursive formulation and a corresponding simulation code is generated automatically from AUTOCODE, which is a symbolic computation package developed by the authors using MAPLE. The paper describes a procedure for automatically generating a highly efficient simulation code for the full vehicle model, while incorporating realistically modeled components. The following issues have been accounted for in the procedure, including software design for representing a mechanical system in symbolic form as a set of computer data objects, a multibody formulation for systems with various types of connections between bodies, automatic manipulation of symbolic expressions in the multibody formulation, interface design for allowing users to describe unconventional force-and torque-producing components, and a method for accommodating external computer subroutines that may have already been developed. The effectiveness and efficiency of the proposed method have been demonstrated by the simulation code developed and implemented for driving simulation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.259-262
• /
• 2004

In most of the character recognition systems, the method of template matching or statistical method using hidden Markov model is used to extract and recognize feature shapes. In this paper, we used modified chain-code which has 8-directions but 4-codes, and made the chain-code of hand-written character, after that, converted it into transition chain-code by applying to HMM(Hidden Markov Model). The transition chain code by HMM is analyzed as signal flow graph by Mason's theory which is generally used to calculate forward gain at automatic control system. If the specific forward gain and feedback gain is properly set, the forward gain of transition chain-code using Mason's theory can be distinguished depending on each object for recognition. This data of the gain is reorganized as tree structure, hence making it possible to distinguish different hand-written characters. With this method, $91\%$ recognition rate was acquired.

• 한국위성정보통신학회논문지
• /
• 제5권1호
• /
• pp.54-57
• /
• 2010

위성 기반 측위 시스템은 위치 기반 기술의 핵심 기술로서, CDMA 시스템을 사용한다. CDMA 시스템에서 원활한 위치 측위를 하기 위해서는 확산 부호의 정확한 동기가 이루어져야 한다. 본 논문은 확산 부호의 동기 기법 가운데 부호 추적 기법에 초점을 맞춘다. 특히 다중 경로 환경에서 기존의 부호 추적 기법인 DLL 방법은 적합하지 않다. 본 논문은 수신 신호에서 다중 경로 신호를 축출하여 이를 부호 추적 기법에 사용하는 방법을 제안한다. Spirent simulator를 이용하여 제안 기법을 검증하고 성능 평가를 보인다.

• 대한임베디드공학회논문지
• /
• 제13권4호
• /
• pp.187-194
• /
• 2018

The operating system for IoT should have a small memory footprint and provide low power state, real-time, multitasking, various network protocols, and security. Although the Zephyr kernel, an operating system for IoT, released by the Linux Foundation in February 2016, has these features but errors generated by the user code can generate fatal problems in the system because the Zephyr kernel adopts a single-space method that both the user code and kernel code execute in the same space. In this research, we propose a space separation method, which separates kernel space and user space, to solve this problem. The space separation that we propose consists of three modifications in Zephyr kernel. The first is the code separation that kernel code and user code execute in each space while using different stacks. The second is the kernel space protection that generates an exception by using the MPU (Memory Protection Unit) when the user code accesses the kernel space. The third is the SVC based system call that executes the system call using the SVC instruction that generates the exception. In this research, we implemented the space separation in Zephyr v1.8.0 and evaluated safety through abnormal execution of the user code. As the result, the kernel was not crashed by the errors generated by the user code and was normally executed.

• 한국CDE학회논문집
• /
• 제21권3호
• /
• pp.313-324
• /
• 2016

As building information modeling (BIM) is expanding its influence in various fields of architecture, engineering, construction and facility management (AEC-FM) industry, BIM-based automated code compliance checking has become possible prospects. For the automated code compliance checking, requirements in building code need to be processed into explicit representation that enables automated reasoning. This paper aims to develop high-level methods that translate verb phrases into explicit representation. The high-level methods represent conditions, properties, and related actions of the building objects and clarify the core content of the constraints. The authors analyze building permit requirements in Korea Building Code and establish a standardized process of deriving the high-level methods. As a result, 60 kinds of the high-level methods were derived. In addition, method classification, analysis, and application are introduced. This study will contribute to the representation of explicit building code sentences and establishment of the automated building permit system of Korea.