• Nuclear Engineering and Technology
• /
• v.40 no.1
• /
• pp.37-48
• /
• 2008

Flow fields inside feeder pipes have been simulated numerically using a CFD (computational fluid dynamics) code to calculate the shear stress distribution, which is the most important factor in predicting the local regions of feeder pipes highly susceptible to FAC (flow-accelerated corrosion)-induced wall thinning. The CFD approach, with schemes used in this study, to simulate the flow situations inside the CANDU feeder pipes has been verified as it showed a good agreement between the investigation results for the failed feedwater pipe at Surry unit 2 plant in the U.S. and the CFD calculation. Sensitivity studies of the three geometrical parameters, such as angle of the first and second bends, length of the first span between the grayloc hub and the first bend, and length of the second span between the first and the second bends have been performed. CFD analysis reveals that the local regions of feeder pipes of Wolsung unit 1 in Korea, on which wall thickness measurements have been performed so far, are not coincident with the worst regions predicted by the present CFD analysis located in the connection region of straight and bend pipe near the inlet part of the bend intrados. Finally, based on the results of the present CFD analysis, a guide to the selection of the weakest local positions where the measurement of wall thickness should be performed with higher priority has been provided.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2221-2228
• /
• 2021

One-dimensional oxygen transport relation is indispensable to study the oxygen distribution in the LBE-cooled system with an oxygen control device. In this paper, a numerical research is carried out to study the oxygen transport characteristics in a gas-phase oxygen control device, including the static case and dynamic case. The model of static oxygen control is based on the two-phase VOF model and the results agree well with the theoretical expectation. The model of dynamic oxygen control is simplified and the gas-liquid interface is treated as a free surface boundary with a constant oxygen concentration. The influences of the inlet and interface oxygen concentration, mass flow rate, temperature, and the inlet pipe location on the mass transfer characteristics are discussed. Based on the results, an oxygen mass transport relation considering the temperature dependence and velocity dependence separately is obtained. The relation can be used in a one-dimensional system analysis code to predict the oxygen provided by the oxygen control device, which is an important part of the integral oxygen mass transfer models.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.391-401
• /
• 2021

Technological developments facilitate payment transactions. In 2020, Bank Indonesia issued a regulation that supports QR payments using the Indonesian Standard Quick Response Code (QRIS). PT ABC is one of the banks that launched a QR payment feature on mobile banking with QRIS standards to make it easier for customers to make payment transactions at various merchants. In its implementation, the interest of QR payment users still tends to be small, so an analysis of the interests of QR payment users is carried out. The purpose of this study is to analyze the factors that influence user interest by using a modified UTAUT model. The UTAUT model was modified by adding variables to perceived trust, perceived risk, perceived regulatory support, and promotional benefits. The population taken is the company's customers in the DKI Jakarta area and it takes 403 samples for this case study. The results of empirical analysis show that 8 out of 12 hypotheses are considered proven where business expectations, social influence, perceived trust, perceived risk, perceptions of regulatory support, promotion benefits, age-moderated performance expectations, and age-moderate effort expectations have a significant effect on behavioral intentions, while performance expectations, facilitation conditions, business expectations are moderated by experience and social influence.

• Journal of Korea Society of Waste Management
• /
• v.34 no.7
• /
• pp.685-696
• /
• 2017

This study focuses on computational particle fluid dynamics (CPFD) modeling for the fast pyrolysis of biomass in a conical spouted bed reactor. The CPFD simulation was conducted to understand the hydrodynamics, heat transfer, and biomass fast pyrolysis reaction of the conical spouted bed reactor and the multiphase-particle in cell (MP-PIC) model was used to investigate the fast pyrolysis of biomass in a conical spouted bed reactor. A two-stage semi-global kinetics model was applied to model the fast pyrolysis reaction of biomass and the commercial code (Barracuda) was used in simulations. The temperature of solid particles in a conical spouted bed reactor showed a uniform temperature distribution along the reactor height. The yield of fast pyrolysis products from the simulation was compared with the experimental data; the yield of fast pyrolysis products was 74.1wt.% tar, 17.4wt.% gas, and 8.5wt.% char. The comparison of experimental measurements and model predictions shows the model's accuracy. The CPFD simulation results had great potential to aid the future design and optimization of the fast pyrolysis process for biomass.

• Structural Engineering and Mechanics
• /
• v.69 no.1
• /
• pp.1-10
• /
• 2019

In the construction of flat plate slabs, which are widely used for tall buildings but have relatively low flexural stiffness, serviceability problems such as excessive deflections and cracks are of great concern. To prevent excessive deflections at service load levels, current design codes require the minimum slab thickness, but the requirement could be unconservative because it is independent on loading and elastic modulus of concrete, both of which have significant effects on slab deflections. In the present study, to investigate the effects of the construction load of shored slabs, reduced flexural stiffness and moment distribution of early-age slabs, and creep and shrinkage of concrete on immediate and time-dependent deflections, numerical analysis was performed using the previously developed numerical models. A parametric study was performed for various design and construction conditions of practical ranges, and a new minimum permissible thickness of flat plate slabs was proposed satisfying the serviceability requirement for deflection. The proposed minimum slab thickness was compared with current design code provisions and numerical analysis results, and it agreed well with the numerical analysis results.

• Earthquakes and Structures
• /
• v.17 no.1
• /
• pp.39-48
• /
• 2019

This paper presents an experimental study on a 1/2 scale steel frame with archaized-style under the pseudo-dynamic loading. Four seismic waves, including El Centro wave, Taft wave, Lanzhou wave and Wenchuan wave, were input during the test. The hysteresis characteristic, energy dissipation acceleration response, displacement response, strength, stiffness and strain were analyzed. Based on the experiment, the elastoplastic dynamic time-history analysis was carried out with the software ABAQUS. The stress distribution and failure mode were obtained. The results indicate that the steel frame with archaized-style was in elastic stage when the peak acceleration of input wave was no more than 400 gal. Under Wenchuan wave with peak acceleration of 620 gal, the steel frame enters into the elastoplastic stage, the maximum inter-story drift was 1/203 and the bearing capacity still tended to increase. During the loading process, Dou-Gong yielded first and played the role of the first seismic fortification line, and then beam ends and column bottom ends yielded in turn. The steel frame with archaized-style has good seismic performance and meets the seismic design requirement of Chinese code.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.4
• /
• pp.363-368
• /
• 2021

This study attempts to examine whether ownership of government-controlled corporations and audit committee effectiveness are related. The population of this study is 431 listed manufactured firms in the Saudi Stock Exchange (Tadawul) for the period 2012-2019 that published their financial and annual reports for the period 2012-2019. This population criterion is based on considerations that manufacturing companies listed on Tadawul have publicly accessible data and they have greater obligations to implement corporate governance code. Using the complementary hypothesis, this study predicts that there is a positive relationship between the ownership of government-controlled companies and audit committee effectiveness. The Pooled OLS regression shows that government-controlled companies' ownership is positively associated with audit committee effectiveness. Our study also indicates that ownership of government-controlled companies as a governance monitoring mechanism becomes more effective as it is combined with audit committee effectiveness which is another governance monitoring mechanism. The results of this study provide insightful evidence to policymakers at the company and country levels on the relationship of government-corporate ownership and audit committee effectiveness.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.7
• /
• pp.2531-2546
• /
• 2021

For several years, virtual reality (VR) and augmented reality (AR) technologies have been improving. However, some hurdles remain that slow down the distribution of VR and AR devices, such as head-mounted display (HMD), and related consumer content. One issue is VR motion sickness, which has been experienced by users using 360 degree VR content via HMD. This paper discusses the related international standardization work that classifies the factors causing VR sickness, and proposes the process for VR sickness level evaluation. Among the factors causing VR sickness, many research institutes regard minimizing MTP (Motion-to-Photon) latency as the key enabler to mitigate VR sickness. Thus, this paper introduces research trends of MTP latency measurement and MTP latency mitigation. This paper categorizes the research on MTP latency measurement into 2 categories of hardware-based approach and software code-level approach. The 2 approaches have different pros and cons depending on use-case, purpose, and architecture of each multimedia system. The pros and cons are addressed in this paper. Additionally, the research on mitigating MTP latency with diverse strategies such as proactive computing, caching, and edge server technology is explained, and compared to conventional technologies, shows improved performance.

• The Korean Journal of Applied Statistics
• /
• v.33 no.6
• /
• pp.665-682
• /
• 2020

This paper introduces numba library in Python, which improves computational efficiency of the provided implemented code written by naive Python language by applying just-in-time (JIT) compilation. To apply just-in-time compilation, the numba only needs to use a decorator on a target Python function. We provide implementation examples with numba for the permutation test and the parameter estimation for Gaussian mixture distribution. We also numerically show the efficiency of numba by comparing the total computation times of the implementation using naive python and the implementation using numba for each application.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.3
• /
• pp.908-928
• /
• 2022

Multiple target tracking mainly focuses on tracking unknown number of targets in the complex environment of clutter and missed detection. The generalized labeled multi-Bernoulli (GLMB) filter has been shown to be an effective approach and attracted extensive attention. However, in the scenarios where the clutter rate is high or measurement-outliers often occur, the performance of the GLMB filter will significantly decline due to the Gaussian-based likelihood function is sensitive to clutter. To solve this problem, this paper presents a robust GLMB filter and smoother to improve the tracking performance in the scenarios with high clutter rate, low detection probability, and measurement-outliers. Firstly, a Student-T distribution variational Bayesian (TDVB) filtering technology is employed to update targets' states. Then, The likelihood weight in the tracking process is deduced again. Finally, a trajectory smoothing method is proposed to improve the integrative tracking performance. The proposed method are compared with recent multiple target tracking filters, and the simulation results show that the proposed method can effectively improve tracking accuracy in the scenarios with high clutter rate, low detection rate and measurement-outliers. Code is published on GitHub.