• Bulletin of the Korean Space Science Society
• /
• 1992.10a
• /
• pp.15-15
• /
• 1992

AQ Cassiopeiae (BD+61`0242, uv=10, Sp=B3+Bg) is a totally eclipsing binary system with the obital period of about 12 days. 71 was observed for 15 nights in 1985 with the1.8-m telescope at the DAO, employing a Reticon and a three-stage image tube attached to the spectrograph. And also, photometric observations of AQ Cas had been made inUBv for six years from 1982 to 1988 at Yonsei University Observatory(YUO). This work includes UBV observations obtained at YUO as a part of The Ten-Year Observing Program(1982-1992). Double lined radial, velocity curves and Ufv light curves of AQC as are constructed. The light curves and radial velocity curves show a strong evidence of circumstellar matter or mass stream. It is clear at the phases of just outside externaleclipse contacts, particularly at phase 0.8-0.9, shown in Figures 1 and 2. A solution by combining the radial velocity and photometric curves of the binary was obtained with the Wilson-Devinney Code. We found that the system is semi-detached with the coolcomponent filling its Roche lobe. The absolute dimensions of AQ Cas are calculated. The result shows that this system consists of two massive and subgiant stars.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.2
• /
• pp.120-127
• /
• 2002

As a new type of a linear decorrelating receiver, the Pseudo-Decorrelator was presented for asynchronous code division multiple access systems by the author. In this paper, the concept of the Pseudo-Decorrelator is extended to derive a multiuser receiver for WCDMA uplink systems over a Rayleigh fading multipath channel. Starting with the analysis of the multiple access components of the decision statistics, a non-square cross-correlation matrix for each bit is obtained. This cross-correlation matrix is then inverted, and the inverted matrix is applied to the decision statistics obtained from a conventional receiver. This receiver is near-far resistant and outperforms conventional receivers even for the cases in which synchronization errors, such as time delay errors and phase errors exist.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.38-42
• /
• 2017

This paper introduces the concept of a dual hash function to amplify security in a quantum key distribution system. We show the use of the relationship between quantum error correction and security to provide security amplification. Also, in terms of security amplification, the approach shows that phase error correction offers better security. We describe the process of enhancing security using the universal hash function using the BB84 protocol, which is a typical example of QKD. Finally, the deterministic universal hash function induces the security to be evaluated in the quantum Pauli channel without depending on the length of the message.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.11
• /
• pp.997-1004
• /
• 2012

In enterprise software projects, performance issues have become more critical during recent decades. While developing software products, many performance tests are executed in the earlier development phase against the newly added code pieces to detect possible performance regressions. In our previous research, we introduced the framework to enable automated performance anomaly detection and reduce the analysis overhead for identifying the root causes, and showed Statistical Process Control (SPC) can be successfully applied to anomaly detection. In this paper, we explain the special performance trend in which the existing anomaly detection system can hardly detect the noticeable performance change especially when a performance regression is introduced and recovered again a while later. Within the fixed number of sampling period, the fluctuation gets aggravated and the lower and upper control limit get relaxed so that sometimes the existing system hardly detect the noticeable performance change. To resolve the issue, we apply dynamically tuned sampling window size based on the performance trend, and Fuzzy theory to find an appropriate size of the moving window.

• Journal of ILASS-Korea
• /
• v.12 no.1
• /
• pp.18-29
• /
• 2007

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle - installed downstream of the high pressure turbine extraction steam line - inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes the comparisons between the numerical analysis results using the FLUENT code and the down scale experimental data in an effort to determine root causes of the shell wall thinning of the high pressure feedwater heaters. The numerical analysis and experimental data were also confirmed by actual wall thickness measured by an ultrasonic test.

• Acta Via Serica
• /
• v.1 no.1
• /
• pp.119-135
• /
• 2016

The initial phase of the Mongol invasion resulted in the establishment of relative political stability in the vast expanses of Eurasia, which came under the control of a single political entity - the Mongol realm. This contributed to a fairly rapid restoration of the commercial links and trade routes between the East and the West. During this period, Chinese silk again became available in large quantities in the Western markets. At the same time, the beginning of silk production and manufacturing of silk fabrics in Italy and the fashion flash for these goods in Western countries affected trade between Europe and the Muslim world. The centers of silk production in the Ilkhanid Empire were some provinces of Azerbaijan and Persia, where from it was exported in large numbers along the trade routes of Anatolia and Syria to the Mediterranean ports and further to the west. There are numerous testimonies of European travelers, and Muslim authors related the international silk trade in 13th-15th centuries, ie in the era from the Mongol Ilkhanid Empire till the reign of the Turkman Aqqoyunlu dynasty. One of the most informative documentary sources on this issue are the legislative codes (kanuname) of sultan Uzun Hasan from the Aqqoyunlu dynasty regarding the eastern provinces of the Asia Minor. This article presents and analyzes the information from these documents concerning the whole range of goods related to silk and silk fabrics trade in the period under the consideration.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.6
• /
• pp.434-440
• /
• 2007

One of the cold start problems of a FCV is the freezing of the water in the water tank when a FCV is not in operation and the surrounding temperature drops below $0^{\circ}C$. The ice in the tank should be melted as quickly as possible for a satisfactory operation of fuel cell vehicles. In this study, the melting process for the constant heat fluxes of the plate heaters was numerically calculated in the 2-D model of the tank and plate heaters. The enthalpy method and FVM code was used for this analysis. The changes of the temperature with heat fluxes and the heat transfer area could be investigated. The energy balance error was found to increase with the heat flux. From this numerical analysis, the proper heat flux value and some important design factors relating local overheating and pressurization of the water tank could be examined.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.2
• /
• pp.254-261
• /
• 1999

An optimal design code for centrifugal pumps has been developed to determine geometric and fluid dynamic variables under appropriate design constraints. The optimization problem has been formulated with a nonlinear objective function to minimize one, two or all of the fluid dynamic losses, the net positive suction head required and the product price of a pump stage depending on the weighting factors selected as the design compromise. The optimal solution Is obtained by means of the Hooke and Jeeves direct search method. The performance analysis Is based on the mean streamline analysis using the present state-of-the-art loss correlations. The optimized efficiency and design variables of centrifugal pumps are presented in this paper as a function of non-dimensional specific speed in the range, $0.5{\leq}N$, ${\leq}1.3$. The diagrams presented herein can be used efficiently in the preliminary design phase of centrifugal pumps.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.1
• /
• pp.93-98
• /
• 2016

A large number of victims or witnesses to incidents and accidents should visit a police station and fill the decree stated. Stated decree workaround discomfort and hygienic problems in unnecessary step process using the fingerprint after you modify the modified portion when due modify the request as of the import or typos recognized that modifications and police in the. Stated decree in the investigation phase when creating KICS and electronic Resources investigation into the identity of the one-touch fingerprint reader linked with the introduction table system and thinning, which can simplify the day of the procedure.

• Journal of Radiation Protection and Research
• /
• v.29 no.1
• /
• pp.33-39
• /
• 2004

In order to vitrify the W1 waste (ion-exchange resin(IER), zeolite, and dry active waste(DAW)) generated from Korean Nuclear Power Plants, a glass formulation development based on waste compositions and production rates was performed. A aluminoborosilicate glass, AG8W1, was formulated to vitrify the W1 waste in an induction cold crucible melter(CCM). The processability, product performance, and economics of the candidate glass were calculated using a computer code and were measured experimentally in the laboratory and CCM. The glass viscosity and electrical conductivity as the process parameters were in the desired ranges. Start-up and maintaining glass melt of the candidate glass were favorable in the CCM. The product quality of the glass such as chemical durability, phase stability, etc. was satisfactory. The vitrification process using the candidate glass was also evaluated to be operated as economically as possible.