• 한국철도학회논문집
• /
• 제8권5호
• /
• pp.405-410
• /
• 2005

In this paper, the train resistances for HSR-350x(Korean High Speed Train project), which has been obtained by the coast-down test, have been proposed in cases of the open field and tunnel. They are approximated as quadratic functions suggested by the Davis equation. The coast-down simulations for HSR-350x using the estimated train resistances have performed and the results have been compared with those of the same conditions of the coast-down tests. It is concluded that the proposed train resistances can be considered to provide good estimations for HSR-350x. Also, the effects of the infrastructure conditions, such as tracks, curves and tunnels have been reviewed. These results show that the tunnel plays an important role in determining the train resistance but others does not.

• 한국추진공학회지
• /
• 제21권3호
• /
• pp.18-24
• /
• 2017

가스터빈엔진의 시동점화 조건 달성 및 시동가속을 위해서는 엔진에 적합한 시동기를 선정하여야 한다. 이를 위해서는 시동 크랭킹 과정의 공력저항을 예측하여 시동성능을 파악하여야한다. 본 논문에서는 기 개발엔진의 Coast down 시험을 통하여 획득된 엔진속도 프로파일 데이터를 바탕으로 엔진 주축에 인간되는 공력저항을 도출하고, 압축기 부하를 기준으로 한 스케일링을 통해 대상엔진의 공력저항을 모델링하였다. 이후, 공력저항 모델과 공기시동기(ATS)의 토크 성능선도를 엔진 시동모델에 적용함으로써, 엔진시동에 적합한 시동기를 선정하는 방법을 제시한다.

• 한국자동차공학회논문집
• /
• 제3권2호
• /
• pp.51-61
• /
• 1995

A coast down test mothod has been used to determine the resistance forces on running vehicle due to the aerodynamic drag, rolling resistance and driveline resistance. Most of the tests, however, are based on the Velocity-Time measurements, which require a sophisticated velocity measuring device and contain much error by nature. In the present study a coast down test method based on Distance-Time measurements is introduced, which contains the original idea of Russian scientist Prof. Petrushov along with the suggestions for improvement of the accuracy.

• 자동차안전학회지
• /
• 제10권1호
• /
• pp.45-51
• /
• 2018

There are some ambiguities of the information on the fuel economy provided to the consumers because the standard and the detailed regulations for the fuel economy of the two-wheeled vehicle have not been established in Korea. Since Korea has been a signatory of World Forum for Harmonization of Vehicle Regulations since 1998, it is possible to remove the ambiguities by adopting the WMTC (Worldwide-harmonized Motorcycle Test Cycle) measurement method for the fuel economy of the two-wheel vehicle. As a preliminary study on the WMTC mode fuel economy, road loads measured by coast down method and table method were compared for the two types of two-wheeled motorcycles on sales in domestic market. In the same model, it was confirmed that the deviation of WMTC mode fuel efficiency was below -5% between products. On the other hand, the difference of WMTC fuel economy exceeded 5% between the coast down method and table method.

• 대한기계학회논문집B
• /
• 제30권9호
• /
• pp.858-865
• /
• 2006

SMART Pilot is a multipurpose small capacity integral type reactor. Main coolant pump (MCP) of SMART Pilot is a canned-motor-type axial pump to circulate the primary coolant between nuclear fuel and steam generator in the primary system. The reactor is designed to operate under condition of $310^{\circ}C$ and 14.7MPa. Thus MCP has to be tested under same operating condition as reactor design condition to verify its performance and safety. In present wort a test apparatus to simulate real operating situations of the reactor has been designed and constructed to test MCP. And then functional tests, performance tests, and endurance tests have been carried out upon a prototype MCP. Canned motor characteristics, homologous head/torque curves, coast-down curves, NPSH curves and lift-time performance variations were obtained from the qualification test as well as hydraulic performance characteristics of MCP.

• 한국지반공학회논문집
• /
• 제21권9호
• /
• pp.65-75
• /
• 2005

흙의 최대 전단탄성계수는 동적/정적 지반구조물 설계에서 중요하게 다루어야 하는 기본 토질상수이다. 본 연구에서는 서해안 송도 지역의 실트질 모래에 대해 표준관입시험, 콘관입시험, 자가굴착식 공내재하시험, 다운홀 시험, 탄성파 탐사 콘관입시험, 공진주 시험 등을 수행하여 최대 전단탄성계수를 구하고 그 결과를 통계적으로 분석하였다. 다운홀 시험을 기준으로 표준관입시험 및 콘관입시험에 대한 경험식으로 구한 최대 전단탄성계수를 비교하고 새로운 경험식물 제안하였다. 제안식으로 구한 전단탄성계수는 다운홀 시험 결과와 비교적 잘 일치하였으며, 제안식을 이용하여 적절히 지반의 최대 전단탄성계수를 평가할 수 있음을 확인하였다.

• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.1-8
• /
• 1995

In the companion paper of the present paper, a coast down test method to determine the resistance forces on running vehicle based on the distance-time measurement was explained along with the suggestions to improve its accuracy and testing methodology. In the present paper some of the suggestions discussed previously are implemented and actually road tested to see the applicability of the improved method(short distance method) in the field. From the results. it is shown that the short distance method which requires only 600m long proving ground road gives at least comparable results on the accuracy compared to the original S-t method which requires 2000m. It is hoped that the present method be further refiend to give more accurate results.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.211-219
• /
• 2003

The main study experiments to obtain engine torque of the vehicle during performance test of the recent automobile. Torque was measured through the engine dynamometer to produces engine torque of the vehicle but the research method calculated engine torque of the vehicle without the engine dynamometer. The performance of the vehicle receive various running resistance. The study certificates performance of certification before a certification of used vehicle didn't carry out and certificate. This way evaluated on road test and chassis dynamometer The result of the study shows that it is much possible to apply the test. After comparing the engine torque of road driving with that of chassis dynamometer, the results are approximately the same. When rapidly speeded up, the road-load vehicle can pitch in some degrees, which may result in the fluctuations of acceleration, and then affect on the engine torque. Therefore it is confirmed that this method is easier way to measure the performance of vehicles.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2023년도 춘계학술대회
• /
• pp.17-18
• /
• 2023

2022년 3월 15일부터 해양경찰청에서는 채용경로의 다양화를 위해 승선경력 없이도 해양경찰청 소속의 선박교통관제사(VTS_Of ficer) 채용시험에 응시 가능하도록 선박교통관제사의 자격 기준을 개정하였다. 본 연구를 통해서 선박교통관제업무 현황을 조사하고 현재까지 추진되어 온 선박교통관제규정, 선박교통관제사 자격 제도에 관한 중요한 규정의 제정 및 개정에 관한 사항등을 검토하여 관제 운영 국내 외 사례를 통해 관제 업무 수행 방안 별 장단점을 비교 분석한다. 또한, 선박교통관제사 자격 제도가 추후에 성공적으로 정착할 수 있도록 선박교통관제 업무의 향후 발전 방안을 제시하고자 한다.

• 한국해양공학회지
• /
• 제23권2호
• /
• pp.69-73
• /
• 2009

The objective of this study was to obtain a better understanding of the delayed hydride cracking (DHC) of Zr-2.5Nb alloy. The DHC model has some defects: first, it cannot explain why the DHC velocity (DHCV) becomes constant regardless of an applied stress intensity factor, even though the stress gradient is affected by the applied stress intensity factor at the notch tip. Second, it cannot explain why the DHCV has a strong dependence on the method of approaching the test temperature by a cool-down or a heating-up, even under the same stress gradient, and third, it cannot predict any hydride size effect on the DHC velocity. The DHC tests were conducted on Zr-2.5Nb compact tension specimens with the test temperatures reached by a heating-up method and a cool-down method. Crack velocities were measured in hydrided specimens, which were cooled from solution-treatment temperatures at different rates by being furnace-cooled, water-quenched, and liquid nitrogen-quenched. The resulting hydride size, morphology, and distributions were examined by optical metallography. It was found that fast cooling rates, which produce very finely dispersed hydrides, result in higher crack growth rates. This different DHC behavior of the Zr-2.5Nb tube with the cooling rate after a homogenization treatment is due to the precipitation of the $\gamma$-hydrides only in the water-quenched Zr-2.5Nb tube. This experiment will provide supporting evidence that the terminal solid solubility of a dissolution (TSSD) of $\gamma$-hydrides is higher than that of $\delta$-hydrides.