• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.9-14
• /
• 2009

In this research, a polyester manufacturing company (i.e. K Co.) in Gumi, South Korea was investigated regarding the release of high concentrations of 1,4-dioxane(about 600 mg/L) and whether treatment prior to release should occur to meet with the level of the regulation standard (e.g., 5 mg/L in 2011). The pilot-scale (reactor volume, 10 $m^3$) treatment system using Photo-Fenton Oxidation was able to remove approximately 90% of 1,4-dioxane under the conditions that concentrations of 2,800 ppm $H_2O_2$ and 1,400 ppm $FeSO_4$ were maintained along with 10 UV-C lamps (240 ${\mu}W/cm^2$) illuminated during aeration. However, the effluent concentration of 1,4-dioxane was still high at about 60 mg/L. Thus, further investigation is needed to see whether the bench scale (reactor volume, 8.9 L) of activated sludge could facilitate the decomposition of 1,4-dioxane. As a result, 1,4-dioxane in the effluent has been decreased as low as about 2~3 mg/L. Consequently, Photo-Fenton Oxidation coupled with activated sludge process can make it possible to efficiently decompose 1,4-dioxane to keep up with that of the regulation standard.

• Journal of Dairy Science and Biotechnology
• /
• v.32 no.2
• /
• pp.141-145
• /
• 2014

There is a burgeoning number of products on the market that contain probiotics, but do they do you any good? What exactly are probiotics? They have been defined as living organisms that, when ingested in sufficient quantities, provide health benefits beyond basic nutrition. They are often referred to as "friendly bacteria" or "good bacteria." Probiotics have been claimed, amongst other things, to (i) reduce the incidence of colon cancer and other diseases of the colon, such as IBS, (ii) stimulate the immune system, (iii) have anti-hypertensive and anti-cholesterolemic properties, (iv) mitigate against the effect of antibiotics on the intestinal microbiota, and (v) protect against gastrointestinal infections. However, the scientific basis for many of these claims is not well-established. Indeed, the European Food Safety Authority has denied the use of several health claims associated with probiotics, particularly those related to mitigation of diarrhea following consumption of antibiotics. Thus, there is a need for research on the mechanisms of action of probiotics. We have been mainly interested in the use of probiotics to control enteric infections. There are several possible modes of action to explain how probiotics may protect the host from enteric pathogens, including competitive exclusion and immunomodulation. We have shown that probiotics produce bioactive molecules that interfere with bacterial cell-cell communication (also called quorum sensing), and this results in a down-regulation of virulence genes that are responsible for attachment of the pathogen to the gastrointestinal epithelium. These bioactive molecules act on a variety of bacteria, including enterohemorrhagic and enterotoxigenic Escherichia coli, Salmonella, Clostridium difficile and Clostridium perfringens, and there is evidence that they can inhibit the formation of biofilms by Listeria monocytogenes. These bioactive molecules, which are peptidic in nature, can exert their effects not only in vitro but also in vivo, and we have shown that they mitigate against E. coli O157:H7 and Salmonella in mice and Salmonella and E. coli K88 infections in pigs. They can be delivered in foods such as yoghurt and maintain their activity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.25-33
• /
• 2017

This paper reports the optical design of the MR-16 lamp series with a LED second lens and an aspherical plano-convex lens suitable for a simple and rapid injection molding fabrication method. The fabrication and performance evaluation of the MR-16 lamp series, which was designed with a narrow angular distribution of luminous intensity, were conducted to replace halogen lamps with LED lamps. Four types of LED lamps were fabricated, which have angular distributions of luminous intensity of $22.4^{\circ}$, $31.1^{\circ}$, $37.3^{\circ}$, and $59.9^{\circ}$ and luminous efficiencies of 76.5 lm/W, 75.2 lm/W, 72.0 lm/W, and 77.8 lm/W, respectively, while their spreading angles with an illuminance uniformity of 81% were $3^{\circ}$, $15^{\circ}$, $22^{\circ}$, and $49^{\circ}$, respectively. After eliminating a yellow tail of the LED lamps using a diffusion sheet, the angular distributions of the luminous intensity were measured to be $20.8^{\circ}$, $31.5^{\circ}$, $37.8^{\circ}$, and $68.7^{\circ}$.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.1-26
• /
• 1993

The purpose of this study was to investigate the effect of acid etching on the surface appearance and fracture toughness of five glass ionomer cements. Five kinds of commercially available glass ionomer cements including chemical curing filling type, chemical curing lining type, chemical curing metal reinforced type, light curing tilling type and light curing lining type were used for this study. The specimens for SEM study were fabricated by treating each glass ionomer cement with either visible light curing or self curing after being inserted into a rubber mold (diameter 4mm, depth 1mm). Some of the specimens were etched with 37% phosphoric acid for 0, 15, 30, 60, go seconds, at 5 minutes, 1 hour and 1 day after mixing of powder and liquid. Unetched ones comprised the control group and the others were the experimental groups. The surface texture was examined by using scanning electron microscope at 20 kV. (S-2300, Hitachi Co., Japan). The specimens for fracture toughness were fabricated by curing of each glass ionomer cement previously inserted into a metal mold for the single edge notch specimen according to the ASTME399. They were subjected to a three-point bend test after etching for 0, 30, 60, and 90 seconds at 5 minutes-, 1 hour-and 1 day-lapse after the fabrication of the specimens. The plane strain fracture toughness ($K_{IC}$) was determined by three-point bend test which was conducted with cross-head speed of 0.5 mm/min using Instron universal testing machine (Model No. 1122) following seven days storage of the etched specimens under $37^{\circ}C$, 100% humidity condition. Following conclusions were drawn. 1. In unetched control group, crack was present, but the surface was generally smooth. 2. Deterioration of the surface appearance such as serious dissolving of gel matrix and loss of glass particles occured as the etching time was increased beyond 15 s following Immediate etching of chemical curing type of glass ionomer cements. 3. Etching after 1 h, and 1 d reduced surface damage, 15 s, and 30s etch gave rough surface appearance without loss of glass particle of chemical curing type of glass ionomer cements. 4. Light curing type glass ionomer cement was etched by acid, but there was no difference in surface appearances according to various waiting periods. 5. It was found that the value of plane stram fracture toughness of glass ionomer cements was highest in the light curing filling type as $1.79\;MNm^{-1.5}$ followed by the light curing lining type, chemical curing metal reinforced type, chemical curing filling type and chemical curing lining type. 6. The value of plane stram fracture toughness of the chemical curing lining type glass ionomer cement etched after 5 minutes was lower than those of the cement etched after 1 hour or day or unetched (P < 0.05). 7. Light curing glass ionomer cement showed Irregular fractured surface and chemical curing cement showed smooth fractured surface.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.1
• /
• pp.40-47
• /
• 1994

The objective of this research was to examine the effect of ammonium thiosulfate(ATS) on urease activity and on biological and chemical properties of flooded paddy soil especially having high organic matter content by comparing with the effect of sodium thiosulfate(STS). The results obtained are summarized as follows. 1. The hydrolysis of urea was inhibited at 3 and 5 days after treatment of thiosulfate(ATS and STS) +glucose and thiosulfate only, respectively. The inhibitory effect of ATS on urea hydrolysis was slightly lower than that of STS in glusoce-added soils, but when the glucose was not added, the effects of ATS and STS were not different significantly. 2. The soil pH and Eh was lowered by 0.3~0.5 units and 30~120 mV, respectively, when incubated flooded soil with ATS and glucose at $25^{\circ}C$. 3. Soil respiration rate in/flooded soil was increased by 10~70% with the treatment of ATS during the 20 day experimental period. 4. The contents of acetic and butyric acid in thiosulfate treatment soil was below $10{\mu}g/g$, which was lower than that($220.3{\mu}g/g$) of critical growth inhibition of rice.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.44-45
• /
• 2010

We are currently conducting studies on culturing and biocompatibility assessment of various cells such as neural stem cells and induced pluripotent stem cells(IPS cells) on carbon nanotube (CNT), on nerve regeneration electrodes, and on silicon wafers with a focus on developing nerve integrated CNT based bio devices for interfacing with living organisms, in order to develop brain-machine interfaces (BMI). In addition, we are carried out the chemical modification of carbon nanotube (mainly SWCNTs)-based bio-nanosensors by the plasma ion irradiation (plasma activation) method, and provide a characteristic evaluation of a bio-nanosensor using bovine serum albumin (BSA)/anti-BSA binding and oligonucleotide hybridization. On the other hand, the researches in the case of "novel plasma" have been widely conducted in the fields of chemistry, solid physics, and nanomaterial science. From the above-mentioned background, we are conducting basic experiments on direct irradiation of body tissues and cells using a micro-spot atmospheric pressure plasma source. The device is a coaxial structure having a tungsten wire installed inside a glass capillary, and a grounded ring electrode wrapped on the outside. The conditions of plasma generation are as follows: applied voltage: 5-9 kV, frequency: 1-3 kHz, helium (He) gas flow: 1-1.5 L/min, and plasma irradiation time: 1-300 sec. The experiment was conducted by preparing a culture medium containing mouse fibroblasts (NIH3T3) on a culture dish. A culture dish irradiated with plasma was introduced into a $CO_2$-incubator. The small animals used in the experiment involving plasma irradiation into living tissue were rat, rabbit, and pick and are deeply anesthetized with the gas anesthesia. According to the dependency of cell numbers against the plasma irradiation time, when only He gas was flowed, the growth of cells was inhibited as the floatation of cells caused by gas agitation inside the culture was promoted. On the other hand, there was no floatation of cells and healthy growth was observed when plasma was irradiated. Furthermore, in an experiment testing the effects of plasma irradiation on rats that were artificially given burn wounds, no evidence of electric shock injuries was found in the irradiated areas. In fact, the observed evidence of healing and improvements of the burn wounds suggested the presence of healing effects due to the growth factors in the tissues. Therefore, it appears that the interaction due to ion/radicalcollisions causes a substantial effect on the proliferation of growth factors such as epidermal growth factor (EGF), nerve growth factor (NGF), and transforming growth factor (TGF) that are present in the cells.

• Korean Journal of Veterinary Research
• /
• v.33 no.4
• /
• pp.623-632
• /
• 1993

This study was conducted to develop a sensitized latex-antigen for serodiagnosis of toxoplasmosis in animals. Tachyzoites of T gondii(RH-strain) harvested from mouse peritoneal cavity were purified through the filtraton of polycarbonate membrane(pore size, $3.0{{\mu}m}$, Costar Co.) and disrupted by ultrasonicator. The tachyzoite suspension was ultracentrifuged for 30 min at $60,000{\times}g(4{^{\circ}C})$ and the supernatant was used as a water-lysate antigen. Polystyrene latex particles of $0.8{{\mu}m}$ in diameter(Sigma) were used for the preparation of sensitized latex-antigen suspension. The several parameters including the preparation conditions, incubation buffer. serum dilution buffer and stability of agglutination reactions were evaluated and the results obtained were summarized as follows : 1. The antigen consisting of a water-lysate of T gondii tachyzoites was adsorbed onto polystyrene latex particles of $0.8{{\mu}m}$ in diameter by adding a latex suspension to an equal volume of diluted antigen solution and by incubating the mixture at $37{^{\circ}C}$ under different conditions. 2. The optimum incubation buffer used for the antigen sensitization was 0.1M Tris-HCl buffer(pH 8.0). 3. The optimum serum dilution buffer used for the latex agglutination test was 0.1M Tris-HCl-NaCl buffer(pH 7.4) containing 300 mM NaCl. But 0.1M Tris-HCl-NaCl buffer(pH 7.4) containing 300-600 mM NaCl, 0.5% BSA and 0.01% Tween-20 improved the agglutination pattems and cleared the background of microplate well without the effects on L.A titer. 4. The time required for antigen sensitization was 40 and 60 min in incubation buffer(pH 8.0) at $37{^{\circ}C}$. But the optimun time for antigen sensitization was min at $37{^{\circ}C}$. 5. The optimun quantity of antigen absorbed on latex particles for proper agglutination was the range of 20 to $32{\mu}g$ of latex particles. 6. The optimun concentration of the latex-antigen suspension for the proper agglutination reaction was determined as 0.2%(w/v). 7. The specificity, rapidity and simplicity of the latex-particle agglutination test suggested that it might be adaptable to large scale serum screening.

• Korean Journal of Materials Research
• /
• v.7 no.3
• /
• pp.218-223
• /
• 1997

At the aim of finding a Fehased amorphous alloy with a wide supercooled liquid region (${\Delta}T_{x}=T_{x}-T_{g}$) before crystallization, the changes in glass transition temperatudfI$T_{g}$ and crystallization temperature ($T_{x}$) by the dissolution of additional M elements were examined for the $Fe_{80}P_{10}C_{6}B_{4}$(x~6at%. M= transition metals) amorphous alloys. The ${\Delta}T_{x}$ value is 27K for the Fe,,,P,,,C,,R, alloy and increases to 40K for the addition of M=4at%Hf, 4at%Ta or 4at%Mo. The increase in ${\Delta}T_{x}$ is due to the increase of $T_{x}$ exceeding the degree in the increase in $T_{g}$. The $T_{g}$ and $T_{x}$ increase with decreasing electron concentration (e/a) from about 7 38 to 7.05. The decrease of e/a also implies the increase in the attractive bonding state between the M elements and other constitutent elements. It is therefore said that $T_{g}$ and $T_{x}$ increase kith increasing attractive bonding force.

• Korean Journal of Food Science and Technology
• /
• v.48 no.5
• /
• pp.486-491
• /
• 2016

Efficacy of dielectric barrier discharge-cold plasma treatment (DBD-CPT) for microbial decontamination of onion powder was evaluated. Onion powder, inoculated with Escherichia coli O157:H7, Salmonella Enteritidis, or Listeria monocytogenes, was treated with helium DBD-CPT. DBD-CPT (9 kV, 20 min) inhibited E. coli O157:H7, S. Enteritidis, and L. monocytogenes by $1.4{\pm}0.5$, $2.3{\pm}0.3$, and $1.2{\pm}0.0log\;CFU/cm^2$, respectively. The inactivation levels of E. coli O157:H7, S. Enteritidis and L. monocytogenes increased by $2.2{\pm}0.1$, $2.5{\pm}0.1$ and $1.9{\pm}0.3log\;CFU/cm^2$, respectively, as water activity increased from 0.4 to 0.8, and increased by $2.3{\pm}0.4$, $2.1{\pm}0.1$ and $1.6{\pm}0.1log\;CFU/cm^2$, respectively, as the particle size increased from 0.3 to $1.0cm^2$. Neither the ascorbic acid and quercetin concentrations nor the color of onion powder was changed by DBD-CPT (p>0.05). These results demonstrate the potential for application of DBD-CPT in improving microbiological safety of onion powder while preserving the physicochemical properties.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.1
• /
• pp.152-159
• /
• 2015

The purpose of this study was to analyze how consumers make links between convenience meat products and self-relevant consequences and value. Surveys on convenience meat product consumption patterns and hard laddering based on means-end chain theory were conducted from April 21 to April 25, 2014 and targeted 200 consumers in the US. The most preferred cooking method of convenience meat product was roast (25.9%) and the most common information medium was suggestions by friends and parents (37.1%). The main as well as desired places of purchasing were both the supermarket (33.6% and 27.3%, respectively). The most preferred promotion method was free sample events (38.5%). From analyzing means-end chains of convenience meat products, the most dominant value chain was 'taste (A)'-'good taste (C)'-'feel good (V)'. These results show that consumption of convenience meat products will increase when consumer expectations of taste and satisfaction are met. Further, results of the value measurement provide information on consumer satisfaction and needs and can be applied to set marketing strategies for Korean style convenience meat products.