• 청정기술
• /
• 제18권2호
• /
• pp.177-182
• /
• 2012

Tri-block copolymer를 유연 템플레이트로 사용한 수열합성법에 의해 메조다공성 아나타제상 $TiO_2$ 나노입자를 합성하였다. 합성된 $TiO_2$ 재료는 $230m^2/g$의 매우 큰 표면적을 가졌으며 6.8 nm의 기공크기와 0.404 mL/g의 기공부피를 보였다. 리튬이 온전지 음극재로서의 가능성을 확인하기 위해 코인셀 테스트를 실시하였는데 0.1 C에서 240 mAh/g의 방전 용량을 얻었으며 이는 LTO ($Li_4Ti_5O_{12}$)의 이론 방전 용량인 175 mAh/g 보다 훨씬 큰 값이었다. 비록 C-rate가 증가함에 따라 용량이 감소하는 모습을 보였으나 메조다공성 $TiO_2$ 재료는 리튬 이온이 침투할 수 있는 큰 표면적을 제공할 수 있다는 면에서 여전히 리튬 이온전지의 음극재로서 가능성이 있다. 추가적으로 질소를 도핑하여 $TiO_2$ framework 내의 전자 이동을 향상시킴으로써 C-rate 증가에 따른 용량 감소를 일부 제어할 수 있음을 확인하였다.

• 대한화학회지
• /
• 제54권6호
• /
• pp.766-770
• /
• 2010

본 연구는 전이금속이 치환된 묽은 자성 반도체의 자기적 특성을 연구하였다. 울츠자이트(wurtzite) 구조를 가지는 화합물은 졸-겔(sol-gel)법을 이용하여 합성하였다. 열역학적 특성과 자기적 특성을 가진 $Zn_{1-x}Co_xO$은 단일상으로 나타났으며, 농도에 따라 다른 특성을 보여주었다. 묽은 자성 반도체의 특성을 조사하기 위해 X-ray diffraction (XRD), scanning electronic microscope (SEM) 및 vibrating sample magnetometer (VSM)을 사용하였다. 구조 분석을 통해 단일상이 확인된 시료에서는 모두 강자성 특성이 발견되었고, 전이금속 이온의 농도를 5%이상 치환이 되면 강자성이 감소하는 현상이 나타났다.

• 한국세라믹학회지
• /
• 제44권7호
• /
• pp.393-402
• /
• 2007

Polyaluminocarbosilane was synthesized by direct reaction of polydimethylsilane with aluminum(III)-acetylacetonate in the presence of zeolite catalyst. A fraction of higher molecular weight polycarbosilane was formed due to the binding of aluminium acetylacetonate radicals with the polycarbosilane backbone. Small amount of Si-O-Si bond was observed in the as-prepared polyaluminocarbosilane as the result. Polyaluminocarbosilane fiber was obtained through a melt spinning and was pyrolyzed and sintered into SiC fiber from $1200{\sim}2000^{\circ}C$ under a controlled atmosphere. The nucleation and growth of ${\beta}-SiC$ grains between $1400{\sim}1600^{\circ}C$ are accompanied with nano pores formation and residual carbon generation. Above $1800^{\circ}C$, SiC fiber could be sintered to give a fully crystallized ${\beta}-SiC$ with some ${\alpha}-SiC$.

• 한국전기전자재료학회논문지
• /
• 제32권2호
• /
• pp.110-115
• /
• 2019

$Pb(Sb_{0.5}Nb_{0.5})_x(Zr_{0.51}Ti_{0.49})_{1-x}O_3$ (abbreviation: PSN-PZT) ceramics were synthesized, using conventional bulk ceramic processing technology, with various PSN doping contents. The maximum density of PSN-PZT was 97% of the theoretical density in the samples sintered at $1,250^{\circ}C$. The maximum values of the piezoelectric properties achieved using the conventional processes were: $k_p$ of 0.625, $d_{33}$ of 531 pC/N, and $g_{33}$ of $33mV{\cdot}m/N$. Finally, we fabricated a piezo-speaker with the optimized PSN-PZT ceramics. The SPL of the speaker was measured at a distance of 1 m, with a driving voltage of $40V_{rms}$ in the frequency range of ~300 Hz to 9 kHz. The measured $SPL_{max}$ was at a very high level (95 dB), which was superior in quality in comparison with those of other commercial products.

• 한국재료학회지
• /
• 제19권2호
• /
• pp.61-67
• /
• 2009

Electrolessly deposited Co (Re,P) was investigated as a possible capping layer for Cu wires. 50 nm Co (Re,P) films were deposited on Cu/Ti-coated silicon wafers which acted as a catalytic seed and an adhesion layer, respectively. To obtain the optimized bath composition, electroless deposition was studied through an electrochemical approach via a linear sweep voltammetry analysis. The results of using this method showed that the best deposition conditions were a $CoSO_4$ concentration of 0.082 mol/l, a solution pH of 9, a $KReO_4$ concentration of 0.0003 mol/l and sodium hypophosphite concentration of 0.1 mol/L at $80^{\circ}C$. The thermal stability of the Co (Re,P) layer as a barrier preventing Cu was evaluated using Auger electron spectroscopy and a Scanning calorimeter. The measurement results showed that Re impurities stabilized the h.c.p. phase up to $550^{\circ}C$ and that the Co (Re,P) film efficiently blocked Cu diffusion under an annealing temperature of $400^{\circ}C$ for 1hr. The good barrier properties that were observed can be explained by the nano-sized grains along with the blocking effect of the impurities at the fast diffusion path of the grain boundaries. The transformation temperature from the amorphous to crystal structure is increased by doping the Re.

• 공업화학
• /
• 제24권6호
• /
• pp.611-615
• /
• 2013

본 연구에서는 바나듐 산화물($VO_2$)과 텅스텐이 도핑된 바나듐 산화물(W-$VO_2$) 분말을 바나듐 산화물($V_2O_5$)과 옥살산수화물로부터 수열합성과 하소공정을 통하여 성공적으로 제조하였다. 시료들의 결정구조와 열변색 특성들은 FE-SEM, XRD, XPS, DSC 및 UV-Vis-NIR 분광기를 이용하여 분석하였다. W-$VO_2$ 시료에 W의 도핑량을 증가시키면, W-$VO_2$ 시료의 상전이 온도가 $70^{\circ}C$에서 $42^{\circ}C$로 낮아지는 경향이 있었다. 또한, W-$VO_2$ 시료를 상전이 온도 이상으로 가열시키면 UV-Vis-NIR 곡선이 가시광 영역에서는 변하지 않고 NIR 영역에서는 낮은 투과도 방향으로 이동하는 경향이 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.386-386
• /
• 2012

For white light emitting diode (LED) applications, it has been reported that Y3Al5O12:Ce3+ (YAG:Ce) in nano-sized phosphor performs better than it does in micro-sized particles. This is because nano-sized YAG:Ce can reduce internal light scattering when coated onto a blue LED surface. Recently, there have been many reports on the synthesis of nano-sized YAG particles using bottom-up method, such as co-precipitation method, sol-gel process, hydrothermal method, solvothermal method, and glycothermal method. However, there has been no report using top-down method. Top-down method has advantages than bottom-up method, such as large scale production and easy control of doping concentration and particle size. Therefore, in this study, nano-sized YAG:Ce phosphors were synthesized by a high energy beads milling process with varying beads size, milling time and milling steps. The beads milling process was performed by Laboratory Mill MINICER with ZrO2 beads. The phase identity and morphology of nano-sized YAG:Ce were characterized by X-ray powder diffraction (XRD) and field-emission scanning electron microscopy (FESEM), respectively. By controlling beads size, milling time and milling steps, we synthesized a size-tunable and uniform nano-sized YAG:Ce phosphors which average diameters were 100, 85 and 40 nm, respectively. After milling, there was no impurity and all of the peaks were in good agreement with YAG (JCPDS No. 33-0040). Luminescence and quantum efficiency (QE) of nano-sized YAG:Ce phosphors were measured by fluorescence spectrometer and QE measuring instrument, respectively. The synthesized YAG:Ce absorbed light efficiently in the visible region of 400-500 nm, and showed single broadband emission peaked at 550 nm with 50% of QE. As a result, by considering above results, high energy beads milling process could be a facile and reproducible synthesis method for nano-sized YAG:Ce phosphors.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 하계학술연구발표회 및 한.일 공동심포지엄
• /
• pp.220-221
• /
• 2003

Equiatomic FePt and CoPt alloy thin films have received considerable attention as possible magnetic and magneto-optic recording because of their high magnetic anisotropy energy and high coercivity. The high coercivity in these thin films is due to the presence of finely dispersed ordered FePt phase mixed with disordered FePt phase. However, a high temperature treatment, either substrate heating during deposition or post annealing, is needed to obtain the ordered L1$\_$0/ phase with high value of magneto crystalline anisotropy. Recent microstructural studies on these films suggest that the average grain size ranges from 10-50 nm and the grains are magnetically coupled between each other. On the other hand, the ultrahigh-density magnetic recording media with low media noise imposes the need of a material, which consists of magnetically isolated grains with size below 10 nm. The magnetic grain isolation can be controlled by the amount of additional non-magnetic element in the system which determines the interparticle separation and therefore the interparticle interactions. Recently, much research work has been done on various non-magnetic matrices. Preliminary studies showed that the samples prepared in B$_2$O$_3$ and Carbon matrices have shown strong perpendicular anisotropy and fine grain size down to 4nm, which suggest these nanocomposite films are very promising and may lead to the realization of a magnetic medium capable of recording densities beyond 1 Tb/in$^2$. So, in this work, the effect of Carbon doping on the magnetic properties of FePt nanoparticles were investigated.

• Journal of Radiation Protection and Research
• /
• 제28권2호
• /
• pp.87-95
• /
• 2003

반도체 검출기의 p+ 층의 도핑 농도, 열처리에 의한 불순물 재분포와 절단면에서의 guard ring 효과를 전산모사하여 최적의 구조와 공전을 설계하고, MCNP코드로 방사선 반응 특성을 분석하였다. 검출기는 반도체 집적회로 공정에서 설계된 공정변수를 적용하여 격자 방향 <100>, $400{\Omega}cm$, n형, Floating-Zone 실리콘 기판에서 제작되었다. 제작된 검출기의 누설전류 밀도는 $0.7nA/cm^2/100{\mu}m$로서 전기적 특성이 우수한 것으로 나타났으며, Cs-137 감마 선원에 의한 $5mR/h{\sim}25R/h$의 조사선량률 범위에서 방사선 반응 특성은 양호한 선형성을 보였다. 본 연구에서 제안된 공정으로 제작된 PIN 반도체 검출기는 개인선량 측정에 사용될 수 있을 것이다.

• 전기화학회지
• /
• 제25권3호
• /
• pp.105-112
• /
• 2022

전고체전지의 상용화를 위해서는 상온에서 작동이 가능한 고체전해질 개발이 필수적이며 이온전도도가 높은 물질을 채택하여 전고체전지를 제조해야 한다. 따라서, 기존의 옥사이드 계열의 고체의 이온전도도를 높이기 위하여 이종원소가 도핑된 Li₇La₃Zr₂O₁₂ (LLZO)를 필러소재(Al, Nb-LLZO)로 사용하였으며, 상온에서 작동이 가능하도록 Poly(ethylene oxide)/Poly(propylene carbonate) (PEO/PPC) 기반의 가넷형 무기계 고체고분자 전해질을 제조하였다. 이원금속 원소를 도핑한 가넷형 무기계 필러와 PEO/PPC (1:1 비율로 섞인) 고분자를 1:2.4의 비율로 균일하게 교반하여 전해질을 합성해 상온과 60 ℃에서 전고체 전지의 전기학적 성능을 분석하였다. 제조한 복합 전해질은 이원금속의 도핑으로 인하여 이온전도도가 향상되었으며, PEO 단독으로 사용하는 전해질보다 PPC를 1:1로 첨가하였을 때 이온전도도 향상을 도와 60 ℃ 뿐만 아니라 상온에서 전고체 전지의 용량과 용량 유지율이 개선되었음을 확인하였다.