• Korean Journal of Materials Research
• /
• v.6 no.5
• /
• pp.515-523
• /
• 1996

세라믹 전구체로서 PCS와 PMS 두 종류의 실린콘 고분자를 합성하여 7, 15, 33 wt.%의 Mo분말, Mo(CO)6 금속화합물과 혼합한 뒤 130$0^{\circ}C$이상 가열하면 탄화물과 규화물의 다양한 세라믹복합재로 전이되었다. 특히 PMS용액에 7, 15 wt.% Mo분말을 분산하여 초음파 처리하면 열분해 수율이 60%까지 개선되고 전도성 소재인 SiC/MoSi2 복합조성의 세라믹스가 합성되었다. 그러나 풍부한 유기 반응기를 가진 PCS와 카보닐기가 탄소공급원으로 작용하는 Mo(CO)6를 반응물로 사용하였을 때는 SiC와 Mo2C와 같은 탄화물과 미향의 MoSi2 그리고 미확인상을 포함한 세라믹 복합상들이 얻어졌다.

• Asian Journal of Turfgrass Science
• /
• v.24 no.2
• /
• pp.138-144
• /
• 2010

This study was conducted to investigate the effect of Lactobacillus sp. and Saccharomyces sp. on turf quality, shoot and root growth of creeping betgrass in golf course by measuring turf color index, chlorophyll content, dry weight of shoot and root, T/R ratio and root length. Fertilizer treatment was designed as follows; nonfertilizer (NF), control (CF; compound fertilizer), microorganism medium(MO; CF+MO)), microorganism medium contained Fe(MO-Fe; CF+MO-Fe) and microorganisum medium contained S (MO-S; CF+MO-S). Soil properties investigated after experiment was scarcely affected by applied fertilizers in root zone of creeping bentgrass. The turf color index and chlorophyll index of MO, MO-Fe, MO-S treatment were higher than those of NF, and similar to those of CF. The turfgrass root in MO and MO-Fe treatment was longer than others. The dry weight of shoot in MO and MO-S was higher than CF and that of root in MO and MO-Fe, and dry weight of MO was increased than that of NF and CF, by 26% and 6%, respectively. AS compared with NF, T/R ratio of CF, MO, MO-Fe and MO-S was increased, and MO and MO-Fe was similar to CF, MO-S higher. Nutrient content in CF, MO, MO-Fe and MO-S was contained more than in NF, and it was higher in shoot. These was suggested that application of MO induced the development of quality and growth of creeping bentgrass by assisting root growth and nutrients uptake.

• Tribology and Lubricants
• /
• v.10 no.4
• /
• pp.43-50
• /
• 1994

In order to elucidate the effects of co-existing additives (S$_{8}$, TBP: Tri butyl phosphate, ZnDTP: Zinc-dialkyl dithiophosphate) and the role of reacted surface film on the friction behavior of MoDTP (molybdenum dialkyl dithiophosphate), a friction experiment using a dual circular pipe edge surface type friction tester and XPS (X-ray photoelectronic spectrum) surface analysis were conducted. Friction reduction with MoDTP lubricant was proved to be greatly influenced by co-existing additive species. It was dependent on the properties of the film formed through the reaction between the additive and the surface. Phosphate film reduced the friction coefficient of MoDTP through suppression of diffusion of Mo compounds towards the metal substrate. On the other hand, sulfate film, which is inherently rich in lattice defects, did not lead to any appreciable friction reduction with MoDTP since the diffusion of the Mo compound towards the metal substrate was not effectively suppressed. With ZnDTP additive, the sulfide film formed through decomposition greatly influenced the lubricating performance of MoDTP. As such, properties of surface films formed from additives were proved to yield significant influence on the lubrication performance of MoDTP.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.101-104
• /
• 2008

Too high stress of the bottom Mo layer of the gate line is thought to be the main reason for H-line mura. H-Line mura is eliminated effectively by changing the gate line metal structure from Mo/AlNd/Mo to AlNd/Mo. The new structure does not influence the panel's electrical characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.6
• /
• pp.491-494
• /
• 2004

[ $H_2$ ] uptake into $Pt/MoO_{3}$ was enhanced with an increased calcination temperature. Selective CO pulse chemisorption demonstrated that free Pt surface area was decreased as calcination temperature was increased. Characteristic techniques were dedicated to elucidate the closer contact at adlineation sites between Pt and $MoO_3$ substrates. Calcination resulted in supplying the hydrogen access into more $MoO_3$ particles and controlling the kinetics of hydrogen uptake.

• Journal of Technologic Dentistry
• /
• v.36 no.3
• /
• pp.149-158
• /
• 2014

Purpose: Dental casting Co-Cr-Mo based alloys of five kinds of ingot type and two kinds of shot type were analyzed the melting processes with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer. Methods: When Co-Cr-Mo based alloys were put about 30g/charge in the ceramic crucible of high frequency induction centrifugal casting machine and heat, Infrared thermal image analyzer and IR thermometer indicated these alloys in the crucible were set and operated. Results: The melting temperatures of alloys measuring infrared thermal image analyzer were deviated ${\pm}10^{\circ}C$ compared to those of manufacturing company. On the other hand, the melting time of alloys were differently appeared with the shape of alloys(ingot and shot type). Conclusion: The melting temperatures of dental Co-Cr-Mo based alloys were measured the degree of $1,360{\sim}1410^{\circ}C$ and the heating time with the alloys of ingot and shot type were deviated ${\pm}10sec$.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2009.10a
• /
• pp.576-578
• /
• 2009

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.05a
• /
• pp.175-175
• /
• 2001

• Proceedings of the Korean Magnestics Society Conference
• /
• 1993.03a
• /
• pp.86-87
• /
• 1993

• Proceedings of the Korean Magnestics Society Conference
• /
• 1995.05a
• /
• pp.52-53
• /
• 1995