• Journal of Magnetics
• /
• 제3권3호
• /
• pp.69-73
• /
• 1998

A drum type magnetic separator was designed and optimized by computer simulation. The separator consisted of rotating outer shell of drum, magnetic flux generator drum which was assembled with numbers of disk type magnet holders, and drum axis around which the magnet holders were fixed. NdFeB magnet blocks were inserted into the disks, and the disks were assembled layer by layer along the drum axis. Magnetic circuits of the separator were simulated on the basis of highest magnetic strength, least cost, and high yield of separation by using a Vector Field S/W employing the Opera-2D program. The separator proved a separation yield of 95% in removing fine iron-base particles, and installed at Hot Rolling Mill of Pohang Iron & Steel Co. In Korea.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.177-178
• /
• 2007

WiBro system provides reliable broadband communication services for mobile and portable subcribers. It allows interference-free reception under the conditions of multipath propagation and transmission errors. Thus, powerful channel-error correction ability Is required. CC/CTC Decoder which Is mandatory for WiBro system needs lots of computations for real-time operation. So, it is desired to design a CC/CTC Decoder having highly optimized hardware scheme for low latency operation under high data rates. This paper proposes an efficient CC/CTC Decoder structure for high data rate WiBro system. Particularly, the proposed CTC Decoder architecture reduces decoding delay by applying pipelining and multiple decoding blocks. Simulation results show that reduction of about 80% of processing time is enabled with the proposed CC/CTC Decoder despite of increase in are.

• Bulletin of the Korean Chemical Society
• /
• 제28권4호
• /
• pp.529-532
• /
• 2007

Combined temperature programmed reaction (TPR) and infrared (IR) spectroscopic studies for Fischer- Tropsch reaction have been performed over Ru/SiO2 and Ru-Ag/SiO2 supported catalysts. Reaction of linearly absorbed CO with hydrogen starts at 375 K over Ru/SiO2 catalyst and reaches maximum at 420 K accompanied with an intensity decrease of linear CO absorption. The reaction with bridged absorbed CO peaks around 510-535 K. Addition of Ag yields mixed Ru-Ag bimetallic sites while it suppresses the formation of bridged bonded CO. Formation of methane on this modified surface occurs at 390 K and reaches maximum at 444 K. Suppression of hydrogen on the Ag-doped surface also occurs resulting in the formation of unsaturated hydrocarbons and of CHx intermediates not observed with Ru/SiO2 catalyst. Such intermediates are believed to be the building blocks of higher hydrocarbons during the Fischer-Tropsch synthesis. Linearly absorbed CO is found to be more reactive as compared to bridged CO. The Ag-modified surface also produces CO2 and carbon. On this surface, hydrogenation of CO begins at 390 K and reaches maximum at 494 K. The high temperature for hydrogenation of absorbed CO and C over Ru-Ag/SiO2 catalyst as compared to Ru/SiO2 catalyst is due to the formation of Ru-Ag bimetallic surfaces impeding hydrogen adsorption.

• Molecules and Cells
• /
• 제44권9호
• /
• pp.688-695
• /
• 2021

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic has become a global health concern. Various SARS-CoV-2 vaccines have been developed and are being used for vaccination worldwide. However, no therapeutic agents against coronavirus disease 2019 (COVID-19) have been developed so far; therefore, new therapeutic agents are urgently needed. In the present study, we evaluated several hepatitis C virus direct-acting antivirals as potential candidates for drug repurposing against COVID-19. Theses include asunaprevir (a protease inhibitor), daclatasvir (an NS5A inhibitor), and sofosbuvir (an RNA polymerase inhibitor). We found that asunaprevir, but not sofosbuvir and daclatasvir, markedly inhibited SARS-CoV-2-induced cytopathic effects in Vero E6 cells. Both RNA and protein levels of SARS-CoV-2 were significantly decreased by treatment with asunaprevir. Moreover, asunaprevir profoundly decreased virion release from SARS-CoV-2-infected cells. A pseudoparticle entry assay revealed that asunaprevir blocked SARS-CoV-2 infection at the binding step of the viral life cycle. Furthermore, asunaprevir inhibited SARS-CoV-2 propagation in human lung Calu-3 cells. Collectively, we found that asunaprevir displays broad-spectrum antiviral activity and therefore might be worth developing as a new drug repurposing candidate for COVID-19.

• 한국컴퓨터정보학회논문지
• /
• 제18권4호
• /
• pp.35-43
• /
• 2013

텍스처 이미지가 다양한 산업 애플리케이션 분야에 널리 사용됨에 따라, 이러한 이미지들의 저작권 보호는 중요한 이슈가 되어왔다. 이러한 이유로, 본 논문은 이미지에 내재한 텍스처 특성을 이용한 칼라 텍스처 이미지 워터마킹 알고리즘을 제안한다. 제안한 알고리즘은 퍼지 클러스터링을 위한 입력으로써 그레이 레벨 동시발생 행렬의 에너지와 동질성 특징을 사용하여 워터마크를 삽입하기 위한 적당한 블록들을 선택한다. 워터마크를 삽입하기 위해 먼저 선택된 블록들에 이산 웨이블릿 변환을 수행하고, 이산 웨이블릿 변환의 서버밴드들의 하나를 선택한다. 그런후에 이 워터마크를 중간 대역의 이산 코사인 변환 계수에 삽입한다. 또한, 본 논문은 워터마크 삽입 후 비인지성과 다양한 형태의 워커마킹 공격에 대해 강인성이 뛰어난 이득 계수들과 이산 웨이블릿 변환의 서버밴드들의 효과를 탐색한다. 모의실험 결과, 제안한 알고리즘은 이득 계수가 42이고 HH 밴드에 워터마크를 삽입하였을 때 높은 PSNR 값 (47.66 dB to 48.04 dB) 및 낮은 M-SVD 값 (8.84 to 15.6)을 얻었다. 또한 제안한 알고리즘은 노이즈 첨가, 필터링, 잘라내기 및 JPEG 압축과 같은 다양한 이미지 처리 공격에서도 높은 상관 값 (0.7193 to 1)을 보였다.

• Journal of Periodontal and Implant Science
• /
• 제43권1호
• /
• pp.30-36
• /
• 2013

Purpose: Implant stability at the time of surgery is crucial for the long-term success of dental implants. Primary stability is considered of paramount importance to achieve osseointegration. The purpose of the present study was to investigate the correlation between the insertion torque and primary stability of dental implants using artificial bone blocks with different bone densities and compositions to mimic different circumstances that are encountered in routine daily clinical settings. Methods: In order to validate the objectives, various sized holes were made in bone blocks with different bone densities (#10, #20, #30, #40, and #50) using a surgical drill and insertion torque together with implant stability quotient (ISQ) values that were measured using the Osstell Mentor. The experimental groups under evaluation were subdivided into 5 subgroups according to the circumstances. Results: In group 1, the mean insertion torque and ISQ values increased as the density of the bone blocks increased. For group 2, the mean insertion torque values decreased as the final drill size expanded, but this was not the case for the ISQ values. The mean insertion torque values in group 3 increased with the thickness of the cortical bone, and the same was true for the ISQ values. For group 4, the mean insertion torque values increased as the cancellous bone density increased, but the correlation with the ISQ values was weak. Finally, in group 5, the mean insertion torque decreased as the final drill size increased, but the correlation with the ISQ value was weak. Conclusions: Within the limitations of the study, it was concluded that primary stability does not simply depend on the insertion torque, but also on the bone quality.

• 감성과학
• /
• 제25권2호
• /
• pp.11-22
• /
• 2022

사회적인 존재로서 우리는 다른 사람의 행위를 빠르고 정확히 이해할 필요가 있다. 행위 이해는 여러 수준에서 일어난다. 무심코 타인의 의도를 알아챌 때가 있는가 하면, 그들의 목적을 추론하기 위해 노력해야만 하는 경우도 있다. 결합 사이먼 효과는 과제를 분업하는 한 쌍의 참가자가 의도치 않게 동료의 행위를 표상할 수 있음을 실험적으로 증명한다. 이 효과는 거의 자동적으로 발생한다고 알려졌지만, 인지부하의 영향을 받지 않을 만큼 자동적인지는 확인되지 않았다. 이에 본 연구는 참가자에게 작업기억 부하가 있거나 없는 상태에서 결합 사이먼 과제를 수행하게 하였다. 이중과제 구획에서 저부하 집단의 참가자들은 한 개의 숫자를 작업기억에 유지한 채로 사이먼 과제를 분업하였고, 고부하 집단의 참가자들은 다섯 개의 숫자를 유지한 채로 사이먼 과제를 분업하였다. 작업기억 부하의 효과를 분석하기 위해 이중과제 구획과 단일과제 구획의 집단별 사이먼 효과를 비교하였다. 반응시간을 분석한 결과, 저부하 집단은 이중과제와 단일과제 구획에서 모두 사이먼 효과를 보였지만, 고부하 집단은 어느 과제 구획에서도 사이먼 효과를 보이지 않았다. 이 결과는 결합 사이먼 효과가 인지 자원에 의존한다는 면에서 자동적인 현상을 아님을 의미한다. 즉, 분업 참여자는 인지적 자원이 가용한 경우에만 동료의 행위를 과제 표상에 반영하는 것으로 보인다.

• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3574-3580
• /
• 2009

본 논문에서는 IEC 61131-3 국제표준언어에 근거한 PLC 프로그래밍 개발환경을 지원해 주는 임베디드 모션 제어기를 개발하였다. 이 모션제어기에는 모션시스템 개발자가 PC 개발환경은 물론, PLC 개발환경에서도 손쉽게 모션제어 프로그래밍이 가능하도록 IEC 61131-3 개발 도구인 CoDeSys가 탑재되었으며, 직선 및 원호보간 제어와 같은 다양한 모션제어 함수들이 PLCopen 표준에 부합되는 모션 펑션블록으로 구현되었다. 또한 실시간 운영체제하에서 이더넷 기반 원격제어 및 모션 프로그래머를 위한 모션 시뮬레이터가 구현되었다.

• 한국산림과학회지
• /
• 제4권1호
• /
• pp.14-16
• /
• 1965

(1) The sterilizing effects of NaF, $CuSO_4$, $CuCO_3$, $HgCl_2$, $ZnSO_4$, and coaltar creosote on the mycelial growth of Irpex consors Berk. Polystictus versicolor L. Fr, Polystictus versicalor L. var. nigricans, and Schizophyllum commune Fr. Were studied. (2) The range of minimum density of the fungicides to check the growth of four fungi mentioned above was as follows; NaF 0.15~0.25(%) $CuSO_4$ 0.20~0.35(%) $CuCO_3$ 0.40~0.50(%) $HgCl_2$ 0.05(%) $ZnSO_4$ 0.40~0.45(%) Creosote 0.10~0.15(%) Of the fungicides tested, $HgCl_2$ was most effective in fungicidal effects, and Creosote, NaF, $CuSO_4$, $ZnSO_4$, $CuCO_3$, followed. The order of resistance of the fungi to the fungicides was as follows: S. Commune Fr. P. Versicalor L. var.nigricans I. Consors Berk P. Versicalor L. Fr. (3) The fungicides were added to the pepton-agor culture medium at the concentration between 0.01 and 0.5%, and the medium was filled into 9cm petridshes. Two square millimeter agar blocks prepared separately from the fungi Contained agar were placed in the middle of the Petri-dishes, in cubated six days at $26^{\circ}C$. Diameter of biggest Colonies were measured.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2008년도 특별논문집
• /
• pp.118-125
• /
• 2008

The deck plates of ship block is made of thin plates in their construction. A main reason of using thin plates is that deck plates don't need to support large structural loads. Therefore, out-of-plane deformations between stiffeners are frequent in deck blocks. Because these are got right by correction heating, they continuously causes quality problems in the final dock-building process. According to preceding research, the lifting process by cranes would offset the effect of correction heating. This study finds out the remained efficiency of correction heating when tensional loads are added by a lifting to corrected parts. We used inherent strains in calculating the efficiency, and established the methodology where the positions for callings are. For getting more accurate positions, besides the structural lifting analysis, welding deformation analysis with upper block and measured data from a serial ship are also referenced.