• Journal of Magnetics
• /
• 제6권3호
• /
• pp.94-100
• /
• 2001

Fe-Co-Ni particles with an average size of 45 and 135 nm are characterized in terms of magnetic phase transformation and magnetic properties at room temperature. BCC structure of Fe-Co-Ni spherical particles can be synthesized from Fe-Co-Ni-Al-Cu precursor films by heating at 600-80$0^{\circ}C$ for the phase separation of Fe-Co rich Fe-Co-Ni particles, followed by a post heating at $600^{\circ}C$ for 5 hours. The average size of nanoparticles was directly determined by the thickness of precursor films. Exchange interactive hysteresis was observed for the nano-composite (Fe-Co-Ni)+(Fe-Ni-Al) films resulting from the short exchange interface between ferromagnetic Fe-Co-Ni particles surrounded by almost papramagnetic Ni-Al-Fe matrix. Arraying the isolated Fe-Co-Ni nano-particles in a random arrangement on $Al_2O_3$substrate the particle assembly showed a behavior of dipole interactive ferromagnetic clusters depending on their volume and inter-particle distance.

• 한국대기환경학회지
• /
• 제21권6호
• /
• pp.639-647
• /
• 2005

A single particle analytical technique, named low-Z particle electron probe X-ray microanalysis (EPMA), was applied to characterize samples collected at a subway station and ambient samples in Seoul. According to their chemical composition, many distinctive particle types were identified. For samples collected at the subway station platform, the major chemical species are carbon-rich, organic, aluminosilicates (AlSi), AlSi/C, AlSi/$CaCO_{3},\;CaCO_{3},\;SiO_{2},\;and\;Fe_{2}O_{3}$. For outdoor samples, carbon-rich, organic, AlSi, $CaCO_{3},\;SiO_{2},\;NaNO_{3},\;(Na,Mg)NO_{3},\;Na(CO_{3},NO_{3},SO_{4}),\;and\;(NH_{4})_2SO_4$, are abundantly encountered. Samples collected at the subway station show very high contents of $Fe_{2}O_{3}$, both in coarse and fine fractions, which come from brake block, subway train wheel, electric contact materials, etc. It is demonstrated that the single-particle characterization using this low-Z particle EPMA technique provided detailed information on various types of chemical species in indoor and outdoor samples.

• Korean Chemical Engineering Research
• /
• 제45권5호
• /
• pp.506-514
• /
• 2007

합성가스 연소 매체순환식 가스연소기 적용을 위한 최적 산소공여입자를 선정하기 위해 네 가지 산소공여입자(NiO/bentonite, $NiO/LaAl_{11}O_{18}$, $Co_xO_y/CoAl_2O_4$, $NiO/NiAl_2O_4$)에 대해 환원반응기체로 모사 합성가스($H_2,\;CO2$, CO 각각 30, 10, 60%)를 사용하여 열중량 분석기(TGA)에서 환원반응특성 및 탄소침적특성을 측정 및 해석하였다. 환원반응온도가 증가함에 따라 최대전환율, 산소전달능력이 증가하였고 산소전달속도 측면에서 $900^{\circ}C$가 합성가스 연소반응에 적합한 조건으로 나타났으며 높은 환원반응온도(${\geq}800^{\circ}C$)에서는 네 가지 입자 모두에 대해 탄소침적현상이 나타나지 않았다. 네 가지 산소공여입자 중 NiO 계 산소공여입자가 CoO 계 산소공여입자에 비해 반응성이 높게 나타났으며 NiO/bentonite 입자가 산소전달속도, 탄소침적도 면에서 가장 좋은 반응성을 나타내었다. NiO/bentonite 입자에 포함된 금속산화물의 함량이 증가함에 따라 산소전달능력과 산소전달속도가 증가하는 것으로 나타나 금속산화물의 함량이 높은 산소공여입자가 매체순환식 가스연소기의 안정적인 조업에 유리한 것으로 나타났다.

• 한국수소및신에너지학회논문집
• /
• 제21권5호
• /
• pp.390-397
• /
• 2010

0.5wt% Ru/$\alpha-Al_2O_3$ catalysts are prepared by deposition-precipitation method for the preferential CO oxidation In order to investigate the effect of pH on the Ru dispersion and particle size, the pH of precursor solution is adjusted to between 5.5 and 9.5. 0.5wt% Ru/$\alpha-Al_2O_3$ catalyst prepared at the pH of 6.5 has high Ru dispersion of 17.9% and small particle size of 7.7nm. In addition, 0.5wt% Ru/$\alpha-Al_2O_3$ catalyst prepared at the pH 6.5 is easily reduced at low temperatures below $150^{\circ}C$ due to high dispersion of $RuO_2$ particle and shows high CO conversion over 90% in the wide temperature range between $100^{\circ}C$ and $160^{\circ}C$. Moreover, the deposition-precipitation is a feasible method to improve the Ru dispersion as compared to the impregnation method. The 0.5wt% Ru/$\alpha-Al_2O_3$ catalyst prepared by deposition-precipitation exhibits higher CO conversion than 0.5wt% Ru/$\alpha-Al_2O_3$ catalysts prepared by impregnation due to higher metal dispersion and better reducibility at low temperature.

• 한국재료학회지
• /
• 제24권7호
• /
• pp.370-374
• /
• 2014

Inorganic pigments have high thermal stability and chemical resistance at high temperature. For these reasons, they are used in clay, paints, plastic, polymers, colored glass and ceramics. $CoAl_2O_4$ nano-powder was synthesized by reverse-micelle processing the mixed precursor(consisting of $Co(NO_3)_2$ and $Al(NO_3)_3$). The $CoAl_2O_4$ was prepared by mixing an aqueous solution at a Co:Al molar ratio of 1:2. The average particle size, and the particle-size distribution, of the powders synthesized by heat treatment (at 900; 1,000; 1,100; and $1,200^{\circ}C$ for 2h) were in the range of 10-20 nm and narrow, respectively. The average size of the synthesized nano-particles increased with increasing water-to-surfactant molar ratio. The synthesized $CoAl_2O_4$ powders were characterized by X-ray diffraction analysis(XRD), field-emission scanning electron microscopy(FE-SEM) and color spectrophotometry. The intensity of X-ray diffraction of the synthesized $CoAl_2O_4$ powder, increased with increasing heating temperature. As the heating temperature increased, crystal-size of the synthesized powder particles increased. As the R-value(water/surfactant) and heating temperature increased, the color of the inorganic pigments changed from dark blue-green to cerulean blue.

• 전기화학회지
• /
• 제19권4호
• /
• pp.123-128
• /
• 2016

본 연구에서는 poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP)를 나노 크기의 $Al_2O_3$ 세라믹입자와 혼합하여 전기방사법으로 복합 겔 고분자 전해질을 제조하였다. $Al_2O_3$ 세라믹입자를 혼합한 복합 겔 고분자 전해질의 이온전도도는 $9.5{\times}10^{-2}Scm^{-1}$로, 순수한 PVdF-HFP 겔 고분자 전해질보다 높은 이온전도도를 나타내며 전기화학적 안정성도 5.2 V까지 개선하였다. 전기화학적 성능을 분석하기 위해서 $LiNi_{1/3}Mn_{1/3}Co_{1/3}O_2$ (NMC)양극과 함께 전지로 제작되었으며 순수 겔 고분자 전해질과 복합 겔 고분자 전해질 셀은 0.1C-rate에서 각각 $168.2mAh\;g^{-1}$과 $189.6mAh\;g^{-1}$의 방전 용량을 가지며 우수한 수명 특성을 보여 주었다. 따라서 고유전율 세라믹 입자의 복합화는 리튬 이온 겔 고분자 전지의 안정성과 전기화학적 특성을 향상시키는 좋은 대안이 될 것으로 판단된다.

• 한국수소및신에너지학회논문집
• /
• 제24권5호
• /
• pp.353-358
• /
• 2013

To develop preferential CO oxidation reaction (PROX) catalyst for small scale hydrogen generation system, supported Pt catalysts have been applied for the target reaction. The supports were systematically changed to optimize supported Pt catalysts. $Pt/Al_2O_3$ catalyst showed the highest CO conversion among the catalysts tested in this study. This is due to easier reducibility, the highest dispersion, and smallest particle diameter of $Pt/Al_2O_3$. It has been found that the catalytic performance of supported Pt catalysts for PROX depends strongly on the reduction property and depends partly on the Pt dispersion of supported Pt catalysts. Thus, $Pt/Al_2O_3$ can be a promising catalyst for PROX for small scale hydrogen generation system.

• 한국재료학회지
• /
• 제34권1호
• /
• pp.27-33
• /
• 2024

Al₂O₃ has excellent sintering properties and is important in semiconductor manufacturing processes that require high-temperature resistance and chemical inertness in a plasma environment. In this study, a comprehensive analysis of the chemical characteristics, physical properties, crystal structure, and dispersion stability of three commercially available Al₂O₃ powders was conducted. The aim was to provide a technological foundation for selecting and utilizing appropriate Al₂O₃ powders in practical applications. All powders exhibited α-Al₂O₃ as the main phase, with the presence of beta-phase Na₂O-11Al₂O₃ as the secondary phase. The highest Na⁺ ion leaching was observed in the aqueous slurry state due to the presence of the secondary phase. Although the average particle size difference among the three powders was not significant, distinct differences in particle size distribution were observed. ALG-1SH showed a broad particle size distribution, P162 exhibited a bimodal distribution, and AES-11 displayed a uniform unimodal distribution. High-concentration Al₂O₃ slurries showed differences in viscosity due to ion release when no dispersant was added, affecting the electrical double-layer thickness. Polycarboxylate was found to effectively enhance the dispersion stability of all three powders. In the dispersion stability analysis, ALG-1SH exhibited the slowest sedimentation tendency, as evidenced by the low TSI value, while P162 showed faster precipitation, influenced by the particle size distribution.

• 한국결정성장학회지
• /
• 제23권5호
• /
• pp.255-264
• /
• 2013

$CoAl_2O_4$는 열적 및 화학적으로 매우 안정한 물질이며 독특한 광학적 특성으로 인해 도자기 제품, 유리, 페인트, 플라스틱을 장식하는 세라믹 착색제로 사용되어져 왔다. 본 연구에서는 착체중합법(Polymerized complex method)과 고상합성법(Solid state reaction)을 이용하여 단상의 $CoAl_2O_4$ 청색 무기 안료를 합성하였고, 잉크젯 프린팅용 잉크로의 응용 시 노즐 막힘 및 분산안정성과 같은 문제점을 방지하기 위해 고에너지 밀링 공정 중 하나인 어트리션밀을 이용하여 입자를 미세화하였다. 밀링 공정은 직경 1 mm의 지르코니아 볼을 이용하여 BPR(Ball to powder weight ratio) 100 : 1, 800 rpm의 조건에서 3시간 동안 진행되었다. 합성된 안료는 XRD, FE-SEM, TEM, PSA, 그리고 CIE $L^*a^*b^*$ 측정을 통하여 어트리션밀링 전후의 특성을 분석하였다. XRD 측정 결과 단상의 $CoAl_2O_4$ 청색 무기 안료가 합성되었고, 고에너지 밀링 공정을 통하여 100~200 nm의 입자 크기를 가지는 청색 나노 무기 안료를 얻었다.

• 공업화학
• /
• 제5권2호
• /
• pp.285-294
• /
• 1994

몇 종류의 담지 금촉매를 통상의 함침법과 공침법에 의하여 제조하였다. 금입자의 크기, 산소의 흡착량, CO와 NO의 흡착특성 그리고 산화환원 특성 등의 조사를 통하여, 금의 첨가효과와 활성점의 생성에 관해 연구하였다. 함침법에 의한 촉매의 금입자들은 30~100nm 정도로 크고 균일하지 않았으나, 공침법에 의한 촉매는 약 4nm인 초미립자의 상태로 매우 균일하게 분산되어 있었다 $Au/Al_2O_3$촉매에 있어서, 불활성인 $Al_2O_3$에 금의 첨가로 $N_2O$의 분해가 일어났으며, CO의 비가역흡착은 일어나지 않았으나, $O_2$는 원자상으로 비가역흡착하였다. 산소의 흡착점은 활성점이 금입자 표면에 존재하는 원자 전부가 아니라 반구형인 금입자와 담체의 경계면 주위에 한정된 활성점이었다. 저온의 $Al_2O_3$에서는 CO의 가역흡착과 비가역흡착이 일어났지만, 소량의 금의 첨가에 의하여 어느 쪽의 흡착도 약해졌다. $Au/Co_3O_4$촉매에서 CO에 대한 친화성은 $Co_3O_4$에 비해 크게 감소하였다. 환원과정에서는 금의 첨가효과가 보이지 않고, 재산화과정에서 금의 첨가효과가 뚜렷하게 나타나, 첨가된 금은 환원상태의 코발트의 재산화를 촉진시켰다.