• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1996년도 춘계학술대회
• /
• pp.250-250
• /
• 1996

Eye irritation, primary skin irritation and skin sensitization tests for Aloewhite were tested in New Zealand White rabbits and Hartley guinea pig. In primary skin irritation test of male New Zealand White rabbits, body weights were not significantly changed and primary Irritation Index(PII) was 0.47, indicating Aloewhite as mildly irritating material, In ocular irritation test, any injury on iris, conjunctival membrane, and cornea in New Zealand White rabbits was not observed. No injuries of the ocular mucous membrane were also recorded. Skin sensitization was tested in guinea Peg after intradermal and epicutaneous induction and graded I with zero % sensitization rate. These results indicate that Aloewhite was not considered to be irritant in test organs of animals.

• Parasites, Hosts and Diseases
• /
• 제47권4호
• /
• pp.387-391
• /
• 2009

Specific IgE against Acarus siro, Glycphagus domesticus, Tyrophagus putrescentiae, and Lepidoglyphus destructor have been investigated by ELISA in sera of 92 children. Of them, 41 were found to be specific IgE positive ($\geq$ 0.35 IU/ml) against at least one of house dust mite species, Dermatophagoides pteronyssinus and Dermatophagoides farinae, by an immunoblot. In 65.9% of the dust mite-sensitized children, specific IgE against at least one of these mite species was found. Sensitization levels, including co-sensitization cases were found to be 35.7% against A. siro, 24.4% against T. putrescentiae, 31.7% against L. destructor, and 26.8% against G. domesticus. In non-sensitized children, dust mite sensitization level was found to be 25.5%. Breakdown of sensitization by individual species in this group was; against A. siro and T. putrescentiae at 7.8%, against L. destructor at 13.7%, and against G. domesticus at 9.8%. When all children were reckoned, 43.5% was found to be sensitized against at least one storage mite species, with sensitizations against A. siro at 18.5%, T. putrescentiae at 26.1%, L. destructor at 21.7%, and G. domesticus at 17.4%. In dust samples collected from the dwellings of children, distribution of species was found to be A. siro (17%), G. domesticus (23%), T. putrescentiae (29%), L. destructor (25%), and unidentified (6%). In Fisher's chi-square test on SPSS program, there was a relationship between dust mite sensitization and storage mite sensitization (P < 0.05), but no meaningful relationship was found on the basis of individual mite species.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1449-1454
• /
• 2014

The co-sensitization of N719 with a cyclic thiourea functionalized organic dye, coded AZ5, for dye-sensitized solar cells (DSSCs) was demonstrated. Due to its intensive absorption in ultraviolet region, AZ5 could compensate the loss of light harvest induced by triiodide, thereby the short-circuit photocurrent density ($J_{sc}$) was increased for co-sensitized (N719+AZ5) DSSC. Moreover, the electron recombination and dye aggregation were retarded upon N719 cocktail co-sensitized with AZ5, thus the open-circuit voltage ($V_{oc}$) of co-sensitized device was enhanced as well. The increased $J_{sc}$ (17.9 $mA{\cdot}cm^{-2}$) combined with the enhanced $V_{oc}$ (698 mV) ultimately resulted in an improved power conversion efficiency (PCE) of 7.91% for co-sensitized DSSC, which was raised by 8.6% in comparison with that of N719 (PCE = 7.28%) sensitized alone. In addition, co-sensitized DSSC exhibited a better stability than that of N719 sensitized device probably due to the depression of dye desorption.

• 센서학회지
• /
• 제28권5호
• /
• pp.271-276
• /
• 2019

Pure and 0.5, 1, 2, 5, and 10 at% of Mo-doped $Co_3O_4$ yolk-shell spheres were synthesized by ultrasonic spray pyrolysis of droplets containing Co nitrate, ammonium molybdate, and sucrose and their gas sensing characteristics to 5 ppm trimethylamine (TMA), ethanol, p-xylene, toluene, ammonia, carbon monoxide, and benzene were measured at $225-325^{\circ}C$. The sensor using pure $Co_3O_4$ yolk-shell spheres showed the highest response to p-xylene and very low response to TMA at $250^{\circ}C$, while the doping of Mo into $Co_3O_4$ tended to increase the overall responses of gas sensors. In particular, the sensor using 5 at% Mo-doped $Co_3O_4$ yolk-shell spheres exhibited the high response to TMA with low cross-responses to other interfering gases. The high response and selectivity of Mo-doped $Co_3O_4$ yolk-shell spheres to TMA are attributed to the electronic sensitization by higher valent Mo doping and acid-base interaction between TMA and Mo components.

• Toxicological Research
• /
• 제16권1호
• /
• pp.17-25
• /
• 2000

Chitosan cross-linked collagen-glycosaminoglyan (CCGM) is an artificial skin substitute made to form a sponge like dimensional matrix. It can be used to facilitate reconstruction of dermal tissue when applied on large wounds such as severe burns. In order to study the toxicological effects of CCGM the cytotoxicity, local irritation and skin sensitization test were carried out according to the standards of ISO 10993. In the cytotoxicity test utilizing LDH and MTT test, both the CCGM and its extract had no toxicity of Balb/c 3T3 cells. The local irritatioin test on rabbit skin demonstrated that CCGM did not promote any harmful when directly applied on skin. In addition, it did not elicit any allergic reaction in the guinea pig maximization test. Based on these results, it is suggested that CCGM is a material without cytotoxicity, local irritation and allergenicity.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2002년도 춘계학술대회 논문집
• /
• pp.21-29
• /
• 2002

가스계 소화약제시스템의 인명안전 또는 기타 안전관련으로 CO2 시스템과 청정약제시스템을 중심으로 기술해보았습니다. 인명에 대한 위험을 최소화하면서 CO2 소화시스템의 혜택을 얻기 위해서는 설계, 시공, 유지관리면에서의 인명안전에 대해 상당한 관심을 기울여야한다. 청정 소화약제를 통상의 거주구역에 사용할 경우의 주요요소는 독성문제이다. 할로겐화탄소약제 테스트에서의 주요 관점은 급성효과, 즉 단기간 노출의 경우이다. 주요급성효과에는 마취성과 심장감작성이 있다. 불활성가스약제의 경우 주요 신체적 영향으로는 산소농도의 저하문제를 들 수 있다.

• 한국환경보건학회지
• /
• 제46권6호
• /
• pp.685-693
• /
• 2020

Objectives: Recent data indicate that sensitization to mold contributes to the severity and persistence of asthma. The aim of this study was to investigate relationships between indoor mold concentrations and pulmonary function parameters in asthmatic children with mold sensitization. Methods: Asthmatic subjects who had a positive result in skin-prick testing to more than one mold allergen, such as Alternaria, Aspergillus, or Penicillium, were enrolled. Their pulmonary function and methacholine challenge test results were collected. Measurements of blood eosinophil, serum IgE, and fractional exhaled nitric oxide (FeNO) were taken. Indoor levels of VOC, CO2, PM10 and PM2.5 in each subject's house were measured. We counted mold and bacteria colonies from the subjects' house air samples. Results: The mean levels of FEV1, FVC, FEV1/FVC, and FEF25-75 were 82.8±19.7, 87.3±17.9, 85.8±8.3, and 82.3±28.9%, respectively. The mean FeNO level was 19.8±11.2 ppb and the geometric mean (range of one SD) of methacholine PC20 was 3.99 mg/mL (0.67-23.74 mg/mL). The average indoor air pollutant levels were below the recommended levels set by the Ministry of Environment for multiplex buildings. Indoor mold levels showed a significant inverse correlation with methacholine PC20, but not with the baseline pulmonary function parameters. Conclusion: Indoor mold concentrations are a risk factor for increased bronchial hyperresponsiveness among asthmatic children with mold sensitization. Targeted environmental intervention should be considered for selected asthmatic children with mold sensitization for avoiding severe airway hyperresponsiveness.

• 한국분말재료학회지
• /
• 제29권6호
• /
• pp.511-516
• /
• 2022

Electroless plating is widely utilized in engineering for the metallization of insulator substrates, including polymers, glass, and ceramics, without the need for the application of external potential. Homogeneous nucleation of metals requires the presence of Sn-Pd catalysts, which significantly reduce the activation energy of deposition. Therefore, rinsing conducted during Sn sensitization and Pd activation is a key variable for the formation of a uniform seed layer without the lack or excess of catalysts. Herein, we report the optimized rinsing process for the functionalization of Sn-Pd catalysts, which enables the uniform FeCo metallization of the glass fibers. Rinsing enables good deposition of the FeCo alloy because of the removal of excess catalysts from the glass fiber. Concurrently, excessive rinsing results in a complete removal of the Sn-Pd nucleus. Collectively, the comprehensive study of the proposed nanomaterial preparation and surface science show that the metallization of insulators is a promising technology for electronics, solar cells, catalysts, and mechanical parts.

• 한국재료학회지
• /
• 제27권8호
• /
• pp.431-437
• /
• 2017

This study investigated the surface pit corrosion of SS420J2 stainless steel accompanied by intergranular crack. To reveal the causes of surface pits and cracks, OM, SEM, and TEM analyses of the microstructures of the utilized SS420J2 were performed, as was simulated heat treatment. The intergranular cracks were found to have been induced by a grain boundary carbide of $(Cr,Fe)_{23}C_6$, which was identified by SEM/EDS and TEM diffraction analyses. The mechanism of grain boundary sensitization occurred at the position of the carbide, followed by its occurrence at the Cr depleted zone. The grain boundary carbide of $(Cr,Fe)_{23}C_6$ type precipitated during air cooling condition after a $1038^{\circ}C$ solid solution treatment. The carbide precipitate formation also accelerated at the band structure formed by cold working. Therefore, using manufacturing processes of cooling and cold working, it is difficult to protect SS420J2 stainless steel against surface pit corrosion. Several counter plans to fight pit corrosion by sensitization were suggested, involving alloying and manufacturing processes.

• 생약학회지
• /
• 제49권3호
• /
• pp.246-254
• /
• 2018

Pectin lyase-modified red ginseng extract (GS-E3D) is a newly developed ginsenoside Rd-enriched ginseng extract. This study was designed to investigate the skin safety of GS-E3D. Single oral toxicity, single dermal toxicity, bovine corneal opacity and permeability (BCOP) assay, skin irritation test with $SkinEthic^{TM}$ human epidermis model, skin sensitization local lymph node assay, and human patch test, were examined. The oral and dermal $LD_{50}$ value of GS-E3D was over 2,000 mg/kg in rats. GS-E3D was identified as a non-irritant to skin in BCOP assay, human epidermis models, and patch test from the 32 human subjects. The skin sensitization potential of GS-E3D was less than 25% in local lymph node assay. These results indicate that GS-E3D can be used as a safe ingredient without adverse effects in various skin care products.