• 제목/요약/키워드: Co-fire

검색결과 941건 처리시간 0.024초

A study on the creation of mission performance data using search drone images (수색용 드론 이미지를 활용한 임무수행 데이터 생성에 관한 연구)

  • Lee, Sang-Beom;Lim, Jin-Taek
    • Journal of the Institute of Convergence Signal Processing
    • /
    • 제22권4호
    • /
    • pp.179-184
    • /
    • 2021
  • Along with the development of the fourth industry, the public sector has increasingly paid more attention to search using drones and real-time monitoring, for various goals. The drones are used and researched to complete a variety of searching and monitoring missions, including search for missing persons, security, coastal patrol and monitoring, speed enforcement, highway and urban traffic monitoring, fire and wildfire monitoring, monitoring of illegal fishing in reservoirs and protest rally monitoring. Police stations, fire departments and military authorities, however, concentrate on the hardware part, so there are little research on efficient communication systems for the real-time monitoring of data collected from high-performance resolution and infrared thermal imagining cameras, and analysis programs suitable for special missions. In order to increase the efficiency of drones with the searching mission, this paper, therefore, attempts to propose an image analysis technique to increase the precision of search by producing image data suitable for searching missions, based on images obtained from drones and provide the foundation for improving relevant policies and establishing proper platforms, based on actual field cases and experiments.

Anti-inflammatory Effects of New Herbal Formula Cheongyeoungkeumyeum (청영금음(淸營金飮)이 자유산소라디칼과 염증매개인자에 미치는 영향)

  • Kim, Seung-Tae;Lee, Boo-Kyun;Woo, Won-Hong;Kim, Hyeong-U;Lee, Young-Cheol;Lee, Jung-Bok;Lee, Jang-Cheon
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • 제26권2호
    • /
    • pp.175-180
    • /
    • 2012
  • The purpose of this study is to verify the anti-inflammatory effectiveness of Cheongyeoungkeumyeum(CYK) including seven herbal medicines of that major effectiveness is to clear heat, to relieve fire toxicity and to clear damp-heat. To evaluate anti-inflammatory effectiveness of CYK, we measured the production of reactive oxygen species(ROS), nitric oxide(NO) cyclooxygenase-2(COX-2) and in TNF-${\alpha}$ LPS-activated Raw 264.7 cells. Cell viability was determined by MTT assay. The concentrations of ROS and relative level of NO were measured with DPPH assay and Griess reagent, respectively. COX-2 and TNF-${\alpha}$ were detected by enzyme immuno assay(EIA) and enzyme-linked immunosorbent assay(ELISA). As a result, we found that CYK suppressed LPS-induced ROS and NO production in a dose-dependent manner. Also CYK significantly inhibited LPS-induced COX-2 activity and the release of TNF-${\alpha}$. These results indicate that the CYK may have an anti-inflammatory agent for the treatment of various inflammatory disease.

Estimation of The Global Warming Potential of Fluorinated Green House Gases (불화온실가스의 흡수단면적 측정을 통한 지구온난화지수의 추정)

  • Kim, Jihye;Lee, Jeongsoon
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제30권4호
    • /
    • pp.387-397
    • /
    • 2014
  • This work aims at estimating global warming potentials (GWP) of $CF_3Br$ and HFC-134a among green house gases. It has been reported that they have much higher GWP than $CO_2$ in the atmosphere. $CF_3Br$, halon 1301 which is well known to be a fire extinguisher, as one of the bromine-containing halons has been banned since 2003 due to destruction of ozone. HFCs, a kind of chiller which replaced chlorofluorocarbons (CFCs) are one of greenhouse gases regulated by the Kyoto Protocol. In this study, we produced GWPs of $CF_3Br$ and HFC-134a by calculating a life time and measuring an absorption cross section to obtain a radiative forcing (RF). Their absorption cross sections were measured by using Fourier-transformed infrared spectroscopy (FTS) with a gas cell filled with their certified reference materials at room temperature. As a result, the RFs of $CF_3Br$ and HFC-134a were 0.32 and $0.168Wm^{-2}ppb^{-1}$, respectively and the GWPs were calculated as 7989, 6076, 3903 for $CF_3Br$ and 3855, 1300, 656 for HFC-134a for the time horizon of 20, 100, 500 years, respectively. Overall, uncertainty of the estimated GWPs can be estimated to be about 2.6%. Our results were compared with those proposed by the previous studies (IPCC, 2007; WMO, 1999).

A development of video-complex remote monitoring system for offshore plant (영상복합형 해양플랜트 원격 관제 시스템 개발)

  • Kim, Hun-Ki;Hwang, Hun-Gyu;Yoo, Gang-Ju;Lee, Jang-Se;Park, Hyu-Chan;Shin, Ok-Keun;Lee, Seong-Dae
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제38권1호
    • /
    • pp.56-63
    • /
    • 2014
  • An offshore plant needs costly maintenance and has difficulty coping with various accidents coming from the exposure to the environmental threats such as typhoons, tidal waves and etc., in addition to the artificial ones such as fire, collision of ships and etc. In this paper, we develop the video-complex remote monitoring system for an offshore plant, using AtoN AIS and multi-stage database to monitor an offshore plant and solve those problems. The system handles real time video cameras to collect and monitor images on an offshore plant. So, users can be exactly and quickly aware of the information on various situations with the monitoring application based on ENC.

Study on the Pyrolysis Kinetics of Mixture of RDF and Carbonized Sludge with Thermogravimetric Analysis (RDF와 탄화슬러지 혼합물의 열중량 및 열동역학 특성 연구)

  • Sun, Jian Feng;Hwang, Hyeon Uk;Kim, Myung Gyun;Nzioka, Antony Mutua;Lee, Chang Soo;Kim, Young Ju
    • Journal of Environmental Science International
    • /
    • 제25권2호
    • /
    • pp.281-288
    • /
    • 2016
  • After analyzing of heating value of four kinds of RDF, the RDF-D has the highest heating value, was chosen to be mixed with carbonized sludge by different ratio. The 85%:15% ratio, which has the highest efficiency, was analyzed with thermogravimetric and pyrolysis kinetics. Applying of Kissinger method, activation energy was obtained from slope which is calculated from relation of ln(${\beta}/T^2{_m}$) and $1/T_m$. The kinetic parameters obtained from Kissinger method were 46.06 kJ/mol of RDF, 55.99 kJ/mol of carbonized sludge and 40.68 kJ/mol of mixture of RDF and carbonized sludge. The mixture of RDF and carbonized sludge has the lowest activation energy and frequency factor, during thermal decomposition reaction it has the slowest reaction rate and needs the lowest energy. Although activation energy with pyrolysis of RDF was irregularly scattered, it showed that activation energy was stabilized by co-pyrolysis of RDF and additives(Carbonized Sludge).

Impact of the Smoke Aerosol from Russian Forest Fires on the Atmospheric Environment over Korea during May 2003 (2003년 5월 러시아지역에서 발생한 산불로 인한 스모크 에어로졸 플룸의 영향)

  • Lee, Kwon-Ho;Kim, Jeong-Eun;Kim, Young-Joon;Kim, Joon
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제20권5호
    • /
    • pp.603-613
    • /
    • 2004
  • Extensive forest fires occurred across the border in Russia. particularly east of Lake Baikal between the Amur and Lena rivers in May 2003. These forest fires released large amounts of particulates and gases into the atmosphere. resulting in adverse effects on regional air quality and the global radiation budget. Smoke pollution from the Russian fires near Lake Baikal was sometimes transported to Korea through Mongolia and eastern China. In this study ground based radiation (visible and UV-B) data measured during May 2003 at Seoul and Kwangju were analyzed to estimate smoke aerosol impacts on solar radiation. Surface criteria air pollutants ($PM_{10}$, CO, $O_3$) data were also obtained from National Institute of Environmental Research (NIER) during smoke aerosol event period (19 May~24 May 2003). Large Aerosol Optical Depth (AOD) 1.0~3.0 was observed during this period due to the influence of the long range transport of smoke aerosol plume from the Russian fires, resulting in short-wavelength direct aerosol radiative forcing of -90~ -200W/$m^2$. These smoke aerosol plume caused decrease in surface UV-B radiation up to 80% and increase in PM_(10) concentration up to 200${\mu}g/m^3$ exceeding the 24 hour ambient air quality standard.

A study on the Development of Low-loss Type Mold Autotransformers (저손실형 몰드 단권변압기 개발)

  • Lee, Jong-Su;Shin, Myung-Ho;Mun, Byung-Chul
    • Proceedings of the KIEE Conference
    • /
    • 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.92-94
    • /
    • 2003
  • The autotransformer currently used on the electric railway system is made of class A insulation material and uses the paper insulation method. As a power converter supplying power to the trolley wire, the autotransformer is one of critical equipment in the railway system. In the autotransformer, load irregularly changes and overload often occurs. These cause overheating of the autotransformer and facilitate deterioration of the autotransformer resulting in burnout accidents due to insulation breakdown. Also, the current autotransformer has poor insolation and short-circuit strength which often badly affect the service life of the transformer, and needs to improve its quality urgently. To overcome one of existing shortcomings of the mold transformer, manufacturers use epoxy resins that have superior flame retardancy to get rid of fro and explosion possibilities during accidents. Currently, new mold transformers are used in indoor distribution facilities with fire-fighting equipments. Coils molded in epoxy resins do not have their insulation performance compromised by humidity, dust, etc enabling easy inspection and maintenance. Comparing to the oil immersed transformer, the mold transformer does not have any concern about environmental pollutions by oil leak or replacement Therefore, to reduce breakdowns and improve reliability of the autotransformer, it is necessary to develop a new mold autotransformer with low loss suitable for our environment to suppress breakdowns of the autotransformer and improve the reliability. This study is about development of a low-loss mold autotransformer necessitated by reasons mentioned earlier.

  • PDF

Reforming of Expanded Graphite for Improving Fire Resistance of Fireproof Sealant (방화용 실란트의 내화성 향상을 위한 첨가제로서 팽창흑연의 개질)

  • Hong, In Kwon;Lee, Won Jae;Lim, Hyun Seok;Lee, Seung Bum
    • Applied Chemistry for Engineering
    • /
    • 제28권4호
    • /
    • pp.437-441
    • /
    • 2017
  • This study was carried out to investigate the volumetric expansion ratio and hardness of expanded graphite after coating with various resins which were used as an additive of fireproof sealant. The coating thickness of the resin, which represents the coating rate, was dependent of the drying speed of the resin and the viscosity of the resin. Therefore the coating thickness was shown as follows: polyvinyl acetate > acrylic resin > urethane resin > water soluble latex. Furthermore, the volumetric expansion ratio was as follows: urethane resin > water soluble latex > acrylic resin > polyinyl acetate and the hardness was as follows: polyvinyl acetate resin > acrylic resin > water soluble latex > urethane resin. This showed that the volume of expansion was reduced by expansion, which was not covered by coating, but significantly increased by increasing hardness and allowed it to be used as a refractory addition. According to the response surface methodology, the optimized addition amount and stirring speed of acrylic resin were 37.6 wt% and 441.4 rpm, respectively.

Material Degradation of 2Cr and 12Cr Tube Steels for High Temperature and Long-Time Exposure (2Cr 및 12Cr 크롬강튜브의 고온 장시간 사용에 따른 열화현상)

  • Choe, Byung-Hak;Lee, Gil Jae;Kim, Sang-Ho;Hong, Key-Yong;Kim, Woo Sik;Baek, Un Bong;Nahm, Seung Hoon
    • Journal of the Korean Institute of Gas
    • /
    • 제16권5호
    • /
    • pp.28-34
    • /
    • 2012
  • Material degradation of Cr steels in using for boiler tubes was studied in the relation of microstructural changes like carbide behavior and mechanical properties of hardness and creep-rupture life. The carbide dissolution was occurred in 2Cr steel of T22 during high temperature operation. And the grain refinement within martensite lath of 12Cr steel of X20 was derived by the high temperature-long time exposure. But the specific phenomena of material degradation which might be represented by hardness or creep-rupture time of the used tubes were not shown in all the tubes of T22 and X20 even in the fire-side using.

How Phenolic Composites were chosen - In Case of England (7) (페놀 컴포지트 실용화의 길 - 영국의 경우 (CASE STUDY 7))

  • Nomaguchi Kanemasa;Forsdyke Ken L.
    • Composites Research
    • /
    • 제18권1호
    • /
    • pp.55-66
    • /
    • 2005
  • Beside fire resistance, for Phenolic Composites(here-in-after PCs), in actual, moisture resistance are also needed when they are applied to components in wet uses such as in Naval vessels and in off-shore operations where direct water contact may be expected. PCs have so-called 'Micro-porous' when they are made by normal GRP manufacturing techniques, which causes much larger amounts of water absorption in them to higher level of around $7\%$. So, this figure, which indicate impending disaster in a polyester matrix laminate, has made some specifiers suspicious of the effect of the water on mechanical performance of PC in 'wet' service. To solve this problem, a large amount work has been carried out by workers in UK and US. This paper is an attempt to explain that the effect of the high water absorption of PCs is not the disaster that some 'prophets' may foretell. Let's open our next door fur better society much safetyfied by our own efforts with PCs. like in UK.