• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1998년도 춘계학술발표 논문집
• /
• pp.57-62
• /
• 1998

The objectice of this study is to dvaluate the physical condition response of a drever by the change of CO$^{2}$ concentration in the automobile with EEG spectrum analysis. The experiment was performed in a semi-shielded simulated automobile with 10 healthy adults. The results showed that as CO$_{2}$ concentration increased from 500ppm to 6,000ppm, the $\alpha$' value significantly decreased(p*<0.05) while $\beta$' increased (p*<0.05). In a real parked automobile with 2 adult passengers, the CO$_{2}$ gas concintration reached at 6,000ppm in 15 minutes. These spectral data are in well agreement with the subject's verval statement of experiencing uncomfortableness when CO$_{2}$gas was increased ti over 5,000ppm. These results indecated that the EEG spectrum analysis can be appropriately used to assess physical condition of a driver in the changing automobile environment.

• 대한환경공학회지
• /
• 제33권4호
• /
• pp.258-266
• /
• 2011

수중 경도물질에 의해 유발된 스케일은 수질 저해는 물론 배관의 기능에 막대한 손실을 초래할 수 있어 관리가 필요하다. 특히 온수시스템의 경우, 온도에 의해 스케일화작용이 가속화되므로 관리가 필요한 시설 중 하나이다. 현재까지는 화학약품이나 에너지가 소모되는 화학적, 물리적, 전자기적 방법과는 다른 무전원방식의 Frequency Driver (FD)를 이용하여 스케일 생성 방지 효과를 확인하고자 하였다. 500 mg/L의 경수에 33일간 3종류의 관 시편을 침지시켜 관 재질별 스케일 형성도를 비교하기 위해 XRD와 SEM을 이용하여 표면을 분석하였다. 주철관에서는 경도에서 유발된 스케일인 calcite ($CaCO_3$)가 형성되었고, 구리나 스테인리스관에 비해 부식율이 높았다. 온수순환장치를 제작하여 경도 300 mg/L로 $50^{\circ}C$의 조건에서 FD 설치 유무에 따른 주철관의 스케일 형성도와 수질 변화를 비교하였다. XRD 결과에서 FD를 설치하였을 경우 calcite의 생성은 비교적 적은 반면, 좋은 부식생성물인 magnetite ($Fe_3O_4$)의 생성을 확인할 수 있었으며, SEM 사진에서도 FD의 스케일 저감 효과를 확인할 수 있었다. 관 내부의 스케일 양의 경우, FD를 설치하지 않은 경우에 비해 FD를 설치하였을 경우 관 연결부분에서는 16%, 관 전체길이에서는 14%, 열교환기에서는 42%의 적은 스케일이 형성되어 FD의 스케일 저감효과를 확인할 수 있었다. 또한 FD 설치 유무에 따른 수질분석 결과를 토대로 FD가 수질의 화학적 변화 없이 경도물질의 결정화를 방지하는 것으로 나타나 환경적으로도 안전함을 확인하였다.

• 한국표면공학회지
• /
• 제52권3호
• /
• pp.163-170
• /
• 2019

Durability of instrument is one of the most important factor to ensure accurate treatment and decrease failure for the orthopedic surgical operation. Normally, a set-screw driver tip has been processed with hard coating for their higher durability and wear resistance. And several surface modification methods were obtained such as titanium nitride (TiN) coating, diamond like carbon coating, other nitriding, and etc. In this study, we have surface modified on set-screw driver tip with TiN and DLC, investigated whether the TiN and DLC coatings affect the mechanical properties and durability of the set-screw driver tip in the pedicle screw system. The surface morphologies were observed with scanning-electron microscopy (SEM), and the static/dynamic torsional properties were investigated with universal testing machine based on ASTM F543. Coating thickness of each coatings were commonly around $1^{\circ}C$. Static torsional stiffness, and ultimate torque values for DLC and TiN coated samples were significantly higher than those of non-coated sample by the pared T-test. Surface morphology of after the dynamic torsional test was more clean with less scratch or friction traces from DLC coating than that of TiN coating and non-coated sample.

• 한국분무공학회지
• /
• 제19권1호
• /
• pp.40-46
• /
• 2014

Recently rise in oil prices feet the burden on not only diesel vehicle driver but also LPG vehicle driver, and get interested in various way to reduce fuel costs. In this study discuss on exhaust emissions characteristics on driving cycle mode and ignition advance condition change of CNG/LPLI Bi-Fuel vehicle. Experimental test was performed by changing the conditions of fuel (LPG/CNG), spark advance (Base, $10^{\circ}CA$, $15^{\circ}CA$), and driving mode (FTP-75, HWFET, and NEDC). In case of CO emission, in the order of CNG Base, CNG S/A10, S/A15 condition are average reduced -21%, -35%, -29% respectively compared to LPG fuel. The active emission reduction from the initial engine start, spark retard is likely to be beneficial in catalyst warm-up and improve combustion stability rather than spark advance.

• 한국지반공학회논문집
• /
• 제26권1호
• /
• pp.55-62
• /
• 2010

진동타입기에 의해 시공되는 강널말뚝의 관입속도를 예측하고자 수정 Ramberg-Osgood 모델을 적용하여 진동타입기의 주기운동에 따른 지반의 동적 저항력을 모사하고자 하였다. 수정 Ramberg-Osgood 모델을 규정짓는 다양한 인자는 현장시험을 통해 구한 동적 지반저항력곡선의 양상을 반영하여 결정하였는데 이때 매개변수로는 표준관입시험값(N값)을 이용하였다. 관입속도는 해석결과가 현장시험결과에 비해 작게 계산되었으며 관입깊이에 따른 관입 소요시간은 해석결과가 현장시험결과에 비해 크게 계산되어 해석결과가 현장시험결과에 비해 보수적인 값을 보여주었다.

• 설비공학논문집
• /
• 제29권3호
• /
• pp.134-141
• /
• 2017

The purpose of this study was to analyze physiological changes via a cold air reaction experiment to generate basic data that are useful for the development of an automobile active air conditioning system to prevent drowsiness. The $CO_2$ concentration causing drowsiness in vehicle operation was kept below a certain level. Air was blown to the driver's face by using an indoor air cooling apparatus. Sleepiness and the arousal state of the driver in cold wind were measured by physiological signals. It was evident in the EEG that alpha waves decreased and beta waves increased, caused by cold air stimulation. The ${\alpha}/{\beta}$ ratio was reduced by about 52.9% and an alert state confirmed. In the electrocardiogram analysis, the efficiency of cold air stimulation was confirmed by the mean heart rate interval change. The R-R interval had a delay time of about one minute compared to the EEG response. The findings confirmed an arousal effect from sleepiness due to cold air stimulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.140.4-140
• /
• 2001

This paper presents the duplex controller operated as master slave for Self Excited Static Type excitation system and the results of operation for duplex digital excitation system. Software is made up duplex multi-tasking control algorithm which is based on VxWorks(real-time OS), preprocessing algorithm for input-output signal, BSP & Device Driver for interfacing hardware and software, and OIS(Operator Interface Station) program, HMI S/W. Master controller and slave controller intercommunicate dominant data to minimize bump when controller switchover from master to slave occurs. Communication between master controller and slave controller is duplicated and communication between OIS and controller is duplicated. Hardware is made up VMEBUS based controller which is designed with PPC & I/O board ...

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.113-114
• /
• 2012

최근 전력용반도체 모듈 시장이 발전함에 따라 고전압 제품에 대한 수요가 증가하고 있다. 하지만 1700V급 이상의 고전압용 IGBT 모듈을 구동하기 위한 게이트 드라이버의 경우 해외의 제품은 단가가 매우 높은 것이 현실이다. 이에 따라 1700V급 이상의 전력반도체 모듈용 게이트 드라이버를 손쉽게 구현할 수 있도록 단가 경쟁력과 향상된 성능을 갖춘 게이트 드라이버를 연구하게 되었다. 본 논문에서는 1700V급 이상의 전력용반도체 모듈용 게이트 드라이버를 제작하고 각 부분의 파형을 설명하였다.

• 공학교육연구
• /
• 제13권5호
• /
• pp.36-40
• /
• 2010

The vehicle oriented block box system based on the u-healthcare and the human-free guard functions is developed in this paper. We also suggested the design philosophies, ideas, and analyzed the performance of the suggested system. The developed vehicle oriented black box system has some characteristics such as; 1) detects the dangerous situation by ultrasonic sensor in advance, and stores the situation information of the neighborhood of the vehicle to the imbedded SD memory card if the dangerous situation may be occurred in the parked vehicle; 2) detects the present location and speed information of the vehicle by GPS receiver and 3-axes acceleration sensor, and stores the information to the SD memory card periodically if the vehicle is running; 3) measures the dioxide carbon in the vehicle inside using $CO_2$ sensor, and forces the ventilation motor of the vehicle to operate and maintains the driver's health if the measured level is more than standard health requirements; 4) provides the stored vehicle's operating information to the driver by GUI (Graphical User Interface) based touch LCD monitor.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 춘계종합학술대회
• /
• pp.445-448
• /
• 2007

소형 LD 구동 장치를 개발하고, 그 성능을 평가하였다. 개발된 장치는 사용 및 이동이 편리하도록 소형으로 제작되었으며, 안정적인 LD의 구동을 위해 AGC(Auto Gain Control) 및 APC(Auto Power Control)를 적용하였다. 개발된 장치의 LD구동전류 안정도는 $100{\mu}AmA$ 이내로 레이저 광 출력 안정도는 0.07mW이하로 안정된 구동 성능을 나타내었다.