• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1405-1407
• /
• 2000

This paper is on optimal design for DC substation capacity for Mass Transit System. Three factors are considered for the design i.e. substation arrangements, line configuration and substation power capacity. In this study, we discussed substation power capacity only. At first, DC-fed-traction system is introduced on an outline, a characteristics of train and fed network. Optimal design procedures is described, and modelling for DC-fed-traction system are presented. The circuit-solution method is presented by matrix formula. In order to simulate DC substation power capacity more closely to actual situations, we proposed the program.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1189-1191
• /
• 2005

This paper describes the design parameters for permanent magnet actuator(PMA). Recently, a PMA is great attention and increased in used. However, it needs a technique for applying design parameters in order to satisfy characteristics of PMA. In this paper, presented the design parameters for PMA that has both a mutual relation and a consideration for load.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.856-867
• /
• 2020

This paper aims to provide the most useful method of determining an optimum LCB position and design direction of fore- and aft-body hull shape for a SLBV. It is known that the SLBV has a lower length-to-beam ratio, larger Cb and simpler stern shape designed for the installation of azimuth thrusters comparing to those of conventional LNG carriers. Due to these specific particulars of SLBV, the optimum LCB position was very different to that of conventional LNG carrier. And various approaches were applied to determine the optimum fore- and aft-body hull shape. The design direction for the optimum hull-form was evaluated as the minimization of the total resistance which includes the wave-making resistance and form-drag with numerical simulation.

• 전기화학회지
• /
• 제18권4호
• /
• pp.137-142
• /
• 2015

$Mn_{1+X}Co_{2-X}O_4$ solid solutions with various Mn/Co ratios were synthesized by a combustion method, and used as cathode catalysts for lithium/air secondary battery. Their electrochemical and physicochemical properties were investigated. The morphology was examined by transmission electron microscopy (TEM), and the crystallinity was confirmed by X-ray diffraction (XRD) analyses. For the measurement of electrochemical properties, charge and discharge measurements were carried out at a constant current density of $0.2mA/cm^2$, monitoring the voltage change. Electrochemical impedance spectroscopy (EIS) analyses were also employed to examine the change in charge transfer resistance during charge-discharge process. $Mn_{1+X}Co_{2-X}O_4$ solid solutions showed enhanced cycleability as a cathode of Li/air secondary battery, and the performance was found to be strongly dependent on Mn/Co ratio. Among synthesized catalysts, $Mn_{1.5}Co_{1.5}O_4$ exhibited the best performance and cycleability, due to high charge transfer rate.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.208-218
• /
• 2006

It is very important to evaluate predictable problems diversely such as stability of a tunnel and structures when tunnel is inevitably constructed in the area where is adjacent to a structure and low overburden. Double electrified railway design on the third section of Donghae-Nambu line studied in this paper has some problems mentioned above. So more careful works are required before construction. In this study, ground surrounding is composed of faults, fault zone and set back about 13m from a Buddhist temple located on the upper part of the tunnel. From these conditions, this case study presents proper methods considering ground condition, effects of blasting and civil petitions. It is tried to make the tunnel and Buddhist temple stable by analytical technique and analysis of existing cases. And design considering stability of tunnel and adjacent structure during operation is carried out as well. Especially, environmentally friendly railway tunnel which is appropriate to the local condition and surroundings is designed by minimizing noise and vibration that is able to occur during construction and train service. From now on, this study is helpful to better design in the case of tunnel design which has to consider civil petition.

• 한국항공우주학회지
• /
• 제50권1호
• /
• pp.31-38
• /
• 2022

위성용 TR모듈이 지상용 또는 항공용 TR모듈과 다른 점은 높은 레벨의 진동, 충격과 같은 발사환경과 우주방사능, 진공, 온도 변화와 같은 궤도환경 고려가 필요하다는 것이다. 따라서 지상용 또는 항공용 요구사양과는 다른 전기적, 구조적 조건을 요구한다. 이에 따라 서론에서는 발사환경, 궤도환경에 대해서 서술하고, 본문에서는 위성용 TR모듈에서 GaN의 활용과 요구되는 조건을 충족하기 위한 설계 과정을 기술한다. 특히, 부품선정부터 Derating&RF Budget 설계, 공정설계, 열해석까지 각각 단계에서 고려할 설계요소에 대해서 서술한다.

• 한국군사과학기술학회지
• /
• 제27권2호
• /
• pp.247-255
• /
• 2024

Development of electronic warfare(EW) software has become increasingly challenging due to stricter regulations, shorter development cycles, and increased reliability testing. Consequently, software development often proceeds without proper architecture design, which can lead to missing critical quality requirements and potential system redesigns. In this study, we propose using Attribute-Driven Design(ADD) 3.0 to design software architecture specifically tailored for EW systems, enabling a more systematic approach to address quality requirements. The paper presents an overview of EW software and ADD 3.0 methodology, followed by an analysis of the architecture design results using static and dynamic views. The paper concludes by discussing the effectiveness of the proposed architecture design.

• 한국해양환경ㆍ에너지학회지
• /
• 제18권1호
• /
• pp.15-21
• /
• 2015

본 연구에서는 이산화탄소 해양지중저장을 위한 운송 수단으로 활용될 $CO_2$ 운송선의 타당성조사 결과에 대하여 논한다. 중고 화물선 개조에 의한 $CO_2$ 운송선 확보와 신조에 의한 운송선 확보를 위한 개념 설계를 수행하였고, 이를 토대로 $CO_2$ 운송선의 획득 비용을 추정하였다. 마지막으로 가정한 시나리오에 대한 운용 방안을 검토하여 연간 운송량을 수송할 수 있는 필요 척수와 소요 비용을 함께 추정하였다.

• 한국수소및신에너지학회논문집
• /
• 제20권2호
• /
• pp.168-178
• /
• 2009

To check feasibility of SEWGS(Sorption Enhanced Water Gas Shift) system, conceptual design and sensitivity analysis of operating variables have been investigated based on a design program of two-interconnected fluidized bed. Based on the conceptual design results, the optimum configuration for SEWGS was considered. Among three configurations, bubbling beds system was selected as the best configuration. Process design results indicate that the SEWGS system is compact and feasible. Based on the selected operating conditions, the effects of variables such as pressure, $CO_2$ capture capacity, solid inventory, CO conversion and $CO_2$ capture efficiency have been investigated as well.

• 농약과학회지
• /
• 제7권1호
• /
• pp.1-11
• /
• 2003

새로운 농약을 탐색하고 개발하는데 있어서 고효율 유기함성 (HTOS) 기술과 고효율 검색 (HTS) 기술 등의 발전과 더불어 컴퓨터 화학을 이용한 분자설계 (CAMD) 방법으로 보편화되고 있는 비교 분자장 분석(CoMFA)과 비교 분자 유사성 지수분석(CoMSIA) 등, 3D QSAR 기법들을 위시하여 분자 홀로그램 구조 - 활성관계 (HQSAR) 분석방법 등, QSAR 기법들을 요약하고 그 활용 사례들을 간략하게 소개하였다.