• 제목/요약/키워드: Co-agent

검색결과 1,615건 처리시간 0.024초

$CO_2$ 소화제 노즐 분사각 및 분사속도가 $CO_2$ 농도분포특성에 미치는 영향에 관한 수치적 연구 (A Numerical Simulation of the Effect of the Injection Angle and Velocity of the $CO_2$ Agent Nozzle on the Characteristics of $CO_2$ Concentration Distribution)

  • 박찬수
    • 한국화재소방학회논문지
    • /
    • 제20권2호
    • /
    • pp.44-53
    • /
    • 2006
  • 선박에 설치되는 고정식 $CO_2$ 소화장치의 구성요소 중 하나인 $CO_2$ 소화제분사노즐의 분사각과 분사속도가 유동 및 $CO_2$ 농도분포특성에 미치는 영향을 분석하기 위하여 전산모의실험을 2차원 비정상상태로 수행하였다. 유동장과 $CO_2$ 소화제 농도장을 계산하여 분석하였다. 소화제 분사노즐의 조건에 따라 유동형태의 상이성을 확인할 수 있었으며, 모든 소화제 분사노즐조건에서 와류가 형성되는 영역으로부터 주위로 등농도선대가 확장됨을 알 수 있었다. 소화제 분사노즐각에 따라 계산영역의 밑바닥면을 따르는 벽면제트기류의 강도가 다르게 나타났고, 등농도선대가 확장 또는 축소됨을 예측 가능하였다. $CO_2$ 소화제 분사유량을 일정하게 유지한 상태에서 소화제 분사속도를 증가시키는 것이 감소시키는 것 보다 더 높은 $CO_2$ 등농도선대가 밑바닥면 상에 형성될 것으로 예측되었다.

$CO_2$소화제 노즐수에 따른 유동특성 및 소화제농도분포에 대한 연구 (A Study of the Characteristics of Flow and the Distribution of $CO_2$ Agent Concentration According to the Number of $CO_2$ Agent Nozzle)

  • 박찬수
    • 한국화재소방학회논문지
    • /
    • 제19권2호
    • /
    • pp.37-44
    • /
    • 2005
  • 가스계소화설비인 $CO_2$소화장치의 구성 중 $CO_2$노즐수에 따른 유동특성 및 $CO_2$소화제 농도분포를 분석하기 위하여 $CO_2$ 노즐수를 변화시키면서 전산모사실험을 3차원 비정상상태로 수행하였다. 실제 선박의 기관실을 방호공간으로 선정하여 유동장과 $CO_2$소화제 농도장을 계산하였다. $CO_2$소화제 노즐수를 2개에서 4개로 증가시킬 경우는 낮은 농도분포를 나타냈고, $CO_2$소화제 노즐수를 6개 이상으로 증가시킬 경우는 전 영역에 영향을 미치는 재순환 유동이 형성되었다. $CO_2$소화제 노즐수를 4개 이상 증가시킬 경우는 0.36이하의 등농도선대가 확장 또는 수축되었다. 따라서 $CO_2$ 소화장치 설계 시 적정한 소화제노즐수와 노즐배열을 고려해야 할 것으로 생각된다.

급결제 종류에 따른 광산 차수재의 특성 연구 (Study on the characteristic of liner and cover material by accelerating agent type)

  • 조용광;남성영;이용무;김춘식;서신석;조성현;이형우;안지환
    • 한국환경과학회지
    • /
    • 제27권2호
    • /
    • pp.75-81
    • /
    • 2018
  • At present research on mining backfill materials is being carried out to prevent ground subsidence and breaking by underground cavern of exhausted mines. However, backfill materials can cause secondary environmental issues such as ground pollution. To solve these issues, liner and cover materials are constructed before backfill materials constructed, to inhibit toxic substances form moving to the surroundings. Liner and cover materials, however, should have an accelerating performance after construction and when the accelerating performance is degraded, the work efficiency can be lowered, and the construction cost can be increased, by many rebound content. Therefore, this study develops mining liner and cover materials, and evaluates their accelerating performance and physical properties of liner and cover materials by types and content of accelerating agent. In case of aluminate accelerating agent, it is mixed with more than 5% of liner and cover materials(binder/ratio); thus an accelerating performance satisfying Korean Industrial Standards(KS) occurs, and in case of alkali-free accelerating agent, when it is mixed with more than 7%(binder/ratio), accelerating performance satisfying KS occurs. The more the accelerating agent capacity increases, the more compressive strength decreases. In addition, it is confirmed that compressive strength of aluminate accelerating agent is more degraded than compressive strength of the alkali-free accelerating agent. It is also confirmed that drying shrinkage stability of the alkali-free accelerating agent is better than the drying shrinkage stability of the aluminate accelerating agent.

Effects of Co-agent Type and Content on Curing Characteristics and Mechanical Properties of HNBR Composite

  • Lee, Young Seok;Ha, KiRyong
    • Elastomers and Composites
    • /
    • 제55권2호
    • /
    • pp.95-102
    • /
    • 2020
  • Currently, peroxide cure is a widely used cure system for rubber materials. To improve its effectivity, co-agents are used to enhance the peroxide efficiency and mechanical properties of rubber materials. Co-agents are multifunctional organic compounds that are highly reactive towards free radicals. These co-agents provide higher cross-link densities for a given peroxide concentration and improve the mechanical properties of peroxide-cured rubber composites. In this study, trimethylolpropane trimethacrylate (TMPTMA) and high vinyl 1,2-polybutadiene (HVPBD) were used as co-agents. In order to obtain a concentration that achieves a favorable balance between mechanical properties and co-agent concentration, this research investigated the effects of co-agent content on the curing characteristics, chemical structures, and mechanical properties of HNBR composites. Additionally, the heat aging properties and compression sets of HNBR composites were investigated. Based on the results, we found that the HNBR composites with TMPTMA co-agents exhibited higher Shore A hardness and 10% modulus and better heat aging resistance and compression set than that of the HVPBD co-agent. The heat aging resistance and compression set deteriorated with increasing HVPBD content.

Gadolinium-Chlorin is Potentially a New Tumor Specific MRI Contrast Agent

  • Kim Jong-Ki;Kim Dong-Myung;Kang Min-Suk;Kim Hae-Kyung;Kim Jeong-Sook;Yu Eun-Kyung;Jeong Jin-Hyun
    • Archives of Pharmacal Research
    • /
    • 제29권3호
    • /
    • pp.188-190
    • /
    • 2006
  • In this study, a newly-synthesized metalloporphyrin, Gd-chlorin (PB Chlorin), was investigated by using a simple tissue phantom to test its efficacy as an MRI contrast agent. This study demonstrated the potential activity of Gd-chlorin as not only a MRI contrast agent, but also as a PDT photosensitizer by using a simple tissue phantom and conducting a very brief MRI experiment.

공침법에 의한 Nickel Ferrite의 분말제조에서 pH-조절제 및 공침물-세척제의 영향 (Effects of pH Control Agent and Co-Precipitate Washing Agent on Nickel Ferrite Preparation by Co-Precipitation Method)

  • 정홍호;성기웅
    • 한국재료학회지
    • /
    • 제10권6호
    • /
    • pp.445-449
    • /
    • 2000
  • 가압 경수형 원자로 (pressurized light water reactor) 냉각재 계통 내의 주된 분식 생성물로 알려져 있는 nickel ferrite의 거동에 대해 고찰하기 위해 모의 nickel ferrite($Ni_{0.75}Fe_{2.25}O_4$)를 공침법으로 제조하였다. 수용액-pH-조절로는 am-monia 또는 potassium carbonate를, 공침물-세척제는 ammonia 수용액이나 potassium carbonate 수용액 또는 2차 증류수를 사용하였다. Nickel ferrite의 생성 및 수용액-pH-조절제와 공치물-세척제가 최종 생성물의 Ni-Fe 몰 비에 따른 수율 및 특성에 미치는 영향은 EDX, XPS, XRD 및 SEM으로 고찰하였다. 반응 전.후 Ni/Fe 몰 비에 따른 수율은, pH를 potassium carbon-ate로 조절한 후 2차 증류수로 공침물을 세척한 경우가 0.994로 가장 높이 나왔으며, pH-조절제로 potassium carbonate를 사용한 경우가 ammonia를 사용한 경우에 비해 높은 수율을 나타냈다. 이러한 차이는 공침 시에 수용액 내에서 ammonia가 보여주는 상대적으로 큰 $Na_{2+}{\leftarrow}NH_3$ 착화 효과와 더불어 공침물-세척제의 pH에 기인하는 것으로 해석하였다.

  • PDF

Sulfuric Acid Leaching of Valuable Metals from Spent Petrochemical Catalyst using Hydrogen Peroxide as a Reducing Agent

  • Park, Kyung-Ho;Sohn, Jeong-Soo;Kim, Jong-Seok
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.478-481
    • /
    • 2001
  • The spent petrochemical catalyst used in the manufacturing process of terephthalic-acid contains valuable metals such as cobalt and manganese. To recover these metals, sulfuric acid leaching was performed with hydrogen peroxide as a reducing agent. Low extractions of Mn, Co and Fe were obtained by sulfuric acid leaching without reducing agent. With adding hydrogen peroxide as a reducing agent, the high extraction of these metals could be obtained. Different from general leaching experiment, the extraction rates of metal components were decreased with increasing reaction temperature in this case. Under the optimum condition, the extraction rates of Mn, Co and Fe were 93.0%, 87.0% and 100% respectively.

  • PDF

도금 전처리공정에서 맞춤형 알칼리계 탈지제 개발 (Development of Alkaline Degreasing Agent for Electroplating Pretreatment Process)

  • 이승범;정구형;이재동
    • 공업화학
    • /
    • 제21권3호
    • /
    • pp.301-305
    • /
    • 2010
  • 본 연구에서는 도금전처리 공정에서 사용되는 다양한 조성의 맞춤형 알칼리계 탈지제를 개발하고, 탈지제의 수명을 예측함으로 효율을 높임과 동시에 공정품의 불량을 줄이고자 하였다. 알칼리계 탈지제는 침지형 탈지제로 NaOH, $Na_2CO_3$, $Na_2SiO_3$, SLS 등을 일정비율로 첨가하여 제조하였으며, 제조된 탈지제의 성능평가를 위해 알칼리계 탈지액의 온도를 $40{\sim}50^{\circ}C$로 설정하여 30~40 min 동안 오염된 철 시편을 넣은 후 오염물을 제거하였다. 오염물이 제거된 시편은 물방울 맺힘실험과 Hull-cell 도금분석을 통해 탈지제의 성능 및 수명을 확인하였다. 최적 탈지제의 조성은 NaOH (30 g/L) + SLS (6.0 g/L) + $Na_2SiO_3$ (2.0 g/L) + $Na_2CO_3$ (40 g/L)을 추천할 수 있으며, 물방울맺힘 실험과 Hull-cell 도금 분석 결과 최적 탈지조건은 $50^{\circ}C$, 35 min인 것으로 나타났다.

LIPID-SOLUBLE VC DERIVATIVE ASCORBIC ACID TETRA-2-HEXYLDECANOATE (VC-IP) AS AN ANTI-AGING AGENT

  • Obayashi, K.;Ochiai, Y.;Ochiai, Y.;Masaki, H.;Kurata, Y.
    • 대한화장품학회:학술대회논문집
    • /
    • 대한화장품학회 2003년도 IFSCC Conference Proceeding Book I
    • /
    • pp.313-319
    • /
    • 2003
  • It is well known that ascorbic acid (VC) is an important factor for several physiological reactions. In the skin, VC works as an anti-aging agent due to removing of oxidative stress generated by UV irradiation and stimulation of collagen synthesis. Thus, developing more effective VC derivatives is an important issue in creating anti-aging skin care products. Our study succeeded to develop a novel ascorbic acid derivative, ascorbic acid tetra-2-hexyldecanoate (VC-IP), which is a lipid-soluble pro-VC. The purpose of this study was to indicate the effects of VC-IP as pro-VC and anti-aging agent. First, it was examined whether VC-IP is converted to VC in physiological conditions. Since VC was detected from the cell extracts treated with VC-IP, it was indicated that VC-IP is a pro- VC.(omiited)

  • PDF

진화계산 기반 인공에이전트를 이용한 교섭게임 (Bargaining Game using Artificial agent based on Evolution Computation)

  • 성명호;이상용
    • 디지털융복합연구
    • /
    • 제14권8호
    • /
    • pp.293-303
    • /
    • 2016
  • 근래에 진화 연산을 활용한 교섭 게임의 분석은 게임 이론 분야에서 중요한 문제로 다루어지고 있다. 본 논문은 교섭 게임에서 진화 연산을 사용하여 이기종 인공 에이전트 간의 상호 작용 및 공진화 과정을 조사하였다. 교섭게임에 참여하는 진화전략 에이전트들로서 유전자 알고리즘(GA), 입자군집최적화(PSO) 및 차분진화알고리즘(DE) 3종류를 사용하였다. GA-agent, PSO-agent 및 DE-agent의 3가지 인공 에이전트들 간의 공진화 실험을 통해 교섭게임에서 가장 성능이 우수한 진화 계산 에이전트가 무엇인지 관찰 실험하였다. 시뮬레이션 실험결과, PSO-agent가 가장 성능이 우수하고 그 다음이 GA-agent이며 DE-agent가 가장 성능이 좋지 않다는 것을 확인하였다. PSO-agent가 교섭 게임에서 성능이 가장 우수한 이유를 이해하기 위해서 게임 완료 후 인공 에이전트 전략들을 관찰하였다. PSO-agent는 거래 실패로 인해 보수를 얻지 못하는 것을 감수하고서라도 가급적 많은 보수를 얻기 위한 방향으로 진화하였다는 것을 확인하였으며, 반면에 GA-agent와 DE-agent는 소량의 보수를 얻더라도 거래를 성공시키는 방향으로 진화하였다는 것을 확인하였다.