• 제목/요약/키워드: Co-Cr-Mo

검색결과 211건 처리시간 0.029초

툴 재료가 마찰교반접합된 409 스테인리스강의 부식 특성에 미치는 영향 (Effects of Tool Materials on Corrosion Properties of Friction Stir Welded 409 Stainless steel)

  • 안병욱;최돈현;송건;연윤모;이원배;이종봉;정승부
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2009년 추계학술발표대회
    • /
    • pp.42-42
    • /
    • 2009
  • 마찰교반접합 (Friction Stir Welding)은 1991년 영국 TWI에서 개발된 접합 법으로서 회전하는 툴이 재료내부에 삽입되면 툴과 재료사이에서 발생하는 마찰열에 의하여 온도가 상승하게 되어 재료는 연화되고, 이러한 재료 내부에서 회전하는 툴이 이동하게 되면 재료 내부는 기계적 교반에 의해 소성변형이 일어남과 동시에 접합이 이루어진다. 마찰교반접합은 동적 재결정에 의한 접합부의 미세한 결정립 형성으로 인하여 기계적 특성이 향상되며 보호 가스가 필요 없어 친환경적임과 동시에 용융 용접 법에 비해 접합 시 에너지 소모가 적으며 또한 접합 후 접합부에서의 변형이 상대적으로 적다는 장점이 있다. 이러한 장점을 가진 마찰교반접합은 알루미늄 합금, 마그네슘 합금 그리고 동 합금과 같은 저 융점 비철재료에 많은 연구와 적용 사례들이 있어왔다. 하지만 최근에는 일반 탄소강, 연강, 오스테나이트계 스테인리스강, 니켈 합금, 티타늄 합금과 같은 고융점 재료에도 연구 및 적용이 진행되고 있는 추세이다. 페라이트계 스테인리스강은 가격이 비싼 Ni을 함유하지 않아 오스테나이트계 스테인리스강에 비하여 강재의 가격은 낮으면서도 고온특성 및 내식성이 우수하여 건축용, 자동차 배기계용으로 널리 사용되고 있다. 하지만 이런 장점을 가진 페라이트계 스테인리스강을 기존의 용융 용접 법으로 접합 시 용접부 및 열영향부에서의 결정립의 조대화로 인한 인성 및 연성이 저하되며, 특히 예민화된 열영향부 입계 내에 Cr 탄화물이 석출되어 입계주변에 Cr 결핍 층을 형성되어 입계부식이 발생되는 문제점이 발생된다. 본 연구에서는 마찰교반접합을 이용하여 두께 3mm의 409 스테인리스강에 대해 맞대기 접합을 실시하였다. 접합 변수를 툴의 재료 (WC-12wt%Co, $Si_3N_4$)로 하여 접합을 실시하였고 접합 후 외관상태 점검, 광학 현미경과 주사 전자 현미경을 통하여 미세조직을 관찰하였으며 황산-황산동 부식 시험을 실시하여 접합부의 부식 특성을 평가하였다.

  • PDF

$\textrm{Fe}_{80-x}\textrm{P}_{10}\textrm{C}_{6}\textrm{B}_{4}\textrm{M}_{x}$(M=Transition Metal) 비정질합금의 열적안정성 (Thermal Stability of $\textrm{Fe}_{80-x}\textrm{P}_{10}\textrm{C}_{6}\textrm{B}_{4}\textrm{M}_{x}$(M=Transition Metal) Amorphous Alloys)

  • 국진선;전우용;진영철;김상협
    • 한국재료학회지
    • /
    • 제7권3호
    • /
    • pp.218-223
    • /
    • 1997
  • 과냉각액체구역(${\Delta}T_{x}=T_{x}-T_{g}$)을 갖는 $Fe_{80}P_{10}C_{6}B_{4}$ 조성에 천이금속(Ti, Zr, Hf, V, Nb, Ta, Cr, Mo, W, Mn, Co, Ni, Pd, Pt및 Cu)를 첨가하여 이들 원소가 유리화온도($T_{g}$), 결정화온도($T_{x}$) 및 과냉액체구역 (${\Delta}T_{x}$)에 미치는 영향에 \ulcorner여 조사하였다. $Fe_{80}P_{10}C_{6}B_{4}$ 합금의 ${\Delta}T_{x}$ 값은 27K였으나 이 합금에 Hf, Ta 및 Mo을 각각 4at%첨가하면 그 값이 40k 이상으로 증가하였다. 이같은 ${\Delta}T_{x}$ 값의 증가는 유리화온도($T_{g}$의 상승보다 결정화온도($T_{x}$)의 상승폭이 크기 때문이다. $T_{g}$$T_{x}$는 외각전자밀도(e/a)가 약 7.38에서 7.05로 감소할수록 상승하였다. e/a의 감소는 천이금속과 다른 구성원소(반금속)사이의 상호결합상태를 의미한다. 즉 $T_{g}$$T_{x}$의 상승은 강한 상호결합력에 기인하는 것으로 사료된다.

  • PDF

울산 광산의 철-텅그스텐 스카른화작용 (Magnetite and Scheelite-Bearing Skarns in Ulsan Mine, Korea)

  • 최선규;이마이 나오야
    • 자원환경지질
    • /
    • 제26권1호
    • /
    • pp.41-54
    • /
    • 1993
  • 경상분지 남동부에 위치한 울산광산은 석회암을 교대한 전형적인 calcareous skarn강상으로 Fe W광화작용 이외에도 Cu, Pb, Zn, As, Bi, Ni, Co, Cr, Ag, Sn, In, Te, Sb 등이 수반되는 다금속광화작용의 특성을 보여주고 있다. 본 광상은 직립에 가까운 파이프상 광체로 산출되며, 자철석과 함께 북측의 혼펠스와의 경계부근에 회중석이 부분적으로 광염되어 있다. 본 광상의 스카른대는 석회암 및 혼펠스를 교대한 괴상 스카른과 양자를 각기 절단하는 맥상스카른으로 구분된다. 괴상스카른은 석회암 기원의 스카른이 주체를 이루며, 이러한 스카른대는 규회석 스카른, 석류석 스카른, 단사휘석-석류석 스카른, 단사휘석 스카른으로 분류되며, 부분적으로 스카른대 주변부를 따라 거정질 방해석대가 존재하고 있다. 스카른 진화과정은 초기스카른 및 후기스카른의 두 시기로 분류되며, 초기스카른은 prograde한 스카른 생성시기로 초기에는 규회석, Mg-rich 단사휘석, Al-rich garnet가 주로 정출되며 광석광물은 거의 불모한 시기이나, 초기스카른의 말기로 진행됨에 따라 자철석과 회중석이 정출된다. 그리고, 후기스카른의 전반기까지는 Fe-rich 단사휘석, Fe-rich garnet와 함께 자철석 회중석이 연속적으로 정출되었으나, 후기스카른의 중기부터는 Ni, Co, As, Cu, Zn, Fe, Bi 등의 황화광물이 정출되는 다금속광화 작용의 특정을 보인다. 또한, 최후기 열수작용시기에는 섬아연석과 방연석 등의 Base-metal 황화광물이 주로 정출되는 연 아연 광화작용의 양상을 나타낸다. 이러한 각 광화시기별 스카른 광물과 광석광물의 변화양상은 고온의 열수용액이 천부로 유출되는 과정에서 광화용액의 온도가 급격히 떨어진 결과 (telescope)에 기인된 것으로 사료된다.

  • PDF

소듐과 이산화탄소 반응에 의한 소듐유로막힘 및 재료손상 현상 연구 (Investigation of Plugging and Wastage of Narrow Sodium Channels by Sodium and Carbon Dioxide Interaction)

  • 박선희;민재홍;이태호;위명환
    • Korean Chemical Engineering Research
    • /
    • 제54권6호
    • /
    • pp.863-870
    • /
    • 2016
  • 본 논문의 목적은 소듐냉각고속로(sodium cooled fast reactor, SFR)와 초임계 $CO_2$ Brayton cycle의 연계 시, 원자로 열수송 계통과 동력변환 계통의 압력 경계를 형성하는 회로인쇄형 열교환기의 경계면에 균열이 발생해 고압(약 200 bar)의 $CO_2$가 상압 수준의 액체소듐유로 측에 유입되었을 때의 물리/화학적 현상을 파악하여 열교환기 설계에 활용 가능한 실험 자료를 생산하는 것이다. 열교환기의 소듐-$CO_2$ 경계면 균열 현상은 경계면의 균열 크기에 따라 미세 균열에 의한 소듐유로막힘(plugging) 현상과 상대적으로 큰 균열에 의한 열교환기 재료손상(wastage) 현상으로 나뉜다. Plugging 실험결과, 소듐유로 직경이 3mm일 때 $CO_2$ 주입 즉시 소듐 흐름이 정지한 반면 소듐유로 직경이 5 mm일 때는 유량이 감소되기 시작하는 시점은 3 mm의 경우와 유사하게 $CO_2$ 주입 즉시 나타났지만 소듐의 흐름이 완전히 정지할 때까지는 상대적으로 오랜 시간이 소요되었다. 이러한 실험결과는 실제 열교환기의 소듐-$CO_2$ 경계면에서 미세균열이 발생했을 때, 소듐유로 직경이 3 mm로 좁을 경우 균열 발생과 동시에 해당 소듐유로가 반응생성물에 의해 막혀 해당 유로 외의 유로들로 지속적인 열교환기 운전이 가능하지만, 소듐유로의 직경이 5 mm로 넓어질 경우 소듐유로가 고체생성물에 의해 즉시 막히지 않고 생성물이 소듐유로를 따라 계통 내부를 이동하다 일정 농도 이상이 되어야 소듐유로를 막게 할 것으로 예상할 수 있는 결과이다. Wastage 실험결과, 열교환의 재질(STS316, Inconel600, G91 합금강), 운전온도($400{\sim}500^{\circ}C$), 노즐직경(0.2~0.8 mm), 시편-노즐 거리(2~6 mm)와 무관하게 고압(약 200~250 bar)의 $CO_2$ 분사에 의한 시편의 물리적 손상(erosion) 현상은 발생하지 않았다. 노즐에서의 분사되는 $CO_2$의 분사속도는 마하 0.4~0.7인 것으로 확인되었다. 본 연구의 실험결과는 열교환기 파손 대처 설계에 배경 실험 자료로 활용될 것으로 기대된다.

Gap comparison between single crown and three-unit bridge zirconia substructures

  • Anunmana, Chuchai;Charoenchitt, Masnisa;Asvanund, Chanavut
    • The Journal of Advanced Prosthodontics
    • /
    • 제6권4호
    • /
    • pp.253-258
    • /
    • 2014
  • PURPOSE. To compare marginal and internal gaps of zirconia substructure of single crowns with those of three-unit fixed dental prostheses. MATERIALS AND METHODS. Standardized Co-Cr alloy simulated second premolar and second molar abutments were fabricated and subsequently duplicated into type-III dental stone for working casts. After that, all zirconia substructures were made using $Lava^{TM}$ system. Marginal and internal gaps were measured in 2 planes (mesial-distal plane and buccal-palatal plane) at 5 locations: marginal opening (MO), chamfer area (CA), axial wall (AW), cusp tip (CT) and mid-occlusal (OA) using Replica technique. RESULTS. There were significant differences between gaps at all locations. The $mean{\pm}SD$ of marginal gap in premolar was $43.6{\pm}0.4{\mu}m$ and $46.5{\pm}0.5{\mu}m$ for single crown and 3-unit bridge substructure respectively. For molar substructure the $mean{\pm}SD$ of marginal gap was $48.5{\pm}0.4{\mu}m$ and $52.6{\pm}0.4{\mu}m$ for single crown and 3-unit bridge respectively. The largest gaps were found at the occlusal area, which was $150.5{\pm}0.5{\mu}m$ and $154.5{\pm}0.4{\mu}m$ for single and 3-unit bridge premolar substructures respectively and $146.5{\pm}0.4{\mu}m$ and $211.5{\pm}0.4{\mu}m$ for single and 3-unit bridge molar substructure respectively. CONCLUSION. Independent-samples t-test showed significant differences of gap in zirconia substructure between single crowns and three-unit bridge (P<.001). Therefore, the span length has the effect on the fit of zirconia substructure that is fabricated using CAD/CAM technique especially at the occlusal area.

Evaluation of the health status of preschool children stratified based on the weight-length index (WLI)

  • Shin, Kyung-Ok;Chung, Keun-Hee;Park, Hyun-Suh
    • Nutrition Research and Practice
    • /
    • 제4권5호
    • /
    • pp.383-392
    • /
    • 2010
  • This study was conducted to prepare basic materials and offer advice regarding dietary habits to prevent and cure childhood obesity by comparing and analyzing dietary habit, nutritional status, blood factors, and mineral contents of hair. All subjects were stratified by their weight-length index (WLI). According to the standard WLI values, 64.9% of children were within the normal value, 13.5% of children were underweight, and 21.6% of children were overweight and obese (WLI ${\geq}$ 110%). Overall, the score assessed dietary habit for all children was $21.32{\pm}2.55$ point (921 subjects), with 5.1% of children having excellent dietary habits and 3.1% having poor dietary habits. Additionally, 37.9% of underweight children, 37.6% of normal weight children, and 43.2% of overweight and obese children consumed higher amounts of protein than underweight children did (meat, fish, eggs, and soy products) (P < 0.05). Overweight and obese children consumed more fried foods than underweight or normal weight children (P < 0.05). Moreover, 38.0% of the children had hemoglobin levels of 12 g/dl, while 7.6% were anemic (11.1 g/dl). When a hematocrit level of 33% was taken as the standard, 11.0% of children were anemic. The plasma transferrin content was $263.76{\pm}54.52$ mg/dl in overweight and obese children. The mean values of Fe, Cu, Ca, Cr, Mn, Se, Na, K, Li, V, Co, and Mo were within the reference values, but the Zn concentrations of underweight, normal weight, and overweight and obese children were $67.97{\pm}28.51$ ppm, $70.09{\pm}30.81$ ppm, and $73.99{\pm}30.36$ ppm, respectively. The Zn concentration of overweight and obese children ($73.99{\pm}30.36$ ppm) was lower than that of the standard value (180~220 ppm). Therefore, a nutritional education program and new guidance for dietary pattern should be developed to reduce the number of underweight and overweight and obese children.

Source Identification and Quantification of Coarse and Fine Particles by TTFA and PMF

  • Hwang, In-Jo;Bong, Choon-Keun;Lee, Tae-Jung;Kim, Dong-Sool
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제18권E4호
    • /
    • pp.203-213
    • /
    • 2002
  • Receptor modeling is one of statistical methods to achieve reasonable air pollution strategies. In order to maintain and manage ambient air quality, it is necessary to identify sources and to apportion its sources for ambient particulate matters. The main purpose of the study was to survey seasonal trends of inorganic elements in the coarse and fine particles. Second, this study has attempted emission sources qualitatively by a receptor method, the PMF mo-del. After that. both PMF (positive matrix factorization) model and TTFA (target transformation factor analysis) model were applied to compare and to estimate mass contribution of coarse and fine particle sources at the receptor. A total of 138 sets of samples was collected from 1989 to 1996 by a low volume cascade impactor with 9 size fraction stages at Kyung Hee University in Korea. Sixteen chemical species (Si, Ca, Fe, K, Pb, Na, Zn, Mg, Ba, Ni, V, Mn, Cr, Br, Cu. Co) were characterized by XRF. The study result showed that the weighted arithmetic mean of coarse and fine particles were 51.3 and 54.4 $\mu\textrm{g}$/㎥, respectively. Contribution of both particle fractions were esti-mated using TTFA and PMF models. The number of estimated sources was seven according to TTFA model and 8 according to PMF model. Comparison of TTFA and PMF revealed that both methodologies exhibited similar trends in their contribution pattern. However, large differences between contributions were observed in some sour-ces. The results of this study may help to suggest control strategies in local countries where known source profiles do not exist.

슈퍼 듀플렉스 스테인리스강 UNS S32750의 FCA 용접 후 열처리가 공식에 미치는 영향 (Heat Treatment Effect on Pitting Corrosion of Super Duplex Stainless Steel UNS S32750 FCA Welds)

  • 장복수;문인준;김세철;고진현
    • Journal of Welding and Joining
    • /
    • 제31권5호
    • /
    • pp.20-25
    • /
    • 2013
  • This study was carried out to investigate the influence of a sigma phase precipitation on the pitting corrosion resistance and microstructural change of super duplex stainless steels(UNS S32750). The welds made by FCAW (Flux Cored Arc Welding) were heat treated ($930^{\circ}C$, $1080^{\circ}C$, $1230^{\circ}C$) and quenched. Based on the microstructural examination, it was found that the ${\sigma}$ phase was formed in base metals and welds heat treated at $930^{\circ}C$ while there were little ${\sigma}$phases formed in base metals and weld metal experienced the relatively fast cooling from $1080^{\circ}C$ and $1230^{\circ}C$. On the other hand, the most weight loss due to pitting corrosion occurred in base and weld metals heat treated at $930^{\circ}C$. It was confirmed that the pitting corrosion occurred in the phase boundaries of ferrite/sigma and austenite/sigma. The pitting corrosion resistance decreased owing to an increase in Cr, Mo depleted areas adjacent to the intermetallic phases such as ${\sigma}$phases. The hardness was greatly increased due to the precipitation ${\sigma}$phases.

유지요소의 크기와 형태가 간접복합레진과 금속간의 결합강도에 미치는 영향 (THE EFFECT OF SIZE AND SHAPE OF RETENTION ELEMENT ON COMPOSITE TO METAL BOND STRENGTH)

  • 이윤정;전영찬;정창모
    • 대한치과보철학회지
    • /
    • 제45권5호
    • /
    • pp.665-674
    • /
    • 2007
  • Purpose: The purpose of this study was to investigate the effect of sire and shape of retention element on the bond strength of indirect composite resin and metal. Material and method: The metal disk specimens, each 6mm in diameter, were cast from CrCo alloy. They were divided into 8 groups by applied retention element. retention bead group $B2\;({\phi}\;0.2mm),\;B4\;({\phi}\;0.4mm),\;B6\;({\phi}\;0.6mm),\;B8\;({\phi}\;0.8mm)$, retention crystal group C2 (0.2mm), C5 (0.5mm), C8 (0.8mm) and sandblasting group SB ($110{\mu}m\;Al_2O_3$ blasting) as control. Eighty-eight metal specimens were veneered with $TESCERA^{(R)}$ Indirect resin system. One specimen of each group was sectioned and the resin-metal bonding pattern at the interface was observed under measuring microscope. Other specimens were then tested for tensile bond strength on an Instron universal testing machine at a crosshead speed of 2mm/min. Results: 1. Compared to sandblasting, beads or crystals increased the resin-metal bond strength (P<.05). 2. 0.2mm retention crystals were most effective in improving the resin-metal bond strength (P>.05). 3. 0.2mm beads showed the highest bond strength among retention bead groups, but there was no statistically significant difference (P>.05). 4. Retention crystals tend to be higher in bond strength than retention beads due to wider surface area. 5. The larger retention element, the larger the undercut for the mechanical retention, but the gap at resin-metal interface was also increased. Conclusion: Within the limitations of this study, 0.2mm retention crystals were most effective in improving the resin-metal bond strength.

Mathematical Models of Competitive Adsorption of Inorganic Anions in Soils

  • Lee, Kyo Suk;Lee, Dong Sung;Lee, Jae Bong;Joo, Rhee Na;Lee, Myong Yun;Chung, Doug Young
    • 한국토양비료학회지
    • /
    • 제48권6호
    • /
    • pp.666-670
    • /
    • 2015
  • Competition among anion species in solution for same sorption sites and soil surface can be of major significance in determining the effective mobility of any potentially adsorbing species. Major soil anion species include $OH^-$, $F^-$, $Cl^-$, $HCO_3{^-}$, $CO_3{^-}$, $NO_3{^-}$, $SO_4{^{2-}}$, and $PO_4{^{3-}}$. And some micro nutrients such as boron and molybdenum exist as $H_2BO_3{^-}$ and $MoO_4{^{2-}}$, as do some heavy metals such as chrome and arsenic as $CrO_4{^{2-}}$ and $HAsO_4{^{2-}}$. Pesticides such as 2,4,5-T and 2,4-D also exist as anions. Many anion species are retained by more complex mechanisms than the simple electrostatic attractions involved in most cation adsorption reactions. In binary system composed of two anions, the adsorption of one anion is influenced by the other anion due to the competition for the available and limited binding sites in soil constituents. The specifically adsorbed anions may compete more effectively for sorption sites than that of nonspecifically adsorbed anion. In this study, we aim to evaluate the mathematical models to determine the magnitude of concentration variations in adsorption due to competitive interactions between anions introduced to a system in binary mixtures.