• 한국자기학회지
• /
• 제9권5호
• /
• pp.256-262
• /
• 1999

DC/RF magnetron sputtering system을 이용하여 CoCr 박막 및 CoCrMo 박막의 Si 하지층의 도입에 따른 자기적 특성 및 미세구조의 변화에 대해 살펴보았다. 박막의 자기적 특성을 VSM을 통하여 측정한 결과, 고온에서 증착된 CoCrMo/Si 박막의 경우가 CoCr/Si 박막과는 달리 Si 하지층의 두께가 증가할수록 수직보자력값이 증가하는 것을 알 수 있었으며 AFM과 SEM을 이용한 surface morphology의 변화를 통하여 결정립 미세화와 균일화가 수직보자력을 증진시킴을 알 수 있었다. 또한, 박막의 결정배향성 및 미세구조를 XRD와 SEM을 통하여 관찰한 결과, CoCrMo/Si 박막의 (0002)우선 배향성이 CoCr/Si 박막의 (0002) 우선 배향성보다 상당히 크게 증진된 것을 볼 수 있었으며, SEM의 단면 측정을 통하여 CoCrMo/Si 박막과 CoCr/Si 박막의 기판 표면에서 성장하는 columnar 구조의 발달을 잘 관찰할 수 있었다.

• Tribology and Lubricants
• /
• 제38권4호
• /
• pp.162-169
• /
• 2022

Cobalt-chromium (CoCr)-based alloys have been used for wear applications because of their excellent mechanical properties and wear resistance. With growing concern over environmental problems, CoCr alloys are expected to be used for various tribological applications in degraded lubrication states. To expand the applicability of the materials, data should be accumulated across a broad spectrum of experimental parameters. In this work, the friction and wear characteristics of cobalt-chromium-tungsten (CoCrW) and cobalt-chromium-molybdenum (CoCrMo) alloys are investigated experimentally. The tests are conducted using a pin-on-reciprocating-plate tribotester in dry lubrication. CoCrW and CoCrMo are used as pin and plate materials to investigate the effect of the counter material. The results show that the friction coefficients between CoCrW and CoCrMo generally range from 0.4 to 0.5. The friction coefficient between the CoCrW pin and plate is found to be slightly small. However, the total wear between the CoCrW pin and plate is found to be the largest. In contrast, the total wear between the CoCrW pin and plate is relatively small. Furthermore, CoCrW may cause a faster wear progression of CoCrMo, especially for the case in which CoCrMo is used as the pin material. The results of this work provide a better understanding of the tribological properties of CoCrW and CoCrMo alloys. In addition, this work provides a practical guideline for the use of CoCrW and CoCrMo from the tribological design viewpoint.

• 한국자기학회지
• /
• 제9권4호
• /
• pp.203-209
• /
• 1999

CoCrTa/Cr 자성박막의 Cr 하지층에 Mo와 Si을 첨가하여 제조한 박막의 자기적 성질에 미치는 Mo와 Si의 영향에 대하여 조사하였다. 증착시 사용된 장비는 DC magnetron sputtering system이었고, CoCrTa 자성층의 두께는 30.0$\AA$으로 Cr 하지층의 두께는 700$\AA$으로 고정하였으며 기판의 가열온도는 26$0^{\circ}C$이었다. CrMo 하지층의 박막이 순수한 Cr 하지층에 비하여 약 200 Oe의 보자력 증가를 나타내었다. 하지만 Si을 첨가하였을 경우엔 첨가량의 증가에 따라 보자력이 점차 감소하는 것으로 나타났다. CrMo 하지층에서는Mo를 첨가함에 따라 Cr 하지츠의 (200)면의 결정배향성이 증가하였고, Mo를 첨가한 Cr(200)과 CoCrTa(110)의lattice misfit가 Si을 첨가한 경우보다 작았고, 이것이 보자력 증가의 원인이었다.

• 한국자기학회지
• /
• 제3권4호
• /
• pp.320-324
• /
• 1993

스퍼터된 자기기록매체 Co-10at%Cr-2at%Mo/Cr 자성박막의 제조조건이 미세구조와 자기적특성에 미치는 영향을 조사하였다. 기판의 온도는 상온-$250^{\circ}C$로 하였으며 Cr하지층과 CoCrMo층의 두께는 각각 $1000-2500\AA$, $300-800\AA$이었다. CoCrMo층의 두께가 $500{\AA}-800{\AA}$ 증가함에 따라 결정립은 미세화 되었으며 균일한 조직을 나타냈다. 보자력은 기판의 온도, CoCrMo자성층, Cr하지층의 두께 를 증가시켰을때 향상되었다. 기판온도가 $250^{\circ}C$, 자성층의 두께가 $700\AA$, Cr 하지층의 두께가 $1000\AA$일때 880 Oe의 보자력을 나타냈다.

• 산업기술연구
• /
• 제21권A호
• /
• pp.221-229
• /
• 2001

The effect of Mo underlayer on the magnetic properties of CoCrTa/Cr films deposited on glass substrates were investigated. The coercivity increased and the coercivity squareness decreased by introducing Mo underlayer. The coercivity increase was attributed to the increase of in-plane c-axis orientation and magnetic isolation of Co grains deposited on Cr/Mo underlayer. The decrease of coercivity squarenesses seemed to be caused by the increase of magnetic isolation. The increase of magnetic isolation of Co grains was attributed to the diffusion of Mo atoms into grain boundaries of Co films and the physical isolation of Co grains. The coercivity of CoCrTa/Cr/Mo showed maximum values at Mo thickness of $400{\AA}$. The appearance of the maximum coercivity at that thickness was attributed to the development of strong $Co(10{\bar{1}}0)$ and $Co(10{\bar{1}}1)$ preferred orientation.

• 한국자기학회지
• /
• 제3권3호
• /
• pp.221-228
• /
• 1993

고밀도기록용 박막재료로서의 충족조건은 높은 보자력, 높은 포화자화, 생산성, 그리고 화학적 안정성으로써 수직자기기록매체 CoCrMo 자성박막을 RF 스퍼터링 방법으로 제조한 후, 부식 특성을 전기화학적 측정, acceleration corrosion test 및 부식후 박막의 표면분석을 통하여 조사 하였다. CoCrMo 박막의 부식특성은 스퍼터링 조건에 따라서 다르게 나타났으며, Mo의 함량이 증가 할수록 내식성은 향상되었다. 전기화학부식실험 결과 박막의 Mo 함량이 증가할수록 뚜렷한 활성- 불활성 전이를 나타내었으며 부동태전류밀도의 감소를 나타내었다. Accelerated corrosion test에 서 CoCrMo 박막의 부식은 전기화학반응에 의하여 일어났으며 Mo첨가에 따라 부식이 일어난 곳의 수는 감소하였다. AES분석결과 부식 장소에는 많은 양의 $Cl_{-}$ 이온이 존재하였고, Cr의 고갈이 부식의 원인이었다.

• 한국표면공학회지
• /
• 제51권3호
• /
• pp.139-148
• /
• 2018

In this study, surface analysis of Ni-Cr and Co-Cr alloys with addition of Ti and Mo for dental CAD/CAM use has been researched experimentally. The surface characteristics of the alloys were examined by Vickers hardness test, bonding strength test, surface roughness test, field-emission scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction spectroscopy. The shrinkage of the sintered Ni-Cr alloy alloy was slightly larger than that of Ni-Cr-Ti alloy, and larger than Co-Cr alloy. Also, the addition of Mo showed a tendency to decrease shrinkage somewhat. From the result of XRD analysis, NiCr, $Ni_3Cr$ and $Ni_3Ti$ were observed in the sintered Ni-13Cr-xTi and Ni-13Cr-xMo alloys. In addition, ${\sigma}-CrCo$, $Co_2Mo_3$ and $TiCo_2$ were formed in the sintered Co-Cr-xTi and Co-Cr-xMo alloys. Surface hardness of Ti and Mo added alloy was higher than those of Ni-Cr and Co-Cr alloy. The bond strength between sintered alloy and porcelain was $16.1kgf/mm^2$ for Ni-13Cr alloy, $17.8kgf/mm^2$ for Ni-13Cr-5Ti alloy, and $8.2kgf/mm^2$ for Ni-13Cr-10Ti alloy, respectively.

• 한국정밀공학회지
• /
• 제25권3호
• /
• pp.56-62
• /
• 2008

The biocompatibility and the fatigue strength of Co-Cr-Mo alloy are excellent, so it is used well for the material of artificial joints. The head of artificial joint needs mirror surface for reduction of abrasive resistance. Mirror finishing of Co-Cr-Mo alloy with geometrically defined single crystal diamond cutting tools is handicapped by micro chipping of tool edge. In general, it is said that the micro chipping of diamond tool is caused by work hardening of Co-Cr-Mo alloy for the cut. In the present research, mirror finishing of Co-Cr-Mo alloy by applying ultrasonic elliptical vibration cutting was carried out. The experimental results show that the micro chipping of diamond tool was suppressed and the tool wear was remarkably reduced as compared with the ordinary diamond cutting without elliptical vibration motion. It was confirmed that the good mirror surface of maximum surface roughness of 25 nmP-V was obtained for the cutting length of about 14 m. It is expected that mirror finishing of Co-Cr-Mo alloy can be achieved by applying ultrasonic elliptical vibration cutting practically.

• Journal of Magnetics
• /
• 제4권2호
• /
• pp.69-72
• /
• 1999

Magnetic properties and crystallographic structure of e-beam evaporated Co/Cr and Co/Mo multilayer thin films were investigated using VSM and XRD. Co/Cr and Co/Mo multilayer thin films are confirmed as an alternating layered structure. The structure of films with thicker Co layers than Cr and Mo layers are found to be a hcp structure with the c-axis perpendicular to the film plane. The direction of the film plane is the easy magnetization one. There is a no significant difference in shape of hysteresis loops between Co/Cr and Co/Mo multilayer films. It is found that Mo layer is more effective than Cr for preparing Co layer with c-axis normal to the film plane.

• 한국주조공학회지
• /
• 제27권3호
• /
• pp.120-125
• /
• 2007

The microstructure, mechanical properties and melting range of Ni-Cr-Mo based alloys were investigated to develop Be-free Ni-Cr-Mo base dental alloys for Porcelain-Fused-to-Metal Firing(PFM). All as-cast alloys showed dendritic structure. Rockwell hardness of 20Cr7Mo was increased with addition of Si and Ti. On the contrary, it was decreased with addition of Co. The duplex alloying elemental addition such as 3Co + xTi, 2Si + xCo and 2Si + xTi to 20Cr7Mo resulted in much increase of hardness. Rockwell hardness and compressive strength for 20Cr3CoSiTi or 17Cr6CoSiTi alloy that add Si-Ti had similar values compared to the commercial alloys. Melting range for 20Cr3CoSiTi and 17Cr6CoSiTi alloy that add Si-Ti showed similar or lower than commercial alloys. In conclusion, 20Cr3CoSiTi and 17Cr6CoSiTi alloys can be applied for commercial use.