• Journal of Mushroom
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2023

This study addresses the current demand of the Korean mushroom export industry to establish an export strategy and governing policies.The enoki mushroom exports increased by 89% in 2009 and 23% in 2010, resulting in the largest export volume (17,163 tons) and export value ($26,292,000) being recorded in 2010. In contrast, exports in 2020 yielded only $18,525,000, which was 29% lower than that in 2010. In case of king oyster mushrooms, exports increased by 10% in 2012, 13% in 2013, and 2% in 2014, maintaining a moderate-growth trend. Moreover, Korea's mushroom exports are focused on a few specific countries. Enoki mushrooms accounted for more than 50% of the total exports to North America and Vietnam from 2012 to 2022, whereas king oyster mushrooms accounted for more than 50% of the total exports to Europe and North America (USA and Canada) from 2009 to 2022. Another characteristic trend in Korean mushroom exports is the diversification of export markets. The number of countries importing enoki mushrooms and king oyster mushrooms from Korea is increasing.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.2
• /
• pp.231-238
• /
• 2023

Since there is a limit to the physically visible horizon that sensors for autonomous driving can perceive, complementary utilization of digital map data such as a Local Dynamic Map (LDM) along the probable route of an Autonomous Vehicle (AV) is proposed for safe and efficient driving. Although the amount of digital map data may be insignificant compared to the amount of information collected from the sensors of an AV, efficient management of map data is inevitable for the efficient information processing of AVs. The objective of this study is to analyze the efficiency of information use and information processing time of AV according to the expansion of the active section of LDM-based static road and traffic information. To carry out this objective, a microscopic simulator model, VISSIM and VISSIM COM, was employed, and an area of about 9 km × 13 km was selected in the Busan Metropolitan Area, which includes heterogeneous traffic flows (i.e., uninterrupted and interrupted flows) as well as various road geometries. In addition, the LDM information used in AVs refers to the real high-definition map (HDM) built on the basis of ISO 22726-1. As a result of the analysis, as the electronic horizon area increases, while short links are intensively recognized on interrupted urban roads and the sum of link lengths increases as well, the number of recognized links is relatively small on uninterrupted traffic road but the sum of link lengths is large due to a small number of long links. Therefore, this study showed that an efficient range of electronic horizon for HDM data collection, processing, and management are set as 600 m on interrupted urban roads considering the 12 links corresponding to three downstream intersections and 700 m on uninterrupted traffic road associated with the 10 km sum of link lengths, respectively.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.1
• /
• pp.67-74
• /
• 2023

In this study, for a natural cosmetics market, we sought to explore alternatives that can replace polyvinyl alcohol (PVA) of peel-off packs. A peel-off type pack was prepared by combining pullulan, a water-soluble polysaccharide, and other polysaccharides (sodium hyaluronate, cellulose gum, hydroxyethyl cellulose, sodium alginate, corn starch), and the pH, viscosity, and stability against temperature of each peel-off type pack were confirmed. The thickness and tensile strength of the manufactured film were measured for comparison with the PVA peel-off type pack, and applicability, drying speed, and removal degree were measured. Among them, the pullulan-sodium hyaluronate peel-off type pack showed excellent film formation ability to replace the peel-off type pack containing PVA with 5.12% thin film thickness and 4.23% high film tensile strength. When applied to actual skin, the degree of spread of the pack, the usability that can be uniformly applied, and the formation and removal strength of the film when removed after drying were also similar to the peel-off type pack containing PVA. Therefore, it was confirmed that the film formed of pullulan-sodium hyaluronate showed enough physical properties to replace the PVA of the peel-off type pack as a natural peel-off type pack.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.6
• /
• pp.71-82
• /
• 2006

One of the most popular pre-reinforcement methods of tunnel heading in cohesionless soils would be the fore-polling of grouted pipes, known as RPUM (reinforced protective umbrella method) or UAM (umbrella arch method). This technique allows safe excavation even in poor ground conditions by creating longitudinal arch parallel to the tunnel axis as the tunnel advances. Some previous studies on the reinforcing effects have been performed using numerical methods and/or laboratory-based small scale model tests. The complexity of boundary conditions imposes difficulties in representing the tunnelling procedure in laboratory tests and theoretical approaches. Full-scale study to identify reinforcing effects of the tunnel heading has rarely been carried out so far. In this study, a large scale model testing for a tunnel in granular soils was performed. Reinforcing patterns considered are four cases, Non-Reinforced, Crown-Reinforced, Crown & Face-Reinforced, and Face-Reinforced. The behavior of ground and pipes as reinforcing member were fully measured as the surcharge pressure applied. The influences of reinforcing pattern, pipe length, and face reinforcement were investigated in terms of stress and displacement. It is revealed that only the Face-Reinforced has decreased sufficiently both vertical settlement in tunnel heading and horizontal displacement on the face. Vertical stresses along the tunnel axis were concentrated in tunnel heading from the test results, so the heading should be reinforced before tunnel advancing. Most of maximum axial forces and bending moments for Crown-reinforced were measured at 0.75D from the face. Also it should be recommended that the minimum length of the pipe is more than l.0D for crown reinforcement.

• Journal of Life Science
• /
• v.33 no.4
• /
• pp.315-324
• /
• 2023

The underlying action of policosanol in lowering cholesterol level has not yet been clearly elucidated. Several recent studies have suggested that sterol regulatory element-binding proteins (SREBP)-1c play a role in the regulation of cholesterol synthesis via the fatty acid synthesis pathway. To date, no study has evaluated the effects of policosanol on SREBP-1c-mediated fatty acid synthesis. Therefore, this study aimed to investigate whether the SREBP-1c-mediated fatty acid biosynthetic pathway is associated with the cholesterol-lowering effects of policosanol. Seven-week-old C57BL/6 male mice were randomly divided into 7 groups (n=7 per group) and treated for 8 weeks as follows: 1) normal diet (normal control), 2) high-fat diet (HFD), 3) HFD+ethanol (Pol-0), 4) HFD+policosanol 1 mg/kg (Pol-1), 5) HFD+policosanol 2 mg/kg (Pol-2), 6) HFD+policosanol 4 mg/kg (Pol-4), and 7) HFD+simvastatin 50 ㎍/kg (positive control). Policosanol and simvastatin were administered at the same time every day while maintaining the HFD. Body weight and food intake were measured weekly for 8 weeks. After 8 weeks, serum cholesterol levels were measured, histological analysis was carried out, and the expressions of SREBP-1c and fatty acid synthase (FAS) in the liver tissues were examined. Policosanol reduced body weight and the amount of food intake in a dose-dependent manner. Serum cholesterol levels were significantly lowered in the Pol-1 and Pol-4 groups. The expression of SREBP-1c and FAS was also significantly decreased in the Pol-4 group. These results suggest that the cholesterol-lowering effects of policosanol can occur due to the inhibition of the expression of SREBP-1c and FAS.

• Korean Journal of Animal Reproduction
• /
• v.23 no.2
• /
• pp.149-157
• /
• 1999

The functional role of cumulus cells on the penetration and polyspermy during in vitro fertilization in porcine was examined. The penetration rate was significantly higher (P＜0.01) in oocytes with (61%) than without (25%) cumulus cells, but significant differences in polysper-my rates were not observed. When hyaluronidase was added to the fertilization medium with different concentrations, penetration rates in oocytes with cumulus cells were higher than in oocytes without cumulus cells at 0 (61% vs 34% ; P＜0.05), 0.01 (56% vs 35% ; P＜0.05), 0.1 (66% vs 30% ; P＜0.05) and 1.0mg/$m\ell$ (39% vs 27%). The polyspermy rates were lower in oocytes without than with cumulus cells, and had a tendency to decrease with high concentrations of hyaluronidase. In another experiment, the penetration and polyspermy rates had a tendency to increase as time of sperm-oocyte culture was prolonged. At 16 and 20 h after insemination, the penetration rates were significantly higher (P＜0.05) in oocytes with (48 and 62% for 16 and 20 h) than without (25 and 31% for 16 and 20 h) cumulus cells in medium containing hyaluronidase. Polyspermy rates were significantly (P＜0.05) lower in oocytes without (13% and 16%) than with (37% and 48%) cumulus cells at 16 and 20 h after insemination. In cumulus-free oocytes inseminated in medium containing different concentrations of cumulus cells, the penetration rates were significantly (P＜0.05) higher in medium with than without hyaluronidase. The proportion of polyspermy was lower in medium without than with hyaluronidase at 0 (10% vs 0%), 10$^2$(25% vs 0%), 10$^4$(24% vs 14%) and 10$^{6}$ (29% vs 10% ; P＜0.05) cumulus cells/$m\ell$. These results suggest that cumulus cells can have a positive influence on sperm penetration, its action on polyspermy control does appear to function primarily on zona pellucida by co-culture of cumulus cells and oocytes in medium without hyaluronidase.

• Korean Journal of Animal Reproduction
• /
• v.23 no.2
• /
• pp.141-148
• /
• 1999

This study was to test whether the viability of bovine hatched blastocysts (HBs) can be maintained after vitrification and thawing. The HBs were produced in vitro at Day 9 and Day 10 after IVF, and they were classified to small (S-HBs; ø$\leq$300 ${\mu}{\textrm}{m}$) and large(L-HBs; ø＞300 ${\mu}{\textrm}{m}$) on the basis of embryo diameter using eyepiece micrometer. As freezing solution, we used EFS35 which consisted of 35% ethylene glycol (EG), 18% ficoll, 0.3 M sucrose and 10% FBS added in mDPBS. Vitrification was taken by two-step method, the HBs were equilibrated in 10% EG for 5 minutes and then shortly exposed in EFS35 and plunged into L$N_2$for 30~45 sec. After thawing, the survival rates were assessed by the re-expansion of the blastocoel during 2 h and 16 h of culture. The results obtained in these experiments were summarized as follows; 1) When the blastocysts(40.8%) recovered at Day 8 after IVF were further cultured for 24 h(Day 9 after IVF) and 48 h(Day 10 after IVF), the rates of HBs were 20.5% and 6.7%, respectively. Also, the total cell number of HBs on Day 9 was significantly higher than that of HBs on Day 10 (p＜0.01). 2) When the effects of freezing solution to the survival of Day 9 L-HBs were examined, the rate of vitrified group (75.7%) was significantly lower than 100% of control and exposed group(p＜0.05). 3) When the survival rates of vitrified HBs according to size and developmental age were examined, the data of L-HBs (75.5%) and S-HBs(63.6%) on Day 9 were slightly higher than those of L-HBs(64.3%) and S-HBs(60.7%) on Day 10. 4) Also, when the in vitro survival of Day 9 HBs was evaluated under different culture condition after thawing, the result in culture medium only (79.3%) was significantly higher than 43.2% in co-culture group (p＜0.05). These results demonstrated that bovine HBs can be successfully cryopreserved by two-step vitrification method using EFS35.

• Atmosphere
• /
• v.32 no.1
• /
• pp.61-70
• /
• 2022

This study evaluates the economic values for the several first precipitation events during Changma period. The selected three years are 2015, 2019, and 2020, where average precipitation amounts across the 58 Korean stations are 12.8, 20.1 and 13.3 mm, respectively. The four categories are used to assess the values including air quality improvement, water resource acquisition/accumulation, drought mitigation, and forest fire prevention/recovery. Economic values for these three years are estimated 50~150 billion won. Among the four factors considered, the effect of air quality improvement is most highly valued, amounting to 70 to 90% of the total economic values. Wet decomposition of air pollution (PM₁₀, NO₂, CO, and SO₂) is the primary reason. The next valuable element is water resource acquisition, which is estimated 9~15 billion won. Effects of drought mitigation and fire prevention are deemed relatively small. This study is the first to estimate the value of the precipitation events during Changma onset. An analysis for more Changma years will be performed to achieve a more reliable estimate.

• Korean Journal of Ecology and Environment
• /
• v.55 no.1
• /
• pp.60-75
• /
• 2022

The Bayesian algorithm model is a model algorithm that calculates probabilities based on input data and is mainly used for complex disasters, water quality management, the ecological structure between living things or living-non-living factors. In this study, we analyzed the main factors affected Korean Estuary Trophic Diatom Index (KETDI) change based on the Bayesian network analysis using the diatom community and physicochemical factors in the domestic estuarine aquatic ecosystem. For Bayesian analysis, estuarine diatom habitat data and estuarine aquatic diatom health (2008~2019) data were used. Data were classified into habitat, physical, chemical, and biological factors. Each data was input to the Bayesian network model (GeNIE model) and performed estuary aquatic network analysis along with the nationwide and each coast. From 2008 to 2019, a total of 625 taxa of diatoms were identified, consisting of 2 orders, 5 suborders, 18 families, 141 genera, 595 species, 29 varieties, and 1 species. Nitzschia inconspicua had the highest cumulative cell density, followed by Nitzschia palea, Pseudostaurosira elliptica and Achnanthidium minutissimum. As a result of analyzing the ecological network of diatom health assessment in the estuary ecosystem using the Bayesian network model, the biological factor was the most sensitive factor influencing the health assessment score was. In contrast, the habitat and physicochemical factors had relatively low sensitivity. The most sensitive taxa of diatoms to the assessment of estuarine aquatic health were Nitzschia inconspicua, N. fonticola, Achnanthes convergens, and Pseudostaurosira elliptica. In addition, the ratio of industrial area and cattle shed near the habitat was sensitively linked to the health assessment. The major taxa sensitive to diatom health evaluation differed according to coast. Bayesian network analysis was useful to identify major variables including diatom taxa affecting aquatic health even in complex ecological structures such as estuary ecosystems. In addition, it is possible to identify the restoration target accurately when restoring the consequently damaged estuary aquatic ecosystem.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.188-196
• /
• 2023

Among marine accidents caused by bad weather, visibility restrictions caused by sea fog occurrence cause accidents such as ship strand and ship bottom damage, and at the same time involve casualties caused by accidents, which continue to occur every year. In addition, low visibility at sea is emerging as a social problem such as causing considerable inconvenience to islanders in using transportation as passenger ships are collectively delayed and controlled even if there are local differences between regions. Moreover, such measures are becoming more problematic as they cannot objectively quantify them due to regional deviations or different criteria for judging observations from person to person. Currently, the VTS of each port controls the operation of the ship if the visibility distance is less than 1km, and in this case, there is a limit to the evaluation of objective data collection to the extent that the visibility of sea fog depends on the visibility meter or visual observation. The government is building a marine weather signal sign and sea fog observation networks for sea fog detection and prediction as part of solving these obstacles to marine traffic safety, but the system for observing locally occurring sea fog is in a very insufficient practical situation. Accordingly, this paper examines domestic and foreign policy trends to solve social problems caused by low visibility at sea and provides basic data on the need for government support to ensure maritime traffic safety due to sea fog by factually investigating and analyzing social problems. Also, this aims to establish a more stable maritime traffic operation system by blocking marine safety risks that may ultimately arise from sea fog in advance.