• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.4-5
• /
• 2010

The surface phonon is defined as a coherent vibrational excitation of surface atoms propagating along the surface. It is characterized by a phonon dispersion curves, which were extensively studied in 1990's using helium atom scattering and high-resolution electron-energy-loss spectroscopy (HREELS)[1].The understanding is mainly based on the theoretical framework of a classical bond model or cluster calculations. The recent sample preparation and first principles calculations open the naval way to deep insight for surface phonon problems. The surface phonon dispersion on the hydrogen-terminated Si(111)-($1{\times}1$) surface [H:Si(111)] is the typical system and already reported experimentally [2] and theoretically [3], although the understandingis incomplete. The sample contaminated by the oxygen atoms on the surface and the calculations were also classical. In this study, firstly, we have prepared an ultra-clean H:Si(111) surface [4] and measured the surface phonon dispersion curvesusing HREELS. Secondly, we have performed first-principles density functional calculations with the projector augmented wave functionals, as implemented in VASP, using generalized gradient approximations. We used aslab of six silicon layers and both top and bottom surfaces were terminated with hydrogen atoms. Finally, we have compared with the surface phonon dispersion of deuterium-terminatedSi(111)-($1{\times}1$) surface[5] and led to our conclusions. The Si-H stretching and the bending modes are observed at 258.5 and 78.2 meV, respectively. These energies are the same as the previously reported values [2], but the energy-loss peaks at the lower energy regions are dramatically shifted. Through this combination study, we have formulated the procedure of preparing ultra-clean H:Si(111)/D:Si(111), which was confirmed by HREELS vibrational analysis. The Si surface will be utilized for further nano-physics research as well as for the materials for nano-fubrication.

• Journal of the Korean Society of Earth Science Education
• /
• v.16 no.1
• /
• pp.153-165
• /
• 2023

This study investigates learners' environmental literacy, classifies the results by factors of environmental literacy, and then investigates the differences in the students' environmental behavior practice experiences according to the classification by factor. The study was conducted with 47 6th grade students from D elementary school located in P metropolitan city as the subject of final analysis, and environmental literacy questionnaires and environmental behavior practice experience questionnaires were used as the main data. As a result of the study, the learners were classified into three groups according to the factors of environmental literacy, and they were respectively named as the "High environmental literacy group", "low environmental literacy group", and "Low Function and Affectif group". A Word network was formed using the descriptions of environmental behavior practice experiences for each cluster, and a Degree Centrality Analysis was performed to visualize and then analyze. As a result of the analysis, "High environmental literacy group" was confirmed, 1) recognized the subjects of environmental action practice as individuals and families, 2) described his experience of environmental action practice in relation to all elements of environmental literacy, and had a relatively pessimistic view. "low environmental literacy group", and "Low Function and Affectif group" were confirmed 1) perceive the subject of environmental behavior practice as a relatively social problem, 2) the description of the experience of environmental behavior practice is relatively biased specific factors, and the "Low Function and Affectif group" is particularly focused on the knowledge element. And 3) it was confirmed that they were aware of climate change from a relatively optimistic perspective. Based on this conclusion, suggestions were made from the perspective of environmental education.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.753-770
• /
• 2006

In urban areas, groundwater pollution is heavily affected by urbanization with land use types. This study aims to characterize groundwater quality and contamination in Sasang industrial area of Busan Metropolitan City where metalworking, machinery and footwear factories are located. Busan Metropolitan City is the highest in the utilization of groundwater resources among the metropolitan cities in Korea. $K^+,\;Na^+,\;Ca^{2+},\;Mg^{2+},\;Cl^-,\;SO_4^{2-}\;and\;HCO_3^-$ concentrations, and electrical conductivity (EC), total dissolved solids (TDS) and salinity are high in the areas near the Nakdong River. The results are attributed to the influence of salt water which intruded into the coastal sediments during sedimentation. In addition, the dominant chemical type of Ca-Cl indicates the influence of salt water in the geological formations as well as anthropogenic pollution. $SiO_2$ ion is interpreted to originate from both water-silicate mineral reactions and the decomposition of cement concretes. Trichloroethylene (TCE) was detected at 12 sites of total 18 sites. However, tetrachloroethylene (PCE) was detected at f sites and 1.1.1-trichloroethane (TCA) at 3 sites. According to the factor analysis, factor 1 was explained by 49.8%, factor 2 19.8%, and factor 3 11.0% with total 80.6% explanation. pH, TDS, salinity, $Ca^{2+},\;K^+,\;Mg^{2+},\;Na^+,\;Al^{3+},\;As^{3+},\;Cl^-\;and\;Fe^{2+}$ were positively highly loaded to factor 1. The chemical components loaded to factor 1 represent the chemical characteristics of both industrial pollution and influence by salt water. Based on the cluster analysis and distribution pattern of chemical components, the concentration of $Na^+,\;Ca^{2+},\;Cl^-,\;SO_4^{2-}\;K^+,\;and\;Mg^{2+}$ is high in the riverside area of the Nakdong River composed of coastal sediments that is influenced by salt water. The downstream area of the Hakjang Stream is judged to be affected by both salt water and artificial pollution. The other part of the study area is interpreted by anthropogenic pollution.

• Journal of computational fluids engineering
• /
• v.15 no.2
• /
• pp.7-13
• /
• 2010

Flight vehicles such as wheel wells and bomb bays have many cavities. The flow around a cavity is characterized as an unsteady flow because of the formation and dissipation of vortices brought by the interaction between the free stream shear layer and the internal flow of the cavity. The resonance phenomena can damage the structures around the cavity and negatively affect the aerodynamic performance and stability of the vehicle. In this study, a numerical analysis was performed for the cavity flows using the unsteady compressible three-dimensional Reynolds-Averaged Navier-Stokes (RANS) equation with Wilcox's turbulence model. The Message Passing Interface (MPI) parallelized code was used for the calculations by PC-cluster. The cavity has aspect ratios (L/D) of 5.5 ~ 7.5 with width ratios (W/D) of 2 ~ 4. The Mach and Reynolds numbers are 0.4 ~ 0.6 and $1.6{\times}10^6$, respectively. The occurrence of oscillation is observed in the "shear layer and transient mode" with a feedback mechanism. Based on the Sound Pressure Level (SPL) analysis of the pressure variation at the cavity trailing edge, the dominant frequencies are analyzed and compared with the results of Rossiter's formula. The dominant frequencies are very similar to the result of Rossiter's formula and other experimental datum in the low aspect ratio cavity (L/D = ~4.5). In the high aspect ratio cavity, however, there are other low dominant frequencies of the leading edge shear layer with the dominant frequencies of the feedback mechanism.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.13-18
• /
• 2009

Flight vehicles such as wheel wells and bomb bays have many cavities. The flow around a cavity is characterized as an unsteady flow because of the formation and dissipation of vortices brought about by the interaction between the free stream shear layer and the internal flow of the cavity. The resonance phenomena can damage the structures around the cavity and negatively affect the aerodynamic performance and stability of the vehicle. In this study, a numerical analysis was performed for the cavity flows using the unsteady compressible three-dimensional Reynolds-Averaged Navier-Stokes (RANS) equation with Wilcox's turbulence model. The Message Passing Interface (MPI) parallelized code was used for the calculations by PC-cluster. The cavity has aspect ratios (L/D) of 2.5 ~ 7.5 with width ratios (W/D) of 2 ~ 4. The Mach and Reynolds numbers are 0.4 ~ 0.6 and $1.6{\times}106$, respectively. The occurrence of oscillation is observed in the "shear layer and transient mode" with a feedback mechanism. Based on the Sound Pressure Level (SPL) analysis of the pressure variation at the cavity trailing edge, the dominant frequencies are analyzed and compared with the results of Rossiter's formula. The dominant frequencies are very similar to the result of Rossiter's formula and other experimental data in the low aspect ratio cavity (L/D = ~ 4.5). In the large aspect ratio cavity, however, there are other low dominant frequencies due to the leading edge shear layer with the dominant frequencies of the feedback mechanism. The characteristics of the acoustic wave propagation are analyzed using the Correlation of Pressure Distribution (CPD).

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.3
• /
• pp.1919-1923
• /
• 2013

Background: Smoking is known as a major risk factor for different types of cancer, as well as cardiovascular disease. Its prevalence is increasing in developing countries. The aims of this study were to determine the prevalence of smoking and its associated factors among the population aged 40-64 years in the city of Shahroud which is a representative urban population in Iran. Materials and Methods: A cross-sectional population-based study with stratified random cluster sampling was conducted in 2009 as the first phase of Shahroud Eye Cohort Study. Of 6,311 people, 5,190 participated (82.2%). Information about smoking habit was obtained by face-to-face interview. Results: The overall prevalence of current tobacco smoking was 11.3% (95%CI: 10.5-12.3). It was significantly higher among males than females (25.7% and 0.71%, P<0.001). The prevalence of current cigarette smoking was 10.8% and 1.75% were past smokers. The smoking rate of water-pipe was 0.67%. Unemployed people smoked more than employed (OR=2.66, 95%CI: 1.38-5.14). Conclusions: The prevalence of smoking is low in Shahroud compared with other parts of Iran and other countries. Age, sex, job and marital status were associated with smoking. The low smoking rate among women may be attributed to cultural and social reasons.

• Journal of Genetic Medicine
• /
• v.15 no.2
• /
• pp.92-96
• /
• 2018

Chronic mucocutaneous candidiasis (CMC) is characterized by increased susceptibility to chronic and recurrent infections of the skin, mucous membranes, and nails by Candida species. It is a primary immunodeficiency disorder that is difficult to diagnose because of its heterogeneous clinical manifestations and genetic background. A 20-month-old boy who did not grow in height for 3 months was diagnosed as having hypothyroidism and he had hepatitis which was found at 5 years old. He presented with persistent oral thrush and vesicles on the body, the cause of which could not be identified from laboratory findings. No microorganism was detected in the throat culture; however, the oral thrush persisted. Immunological tests showed that immunoglobulin (Ig) subclass IgG and cluster of differentiation (CD)3, CD4, and CD8 levels were within normal limits. We prescribed oral levothyroxine and fluconazole mouth rinse. The patient was examined using diagnostic exome sequencing at the age of 6 years, and a c.1162A>G (p.K388E) STAT1 gene mutation was identified. A diagnosis of CMC based on the STAT1 gene mutation was, thus, made. At the age of 8 years, the boy developed a malar-like rash on his face. We conducted tests for detection of antinuclear antibodies and anti-dsDNA antibodies, which showed positive results; therefore, systemic lupus erythematosus (SLE) was also suspected. Whole exome sequencing is important to diagnose rare diseases in children. A STAT1 gene mutation should be suspected in patients with chronic fungal infections with a thyroid disease and/or SLE.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.4
• /
• pp.247-256
• /
• 2013

In this study, alginate beads containing birnessite (Bir-AB), a highly reactive oxidative catalyst for the transformation of phenolic compounds, was prepared and its 1-naphthol (1-NP) removal efficiency was investigated in a batch test. Based on scanning electron microscopy image, it can be inferred that the alginate gel cluster acts as a bridge which bind the birnessite particles together. Kinetic experiment with Bir-AB of different mixing ratios of birnessite to alginate (Bir : AG=0.25 : 1~1 : 1 w/w) indicate that pseudo-first order kinetic constants, $k(hr^{-1})$ for the 1-NP removals increased about 1.5 times when the birnessite mixing ratio was doubled. The removals of 1-NP was found to be dependent on solution pH and the pesudo-first order rate constants were increased from 0.331 $hr^{-1}$ at pH 10 to 0.661 $hr^{-1}$ at pH 4. The analysis of total organic carbon for the reaction solutions showed that a higher removal of dissolved organic carbon was achieved with Bir-AB as compared to birnessite. HPLC chromatographic analysis of the methanol extract after reaction of 1-NP with Bir-AB suggest that the reaction products could be removed through incorporation into the aliginate beads as a bound residue. Mn ions produced from the oxidative transformation of 1-NP by birnessite were also removed by sorption to Bir-AB. The Bir-AB was recovered quantitatively by simple filtration and was reused twice without significant loss of the initial reactivity.

• The Journal of Internal Korean Medicine
• /
• v.30 no.3
• /
• pp.594-603
• /
• 2009

Objectives : ICH breaks down blood vessels within the brain parenchyma, which finally leads to neuronal loss, drugs to treat ICH have not yet been established. In this experiment, we measured the effect of Woowhangchongshim-won (WWCSW) on intracerebral hemorrhage (ICH) in rat using microarray technology. Methods : We measured the effect of WWCSW on ICH in rat using microarray technology. ICH was induced by injection of collagenase type IV, and total RNA was isolated. Image files of microarray were measured using a ScanArray scanner, and the criteria of the threshold for up- and down-regulation was 2 fold. Hierarchical clustering was implemented using CLUSTER and TREEVIEW program, and for Ontology analysis. GOSTAT program was applied in which p-value was calculated by Chi square or Fisher's exact test based on the total array element. Results : WWCSW-treatment restored the gene expression altered by ICH-induction in brain to the levels of 76.0% and 70.1% for up- and down-regulated genes, respectively. Conclusion : Co-regulated genes by ICH model of rat could be used as molecular targets for therapeutic effects of drug including WWCSW. That is, the presence of co-regulated genes may represent the importance of these genes in ICH in the brain and the change of expression level of these co-regulated genes would also indicate the functional change of brain tissue.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.7
• /
• pp.429-434
• /
• 2016

This paper deals with the characteristics of partial discharge (PD) for the purpose of a condition based maintenance (CBM) of gas insulated switchgears (GIS) in power equipment. Four types of electrode systems such as a protrusion on enclosure (POE), a particle on spacer (POS), a free particle (FP) and a Floating were designed and fabricated. PD pulses were measured using UHF sensor with a frequency range of 300 MHz~1.4 GHz and a DAQ with a sampling rate of 250 MS/s. Discharge inception voltage (DIV), discharge extinction voltage (DEV), and phase resolved partial discharge (PRPD) were analyzed depending on electrode systems. The average DIV in the POS was 28.8 kV. It was about 1.7 times higher than that in the FP, which was the lowest value of 17.2 kV. The FP shuffled and jumped at the applied voltage of 23.5 kV. Over 95% of PD pulses in the POE were generated in the negative polarity ($181^{\circ}{\sim}360^{\circ}$) of applied voltage. The results showed the phase (${\Phi}$)-magnitude (dBm) of PD pulses by UHF sensor, a cluster was formed separately depending on electrode systems.