• 산업경영시스템학회지
• /
• 제24권63호
• /
• pp.13-21
• /
• 2001

The present study compared the two experimental methods on inquiring the image structure of odors: Presenting a stimulus is one, and not presenting a stimulus is the other. For experiment one, five odors were presented, and the subjects were instructed to evaluate the odors on 7-point scale for each of the 25 adjectives. For experiment two, no odor was presented, and the subjects were instructed to perform the pair-wise comparisons for the each pair of two adjectives on their similarities on 7-point scale. The data from the two experiments were analysed and compared using MDS(Multi-Dimensional Scaling), Correlation, Cluster Analysis. The results showed that there was no structural differences between two experimental methods in term of the Image structure of odors. But, minor disparity was found between two methods in terms of density of distribution of the adjectives. It was construed that the difference came from the difference of the memory that was used for each of the experiments; that is, short term memory for experiment one and long-term memory for experiment two.

• 천문학논총
• /
• 제30권2호
• /
• pp.521-523
• /
• 2015

The Milky Way did not form in isolation, but is the product of a complex evolution of generations of mergers, collapses, star formation, supernovae and collisional heating, radiative and collisional cooling, and ejected nucleosynthesis. Moreover, all of this occurs in the context of the cosmic expansion, the formation of cosmic filaments, dark-matter haloes, spiral density waves, and emerging dark energy. This paper summarizes a review of recent attempts to reconstruct this complex evolution. We compare simulated properties with various observed properties of the Local Group. Among the generic features of simulated systems is the tendency for galactic halos to form within the dark matter filaments that define a supergalactic plane. Gravitational interaction along this structure leads to a streaming flow toward the two dominant galaxies in the cluster. We analyze this alignment and streaming flow and compare with the observed properties of Local-Group galaxies. Our comparison with Local Group properties suggests that some dwarf galaxies in the Local Group are part of a local streaming flow. These simulations also suggest that a significant fraction of the Galactic halo formed at large distances and arrived later along these streaming flows.

• 천문학회보
• /
• 제37권2호
• /
• pp.78.1-78.1
• /
• 2012

We have studied the physical properties of X-ray point sources in galaxy clusters using ~600 Chandra archival observations. The goal of this study is to investigate the density environmental effects on the physical properties of X-ray point sources by comparing the properties of X-ray point sources in galaxy clusters to those in typical blank fields. In this presentation, we show the nature of X-ray point sources which are expected to be related with galaxy clusters with different core properties. Using ~60 galaxy clusters observed with Chandra, we investigate the physical properties of X-ray point sources in cool-core and non-cool-core clusters. The cool-core clusters are known to have short central cooling time, and are characterized by low central entropy, systematic central temperature drops, and a brightest cluster galaxy at the X-ray peak. While the non-cool-core clusters have longer central cooling time, and are characterized by large central entropies and flat or centrally rising temperature profile. We show that how central core properties of galaxy clusters affect on the physical properties of X-ray point sources.

• International Journal of Ocean System Engineering
• /
• 제3권2호
• /
• pp.102-110
• /
• 2013

The purpose of this study was to improve the properties of epoxy resin using titanium oxide nanoparticles. The effects of particle weight fraction, dispersion agent, and curing agents with different molecular weights on the thermal and mechanical properties of titanium-oxide-reinforced epoxy resin were investigated. In addition, the effect of the particle dispersion condition on the mechanical properties of nanocomposites was studied. As a result, it was found that the glass transition temperature of film-shaped nanocomposites decreased with an in-crease in the nanoparticle content. Because nanoparticles interrupted the cross linkage between the epoxy resin and the amine curing agent, the cross-link density of the epoxy became lower and led to a decrease in $T_g$ in the nanocompo-sites. The tensile strength and modulus in film-shaped nanocomposites also increased with the particles content. But in the case of dog-bone-shaped nanocomposites, the values were not similar to the trend for the film-shaped nanocompo-sites. This was probably a result of the different nanoparticles dispersions in the epoxy resins resulting from the respective-thicknesses of the film and dog-bone-shaped samples.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.309-312
• /
• 2004

The electronic structure of ZnO oxide semiconductor having high optical transparency and good electric conductivity was theoretically investigated by $DV-X_{\alpha}$(the discrete variation $X_{\alpha}$) method, which is a sort of the first principle molecular orbital method using Hatre-Fock-Slater approximation. The electrical and optical properties of ZnO are seriously affected by the addition of impurities. The imnurities are added to ZnO in order to increase the electric conductivity of an electrode without losing optical transparency. In this study, the effect of impurities of III and IV family on the band structure, impurity levels and the density of state of ZnO were investigated. The cluster model used for calculations was $[MZn_{50}O_{53}]^{-2}$(M=elements belonging to III and IV family).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.355-355
• /
• 2010

The epitaxial growth of MgO film on Fe(001) has been investigated by scanning tunneling microscopy (STM). After confirming the clean Fe(001)-c($2{\times}2$) substrate by STM, Mg was deposited at room temperature (RT) under $O_2$ partial pressure of $10^{-7}\;Torr$. The MgO was grown as clusters, not as an epilayer even after postannealing at $400^{\circ}C$, as shown in Figure (a). On the contrary, when Mg was deposited on Fe(001)-c($2{\times}2$) at RT and post-oxidized through exposing $O_2$ at partial pressure $10^{-7}\;Torr$, the thin-layered film with some clusters was formed. Extended-annealing at $400^{\circ}C$ reduced the cluster density, and finally the single and epitaxial MgO-c($2{\times}2$) film was formed on Fe(001)-c($2{\times}2$) as shown in Figure (b). This ultrathin MgO film formed on Fe is expected to be applied to many technological applications, such as catalysis, microelectronics, and magnetic devices.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권10호
• /
• pp.4933-4956
• /
• 2016

Use-After-Free (UAF) is a common lethal form of software vulnerability. By using tools such as Web Browser Fuzzing, a large amount of samples containing UAF vulnerabilities can be generated. To evaluate the threat level of vulnerability or to patch the vulnerabilities, automatic deduplication and exploitability determination should be carried out for these samples. There are some problems existing in current methods, including inadequate pertinence, lack of depth and precision of analysis, high time cost, and low accuracy. In this paper, in terms of key dangling pointer and crash context, we analyze four properties of similar samples of UAF vulnerability, explore the method of extracting and calculate clustering eigenvalues from these samples, perform clustering by fast search and find of density peaks on a large number of vulnerability samples. Samples were divided into different UAF vulnerability categories according to the clustering results, and the exploitability of these UAF vulnerabilities was determined by observing the shape of class cluster. Experimental results showed that the approach was applicable to the deduplication and exploitability determination of a large amount of UAF vulnerability samples, with high accuracy and low performance cost.

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2421-2429
• /
• 2018

Thiol-based self-assembled anchor linked to glucose oxidase (GOx) and gold nanoparticle (GNP) cluster is suggested to enhance the performance of glucose biosensor. By the adoption of thiol-based anchors, the activity of biocatalyst consisting of GOx, GNP, polyethyleneimine (PEI) and carbon nanotube (CNT) is improved because they play a crucial role in preventing the leaching out of GOx. They also promote electron collection and transfer, and this is due to a strong hydrophobic interaction between the active site of GOx and the aromatic ring of anchor, while the effect is optimized with the use of thiophenol anchor due to its simple configuration. Based on that, it is quantified that by the adoption of thiophenol as anchor, the current density of flavin adenine dinucleotide (FAD) redox reaction increases about 42%, electron transfer rate constant ($k_s$) is $9.1{\pm}0.1s^{-1}$ and the value is 26% higher than that of catalyst that does not use the anchor structure.

• 한국멀티미디어학회논문지
• /
• 제22권6호
• /
• pp.676-683
• /
• 2019

Wireless Sensor Networks (WSNs) consist of multiple tiny and power constrained sensors which use radio frequencies to carry out sensing in a designated sensor area. To effectively design and implement reliable WSN, it is critical to consider models, protocols, and algorithms that can optimize energy consumption of all the sensor nodes with optimal amount of packet delivery. It has been observed that deploying a single sink node comes with numerous challenges especially in a situation with high node density and congestion. Sensor nodes close to a single sink node receive more transmission traffic load compared to other sensors, thus causing quick depletion of energy which finally leads to an energy hole and sink hole problems. In this paper, we proposed the use of multiple energy efficient sink nodes with brute force technique under optimized parameters to improve on the number of packets delivered within a given time. Simulation results not only depict that, deploying N sink nodes in a sensor area has a maximum limit to offer a justifiable improvement in terms of packet delivery ratio but also offers a reduction in End to End delay and reliability in case of failure of a single sink node, and an improvement in the network lifetime rather than deploying a single static sink node.

• 한국의류학회지
• /
• 제43권3호
• /
• pp.427-439
• /
• 2019

This study investigated the semantic network based on the focus of the fashion image and SNS text utilized by global SPA brands on the last seven years in terms of the quantity and quality of data generated by the fast-changing fashion trends and fashion content-based media environment. The research method relocated frequency, density and repetitive key words as well as visualized algorithms using the UCINET 6.347 program and the overall classification of the text related to fashion images on social networks used by global SPA brands. The conclusions of the study are as follows. A common aspect of global SPA brands is that by looking at the basis of text extraction on SNS, exposure through image of products is considered important for sales. The following is a discriminatory aspect of global SPA brands. First, ZARA consistently exposes marketing using a variety of professions and nationalities to SNS. Second, UNIQLO's correlation exposes its collaboration promotion to SNS while steadily exposing basic items. Third, in the case of H&M, some discriminatory results were found with other brands in connectivity with each cluster category that showed remarkably independent results.