• Wind and Structures
• /
• v.7 no.3
• /
• pp.159-172
• /
• 2004

The study of how buildings affect wind flow is an important part of the research being conducted on urban climate and urban air quality. NJU-UCFM, a standard $k-{\varepsilon}$ turbulence closure model, is presented and is used to simulate how the following affect wind flow characteristics: (1) an isolated building, (2) urban canyons, (3) an irregular shaped building cluster, and (4) a real urban neighborhood. The numerical results are compared with previous researchers' results and with wind tunnel experiment results. It is demonstrated that the geometries and the distribution of urban buildings affect airflow greatly, and some examples of this include a changing of the vortices behind buildings and a "channeling effect". Although the mean air flows are well simulated by the standard $k-{\varepsilon}$ models, it is important to pay attention to certain discrepancies when results from the standard $k-{\varepsilon}$ models are used in design or policy decisions: The standard $k-{\varepsilon}$ model may overestimate the turbulence energy near the frontal side of buildings, may underestimate the range of high turbulence energy in urban areas, and may omit some important information (such as the reverse air flows above the building roofs). In ideal inflow conditions, the effects of the heights of buildings may be underestimated, when compared with field observations.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.1
• /
• pp.157-165
• /
• 2017

Intelligent transportation systems are currently being developed for elemental technology development of cooperative intelligent transport systems, which enable vehicles to communicate with each other or reduce the risk of traffic accidents, We have been defining and standardizing services according to the purpose of solving traffic safety problems depending on countries. Therefore, in this study, the developed countries of V2X(vehicle-to-everything) based on USA, Europe, Japan, etc., analyzed the service cases selected in the field demonstration stage after completion of the element technology devanalyzed the service cases selected in the field demonstration stage after completion of the element technology development, and to suggest the direction of futureelopment, and to suggest the direction of future policy direction.

• Fashion & Textile Research Journal
• /
• v.11 no.5
• /
• pp.732-740
• /
• 2009

The purpose of this study was to classify consumers by orientation of clothing shopping and to analyze the type of preference store and recognized environmental elements of clothing shop. This survey was carried out through questionnaires of 312 females(Busan region) in their twenties and the data were analyzed by using Factor analysis, Cluster analysis, one-way ANOVA, Duncan test as a post identification and ${\chi}^2$-test. The results of this research can be summarizedas follows: First, orientations of clothing shopping consisted of pleasure shopping orientation, planned shopping orientation, brand shopping orientation, and information of store orientation. The respondents were classified into four groups by these characteristics: high interested shopping group, brand-oriented shopping group, low interested shopping group, and unplanned shopping group. These groups had different type of preference store and there were significantly different preferences among department store, brand agency and regular discount store. The recognized environmental elements of clothing shop were service policy, store atmosphere, store layout, trend of products, product variety, freedom of shopping, and reception service. The groups by characteristics of clothing shopping had different attitude regarding those factors. Especially, they are susceptible to store atmosphere, trend of products and reception service. There was the correlation between type of preference store and environmental elements of store and mainly recognized environmental elements of clothing shop had differences according to type of store.

• The Korean Journal of Health Service Management
• /
• v.8 no.4
• /
• pp.25-34
• /
• 2014

This paper examined the effects of private health insurance (PHI) on the use of endoscopy, sonography, CT, MRI, and PET among Koreans. The data used was the four waves of the Korea Health Panel (2008-2011), and the number of subjects was 141,862 visits. We employed a pooled logistic regression mode which was corrected with cluster errors. The results showed that PHI was positively related to the use of endoscopy, but not related to the use of sonography, CT, MRI, and PET. It is, however, recommended that health policy makers pay attention to the effects of PHI on the use of sonography, CT, MRI, and PET.

• Proceedings of the Technology Innovation Conference
• /
• 2000.06a
• /
• pp.47-64
• /
• 2000

This paper analyses characteristics of the numerical controller industry in market formation and the Flow of information between users and producers and the characteristic of knowledge base of the industry and discusses the difficulties derived, from the characteristics, in accumulation of technological capability In market formation betweenusers and producers, the multi-layered market is not favorable to domestic producers in that lower end market is not large enough to provide cardle market to them which produce inferior quality and lower price than importer products. The credibility of the permance of a product is difficult to prove until a critical mass of products are sold. Therefore gaining market share is deterred by unproven credibility of the performance of the product. The flow of information between users and producers is limited. The flow of information on users environment through mass market to producers is essential for improving credibility of a product. The nature of knowledge base is tacit and the means of knowledge transmission is limited. Technological licensing and reverse engineering, Which have been conventional industry. These characteristics provide conditions of vicious circle in accumulation of technological capability of the numerical controller industry. This paper argues that these characteristics of the industry challenges existing approach to R&D management and framework of science and technology policy.

• The Journal of Korean Society for School & Community Health Education
• /
• v.17 no.3
• /
• pp.61-70
• /
• 2016

Objectives: The purpose of this study was to verify about characteristics about patients using the emergency room of a general hospital of a partial area residents. Methods: The analysis of the data was used by SAS program(ver. 9.2). Chi-square test was used in analyzing degree of emergency of patients visiting the emergency room of a general hospital. Using cluster analysis, subjects were classified into 3groups. Results: Urgent and emergent patients at the age of 40 or greater were significantly higher than in under 10 years. the rates of urgent and emergent patients in male(3.2% and 3.3%) were significantly higher than in female(2.5% and 2.2%)(ｐ<0.001). Urgent patients were the highest at 11 p.m.-3 a.m. and on Thursday and in winter. Emergent patients were the highest at 4 a.m.-8 a.m. and on wednesday and in winter. Patients as cause of disease was the highest in illness. Conclusion: Policy establishment and measures of government and public health authority were needed for emergent diseases at the age of 40 or greater of male and at midnight time and on thursday and wednesday and in winter.

• Journal of the Korean Society of Food Culture
• /
• v.35 no.1
• /
• pp.79-85
• /
• 2020

This study aims to classify parents by considering important factors in the management of foodservice for children. An offline survey was conducted by enrolling 583 Korean parents whose children attended public or private kindergartens in Seoul. The important factors required for managing foodservice for children are meal service resources, menu management, and food allergy. Considering these factors, parents were grouped into 3 clusters: the allergy important group, environment important group, and high concern group. Evaluation of the demographic characteristics revealed a significant difference between clusters with respect to type of kindergarten. Parents perceived that a private kitchen is more required than a private dining room, and perceptions about the need for a private kitchen and dining room were significantly different among the clusters. Furthermore, the results reveal significant differences between clusters, when considering the need to support meal service. Therefore, the government needs to consider characteristics of the parent cluster if they plan to support the kindergarten foodservice. We believe that this study can be used as supportive data to establish a working policy.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.2
• /
• pp.94-100
• /
• 2016

A virtual power plant (VPP) technology is a cluster of distributed generation installations. VPP system is that integrates several types of distributed generation sources, so as to give a reliable overall power supply. Virtual power plant systems play a key role in the smart grids concept and the move towards alternative sources of energy. They ensure improved integration of the renewable energy generation into the grids and the electricity market. VPPs not only deal with the supply side, but also help manage demand and ensure reliability of grid functions through demand response (DR) and other load shifting approaches in real time. In this paper, utilizing a variety of distributed generation resources(such as emergency generator, commercial generator, energy storage device), activation scheme of the virtual power plant technology. In addition, through the analysis of the domestic electricity market, it describes a scheme that can be a virtual power plant to participate in electricity market. It attempts to derive the policy support recommendation in order to obtain the basics to the prepared in position of power generation companies for the commercialization of virtual power plant.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.5 s.153
• /
• pp.674-683
• /
• 2006

The purpose of this study was to examine the effects of T-shirts product type and apparel benefit on consumer preference and purchasing intention. Data for the study were obtained by $3\times2$ mixed factorial design. The subjects were two hundred and thirty college male and female students. The data were analysed by factor analysis, cluster analysis, and ANOVA by using the SPSS program. The results of this study indicated that benefit did not have effects on consumers purchasing intention but significant influences on consumer preference for brand-parody products. For brand-copy products, benefit influenced the purchasing intention, and did not influence the consumer preference. This study suggested that new fashion trends, in association with consumer's benefit, have effects on consumer's purchasing behavior. The result of this study is likely to be useful in planning marketing strategy related to product type and new fashion trends.

• Journal of Digital Convergence
• /
• v.14 no.4
• /
• pp.251-258
• /
• 2016

Big data processing is a broad term for processing data sets so large or complex that traditional data processing applications are inadequate. Widespread use of smart devices results in a huge impact on the way we process data. Many organizations are contemplating how to incorporate or integrate those devices into their enterprise data systems. We have proposed a way to process big data by way of integrating Raspberry Pi into a Hadoop cluster as a computational grid. We have then shown the efficiency through several experiments and the ease of scaling of the proposed system.