• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.7
• /
• pp.1336-1341
• /
• 2009

In this paper, an EMI reduction effects using an EMC chamber is described and reduction methods is proposed. In the case of general electronic components a working frequency is low. But in this paper the vehicle cluster works 75MHz in the main clock frequency, becoming weak by noise because of being attached in TFT LCD. As the outer case installed in the vehicle is made up of plastic materials, the noise is radiated if not protecting noise in the PCB itself. Therefore, This paper will explain the theoretical basis and propriety with respect to the discussion and need about the guide for PCB design considering EMC, through the reduction of PCB noise.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.6
• /
• pp.415-423
• /
• 2018

This study uses a level selection algorithm with fixed sampling frequency for modular multilevel converter (MMC) systems. Theoretically, the proposed method increases the level infinitely while the sampling time remains the same. The proposed method called cluster stream buffer (CSB) consists of several clusters, wherein each cluster is composed of 32 submodules that depend on the level of the submodules in the MMC system. To increase the level of the MMC system, additional clusters are used, and the sampling time between clusters is determined from the sampling time between levels needed for utilizing the entire level from the MMC system. This method is crucial in the control of MMC-type HVDC systems because it improves scalability and precision.

• Proceedings of the KSPS conference
• /
• 2000.07a
• /
• pp.86-87
• /
• 2000

In this paper, we discuss why two different surface forms appear in loanwords for English and German /${\int}$/ In Korean, a vowel is inserted into loanwords if a consonant cannot be properly syllabified. Therefore, /${\int}$/ in some positions of loanwords trigger vowel insertion. Interestingly, /${\int}$/s in the onset cluster of English and German words were borrowed in Korean as Iful with the inserted vowel [u] whereas If Is in the coda position of English and German words were borrowed as Ifil with the inserted vowel [i]. For example, 'shrimp' is adopted as [${\int}urimphi$] whereas 'rush' is adopted as [$ra{\int}i$]. In this paper, we attempt to find out the phonetic reason for the distribution of the surface forms of /${\int}$/. We assume that since the formant frequency of [i] is higher than that of [u], the peak frequency of /${\int}$/ with the surface form of [${\int}$i] in loanwords may be higher than that of /${\int}$/ with the surface form of [${\int}u$]. We also assume that duration may be another factor for the distribution of [${\int}i$] and [${\int}u$]. Since /${\int}$/ and /u/ use lip rounding whereas /i/ doesn't, the duration for [${\int}i$] might be longer than that of [${\int}u$]. German supports our assumption. /${\int}$/ in the onset cluster is longer than /${\int}$/ in the coda position. It also has higher peak frequency than that of /${\int}$/ in the coda position. In loanwords, ${\int}$ in the onset cluster is borrowed as [${\int}u$] as in Spiegel whereas /${\int}$/ in the coda position is borrowed as [${\int}i$] as in Bosch. English, however, does not support our assumption. Peak frequency of [${\int}$] depends on the preceding vowel, not on its position in the syllable structure. If the preceding vowel is front, then the peak freuency of the following of the following /${\int}$/ is high but if the preceding vowel is back, than the peak frequency of the following /${\int}$/ is low. The peak frequency of /${\int}$/ in the onset cluster seems to be in between. As we assumed, however, the duration of /${\int}$/ in the coda position is longer than of /${\int}$/ in the onset cluster. With the mixed results, we question whether Koreans really hear two different xounds for /${\int}$/ in English words. For the future experiment, we would like to perform the perception tet for /${\int}$/ in English words.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.4
• /
• pp.195-209
• /
• 2021

According to the 2019-2020 social media usage survey conducted by the Seoul e-commerce center, 5 out of 10 consumers have experienced shopping through social media. The cost of traditional advertising media has been reduced and advertising spending on social media has risen by 74%, indicating that social media is becoming a more important marketing element. While the number of users of social media has increased and corporate marketing activities have increased accordingly, research has been conducted in various aspects of marketing such as user motivation for social media, satisfaction, and purchase intention. There was no subdivided study on the differences in the social media usage frequency of consumers in actual purchasing behavior. This study attempted to identify differences in consumer characteristics by cluster in the agrifood purchase situation by grouping them by type according to the frequency of use of social media for consumers who purchase agri-food online. Product involvement, product need, and online purchase channel Consumer characteristics such as demographic distribution, perceived risk, and eating and lifestyle in each cluster were checked for the three agrifood purchase situations including choice, and types for each cluster were presented. To this end, questionnaire data on the frequency of social media use and online agrifood purchase behavior were collected from 245 consumers, and the validity of the measurement variables was secured through factor analysis and reliability analysis. As a result of cluster analysis according to the frequency of social media use, it was divided into three clusters. The first cluster was a group that mainly used open social media, and the second cluster was a group that used both open and closed social media and online shopping malls; The third cluster was a group with low online media usage overall, and the characteristics of each cluster appeared. Through regression analysis, the effect on product involvement, product need, and purchase channel selection when purchasing agri-food online through each of the three clusters was confirmed through regression analysis. As a result of the regression analysis, the characteristic of cluster 1 in the situation of purchasing agri-food online is a male in his 30s living in a rural area who has no reluctance to purchase agri-food on social media or online shopping malls. The characteristics of cluster 2 are mainly consumers who are interested in purchasing health food, and the consumer characteristics are represented. In the case of cluster 3, when purchasing products online, they purchase after considering quality and price a lot, and the consumer characteristics are represented as people who are more confident in purchasing offline than online. Through this study, it is judged that by identifying the differences in consumer characteristics that appear in the agri-food purchase situation according to the frequency of social media use, it can be helpful in strategic judgments in marketing practice on social media customer targeting and customer segmentation.

• Journal of the Optical Society of Korea
• /
• v.20 no.2
• /
• pp.276-282
• /
• 2016

A 2 Gbit/s visible-light communication (VLC) scheme using time-frequency color-clustered (TFCC) multiple-input multiple-output (MIMO) based on blue, cyan, yellow, and red (BCYR) light-emitting diodes (LEDs) is presented. In the proposed scheme, BCYR LEDs are employed to form four different color clusters. Data transmission using the four color clusters is performed in MIMO, so that the scheme achieves a very high speed of data transmission. Moreover, the scheme employs the TFCC strategy to yield high performance in terms of bit error rate (BER). TFCC operates in such a way that the original data and the two delayed versions of the data are multiplied by orthogonal frequencies and then transmitted using a specific color of the BCYR LED. In the receiver, color filters are employed to detect the data transmitted from the desired cluster. Selection combining (SC) is also performed to yield a diversity effect within each color cluster, to further improve the performance. Performance evaluation demonstrates that the proposed TFCC MIMO VLC offers a data rate of 2 Gbit/s and a bit error rate of 4×10^-5, at an E_b/N_o value of merely 3 dB.

• Journal of the Korea Society for Simulation
• /
• v.15 no.4
• /
• pp.87-96
• /
• 2006

Wireless Sensor Network (WSN) is researched in various filed. Underwater Sensor Network (UWSN) is used various purpose such as underwater environment monitoring. But, WSN is researched in the terrestrial that uses mainly radio frequency, The existing terrestrial research is incongruent to apply to underwater. Therefore, we propose UWSN architecture that considers underwater environment. In this paper, UWSN applied cluster technique and functional node constructs. Each cluster collects and sends cluster data. Dual super cluster head receives cluster data and transmits each in the base-station. We implement WSN routing algorithm, and construct test-bed and analyze cluster data receive rate.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.14-24
• /
• 2010

Because WSNs operate with limited resources of sensor nodes, its life is extended by cluster-based routing methods. In this study, we use data on direction, distance, density and residual energy in order to maximize the energy efficiency of cluster-based routing methods. Through this study, we expect to minimize the frequency of isolated nodes when selecting a new cluster head autonomously using information on the direction of the upper cluster head, and to reduce energy consumption by switching sensor nodes, which are included in both of the new cluster and the previous cluster and thus do not need to update information, into the sleep mode and updating information only for newly included sensor nodes at the setup phase using distance data. Furthermore, we enhance overall network efficiency by implementing secure and energy-efficient communication through key management robust against internal and external attacks in cluster-based routing techniques. This study suggests the modified cluster head selection scheme which uses the conserved energy in the steady-state phase by reducing unnecessary communications of unchanged nodes between selected cluster head and previous cluster head in the setup phase, and thus prolongs the network lifetime and provides secure and equal opportunity for being cluster head.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.6
• /
• pp.381-390
• /
• 2015

The efficient design of a transport protocol contributes to energy conservation as well as performance improvement in wireless sensor networks (WSNs). In this paper, a node-density-aware transport protocol (NDTP) for intra-cluster transmissions in WSNs for monitoring physical attributes is proposed, which takes node density into account to mitigate congestion in intra-cluster transmissions. In the proposed NDTP, the maximum active time and queue length of cluster heads are restricted to reduce energy consumption. This is mainly because cluster heads do more works and consume more energy than normal sensor nodes. According to the performance evaluation results, the proposed NDTP outperforms the conventional protocol remarkably in terms of network lifetime, congestion frequency, and packet error rate.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.91-96
• /
• 2012

Ad-hoc networks can be used various environment, which it is difficult to construct infrastructures, such as shadowing areas, disaster areas, war area, and so on. In order to support to considerable and various wireless services, more spectrum resources are needed. However, efficient utilization of the frequency resource is difficult because of spectrum scarcity and the conventional frequency regulation. Ad-hoc networks employing cognitive radio (CR) system that guarantee high spectrum utilization provide effective way to increase the network capacity. In CR based wireless ad-hoc networks, cluster-head decides the existence of primary user using sensing information of primary user from each ad-hoc device. However, it is still defective research to decide cluster head among the a lot of ad-hoc devices. So, in this paper, we show the decision method of cluster head in CR based wireless and detection probabilities of primary user based on decision method of cluster head.

• The Korean Journal of Franchise Management
• /
• v.7 no.1
• /
• pp.21-29
• /
• 2016

Purpose - The primary purpose of this study is to employ effective marketing methods using market segmentation of coffee shops by determining how motivations to visit coffee shops have different impacts on demographic profile of visitors and characteristics of coffee shop visits, so as to draw out a better understanding of customers of coffee market. Research design, data, and methodology - Data were collected using surveys of self-administered questionnaires toward coffee shop users in Daejeon, Korea. A number of samples used in data analysis were 253 excluding unusable responses. The data were analyzed through frequency, reliability, and factor analysis using SPSS 20.0. Factor analysis was conducted through the principal component analysis and varimax rotation method to derive factors of one or more eigen values. In addition, the cluster analysis, multivariate ANOVA, and cross-tab analysis were used for the market segmentation based on the types of motivation for coffee shop visits. The process of the cluster analysis is as follows. Four clusters were derived through hierarchical clustering, and k-means cluster analysis was then carried out using mean value of the four clusters as the initial seed value. Result - The factor analysis delineated four dimensions of motivation to visit coffee shops: ostentation motivation, hedonic motivation, esthetic motivation, utility motivation. The cluster analysis yielded four clusters: utility and esthetic seekers, hedonic seekers, utility seekers, ostentation seekers. In order to further specify the profile of four clusters, each cluster was cross tabulated with socio-demographics and characteristics of coffee shop visits. Four clusters are significantly different from each other by four types of motivations for coffee shop visits. Conclusions - This study has empirically examined the difference in demographic profile of visitors and characteristics of coffee shop visits by motivation to visit coffee shops. There are significant differences according to age, education background, marital status, occupation and monthly income. In addition, coffee shops use pattern characterization in frequency of visits to coffee shops, relationships with companion, purpose of visit, information sources, brand type, average expense per visit, important elements of selection attribute were significantly different depending on motivations for coffee shop visits.