• 한국의류학회지
• /
• 제32권11호
• /
• pp.1771-1781
• /
• 2008

The purpose of this study was to classify the casual image by clothing design elements. This research was done by survey method with 30 kinds of casual image photos selected in fashion magazines. The data was analyzed by Reliability Analysis, Factor Analysis, ANOVA, Duncan's test and MDS. The results of this study are as follows: 1. Casual image was classified by 6 factors. Those were classic-casual, modern-casual, romantic-casual, vintage-casual, sexy-casual and active-casual images. 2. Classic-casual image was well-expressed by A silhouette, fit, chromatic and chromatic color coordinations and hard texture. Modern-casual image was well-expressed by H silhouette, fit and achromatic and achromatic color coordinations. Romantic-casual image was well-expressed by A silhouette, fit and soft texture. Vintage-casual image was well-expressed by H silhouette, combination apparel-fit, chromatic and chromatic color coordinations and fade-out texture. Sexy-casual image was well-expressed by fitted silhouette, tight apparel-fit and combination texture. 3. Casual image was positioned into mostly dynamic and modern on image scale.

• 한국의류산업학회지
• /
• 제10권5호
• /
• pp.676-682
• /
• 2008

In this study a guideline of the 3D-fit pattern for the ECG(electrocardiogram) measurement of elderly's u-healthcare clothes was proposed. In the screening test of the ECG measurement band, ECG peak band was observable at the band pressure of 0.20 kPa. By employing a 3D body image, tight-fit 3D patterns were made at two different reduction rates of 21%(pattern 1) and 33%(pattern 2), and corresponding pressure of both of the clothes were 0.25 kPa and 0.54 kPa, respectively. Typical waves of ECG were found in both stationary and moving position. In terms of the subjective evaluation of the u-healthcare clothes when worn, it was confirmed that reduction pattern 1(0.25 kPa) conveyed comfortable clothing pressure and pleasantness, which is very close to the result of screening test of ECG band experiment. As results, it is recommended that reduction rate should be adjusted, so that clothing pressure is about 0.2 kPa for the elderly's comfortable and efficient u-healthcare clothes.

• 패션비즈니스
• /
• 제10권4호
• /
• pp.45-54
• /
• 2006

This study analyzed the purchasing behavior for underwear, with the subjects of pregnant women, and the trend of its fit preference and thereby looks into the practices of their clothing life to provide the basic data for the formation of maternity clothing industry, focusing on the underwear development in response to pregnant women's body type features. The conclusion were as follows: 1. The analysis of underwear wearing practices for the women in the pregnancy of eight months or longer and those after the delivery within one month showed that about 80-90% of them wore panties or brassieres and about 70% of them did not wear girdles, thus with a lower level for girdles than for panties or brassieres. 2. The surveys of the satisfaction and fit for two designs each with the high wearing frequency did not show any relatively significant difference in assessment by the design. The analysis of the satisfaction by the part with the maternity underwear indicated that in the case of panties the respondents were dissatisfied with the length as to be long, and also dissatisfied with waist circumference, abdomen circumference, private parts, and groin as to be small, reflecting that the circumference coverage of the panties in the market was not effectively managed.

• 한국지역사회생활과학회지
• /
• 제28권4호
• /
• pp.505-514
• /
• 2017

Although studies on the development of cool touch fabrics have been conducted widely, the effects of fitted pattern on enhancing the cooling sensation are insufficient. To investigate the effect of cool-touch fabric and fit of women's sports underwear, 3D and 2D patterns of sleeveless top and sports leggings were constructed. The performance of cool touch was tested by the Qmax value and wear test with nine subjects. Objective fit evaluation was observed by 3D virtual clothing using Clo software. Subjects rated wearing sensation such as 'cooling sensation, fit, wear comfort and preferences of purchase' using Likert's scale in the environmental chamber at $25^{\circ}C$, 45 %RH. The Qmax value of the cool touch fabric was higher than that of the PET fabric, which was well reflected in 'cooling sensation', especially in the case of a tight-fitted 3D pattern. The cooling sensation of the cool-touch fabric was not significantly elevated with 3D tight pattern as long as the size of the 2D pattern was similar to that of 3D pattern. However, the purchase preference was highly correlated with 3D fit and wear comfort.

• 한국의류학회지
• /
• 제29권9_10호
• /
• pp.1359-1368
• /
• 2005

When we develop the tight-fit 2D pattern from the 3D scan data, segmentation of the 3D scan data into several parts is necessary to make a curved surface into a flat plane. In this study, Garland's method of triangle simplification was adopted to reduce the number of data point without distorting the original shape. The Runge-Kutta method was applied to make triangular patch from the 3D surface in a 2D plane. We also explored the detailed arrangement method of small 2D patches to make a tight-fit pattern for a male body. As results, minimum triangle numbers in the simplification process and efficient arrangement methods of many pieces were suggested for the optimal 2D pattern development. Among four arrangement methods, a block method is faster and easier when dealing with the triangle patches of male's upper body. Anchoring neighboring vertices of blocks to make 2D pattern was observed to be a reasonable arrangement method to get even distribution of stress in a 2D plane.

• 한국의류산업학회지
• /
• 제24권6호
• /
• pp.766-774
• /
• 2022

In this study, the fit of commercial sports bras was analyzed according to various design variations, focusing on the shape of the shoulder strap, which is known to cause great discomfort in wearing sports bras. Experimental clothes were set to four commercially available sports bras with different shoulder strap shapes. The results showed that, in "size suitability," the overall satisfaction with experimental clothing B, of which the shoulder strap can be adjusted, was the highest, especially for "underbust circ. fit," "bust circ. Fit," and "shoulder strap length." In the "Shape suitability" and "Wearability" sections, experimental clothing B also showed the highest satisfaction and the shoulder strap adjustment device did not negatively affect wearing satisfaction. In the question on "side wings rolled up," experimental clothing A also received a relatively good score, which is due to its long front length. In the "Compression of the front center" section, the responses for experimental clothing A and B were "appropriate" and for C and D, they were "pressurized." In "motion suitability" as well, satisfaction with experimental clothing B was the highest, followed by experimental clothes A, C, and D. In the "body shape correction" section, clothing B elicited the highest satisfaction, followed by experimental clothes A, C, and D, in that order. Overall, it is recommended that shoulder straps be applied with adjustable straps for the comfort of the shoulder area while wearing sports bras.

• 패션정보와 기술
• /
• 제1권
• /
• pp.65-71
• /
• 2004

• 한국의류학회지
• /
• 제45권1호
• /
• pp.123-135
• /
• 2021

This study provides basic information for the convenient size selection of T-shirts in an online purchasing environment. The best preferred T-shirts fit was selected among five sizes of T-shirts according to body size group. The subjects were 103 students majoring in clothing. After setting a virtual model with her own body sizes, the subjects chose the best preferred fit among five sizes of T-shirts that included the one suitable to their bust circumference, two smaller T-shirts and two larger T-shirts. As a result, they preferred the fit of larger size T-shirts than body size, but they preferred a different fit by the body characteristic group such as waist height group and hip circumference group. T-shirt length was affected by waist height; in addition, shoulder ease was affected by hip circumference and bust circumference. Therefore waist height and hip circumference should be considerable sizes when consumers choose T-shirts sizes with a preferred fit.

• 한국의류학회지
• /
• 제32권2호
• /
• pp.340-347
• /
• 2008

A prototype of 3D clothing design system with a direct pattern development function was suggested, reflecting intuitive design functions and design modifications while considering the fit of clothing patterns with the 3D human body in the virtual 3D space. The research method was as follows. Clothing models were created using a 3D design tool, 3ds max on the surface of 3D human body model made by scanning an actual human body. 3D illustrations were completed by revising the fit and sizing of the human body and clothing models. 2D T-shirt pattern was produced 3D illustrations using from a 3D scanning data modeling solution RapidForm 2004, a 2D conversion program for 3D data called 2C-AN, and Yuka CAD. As a result, the following conclusions were made. The fit of the clothing and human body can be adjusted by reflecting individual body figure characteristics and 3D illustrations over the actual 3D body model. Furthermore, intuitive design support functions were intensified overcoming the weak point of existing 3D clothing design system by developing the direct clothing design in the virtual 3D space. 3D illustration design modifications can be directly reflected on clothing patterns from 3D illustrations by 3D clothing design system developed in this study.

• 한국의류학회지
• /
• 제31권2호
• /
• pp.308-318
• /
• 2007

This study aims to survey the satisfaction level with the fit of ready-made suits(jackets and pants) among adult males and thereby to show its differences by the age group and body type. The respondents to the questionnaire survey were 465 males, aged 20 through 59 years. The conclusions are as follows: 1. The average satisfaction level for the fit of each item ranged from 2.65 to 3.57, with the higher level found in jackets than in pants, and also in circumference parts than in length parts 2. The satisfaction level for the fit by the age of adult males showed inter-group differences in the parts of jacket length, sleeve length, shoulder width, sleeve openings, and sleeve band width for jackets; and pant length of pants. 3. The satisfaction level for the fit by the body type of adult males indicated into-group differences in chest circumference of jackets only. 4. The satisfaction level for the fit, with the exclusion of the age and body type relationship showed that adult males are affected more by the age than by the body type. 5. In the repair frequency by the item, pants(45.6%) showed a higher level than jackets(24.7%). The parts with a high repair level by the item were jacket length(8.4%) and steeve length(19.8%) for jackets; and pant length(42.4%) and waist circumference(8.4%) for pants.