• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.464-473
• /
• 2018

The objective of this study is to develop a sizing system of fitness clothing that can properly accommodate various body sizes of Korean senior women. The sizing system of upper and lower fitness clothing was developed in the present study by selection of key variables, identification of size category candidates, and determination of an optimal sizing system. First, key anthropometric dimensions (stature and bust circumference for upper clothing and stature; waist circumference for lower clothing) were identified by factor analysis on the direct body measurements (n = 272) and 3D whole-body scan data (n = 271) of Korean senior women in Size Korea. Second, sizing system candidates based on the key dimensions of upper and lower clothing were explored using a grid method and an optimization method. Lastly, among the sizing system candidates, optimal sizing systems of upper and lower clothing were selected in terms of accommodation rate. Five size categories (short/small, short/medium, tall/small, tall/medium, and tall/large) were selected as the optimal sizing systems of upper and lower clothing with 89% and 78% of accommodation rate, respectively, for the Korean senior women. The anthropometric characteristics of the representative humans of the optimal size categories would be of use in the design of fitness compressive wear for the better fit and effectiveness of exercise and health of Korean senior women.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.8 s.145
• /
• pp.1092-1101
• /
• 2005

The purpose of this study is to analyze the size of ready-made clothing for elderly women and to evaluate their fit according to body type. Subjects were 33 women aged 60 and older, and they were classified by stature and drop index. The size of clothing which manufactured by four apparel brands were measured and compared with body size, and the size designation of four brands was compared. The questionnaire was carried out to subjects, and the size recognition and dissatisfaction with ready-made clothing were analyzed. The fitting test were carried out, and the subjects evaluated the fit of jackets and slacks of four brands. In the result of questionnaire, we found that subjects had little recognition about their clothing size. Subjects responded that they often felt dissatisfaction in their jacket length, sleeve length, shoulder width, bust girth, slacks, and waist girth. We found that each apparel brands had different sizing system and that even if the size designation of label was same, the clothing size was quite different. So the elderly women who didn't have so much knowledge about their own clothing size had a tendency to confuse with choosing proper clothing for themselves. In the wearer's evaluation, the significant difference in the degree of unsatisfaction were certified in several body parts according to wearer's body type. Especially, the degree of unsatisfaction in the case of subjects of having very small stature or very small hip was higher than other body types. From the result, we certified that it was necessary to consider the characteristics of each body type to increase the satisfaction of elderly women with clothing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.3 s.162
• /
• pp.364-375
• /
• 2007

The propose of this study is to develop the optimal sizing system of ready-to-wear far elementary school boys using a newly invented statistical technique. The body measurements was classified by the method that equalizes the distribution of the subjects using the probability density function, to theoretically systemize a method to determine a size range of ready-to-wear for elementary school boys between 7 to 12 yeiws old. The results were as follows: 1. Height group includes 9 types of heights: 115, 120, 125, 130, 135, 140, 145, 150 and 155. 2. In the case of short children's groups, the variance in bust girth and waist girth is narrow. The people cluster together around the average. The size deviation of ready-to-wear is small. 3. In the case of tall children's groups, the variance in bust girth and waist girth is wide. The people spread widely around the average. The size deviation of ready-to-wear is large. 4. The optimal size system is suggested considering the weight of growth exponent of children according to their respective ages. Clothing companies can selectively choose sizes that meet the target of their brands. 5. It suggests the body sizes chart, which based on their means by the middle size children for each height group, so that clothing companies make use of it.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.1
• /
• pp.1-16
• /
• 2021

This study classified short adult male body types and identified characteristics by body type according to Size Korea's 7th human system measurement data for men in their 20s to 60s. There were four body types for short adult males. Type 1 was a 'short bird legs-normal body shape' with an average body size, low body height, short torso length, thin legs, and no sagging shoulders. Type 2 was a 'short torso thin body' with a small body size, a slim body, a high body height, a short torso length and no sagging shoulders. Type 3 was a 'thick leg-overweight body shape' with a large body size, thick legs, low body height, small shoulder length and obesity. Type 4 was a 'long bird legs-normal body' with a normal body size, high body height, thin legs, long torso and sagging shoulders. The development of clothing design and pattern reflecting the body shape characteristics of short adult males should be improved to fit clothing and suitability. It is necessary to increase the satisfaction of ready-to-wear for consumers with various body types by adding the size for shorter men through a subdivision of the ready-made size system.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.5
• /
• pp.827-839
• /
• 2009

Sizing system of Korean structural firefighting protective clothing that is national approved should be met for specification of structural firefighting protective clothing that is identified by Ministry of Public Administration and Security(MOPAS). However if you look over the specification of sizing system, the standard is based on only 'height' and the others are indicated as the size of completed product. KS K ISO 13688 and EN 340 which is met on ISO 13688 which indicates sizing system about protective clothing has the standards of height, chest and waist circumference. Also NFPA 1971 that has standards of sizing system is based on chest circumference, cervical to wrist length, waist circumference and inseam. That is different from Korean standards. Therefore, fire fighting protective clothing standards which is based on only height should be compensated and not be relied on foreign standards like ISO. It is indispensable for developing our own sizing system of structural fire fighting protective clothing. In this studying, Korean new sizing system of structural fire fighting protective clothing was developed for providing basic information of ergonomic structural fire fighting protective clothing. The analyzed target age was between 20 and 59 years old fire fighter who extinguish the fire. And it was analyzed by 3D measurement among data of the $5^{th}$ Size Korea. On conclusion, in case of structural fire fighting protective clothing coat, physical dimension was to be chest circumference, cervical to wrist length. Three dimensions as 5cm space of circumference and four dimensions as 2.5cm space of cervical to wrist length were derived, which means that totally 12 dimensions were defined. Dimension standards of pants was based on the analysis of waist circumference and crotch height. Six dimensions as 5cm space of waist circumference and three dimensions as 5cm space of crotch height were derived, which means that totally 14 dimensions were defined.

• Fashion & Textile Research Journal
• /
• v.6 no.3
• /
• pp.347-356
• /
• 2004

The purpose of this study is to analyze the sizing system and size designation of ready-made jackets for women. We survey the sizing system and size labeling that have been used and presently practiced by the domestic garment industry of ready-made woman's jacket. In addition, 264 tailored jackets are measured for the sake of this study. The jackets are classified into 3 groups(young, missy, and madame) according to the target age of the brand. The result shows that size labeling involves body measurements(85-94-160), size code(55, 66) or simplified letter(S, M, L). However, the correspondence of size information and ease tolerances of jackets is not consistent and each company has its own sizing system. There are significant differences among young, missy, and madame group on the bust girth of apparel in 66size code. The average apparel size piteh measurement distributions(bust girth and hip girth respectively) of young group are 9cm and 13cm in 55 size code, those of missy group are 7 em and 3 cm in 66 size code, and those of madame group are 6cm and 4cm in 77 size code. The ease of bust girth and hip girth in missy group are much more than other groups.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.3
• /
• pp.17-29
• /
• 2023

This study collected and analyzed reference information on the size labeling method and size of clothing products in 13 online shopping malls for plus size women in their 20s and 30s, and compared the size specification information focusing on jeans. First, in the results of examining the method of clothing size designation, clothing sizes indicated by 1, 2, 3 or physique designation (M, L, XL) differed between shopping malls, and even in the same shopping mall, even if the same size notation was used. Most the clothing sizes were different depending on the type of clothing. For bottoms, it was found that one company used seven size designation methods at the same time, two shopping malls used four size designation methods, and five shopping malls used three size designation methods. In the meantime, in the results of comparing the size specifications of jeans XL (size 88, 32 inches) by product part, for waist and hip circumferences, each of the eight companies showed that the size was smaller than the body size suggested by KS adult women's wear.

• Fashion & Textile Research Journal
• /
• v.6 no.4
• /
• pp.475-484
• /
• 2004

The purpose of this study was to suggest the standard sizing system and grading rules according to body types of elderly women. The data were the anthropometric measurements of 329 women aged 60 and older measured in 2001. To determine the effective and useful clothing sizing system, the distribution of hip girth and bust girth of 3 body types which were suggested in KS K 0055 was analyzed, and the significant difference among adjoining hip girth ranges was analyzed, too. And the sizes of major body parts that were used for manufacturing clothing were made to have regular interval between each clothing sizes. From this study, we certified that each different sizing system for 3 body types to manufacture more suitable clothing for elderly women was necessary and suggested the standard size for each body type. And we also suggested the patternmaking sizes that were needed to manufacture ready-made clothing. On the basis of standard size, we suggested the grading rules for 3 body types. And we verified the propriety of the grading rules for 3 body types through the fitting test, and we knew that the grading rules for 3 body types of this study was very useful to manufacture clothing for elderly women.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.4
• /
• pp.521-529
• /
• 2000

This paper proposed the sizing system for women's upper clothes in order to improve clothing fitness and raise the productivity. The sizing system was classified according to 5 body types and 5 age groups. The size intervals of the basic dimensions were established at regular intervals centering around their means. The size interval of stature was 8cm centering around 158cm and that of bust girth 4cm centering around 84cm and that of hip girth 4cm centering around 92cm. Frequency distribution on the size of upper clothes showed that the most frequent size were 96-96-150 in the longest-fattest type, 88-96-158 in the long-fatter type, 84-92-158 in the medium length-fat type, 84-92-166 in the Short-balanced type, and 76-88-158 and 80-88-158 in the medium length-balanced type. The number of the sizes of upper clothes, which had frequencies more than 5%, was 32 and each size was presented with waist girth, back waist length and sleeve length. The size system classified by age group had 22 cases in the early twenties, 15 cases in the late twenties, 21 cases in the early thirties, 19 cases in the late thirties, and 15 cases in the forties.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.184-195
• /
• 2017

Baseball is a life sport that gives vitality to people. However, currently available leg guards do not have a variety of sizes and it is very difficult to purchase a leg guard that is suitable for the size of a specific consumer. Therefore, this study investigated the size system of a leg guard sold in the market and suggested a grading deviation suitable for the legs of Korean males. The results of the study were as follows. First, most brands were sold only in three size systems as children's, teenagers, and adults. Adult size systems were not subdivided. Second, Korean male legs were classified into Group 1 (large girth and height and lower body muscle) and Group 2 (small girth and height and low underbody muscle). Third, the size system is based on vertical items such as height and mid-thigh circumference. Each group produced 10 sizes. The smallest height or the largest height was also found to be about 4.5 to 5.0cm smaller or larger than the sample size for each group. The total length of the leg guard was about 2.5cm when the height was increased or decreased by one size. It was confirmed that the deviation of the circumference of the mid-thigh should be about 2.0cm larger or smaller than the sample size even if the height is the same. The deviation of the knee circumference and ankle circumference was smaller than the other circumference. In conclusion, the dimension combinations of the leg guard must be set differently to provide a leg guard with high size suitability according to leg type.