• 제목/요약/키워드: Clothing Industry

검색결과 2,475건 처리시간 0.032초

The Legal and the Official Management System Status of the Agricultural Disease, Injury, and Accidents of Korean (한국 농업인 업무상 재해에 대한 법적 행정적 지원체계 고찰)

  • Lee, Kyung-Suk;Choi, Jeong-Wha;Kim, Hyo-Cher;Kang, Tae-Sun
    • Journal of agricultural medicine and community health
    • /
    • 제31권3호
    • /
    • pp.219-236
    • /
    • 2006
  • Objectives: To develop a model of a official management system for agricultural disease, injury and accidents, We analyzed current Korean status and management system about occupational injury and accident of farmers. Methods: For national management systems of industry safety and health and current status of occupational injuries and accidents of farmers, related literature such as books, theses, articles, and web documents were collected and analyzed. Results and Conclusion: The regulations of protecting occupational injury and accidents of farmers are suggested as follows: (1)insurance and compensation act for occupational injury and accident of farmers, (2)setting standards of occupational injuries and accidents of farmers, (3)mandating the usage of safety devices for agricultural vehicles and equipments, (4)reporting occupational injuries and accidents that occur among farmers, (5)registering pesticides and assessing safety usage, (6)implementing safety training, (7)supporting personal protective equipments and agricultural safe facilities etc.

  • PDF

Formation and Change of Production Network based on Customer-following Overseas Expansion of Korean Subcontractors: Electronic Industries in Hanoi Red River Delta, Vietnam (한국 하청기업의 해외동반진출과 생산 네트워크 형성 및 변화: 베트남 하노이 권역 전자산업을 사례로)

  • Kim, Seonghun
    • Journal of the Economic Geographical Society of Korea
    • /
    • 제23권2호
    • /
    • pp.147-165
    • /
    • 2020
  • The aim of this study is to find out Korean electronic industries' production network in Hanoi Red River Delta, Vietnam and its change based on customer-following overseas expansion. In-depth interviews with Korean subcontractors were conducted to examine the characteristics of customer-following overseas expansion of Korean subcontractors. Korean subcontracting corporations in electronic industries have expanded into Vietnam as the suppliers to Korean transnational corporations. Since 1990s, Korean corporations have invested into Vietnam but since late 2000s its industrial and geographical concentration has been shifted from textile and clothing industries in Southern Vietnam to electronics in Northern Vietnam. The customer-following overseas expansion of the subcontractors has emerged in three aspects: physical proximity, asymmetrical inter-firm relations and organizational embeddedness. During the process of customer-following overseas expansion, Korean electronic industry production network was transplanted into Vietnam and partially modified. This is because the company's hierarchy and difficulties in changing its trading relationship have affected the process of advancing into overseas markets. Korean transnational corporations seek to establish a stable suppliers through expansion accompanying with its subcontractors, and providing financial and non-financial support to its subcontractors.

The effect of experiential marketing factors of fashion service applying 4th industrial revolution technology on customer acceptance and use : focusing on 3D printing, internet of things, and innovation (4차 산업 기술 패션 서비스 체험마케팅 요인이 소비자 수용과 이용에 미치는 영향 : 3D프린팅, 사물인터넷, 혁신성을 중심으로)

  • Jeong, So-Jeong;Rhee, Young-Ju
    • Journal of the Korea Fashion and Costume Design Association
    • /
    • 제21권3호
    • /
    • pp.93-108
    • /
    • 2019
  • This study analyzed the influence of experiential marketing factors of 3D printing and Internet services on technology acceptance factors and usage intention. Furthermore, we analyzed how the user's innovativeness shows the effect on the intention to use. Data acquired from a total of 518 college students was used for the final analysis, which was perfromed by SPSS 21.0 and AMOS 23.0 programs. The results of this study are as follows. We analyzed the influence of the experiential marketing factors of fashion service utilizing the 3D printing and the Internet of Things on the acceptance of technology and intention to use these technologies. As for 3D printing, first, sensory and behavioral factors are positively related to the acceptance of technology. Second, emotional and cognitive factors have negative effects on all technology acceptance. Third, relational factors did not show a significant influence on several conditions of technology acceptance. Fourth, the effects of technology acceptance on the willingness to use have a positive effect on several conditions factors, except the effort expectation. As for the result concerning the Internet of Things first, behavioral factors have a positive effect on all technology acceptance. Second, emotional factors have a negative effect on all technology acceptance. Third, cognitive factors did not have a significant effect on various conditions and showed negative effects on several factors. Fourth, sensory and relational factors did not affect the acceptance of technology. Fifth, the effects of technology acceptance on the intention to use are affected by several conditions, except for effort expectation. As a result of analyzing the moderating effects of user's innovativeness on the willingness to use, 3D printing did not show any significant effect on innovation. However, the Internet of Things has a significant influence on the user acceptance of technology acceptance.

Validity of a Simulated Practical Performance Test to Evaluate the Mobility and Physiological Burden of COVID-19 Healthcare Workers Wearing Personal Protective Equipment (COVID-19 감염병 대응 의료진용 개인보호복의 동작성 및 생리적 부담 평가를 위해 개발된 모의 작업 프로토콜의 타당도)

  • Kwon, JuYoun;Cho, Ye-Sung;Lee, Beom Hui;Kim, Min-Seo;Jun, Youngmin;Lee, Joo-Young
    • Fashion & Textile Research Journal
    • /
    • 제24권5호
    • /
    • pp.655-665
    • /
    • 2022
  • This study evaluated the validity of a newly developed mobility protocol examining the comfort functions and requirements of personal protective equipment (PPE) for COVID-19 healthcare workers. Eight males (age: 24.7 ± 3.0 y, height: 173.4 ± 2.3 cm, and body weight 69.9 ± 3.7 kg) participated in the following three PPE conditions: (1) Plastic gown ensemble, (2) Level D ensemble, and (3) Powered air purifying respirator (PAPR) ensemble. The mobility protocol consisted of 10 different tasks in addition to donning and doffing. The 10 tasks were repeated twice at an air temperature of 25oC with 74% RH. The results showed significant differences among the three PPE conditions in mean skin temperature, local skin temperatures (the forehead, thigh, calf, and foot), clothing microclimate (the chest and back), thermal sensation, thermal comfort, and humidity sensation, while there were no significant differences in heart rate or total sweat rate. At rest, the subjects felt less warm and more comfortable in the PAPR than in the Level D condition (P<0.05). However, subjective perceptions in the PAPR and Level D conditions became similar as the tasks progressed and mean skin and leg temperature became greater for the PAPR than the Level D condition (P<0.05). An interview was conducted just after completing the mobility test protocol, and suggestions for improving each PPE item were obtained. To sum up, the mobility test protocol was valid for evaluating the comfort functions of PPE for healthcare workers and obtaining requirements for improving the mobility of each PPE item.

Polycyclic Aromatic Hydrocarbons in Industrial Organic Sludge from Wastewater Treatment Facilities in Korea (폐수처리시설에서 발생된 유기성 슬러지에 함유된 다환방향족탄화수소의 농도 특성)

  • Nam, Seong-Nam;Lee, Mi-Young;Yeon, Jinmo;Jeon, Taewan;Shin, Sun Kyoung
    • Journal of Korean Society of Environmental Engineers
    • /
    • 제34권8호
    • /
    • pp.574-582
    • /
    • 2012
  • This study presents the concentrations of the polycyclic aromatic hydrocarbons (PAHs) listed as priority pollutants by United States Environmental Protection Agency (US EPA), in 98 sludges from 54 industrial wastewater treatment facilities of South Korea. The mean concentrations of ${\Sigma}_{16}PAHs$ were ranged from 32.5 ${\mu}g/kg-dw$ to 1189.3 ${\mu}g/kg-dw$ by industries, and the highest content was found in the petrochemical industry, followed by chemical, clothing manufacturing and dying, pulp and papermaking, secondary wastewater treatment, and food/beverage producing industries. Comparisons to the EU and Danish standards of ${\Sigma}_{16}PAHs$ in sewage sludge for land application showed only two samples (one from petrochemical, and the other from chemical industry) exceeded the limits. ANOVA test with PAH concentrations as variables revealed no statistically significant influences by industrial types and sampling time (i.e., seasonal variations). Pearson correlations between individual PAHs showed strong relationships (r>0.7) among 4-ring PAHs. Concentrations of acenaphthylene, anthracene, fluoranthene, benzo(a)anthracene, benzo(f)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene presented strong correlations to ${\Sigma}_{16}PAHs$. Principal component analysis discriminated entire samples into three groups by two principal components (PC1 and PC2) with 70% of data variations, in which industrial types were not of importance, but a dominance of certain PAHs. Samples in group-I, which is high PC1 and low PC2, were characterized by a dominance of 2-ring PAHs, and in group-II, PC1 and PC2 showed a linear relation, was dominant 4-ring PAHs. Group-III with low PC1 and high PC2 includes 17 samples showing a noticeably high contribution of 3-ring PAHs to ${\Sigma}_{16}PAHs$. This study provides concentrations of PAHs in industrial sludges collected from a wide variety of sources (six industrial types) and two seasons of sampling events, and the comparison of ${\Sigma}_{16}PAHs$ with other studies are also discussed.

4D Printing Materials for Soft Robots (소프트 로봇용 4D 프린팅 소재)

  • Sunhee Lee
    • Fashion & Textile Research Journal
    • /
    • 제24권6호
    • /
    • pp.667-685
    • /
    • 2022
  • This paper aims to investigate 4D printing materials for soft robots. 4D printing is a targeted evolution of the 3D printed structure in shape, property, and functionality. It is capable of self-assembly, multi-functionality, and self-repair. In addition, it is time-dependent, printer-independent, and predictable. The shape-shifting behaviors considered in 4D printing include folding, bending, twisting, linear or nonlinear expansion/contraction, surface curling, and generating surface topographical features. The shapes can shift from 1D to 1D, 1D to 2D, 2D to 2D, 1D to 3D, 2D to 3D, and 3D to 3D. In the 4D printing auxetic structure, the kinetiX is a cellular-based material design composed of rigid plates and elastic hinges. In pneumatic auxetics based on the kirigami structure, an inverse optimization method for designing and fabricating morphs three-dimensional shapes out of patterns laid out flat. When 4D printing material is molded into a deformable 3D structure, it can be applied to the exoskeleton material of soft robots such as upper and lower limbs, fingers, hands, toes, and feet. Research on 4D printing materials for soft robots is essential in developing smart clothing for healthcare in the textile and fashion industry.

Agency Costs of Clothing Companies with Famous Brand (유명 의류 상호 기업의 대리인 비용에 관한 연구)

  • Gong, Kyung-Tae
    • Management & Information Systems Review
    • /
    • 제36권4호
    • /
    • pp.21-32
    • /
    • 2017
  • Motivated by the recent cases of negligent social responsibility as manifested by foreign luxury fashion brands in Korea, this study investigates whether agency costs depend on the sustainability of different types of corporate governance. Agency costs refer either to vertical costs arising from the relationship between stockholders and managers, or to horizontal costs associated with the potential conflicts between majority and minority stockholders. The firms with luxury fashion brand could spend large sums of money on maintenance of magnificent brand image, thereby increasing the agency cost. On the contrary, the firms may hold down wasteful spending to report a gaudily financial achievement. This results in mitigation of the agency cost. Agency costs are measured by the value of the principal component. First, three ratios are constructed: asset turnover, operating expense to sales, and earnings before interest, tax, and depreciation. Then, the scores of each of these ratios for individual firms in the sample are differenced from the ratios for the benchmark firm of S-OIL. S-OIL was designated as the best superior governance model firm for 2013 by CGS. We perform regression analysis of each agency cost index, luxury fashion brand dummy and a set of control variables. The regression results indicate that the agency costs of the firms with luxury fashion brand exceed those of control group in the fashion industry in the part of operating expenses, but the agency cost falls short of those of control group in the part of EBITD, thus the aggregate agency costs are not differential of those of the control group. In sensitivity test, the results are same that the agency cost of the firms are higher than those of the matching control group with PSM(propensity matching method). These results are corroborated by an additional analysis comparing the group of the companies with the best brands with the control group. The results raise doubts about the effectiveness of management of the firms with luxury fashion brand. This study has a limitation that the research has performed only for 2013 and this paper suggests that there is room for improvement in the current research methodology.

  • PDF

A Survey on the Workplace Environment and Personal Protective Equipment of Poultry Farmers (양계 농업인의 작업장 환경 및 개인보호구 착용 실태조사)

  • Kim, Insoo;Kim, Kyung-Ran;Lee, Kyung-Suk;Chae, Hye-Seon;Kim, Sungwoo
    • Journal of Environmental Health Sciences
    • /
    • 제40권6호
    • /
    • pp.454-468
    • /
    • 2014
  • Objectives: This study was conducted to investigate the actual condition of the farm work environment and personal protective equipment as part of the effort to improve livestock work for the safety and health of poultry farmers and provide basic data for establishing plans to improve and develop personal protective equipment. Methods: For this purpose, a questionnaire survey on general information about stables, the poultry work environment, accidents, the wearing of work clothes and personal protective equipment, and the level of awareness related to personal protective equipment was conducted among 148 poultry farmers. Results: As a result, it was found that poultry workplace environment was exposed to such risks as fine dusts; organic dusts; poisonous gases; odorous substances; chicken excrement; contact with chickens, bacteria or viruses; and accidents related to machine operation. Thirteen percent of respondents suffered severe respiratory diseases, and the most frequently injured sites due to accidents were the hands (25.7%), knees (23.8%), arms (17.3%), and head (10.9%). The most frequent type of accident was collisions between the body and obstacles or machinery during movement (36.4%), followed by erroneous machine operation such as feeders and electric shocks (8.5%). Regarding the wearing of work clothes and personal protective equipment, 51.7% of the respondents wore worn-out clothing or everyday clothes, whereas only 32.0% wore work clothes. The percentage of farmers who wore proper protective equipment for the work environment during poultry work was 48.4%. The most frequently used type of protective equipment was boots (38.9%), followed by mask (36.7%), gloves (36.3%), appropriate work clothes (22.6%), quarantine clothes (17.6%), helmets (13.4%), and goggles (12.6%). The rate of wearing goggles was low because they were considered inconvenient and lowered work efficiency. Furthermore, they purchased everyday products available on the market for their personal protective equipment which were not appropriate for maintaining safety in an actual harmful environment and its consequent risks. As a result of the survey of the awareness level related to personal protective equipment, their levels of awareness of accidents and attitude proved to be average or higher, but the practice of wearing protective equipment and the level of knowledge and management of personal protective equipment were lower. Conclusion: This survey found that the wearing status of personal protective equipment among poultry farmers was insufficient even though they were exposed to risks. Most respondents were aware of the necessity of wearing personal protective equipment and of the potential for accidents, but they did not wear proper protective equipment. Their wearing rate was low due to a lack of knowledge about protective equipment, as well as the inconvenience of wearing it. Therefore there is a need to improve and develop specialized personal protective equipment for respiration, hands, and eyes, as well as work clothes that can protect farmers from major harmful matter that is generated in the poultry workplace. Based on the results of this investigation, we will conduct further studies on the required performance and design directions of personal protective equipment while collecting more objective data through field-oriented assessments.

Survey of the Status of Conutry-of-origin Lables and Hygine on the Meat Markets of 4 Regions in Korea (4개 권역 축산물 판매업소의 원산지 표시실태 및 위생상태 표본조사)

  • Nam, Bo-Ra;Nam, Jung-Oak;Park, Jung-Min;Lee, Ra-Mi;Gu, Hyo-Jung;Kim, Myung-Hee;Chang, Un-Jae;Suh, Hyung-Joo;Kim, Jin-Man
    • Food Science of Animal Resources
    • /
    • 제27권1호
    • /
    • pp.122-126
    • /
    • 2007
  • Expenditure on meat and meat products has been increased in Korea due to the increase of income and the change of diet. From raising farm animals to eating the meat, various hazardous elements can make their ways into the meat and meat products. Recently the issues on food safety and hygiene are drawing a lot of attention, and the current system for managing the safety of foods is still needed to be improved. This survey was aimed to monitor the current situation of country-of-origin labels and hygiene for the meat markets at 4 regions Korea. The survey was performed by collecting samples from whole- sale and retail stores in the nation, which were selling beef. The markets were divided into groups as to territory and the size of the market (Large size, Medium size, and Small size). In terms of size distribution, small butcher shops occupied the highest percentage. On the itemized suitability test of unpacked and packed beef, all the market of 4 regions showed good agreements. However, such labels indicating the methods of cooking and storage were not properly posted on the products. Especially for Ho-nam region, corrections are needed. The results of monitoring sanitation conditions for the butcher shops at 4 regions in Korea showed relatively low suitability. Especially, there were serious lack of knowledge about wearing the sanitation clothing, caps, and shoes. The problem with food safety is so complicated that producer, consumer, food manufacturer, the press, the government, and scholar should solve altogether. It is necessary to educate farmers, food handlers, consumers, etc. and provide them with an accurate information and knowledge.

Wearable Computers

  • Cho, Gil-Soo;Barfield, Woodrow;Baird, Kevin
    • Fiber Technology and Industry
    • /
    • 제2권4호
    • /
    • pp.490-508
    • /
    • 1998
  • One of the latest fields of research in the area of output devices is tactual display devices [13,31]. These tactual or haptic devices allow the user to receive haptic feedback output from a variety of sources. This allows the user to actually feel virtual objects and manipulate them by touch. This is an emerging technology and will be instrumental in enhancing the realism of wearable augmented environments for certain applications. Tactual displays have previously been used for scientific visualization in virtual environments by chemists and engineers to improve perception and understanding of force fields and of world models populated with the impenetrable. In addition to tactual displays, the use of wearable audio displays that allow sound to be spatialized are being developed. With wearable computers, designers will soon be able to pair spatialized sound to virtual representations of objects when appropriate to make the wearable computer experience even more realistic to the user. Furthermore, as the number and complexity of wearable computing applications continues to grow, there will be increasing needs for systems that are faster, lighter, and have higher resolution displays. Better networking technology will also need to be developed to allow all users of wearable computers to have high bandwidth connections for real time information gathering and collaboration. In addition to the technology advances that make users need to wear computers in everyday life, there is also the desire to have users want to wear their computers. In order to do this, wearable computing needs to be unobtrusive and socially acceptable. By making wearables smaller and lighter, or actually embedding them in clothing, users can conceal them easily and wear them comfortably. The military is currently working on the development of the Personal Information Carrier (PIC) or digital dog tag. The PIC is a small electronic storage device containing medical information about the wearer. While old military dog tags contained only 5 lines of information, the digital tags may contain volumes of multi-media information including medical history, X-rays, and cardiograms. Using hand held devices in the field, medics would be able to call this information up in real time for better treatment. A fully functional transmittable device is still years off, but this technology once developed in the military, could be adapted tp civilian users and provide ant information, medical or otherwise, in a portable, not obstructive, and fashionable way. Another future device that could increase safety and well being of its users is the nose on-a-chip developed by the Oak Ridge National Lab in Tennessee. This tiny digital silicon chip about the size of a dime, is capable of 'smelling' natural gas leaks in stoves, heaters, and other appliances. It can also detect dangerous levels of carbon monoxide. This device can also be configured to notify the fire department when a leak is detected. This nose chip should be commercially available within 2 years, and is inexpensive, requires low power, and is very sensitive. Along with gas detection capabilities, this device may someday also be configured to detect smoke and other harmful gases. By embedding this chip into workers uniforms, name tags, etc., this could be a lifesaving computational accessory. In addition to the future safety technology soon to be available as accessories are devices that are for entertainment and security. The LCI computer group is developing a Smartpen, that electronically verifies a user's signature. With the increase in credit card use and the rise in forgeries, is the need for commercial industries to constantly verify signatures. This Smartpen writes like a normal pen but uses sensors to detect the motion of the pen as the user signs their name to authenticate the signature. This computational accessory should be available in 1999, and would bring increased peace of mind to consumers and vendors alike. In the entertainment domain, Panasonic is creating the first portable hand-held DVD player. This device weight less than 3 pounds and has a screen about 6' across. The color LCD has the same 16:9 aspect ratio of a cinema screen and supports a high resolution of 280,000 pixels and stereo sound. The player can play standard DVD movies and has a hour battery life for mobile use. To summarize, in this paper we presented concepts related to the design and use of wearable computers with extensions to smart spaces. For some time, researchers in telerobotics have used computer graphics to enhance remote scenes. Recent advances in augmented reality displays make it possible to enhance the user's local environment with 'information'. As shown in this paper, there are many application areas for this technology such as medicine, manufacturing, training, and recreation. Wearable computers allow a much closer association of information with the user. By embedding sensors in the wearable to allow it to see what the user sees, hear what the user hears, sense the user's physical state, and analyze what the user is typing, an intelligent agent may be able to analyze what the user is doing and try to predict the resources he will need next or in the near future. Using this information, the agent may download files, reserve communications bandwidth, post reminders, or automatically send updates to colleagues to help facilitate the user's daily interactions. This intelligent wearable computer would be able to act as a personal assistant, who is always around, knows the user's personal preferences and tastes, and tries to streamline interactions with the rest of the world.

  • PDF