• 한국연소학회지
• /
• 제13권3호
• /
• pp.24-32
• /
• 2008

Steady Laminar Flamelet Model (SLFM) calculation is performed to compare the turbulent combustion characteristics of air combustion and oxy-combustion with $CO_2$ recirculation. Radiative heat loss is considered by the optically thin limit assumption. For more realistic simulation the first-order conditional moment closure(CMC) model is applied to SANDIA PILOTED FLAME D again for the oxidants of air and mixture of $O_2$ and $CO_2$. The chemical kinetic machanism for methane is GRI Mech 3.0. Results show that oxy flames are much more stable than air flames, while comparable stability is maintained with 65% $CO_2$ recirculation. The comparable peak temperature is maintained with 80% $CO_2$ recirculation. Higher the temperature, higher the fractions of intermediate species, CO and OH, due to dissociation.

• 대한기계학회논문집
• /
• 제8권2호
• /
• pp.133-140
• /
• 1984

본 연구에서는 이러한 2유체방정식모델을 Stokes의 저항력 뿐만 아니라 벽면 의 영향을 함께 노고하여 벤츄리관에서의 정압강하가 공기류량과 고체유량, 그리고 입 자의 크기에 어떻게 의존하는가를 해석하였다. 본 연구의 수치해석결과를 Farbar와 Lee와 Crowe의 실험과 비교하였으며, 만족할 만한 일치를 얻었다.

• 한국수자원학회논문집
• /
• 제30권2호
• /
• pp.119-129
• /
• 1997

울산지역의 해륙풍장을 해석하기 위해 3차원 중규모 지역기상 수치모형을 개발하여 흐름장의 변동을 수치해석하였다. 식생의 영향을 고려한 지표면 열수지모형을 이용하여 지표면의 온도 및 습도를 결정하도록 하였다. 그리고 접지층에서의 연직방향 확산계수는 Businger의 모형을, Eckman층에서는 Yamada의 난류 closure모형을 사용하여 계산하였다. 그 결과 울산지역의 해륙풍장의 거동특성을 해석하는데 있어서 본 모형은 효과적임을 알 수 있었다.

• 터널과지하공간
• /
• 제12권4호
• /
• pp.304-311
• /
• 2002

절리의 기하학적 특성이 절리의 수직변형 및 투수성에 미치는 영향에 대해 수치해석적 방법을 통해 연구하였다. 실험적 계측 결과에 의하면, 절리의 간극은 통계적 방법에 의해 묘사되며 이에 근거하여 수치해석에 사용할 수 있는 절리를 모사할 수 있었다. 이를 위해. 자동 상관관계 함수를 이용하여 다양한 공간 상관길이의 인공 절리를 발생하였으며, 이를 토대로 수직변천 모델 및 수리해석 모델을 개발하였다. 수직변형 모델은 수직응력에 의한 절리면의 압축과 변형을 고려하여 절리의 변형거동을 해석하려 시도하였으며, cubic law에 근거한 유한차분법을 이용하여 수리해석을 수행하였다. 여러 가지 공간 상관길이의 인공 절리에 대한 수직변형 거동 및 이에 따른 수리해석의 결과, 간극의 공간 상관길이가 증가함에 따라 절리의 수직변형 및 투수성 감소가 분명하였다. 절리의 수직강성 역시 간극의 상관길이에 영향을 받는 것으로 나타났으며, 이로 인해 절리의 투수성이 수직강성과 내재적 관계가 있음을 유추할 수 있겠다. 본 연구 결과는 공학적 프로젝트로 인한 절리 암반의 수리-역학적 거동을 이해하는데 공헌할 것으로 사료된다.

• 한국임상수의학회지
• /
• 제39권6호
• /
• pp.353-359
• /
• 2022

Several suture patterns can be used for cystotomy closure, and a continuous suture pattern is the most commonly used. In this study, the fluid-tight ability and other suitabilities of continuous appositional sutures, such as the simple continuous suture pattern (SC), running suture pattern (RN), and Ford interlocking suture pattern (FI), were compared for cystotomy closure. Cystotomy closure was performed using each suture method in 10 cases of ex vivo swine bladders in each group. Suture time, leakage site, suture length, bursting pressure (BP), bursting volume (BV), and circular bursting wall tension (CBWT) were measured. Suture time and suture length were the shortest in RN and the longest in FI. Leakage occurred in two places: the incision line directly and the hole made by the suture. Leakage occurred through the incision line in 4 bladders of the RN group and 2 bladders of the FI group, but not in the SC group, and in the rest of the bladders, leakage occurred through the suture hole. The values of BP, BV, and CBWT increased in the order of FI, SC, and RN. Suture time and suture length can be considered as factors related to healing and side effects. In this study, leakage through the incision was found in a less appositional area; therefore, leakage through the hole could be considered an indicator of better apposition. Good apposition is one of the conditions required for ideal cystotomy closure. The bursting strength representing the fluid-tight ability can be expressed as the CBWT. RN is expected to be efficient and cause a small degree of foreign body reaction; however, it is expected to be less stable. FI has the greatest fluid-tightness ability, but it has been proposed that side effects due to foreign body reactions most frequently occur in FI. In conclusion, SC, which is expected to have a sufficient degree of fluid-tightness and appropriate recovery, is preferable to other continuous appositional suturing methods for cystotomy closure.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.628-640
• /
• 2021

To investigate the supercavity geometry and gas flow structure for the supercavities with two closure types under the different flow conditions, an inhomogeneous multiphase model with the SST turbulence model was established, and validated by experimental results. The results show that two distinct regions exist inside the supercavity, which include the downstream flow region along the gas-water interface and the reverse flow region. For the twin-vortex supercavity, the internal gas leaks from the supercavity boundary by two paths: the supercavity surface and the two-vortex tubes. Increasing Froude number leads to more internal gas stripped from the supercavity surface. Two types of gas loss exist for the re-entrant jet supercavity with high Froude number, one type is the steady process of gas loss, and the major gas-leaking path is the supercavity surface rather than supercavity closure region. The other type is the unsteady periodic ejection, and the gas cluster of periodic ejection is merely a small part of the gas stored inside the supercavity.

• 한국산업융합학회 논문집
• /
• 제3권2호
• /
• pp.141-147
• /
• 2000

The nonlinear response statistics of an autoparameteric system under broad-band random excitation is investigated. The specific system examined is a vibration absorber system with internal resonance, which is known to be a good model for a variety of engineering systems, including ship motions with nonlinear coupling between pitching and rolling motions. The Fokker-Planck equations is used to generate a general first-order differential equation in the dynamic moment of response coordinates. By means of the Gaussian closure method the dynamic moment equations for the random responses of the system are reduced to a system of autonomous ordinary differential equations. The jump phenomenon was found by Gaussian closure method under random excitation.

• 소음진동
• /
• 제8권4호
• /
• pp.715-722
• /
• 1998

An investigation into the stochastic bifurcation and response statistics of an autoparameteric system under broad-band random excitation is made. The specific system examined is a spring-pendulum system with internal resonance, which is known to be a good model for a variety of engineering systems, including ship motions with nonlinear coupling between pitching and rolling motions. The Fokker-Planck equations is used to genrage a general first-order differential equation in the dynamic moment of response coordinates. By means of the Gaussian and non-Gaussian closure methods the dynamic moment equations for the random responses of the system are reduced to a system of autonomous ordinanary differential equations. In view of equilibrium solutions of this system and their stability we examine the stochastic bifurcation and response statistics. The analytical results are compared with results obtained by Monte Carlo simulation.

• 한국정밀공학회지
• /
• 제12권4호
• /
• pp.127-134
• /
• 1995

The dynamic characteristics of a system can be critically influenced by system uncertainty, so the dynamic system must be analyzed stochastically in consideration of system uncertainty. This study presents a generalized stochastic model of dynamic system subjected to bot external and parametric nonstationary stochastic input. And this stochastic system is analyzed by a new stochastic process closure method and moment equation method. The first moment equation is numerically evaluated by Runge-Kutta method. But the second moment equation is founded to constitute an infinite coupled set of differential equations, so this equations are numerically evaluated by cumulant neglect closure method and Runge-Kutta method. Finally the accuracy of the present method is verified by Monte Carlo simulation.

• 한국전산유체공학회지
• /
• 제12권2호
• /
• pp.26-31
• /
• 2007

A comparative study on the treatment of the turbulent heat flux with the elliptic blending second-moment closure for a natural convection flow is performed. Three cases of different treating the turbulent heat flux are considered. Those are the generalized gradient diffusion hypothesis (GGDH), the algebraic flux model (AFM) and the differential flux model (DFM). The constants in the models are adjusted with a primary emphasis placed on the accuracy of predicting the local Nusselt number. These models are implemented in a computer code specially designed for evaluation of turbulent models. Calculations are performed for a turbulent natural convection in the 1:5 rectangular cavity and the calculated results are compared with the available experimental data. The results show that the three models produce nearly the same accuracy of solutions. These results show that the GGDH, AFM and DFM models for treating the turbulent heat flux are sufficient for this simple shear flow where the shear production is dominant. It is observed that, in the weakly stratified region at the center zone of the cavity, the vertical velocity fluctuation is nearly zero in the GGDH solutions, which shows that the GGDH model may not be suitable for the strongly stratified flow. Thus, further study on the strongly stratified flow should be followed.