• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.13-18
• /
• 2003

This paper proposes a design method of PID controllers in the framework of a constrained optimization problem. Owing to the popularity for the controller's simplicity and robustness, a great deal of literature concerning PID control design has been published, which can be classified into frequency-based and time-based approaches. However, both approaches have to be considered together for a designed PID control to work well with a guaranteed closed-loop stability. For this purpose, a penalty function is formulated to satisfy both frequency- and time-domain specifications, and is minimized by a recet nonlinear optimization algorithm to attain optimal PID control gains. The proposed method is compared with Wang's and Ho's methods on a suite of example systems. Simulation results show that the PID control tuned by the proposed method improves time-domain performance without deteriorating closed-loop stability.

• Journal of Power System Engineering
• /
• v.7 no.1
• /
• pp.34-41
• /
• 2003

A method is presented for generating the path which significantly reduces residual vibration of a flexible robot manipulator and applying control theory to track the desired path. The desired path is optimally designed so that the system completes the required move with minimum residual vibration. A closed loop control theory is applied to track the planned path in the case of load variation. Specifically, it is desired that the optimally designed path has a better trajectory tracking capabilities during the residual vibration over the cycloidal path, in various cases of load. Perturbation adaptive control is used as closed loop control scheme. A planar two link manipulator is used to evaluate this method.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.111-114
• /
• 2003

In this paper, we consider the stabilization and $H_\infty$ control of linear systems with static output feedback control. The static output feedback control represents the simplest closed-loop control that can be realized in practice, and, moreover, it is less expensive to be implemented and is more reliable. In spite of its advantages, it is one of the open problems which is not sloved analytically or numerically yet. After decompose the closed-loop system into feedback form, by adopting the small gain theorem, we obtain a sufficient condition for stabilization and a sufficient condition for It control expressed as linear matrix inequalites. Finally, we show the usefulness of our results by a numerical example.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.591-597
• /
• 2009

The problem of controlling a finite-state asynchronous sequential machine is examined. The considered machine is governed by input/output control, where access to the state of the machine is not available. In particular, disturbance inputs can infiltrate into the asynchronous machine and provoke unauthorized state transitions. The control objective is to use output feedback to compensate the machine so that the closed-loop system drive the faulty asynchronous machine from a failed state to the original one. Necessary and sufficient condition for the existence of appropriate controllers are presented in a theoretical framework. As a case study, the closed-loop system of an asynchronous machine with the proposed control scheme is implemented in VHDL code.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.10
• /
• pp.967-973
• /
• 2009

The model matching problem of asynchronous sequential machines is to design a corrective controller such that the stable-state behavior of the closed-loop system matches that of a prescribed model. In this paper, we address model matching when the external input set consists of controllable inputs and uncontrollable ones. Like in the frame of supervisory control of Discrete-Event Systems (DES), uncontrollable inputs cannot be disabled and must be transmitted to the plant without any change. We postulate necessary and sufficient conditions for the existence of a corrective controller that solves model matching despite the influence of uncontrollable events. Whenever a controller exists, the algorithm for its design is outlined. To illustrate the physical meaning of the proposed problem, the closed-loop system of an asynchronous machine with the proposed control scheme is implemented in VHDL code.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.1
• /
• pp.138-145
• /
• 2000

This paper presents a robust fault diagnosis and fault tolerant control method for the control systems in closed-loop affected by unknown inputs or disturbances. The fault diagnostic scheme is based on the disturbance-decoupled state estimation using a 2-stage state observer for state, actuator bias and sensor bias. The estimated bias show the occurrence time, location and type of the faults directly. The estimated state is used for state feedback to achieve fault tolerant control against the faults. Simulation results show that the method has definite fault tolerant ability against actuator and sensor faults, moreover, the faults can be detected on-line, isolated and estimated simultaneously.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.12
• /
• pp.1157-1162
• /
• 2009

The aerodynamic torque and power caused by the interaction between the wind and blade of wind turbine are highly nonlinear. For this reason, the overall dynamic behaviors of wind turbine have nonlinear characteristics. The aerodynamic nonlinearity also affects properties of torque control for wind turbine. In this paper, the nonlinear aerodynamic property according to the wind speed below rated power and its effects on the torque control system are investigated. Nonlinear parameter representing change of aerodynamic torque with respect to rotor speed is obtained by linearization technique. Effects of this aerodynamic nonlinear parameter on the closed-loop torque system with PI controller for an 1.5 MW wind turbine are presented.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.2
• /
• pp.138-146
• /
• 2007

The analysis and design method for achieving robust stabilization of Decentralized Dynamic Surface Control (DDSC) is presented for a class of interconnected nonlinear systems. While a centralized design approach of DSC was developed in [1], the decentralized approach to deal with large-scale interconnected systems is proposed under the assumption that interconnected functions among subsystems are unknown but bounded. To provide a closed-loop form with provable stability properties, augmented error dynamics for N nonlinear subsystems with DDSC are derived. Then, the reachable set for errors of the closed-loop systems will be approximated numerically in the form of an ellipsoid in the framework of convex optimization. Finally, a numerical algorithm to calculate the $L_2$ gain of the augmented error dynamics is presented.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.3
• /
• pp.98-109
• /
• 2000

A new PC-based Engine Control system (ECS) is developed using an object oriented programming method. This system provides more convenient environment for engine tests, easier user interface and extended functions. A Windows-based ECS software is developed with class, and the class structure is built on encapsulation and abstraction. The closed-loop engine control scheme can be easily constructed by using dynamic link library and multitasking. This means that a user can perform desired experiments without clear knowledge of the hardware structure of the ECS. Also this system allows a user to individually control the ignition and fuel injection for each cylinder in a simple manner such as through a keyboard/mouse or in a real-time operation from a closed-loop control program.

• Journal of Power Electronics
• /
• v.12 no.5
• /
• pp.769-777
• /
• 2012

In this paper, a new development in the time optimal control theory in sliding mode control systems for multi-quadrant buck converters with a variable load is presented. In general, the closed-loop time optimal control system is applied to multi-quadrant buck converters for output regulation, so that an optimal switching surface is obtained. Moreover, an adjusted optimal sliding mode controller is suggested which adjusts the controller parameters to give an optimal switching surface. In addition, a description of the transient response of the closed-loop system is proposed and used to damp any output or input disturbances in minimum time. Numerical simulations and experimental results are employed to demonstrate that the output regulation time and transient performances of dc/dc converters using the proposed technique are improved effectively when compared to the classical sliding mode control method.