• 대한전자공학회논문지
• /
• 제27권10호
• /
• pp.89-95
• /
• 1990

동작 속도와 용량성 부하에 따른 최적소자크기를 결정할 수 있는 bipolar-CMOS 버퍼 모델을 제안한다. 면적 최적화를 위한 해석적 결과를 바이폴라의 고주입 효과 및 MOS의 챠넬 속도제한영역을 가정하여 구했다. BICMOS 버퍼의 면적은 용량성 부하에 거의 비례하는 에미터 길이와 챠넬 폭을 정함으로써 최적화된다는 것을 보이고, 회로 세뮬레이션 결과와 비교하여 확인하였다.

• 전자통신동향분석
• /
• 제27권4호
• /
• pp.114-122
• /
• 2012

최근 CCTV(Closed Circuit Television)의 설치가 증가하면서 효율적인 모니터링을 위하여 지능형 영상분석 기술에 대한 관심이 높아지고 있다. 지능형 영상분석 기술은 영상의 정보를 분석하여 자동으로 이상 행위를 탐지하고 관리자에게 경보를 전송하는 기술로써, 사고를 사전에 예방하고 사고가 발생한 경우에는 신속하게 대응하여 피해를 줄일 수 있게 해준다. 본고에서는 지능형 영상분석 기술이 탐지할 수 있는 이상 행위, 즉 이벤트를 그 목적에 따라서 보안, 비즈니스 인텔리전스, 객체인식으로 구분하여 현재 기술 수준을 살펴볼 것이다. 그리고 앞으로 지능형 영상분석에서 이벤트 탐지 기술의 발전 방향을 사람의 행동인식, 행위 기반 이상 현상 탐지, 군중 환경에서 이벤트 탐지, 지능형 영상분석 구조의 변화 등의 관점으로 구분하여 살펴보고자 한다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2017년도 추계학술대회
• /
• pp.139-141
• /
• 2017

화재는 다른 재난보다 확산 속도가 빠르기 때문에 신속하고 정확한 감지와 지속적인 감시가 요구된다. 최근, 신속하고 정확한 화재 감지를 위해, CCTV(Closed-Circuit TeleVision)으로 획득한 이미지를 기계학습(Machine Learning)을 이용해 화재 발생 여부를 감지하는 화재 감지 시스템이 주목받고 있다. 본 논문에서는 기계학습의 기술 중 정확도가 가장 높은 딥러닝(Deep Learning)기반의 CCTV 화재 감지 시스템을 제안한다. 본 논문의 시스템은 딥러닝 기술 적용뿐만이 아니라, CCTV 이미지 전처리 과정을 보완함으로써 딥러닝에서의 미지 데이터(unseen data)의 낮은 분류 정확도 문제인 과적합(overfitting)문제를 해결하였다. 본 논문의 시스템은 약 80,000 개의 CCTV 이미지 데이터를 학습하여, 90% 이상의 화재 이미지 분류 정확도의 성능을 보여주었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권2호
• /
• pp.88-93
• /
• 2007

In this paper, a simple and improved noise parameter model of RF MOSFETs is developed and verified. Based on the analytical model of channel thermal noise, closed form expressions for four noise parameters are developed from proposed equivalent small signal circuit. The modeling results show a excellent agreement with the measured data of $0.13{\mu}m$ CMOS devices.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.358-363
• /
• 1987

It is widely noted that pressure feedback systems have been devised to damp the fluid resonance effectively in precision speed control-for large inertia system. A compensation technique preserving the natural output disturbance discrimination characteristics at lower frequencies is proposed The load pressure across positive displacement acceleration. The technique involves feeding back load differential pressure, sensed by pressure transducers, though a simple analog compensatory circuit (high pass filter). The effectiveness of the damping is determined by the filter time donstant and loop gain. Nonlinear total hydraulic simulation results verify the possibility of linear model predictions of extending the closed loop bandwidth beyond the uncompensated frequency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.665-666
• /
• 2008

Inserted HTS (high temperature superconducting) coil is promisingly expected as a solution for achievement of higher fields such as GHz scale NMR magnet. However, HTS magnet causes persistent current decay in the persistent current mode and this decay should be compensated in order to keep stable magnetic field. As a solution for the decay in the HTS magnets, we proposed a new type superconducting power supply, i.e., linear type magnetic flux pump (LTMFP). The LTMFP mainly consists of DC bias coil, 3-phase AC coil and superconducting Nb foil. The compensating current in closed superconductive circuit can be easily controlled by the intensity of 3-phase AC current and its frequency. In this study, it has been investigated that the flux pump can effectively charge the current for various frequencies according to the different load magnets.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.864-865
• /
• 2008

This paper deals with d-q axis inductance measurements of IPMSM considering core loss at low speed. d-q axis inductance measurements generally are conducted at rated speed and parallel core loss model can be used to exclude core loss effects on inductances. Core loss is generally modeled parallel to input terminal of d-q axis equivalent circuit. Therefore, the effect of core loss on inductance calculation can be varied by core loss modeling. In this paper, d-q axis inductance is calculated parallel and series core loss modeling. Calculated inductances are compared to FEA results and it is concluded that series core loss modeling is more closed to FEA results at low speed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.102-109
• /
• 2000

In this industrial induction motor speed and torque controlled drive system, the closed loop control usually requires the measurement of speed or position of amotor. However a sensorless drive of an induction motor has several advantages ; low cost and mechanical simplicity. Thus this paper investigates a field oriented control method without speed and flux sensors. The proposed control strategy is based on the Model Reference Adaptive System(MRAS) using a new flux estimator which replaces integrators with two lag circuits as the reference model. This algorithm may overcome several shortages of conventional MRAS such as integrator problems, small EMF at low speed. The simulation and experimental results indicate good speed responses.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.762-767
• /
• 2008

Estimated values for maximum lift coefficients of a light airplane, ChanGong-91, derived from an analytical method using a test database, a computational fluid dynamic method, a wind tunnel test, and a flight test are compared. The DATCOM method and VSAERO code are applied as the analytical method and the computational fluid dynamic method, respectively, in order to estimate the maximum lift coefficients of a light airplane. The wind tunnel test is conducted using a 1/14.5 scaled model installed in a closed circuit type wind tunnel. For the flight test approach, the wings-level power-off stall tests are performed to obtain the maximum lift coefficients. As a point of reference for the flight test results of the maximum lift coefficients, the differences of both estimates derived from the DATCOM method and the wind tunnel test data are smaller than those derived from VSAERO.

• Journal of Yeungnam Medical Science
• /
• 제28권1호
• /
• pp.94-98
• /
• 2011

One of the most popular types of vaporizer mounting sytems is Selectatec, as it possesses a simple detachment mechanism. Detachable units can loosen between the vaporizer and anesthetic machine, which can cause vapor leakage. A locking system was subsequently developed to prevent this issue; however, we report a case of an unexpected vapor leakage from a locked vaporizer.