• Bulletin of the Korean Mathematical Society
• /
• v.56 no.2
• /
• pp.351-364
• /
• 2019

We derive full closed-form expressions for the prices of European symmetric power quanto call options with four different forms of terminal payoffs under the assumption of the classical lognormal asset price and exchange rate model.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.4
• /
• pp.178-181
• /
• 2010

An automotive IC voltage regulator which consists of one-chip based on a metal-oxide semiconductor field effect transistor (MOSFET) is investigated experimentally with three types of packaging. The closed type is filled with thermal silicone gel and covered with a plastic lid on the MOSFET. The half-closed type is covered with a plastic case but without thermal silicone gel on the MOSFET. Opened type is no lid without thermal silicone gel. In order to simulate the high temperature condition in engine bay, the operating circuit of the MOSFET is constructed and the surrounding temperature is maintained at $100^{\circ}C$. In the overshoot the maximum was mainly found at the half-closed packaging and the magnitude is dependent on the packaging type and the surrounding temperature. Also the impressed current decreased exponentially during the MOSFET operation.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.97-104
• /
• 2003

This paper proposes a new parallel manipulator fur plane motion, and then discusses on the workspace and kinematical characteristics of the manipulator. The conventional planar parallel manipulators have some disadvantages which are complex non-closed type direct kinematics, workspaces containing useless voids, and concave type border tines of workspaces. The proposed planar parallel manipulator overcomes the above disadvantages, that is, the manipulator has simple closed type direct kinematics, a void-free workspace, and a convex type borderline of a workspace. This paper shows the simulation result of the workspace as well as performances indices using a homogeneous inverse Jacobian.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.6
• /
• pp.255-258
• /
• 2006

We investigated the operating characteristics of the hybrid-type superconducting fault current limiter (SFCL) according to the inductance of secondary windings. The hybrid type SFCL consists of a transformer that has a primary winding and a secondary winding with serially connected $YBa_2Cu_3O_7$ (YBCO) films. The resistive-type SFCL has difficulty when it comes to raising the capacity of the SFCL due to slight differences of critical current densities between units and structure of the SFCL. The hybrid-type SFCL with closed-loop is able to achieve capacity increase through the electrical isolation and reduction of the inductance of the secondary winding with a superconducting element of the same critical current. On the other hand, the current limiting characteristics were nearly identical in the hybrid-type SFCL with open-loop compared to closed-loop, but quench time was longer than the hybrid-type SFCL with closed-loop. We confirmed that the capacity of the SFCL was increased effectively by the reduced inductance of the secondary winding. In addition, the power burden of the system also could be lowered by reducing the inductance of secondary winding.

• Journal of ILASS-Korea
• /
• v.28 no.2
• /
• pp.75-88
• /
• 2023

In this paper, the atomization characteristics of bi-swirl coaxial injectors for a 420 N-class bipropellant thruster were investigated. Three types of injectors, namely closed-type, open-type, and screw-type, were manufactured and designed to have the same spray angle and injection pressure drop. Water was used as a simulant, and cold-flow tests were conducted under ambient temperature and pressure conditions. Since the inner and outer injectors were designed to be the same type, only the inner fuel injectors that were easy to measure were used. Using a phase doppler particle analyzer, the velocity and diameter of atomized droplets were measured. Closed-type swirl injector exhibited droplet distributions with relatively high velocities and small SMD compared to the other two injectors. Open-type swirl injector formed droplets with reverse velocities in the center region and had a large recirculation zone. Screw-type swirl injector showed a sharp decrease in droplet velocity and size with radial distance from the liquid film breakup point. For the same design requirements, the closed-type swirl injector has superior atomization performance.

• Journal of architectural history
• /
• v.14 no.3 s.43
• /
• pp.53-76
• /
• 2005

Through a field study of the folk houses, 'Closed ㄱㄴ Type' in Goyang-si, Gyonggj-do, focused on the dweller's life by the method of ethnographic interview, observation, and physical survey. L and opposite L type of inner and outer buildings form a closed inner court, and innermost backyard for woman is enclosed by fence. Form and space of the house contains dweller's traditional life. Outer space of a front gate becomes semiprivate space, for thrashing and piling up harvest and raising vegetables and pigs. Confucius principle does not fully dominate dweller's life of ancestral rite at Daecheong floor, and separation of man's and woman's quarter. Superstitious worship activities took place for lord of site and house. In everyday life, Anbang, inner main room, is assigned for parent's quarter instead of woman's quarter, and Geornbang, next room, was for son's family. Anbang has symbolic meaning for a place of deathbed. House contains agricultural activities, crop harvesting, thrashing, putting into storage, hulling rice, and keeping grain near kitchen. At present, rooms are needed more; sheds are made into rooms, rooms are enlarged toward outside, half outside space like Daechong floor becomes interior space by sash screen. And modern facilities of kitchen and bathroom are equipped for convenience. At the end, meaning and generative principle of those forms are discovered.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.49-53
• /
• 2004

LabVIEW is mostly preferred to use in experiment, measurement and control as one of the useful thing in America and Europe. So, We tried performance experiment of a single-stage closed-type centrifugal pump by using the LabVIEW. The pump rpm and the shaft torque are measured by rpm sensor and torque sensor The test pump's maximum rpm, head, kW are 1,750, 13m, and 1.5kW, respectively The casing is made up with transparency acrylic for confirmation the flow patterns. We installed experimental equipment for air water two phase flow. This paper tries to analyze the single-phase flow characteristics through this air water two phase flow experimental apparatus. The performance results of a single-stage closed-type centrifugal pump satisfied reappearance and coincide well with head and coefficients according to the change of rpm.

• Korean Journal of Environment and Ecology
• /
• v.34 no.2
• /
• pp.121-129
• /
• 2020

This study investigated the change of benthic macroinvertebrates community due to erosion control dams installed in Wonju, Gangwon by comparing the data before and after a rainy season. It selected a closed-type erosion control dam (boulder stone), an open-type erosion control dam (buttress), and a control area and surveyed two upstream points and two downstream points four times between March and September 2019. The flow velocity mostly increased in the closed-type, open-type, and control areas but decreased in St. 3 after the rainy season. The number of benthic macroinvertebrates species and their populations mostly decreased after the rainy season, and the rate of decrease in the populations in the open-type and control areas were more similar than the closed-type area. Species and populations of the EPT groups mostly decreased after the rainy season. A result of the similarity analysis showed that the closed-type and open-type areas were separated by 38.4% with the control area before the rainy season, but the open-type and control areas were separated by 51.3% with the closed-type area after the rainy season. A result of the principal components analysis (PCA) based on axis 1 showed that the closed-type area had a positive value before and after the rainy season, and the open-type and control areas had a negative value before and after the rainy season. The open-type area was more correlated with the control area than the close type. The analysis of the EPT groups showed the distribution of Ephemeroptera in the closed-type area and Trichoptera in the open-type and control areas. The result of this study shows that the installation of erosion control dam can cause changes in benthic macroinvertebrates community and that the open-type area had a smaller difference community difference from the control area after the rainy season than the closed-type area.

• Journal of Korean Foot and Ankle Society
• /
• v.12 no.2
• /
• pp.168-173
• /
• 2008

Purpose: To evaluate the results of treatments by percutaneous Acutrak screw fixation for intra-articular joint depression type fracture of calcaneus. Materials and Methods: Thirteen cases with intra-articular joint depression type fracture of calcaneus, from September 2004 to March 2006, were reviewed. There were 9 males and 4 females with 52.5 years old mean age (range: $31{\sim}74$ years old). The average follow-up period was 18 months (range: $8{\sim}32$ months). Steinmann pins and Freers were used for closed reduction. After closed reduction, Acutrak screws and K-wires were inserted. The patients were evaluated with Creighton-Nebraska health foundation assessment sheet for calcaneal fracture, the extent of recovery of Bohler angle, fragment size, and state of subtalar joint. Results: Clinical results according to Creighton-Nebraska health foundation assessment sheet for calcaneal fracture were excellent in 6 cases (46%), good in 4 cases (30%), fair in 2 cases (15%), and poor in 1 case (7%). Average preoperative Bohler angle was $7.6^{\circ}$ (range: $2^{\circ}{\sim}13^{\circ}$). Average postoperative Bohler angle was $24.4^{\circ}$ (range: $4^{\circ}{\sim}33^{\circ}$). There were no soft tissue complications. There were one mild subtalar arthritis and one moderate subtalar arthritis. Conclusion: We think that closed reduction and percutaneous Acutrak screw fixation with or without K-wire is a good option for joint depression type fracture of calcaneus.

• Speech Sciences
• /
• v.4 no.2
• /
• pp.91-102
• /
• 1998

The present study attempted to modify the conventional Melodic Intonation Therapy (MIT) in three aspects: number of syllables of adjacent target utterances (ATU), melody patterns of ATU, and initial listening of melody and intoned speech with the eyes closed. The modified Melodic Intonation Therapy (MMIT) was applied to two severe Korean aphasics. The patients exhibited a severely nonfluent aphasia resulting from a left CVA(Cerebrovascular Accident). The purpose of the modification was to avoid perseveration and improve reflective listening skills. First, the treatment program avoided ATU with the same number of syllables. Second, four different patterns of melody were developed: rising type, falling type, V-type, and inverted V-type. One type of prosodic pattern was preceded and followed by another type of melody. These two variations were to decrease perseverative behaviors. Finally, the patients kept their eyes closed when the clinician played and hummed a target melody at the initial stage of the program in order to improve reflective listening skills. A single-subject alternating treatment design was used. The effects of MMIT were compared to the conventional MIT. Differing the number of syllables and the type of melodic patterns decreased perseverative behaviors and produced more correct names. The initial listening of the target melody with the patients' eyes closed seemed to increase their attentiveness and result in a more fluent production of target utterances. Probable reasons for the effectiveness of MMIT were discussed.