• Title/Summary/Keyword: Close up

Search Result 1,260, Processing Time 0.033 seconds

Current Status and Transition of the Prevalence of Intestinal Parasitic Infections in Korea (한국(韓國)에 있어서의 장내기생충감염(腸內寄生虫感染)의 현황(現況)과 추이(推移))

  • Kim, Dong-Chan
    • Journal of agricultural medicine and community health
    • /
    • v.9 no.1
    • /
    • pp.83-108
    • /
    • 1984
  • Out of a total of 58 species of helminthic and protozoan parasitic infections in Korea, so far 38 species were reported as intestinal parasites of man. Quite a few species of the intestinal parasitic infections have long been prevalent throughout the country and this has been a significant public health problem. In this paper, current status and transition of the intestinal parasitic infections in the past years were presented. Chronological reviewing of data show background and prospects of change in the prevalence of infections. In the national prevalence survey on parasitic infections conducted once every five years since 1971, stool examinations were done by both cellophane thick smear and brine flotation techniques. Every egg positive case of Ascaris lumbricoides and Clonorchis sinensis was further examined by Stoll's dilution egg counting technique. In 1981, perianal swab using adhesive cellulose tape was added for Enterobius infection. For protozoan cyst examination conducted by province and city in '81, fecal specimens were fixed in SAF solution and examined by the formalin-ether concentration technique. High prevalence of parasitic infection in ana before the 1960s can be easily understood from the data given by the Ministry of Health and Social Affairs in 1967. From a parasite control point of view, the 1960s was the preparatory period particularly for control of soil-transmitted helminthiasis. Several organizations which have contributed to parasite control were founded in this period and the prevention law of parasitic infections was passed in '66. In the '70s, overall prevalence rates of the common intestinal parasitic infections, which were highly prevalent in the past were turned into reduction phase for the first time. The '80s can be said to be an active control period of parasitic infections. Intestinal helminths According to the reports of the national prevalence survey on parasitic infections, the prevalence of helminthic infections was 84.3%(number of person examined:24,887) in '71, 63.2%(27,178) in '76, and 41.1%(35,018) in '81. By area, the prevalence rate in '81 was 35.1%(20,569) in urban areas and 49.6%(14,447) in rural areas. Intestinal nematodes Ascaris lumbricoides The prevalence of Ascaris infection has decreased significantly in recent years. Among students, the prevalence was 55.4%, in '69 and decreased to 4.7% in '83. In the national prevalence surveys, the prevalence decreased to 13.0% in '81 from 54.9% in '71. By area, the prevalence decreased to 8.5% in '81 from 46.4% in '71 in urban area and 19.4% in '81 from 59.6% in '71 in rural area. By age, the prevalence has become in recent years relatively even in all age groups, although higher prevalence used to be seen in young age groups of around 10 years old, particulary in the highly prevalent rural areas. By sex, the prevalence was higher in the female than in the male. Unfertilized egg positive rates among the ascariasis cases increased gradually up to 55.4% on the average in '81. The intensity of the infection was also significantly decreased. Trichuris trichiura Trichuris infection had also decreased to 23.4% in '81 from 65.4% in '71. By area, the decreasing tendency of the prevalence became faster in urban areas than in the rural areas. The prevalence in urban and rural areas in '71 was 69.7%, and 63.1% respectively and decreased to 19.5% and 29.0% respectively in '81. By age, the prevalence reached a peak at the 10-14 age group and showed relatively even distribution throughout all age groups. By sex, the prevalence was close in young age groups, but in the 30s or over age group, especially in rural area, the prevalence was significantly higher in the female than in the male. The prevalence has much fluctuated depending in the area. The prevalence in rural areas surveyed in the '80s shows a range between 20.9% and 73.7% by locality. It is anticipated that the prevalence of Trichuris infection will drop more rapidly, when mass treatment is conducted. Hookworms Hookworm infection by mostly Ancylostoma duodenale and a few by Necator americanus has decreased to a negligible levels in recent years. In the national prevalence surveys, the prevalence was 10.7% in '71, 2.2% in '76, and 0.5% in '81. The prevalence was higher in rural areas than in urban areas. Wide application of multi-specific anthelminthics in the ascariasis control programmes conducted in the past decade appear to have been effective against hookworm infection. Trichostrongylus orientalis As in the case with hookworm infection, the prevalence of Trichostrongylus infection has reached a negligible levels. In the national prevalence surveys, the prevalence was 7.7% in '71, 1.0% in '76 and 0.2% in '81. Enterobius vermicularis In the national prevalence survey in '81, the egg positive rate was 12.0%. Higher prevalence is expected when examined repeatedly. The prevalence rate was 10.3% in urban area and 14.6% in rural area. In recent surveys conducted in rural areas among schoolchildren, the prevalence was 32.4% in Gimhae Gun in '82 and 64.1% in Yeongyang Gun in '83. By age, the egg positive rate was higher in young age groups of around 10 and sharply decreased in age groups of around 20 and then somewhat increased again in middle age groups. By sex, the prevalence was higher in the female than in the male. Strongyloides stercoralis Strongyloides stercoralis infection has rarely been found in Korea. Three cases were reported in 1914. And 0.1-0.5% were found infected out of 2,642 persons examined at the prisoner-of-war camp on Geojedo in 1956. One case was reported in '54 and '82, respectively. Anisakis spp. No systematic survey has been conducted for anisakiasis In Korea. So far, only several cases have been found 1 case in Seoul in '71, 5 cases in Busan in '81 and 1 case in Busan in '84. Intestinal trematodes Metagonimus yokogawai In the national prevalence survey conducted in 1981, the egg positive rate was 1.24% on the average. High endemic areas are located in the southwestern part of Korea. The prevalence in Hadong Gun was 29.1% on the average in '79. In a survey conducted in 76, the prevalence was 44.0% in Gwangyang, 55.0% in Gogseung and 29.0% in Gurye. The infection is closely correlated with raw sweetfish consumption in these areas. Other intestinal trematodes A human case of Heterophyes heterophyes was reported in 1914. Several species were reported in the '80s : 17 cases of Fibricola seoulensis, 9 cases of Pygidiopsis summa, 8 cases of Heterophyes heterophyes nocens, 1case of Heterophyopsis continua, 2 cases of Stellantchasmus falcatus, 1 case of Stictodora sp., 1 case of Echinostoma hortense, and 4 cases of Echinochasmus japonicus. As the intermediate hosts, snakes and frogs play a role for F.seoulensis and fish for the rest of the species. Intestinal cestodes Taenia saginata and T. solium Egg positive rates in the national prevalence survey were 0.7% in '76 and 1.1% in '81. The prevalence in '81 was 0.6% in urban area and 1.8% in rural area. The proglottid positive rate in Jeju Do was 19.2% on the average. On Udo, Jeju Do in 1983, the egg positive rate among the inhabitants was 2.9%. Hymenolepis nana In the national prevalence survey, egg positive rates were 0.6% in '76 and 0.4% in '81. No difference was seen in the prevalence by area and sex. Hymenolepis diminuta Infected cases were reported : 3 in '64 and I in '66. Egg positive rate in '81 was 0.01% in the national prevalence survey. Diphylobothrium latum So far, about 30 cases have been reported. The cases have been reported more frequently in recent surveys. Mesocestoides sp. A case was reported from a hospitalized patient in Seoul in '67. Spirometra erinacei Two cases were reported in '84 following reidentification of the adult worms collected in '74. Intestinal protozoa Out of a total of 23 species of human protozoan infections in Korea, 13 species were reported as intestinal protozoa : Entamoeba histolytica, E coli, Endolimax nana, Iodamoeba b$\ddot{u}$tschlii, Dientamoeba fragilis, Giardia lamblia, Chilomastix mesnilii, Embadomonas sp., Enteromonas hominis, Trichomonas hominis, Isospora belli, I. Hominis(Sarcocystis hominis), and Balantidium coli. Since the first report on intestinal protozoan infections in 1925, there have been quite a few survey data on the prevalence of the infection. It was found reviewing the data chronologically that up to the early '70s the infection was prevalent around a 30-50%. After that, the protozoan cyst positive rate has shown the tendency of gradual decrease throughout the country. Protozoan cyst survey conducted in Seoul and several provinces in 1981 revealed infection rates of 8.9%(1,310) in Gangweondo, 10.7%(1,703) in Gyenggi Do, 11.7%(1,032) in Jeonra Buk Do, 9.1%(4,116) in Jeonra Nam Do, and 1.4%(5,275) in Seoul. Entamoeba histolytica In the survey conducted by province in '81, the cyst positive rate was 0.8% in Gangweon-do, 0.3% in Gyeonggi Do, 1.4% in both Jeonra Buk Do and Jeonra Nam Do, and 0.2% in Seoul. Giardia lamblia In the survey by province in '81, cyst positive rates were 2.2% in both Gyeonggi Do and Jeonra Buk Do, 1.9% in Jeonra Nam Do, 0.5% in Gangweon Do, and 0.9% in Seoul. Balantidium coli Two cases were reported. One in 1930 and the other in '74. Isospora belli and I. Hominis(Sarcocystis hominis) Isospora belli was reported : 1 case in '56 and 3 cases in '66. I. Hominis, recently identified to be synonymous with Sarcocystis hominis, was reported : 3 cases in '66. Other intestinal protozoa The protozoan parasites other than the above mentioned are generally treated as commensal, although some of them are considered to be pathogenic. The data of '81 show that about 10% of the inhabitants are still infected with protozoa.

  • PDF

Halitosis and Related Factors among Rural Residents (농촌지역 주민들의 구취실태와 유발요인)

  • Lee, Young-Ok;Hong, Jung-Pyo;Lee, Tae-Yong
    • Journal of Oral Medicine and Pain
    • /
    • v.32 no.2
    • /
    • pp.157-175
    • /
    • 2007
  • This study was conducted through an interview process in which questionnaires were administered to 293 people. The questionnaires related to the behaviors of oral hygiene care, and disease history related to halitosis, and status of halitosis, halitosis measurement, oral examination, and caries activity tests such as the snyder test, Salivary flow rate test, and Salivary buffering capacity test. Our sample was taken from 293 rural residents within the period from 4th to 21st of January 2006. This was done in order to provide basic data to prepare both policies of halitosis prevention and a device to efficiently measure halitosis status and investigate the factors related therein. The major findings of this study results are as follows: 1. As for frequency of tooth brushing, twice a day occupied the greatest portion at 46.1 % Women exceeded men in frequency of tooth brushing. Tongue brushing everyday produced a 25.6 % result among subjects and The use of auxiliary oral hygiene devices occupied 9.2 %. 2. As for degree of usual self-awareness of halitosis: 62.5 %. This result also demonstrate that the severest time of self-awareness in regards to halitosis is wake up time in the morning. The time period produced the highest portion of 72.7 % in times of self-awareness. In terms of the area in which halitosis was observed, gum resulted in 23.0 %. As for types of halitosis, fetid smell was the most frequent at 37.2 %. 3. As for the result of halitosis measurement, values of OG less than 50 ppm occupied 54.3 % and $50{\sim}100ppm$ occupied 41.6 %. As for $NH_3$ values, $20{\sim}60ppm$ showed the highest value range of 52.6 %. 4. As for OG per disease history related to halitosis, values of OG were significantly high in the ranges of $50{\sim}100ppm$ within family history groups of food impaction by dental caries, diabetes mellitus and halitosis. As for values of $NH_3$, there showed a significant difference in respiratory system disease groups. 5 Value range of OG per ordinary halitosis self-awareness degree: values ranging less than 50 ppm were recorded at 55.9 % from the group realizing not aware of smell. 57.5 % from groups only realizing sometimes, while values range of $50{\sim}100ppm$ were recorded at 52.0 % from groups always aware of smell. 63.6 % from groups always strongly aware of smell. Meanwhile as for the values ranges of $NH_3$, $20{\sim}60ppm$. they occupied high portions for all groups of exams. 6. Values of OG per oral examination: the more pulp-exposed teeth and food impaction and the higher the tongue plaque index, values of OG increased within the range of $50{\sim}100ppm$. As for values of $NH_3$, the more prosthetic teeth and the higher the tongue plaque index, this value increased significantly, and the values increased up to no less than 60 ppm for groups of mandibular partial denture. 7. Within the realm of caries activity test: as for the Snyder test, high activity was highest by 43.0 % wherewith the higher the activity of acidogenic bacteria the higher the OG values. As for the salivary flow rate test, the number of cases below 8.0 ml showed the highest tendency by 62.5 %. The larger the salivary flow rate the more decreased OG values distribution. As for the salivary buffering capacity test, $6{\sim}10$ drops of 0.1N lactic acid showed the overwhelming trend by 58.7 % whereby the higher the salivary buffering capacity the greater distribution occupancy ratio of OG values below 50 ppm which is scentless to on ordinary person. 8. As for the correlation between oral environment and halitosis, OG showed the positive correlation with pulp exposed teeth, filled teeth, present teeth, tongue plaque index, and food impaction, while the negative correlation with salivary flow rate and prosthetic teeth. $NH_3$ showed a positive correlation with prosthetic teeth and frequency of tooth brushing, while decayed teeth was negative correlation. 9. As for the multiple regression analysis result, there have been selected female, pulp exposed teeth, prosthetic teeth, food impaction, salivary flow rate, tongue plaque index and severe activities in the Snyder test as factors affecting OG wherein explanatory power on it was 45.1 %. There have been selected females, pulp exposed teeth, tongue plaque index, and prosthetic teeth as factors affecting on $NH_3$ wherein explanatory power on it was 6.6 %. With the aforementioned results in mind, the status of halitosis among rural residents is considered to bare a close relation with oral environments and other factors related to halitosis such as the Snyder test from caries activity test, and salivary flow rate test. For the prevention of halitosis of residents in rural areas, we have to focus on correct tooth brushing methods and tongue brushing, with using auxiliary oral hygiene devices to remove fur of tongue plaque and food impaction. Also, when the cause and ingredients of halitosis are diverse and complex, in order to analyze exactly the factors of individual halitosis development, we need continuous and systematic study in order to provide rural residents with programs of oral hygiene education and encourage the use of dental hygienists in public health centers.

A Study on Medium-Sized Enterprises of Japan (일본의 중견기업에 관한 연구 : 현황과 특징, 정책을 중심으로)

  • Kang, Cheol Gu;Kim, Hyun Sung;Kim, Hyun Chul
    • Korean small business review
    • /
    • v.32 no.2
    • /
    • pp.209-223
    • /
    • 2010
  • Korea's business is composed of a few large-sized enterprises (which can be abbreviated as LSE) and a majority of small-sized enterprises (SSE). Although there has been a growing recognition of the need for the development of medium-sized enterprises (MSE) which can serve as a link between SSE and LSE, as yet there has not yet been a consensus on the definition, characteristics and the function of the MSE in Korea. Nowadays, the world is being globalized, and Japan and China are in competition to ne a great economic power. While East Asia is experiencing rapid changes, promoting MSE which can secure flexibility and efficiency through covering up the limitation of LSE and SSE is needed in order to respond the global market which is being specialized. The features of MSE in Japan can be listed as follows. First, the MSE in Japan is developing the company through getting into niche markets which are hard for major companies to enter rather than developing markets in order to compete against major companies directly. While MSEs are endeavoring to build the business firmly in the domestic market, they can possess special and competitive technical skills through trials and errors; so that they can get a chance develop their business through independent business system rather than putting their effort to compete against major companies. Second, from the MSEs with competitive edge in the market, there are many contributions to the national exportation. Those MSEs produce in domestic and maintain the quality of high price products which need cutting-edge technology, while they relocate the low and middle priced goods to the country where manufacturing costs are low, so that they can maintain the price competitiveness. Third, the industrial structure in Japan is formed from dual structure between major companies and small sized companies. In other words, in Japan's industrial structure which are composed of subcontract structure, this dual structure has taken a major role of small sized companies' growth and manufacturing businesses' international competitive power. Forth, MSE in Japan adopt a strategy of putting their value on qualitative scale growth rather than quantitative scale growth. In this paper, the case of Japanese MSE is analyzed. Along with its long history of Industrialization, Japan has a corporate environment where the SSEs can develop as a MSE and later a LSE through a full-support system. Among its SSEs, there are a number of world class corporations equipped with a large domestic market, win-win cooperation with the LSEs and an independent technology development. It can also be observed that these SSEs develop into MSEs with sustainable growth potentials. This study will focus on the condition under which the MSEs of Japan have been developed, and how they have survived the competition between SSEs and LSEs. Through this study, this paper attempts to offer solutions to Korea's polarization between the SSE and LSE, while providing the basis for SSEs revitalization. In general, if both extremities phenomenon deepen between LSE and SSE, there are possible fears of occurring disutility in national economy by the monopolization of LSE. For that reason, enterprise group, which can make SSE or MSE compete LSE in some area and ease the monopoly and oligopoly problem, is needed. This awareness has been shared for ages long. Nevertheless, there is no legal definition for MSE in Japan, and there is no definition about the enterprise size or unified view of MSE between scholars, but it is defined differently by each of academical person or research institution and study meeting. For that reason, this paper will organize the definition of MSE in Japan, and then will propose the characteristics of the background which has made MSE secure competitiveness and sustainable growth in global market. This study focus on that because through this process, the positive change to the awareness of MSE can be proposed in Korea and to seek the policy direction for building institutional framework which can make SSE become MES. Through this way, the fundamentals for SSE to become MSE can be managed and some appropriate suggestions which will be able to make MSE enter the global market in the future can also be proposed. Due to these facts, this study is very important and well timed task. In a sense of this way, this study will examine the definition and role of MSE in Japan. after this examination, this study will deal with the status, special feature, and promotion policy for MSE. Through this analysis of MSE in Japan, the foundation which be able to set the desirable role model for MSE in Korea can be proposed. Also, the political implication which is needed to push ahead to contribute to creating employment and economic growth through sustainable growth of MSEs in economic system of Korea can be offered through this study. It has been found that Japan's MSE functions as an indispensable link among various industrial structures by holding a significant position in employment rate, production and value added. Although the MSEs took up less than 1% of the entire number of businesses with 2700 manufacturing firms and 7000 non-manufacturing firms, its employment ratios are about 15%, while taking about 25% of the manufacturing industry's exports. In industries such as machinery and electronics which is considered Japan's major industry, the MSEs showed a higher than average ratio of manufacturing exports and employment rate. It can be analyzed that behind Japan's advantageous industries, close and deeply knit MSEs exist. Although there are no clearly stated policies geared towards the MSEs by the Japanese government, various political measures exist such as the R&D Project and the inducement of cooperation between enterprises which gives room for MSEs to participate in the SSE policies. In relation to these findings, the following practical measures can be considered in order to revitalize Korea's MSEs: First, there is a need for a legal definition of MSE and the incentives to provide legal support for its growth. Second, if a law to support the MSEs is established, it could provide a powerful inducement for the SSE to grow as a MSE, rather than stay as a SSE. Third, there is a need for a strategy of MSEs to establish a stable base in the domestic market and then advance to the global market with the accumulated trial and error and competitiveness. Fourth, the SSE themselves need the spirit of entrepreneurship in order to make the leap to a MSE. Because if nothing is to be changed about the system on the firms that grew, and the parts of the past custom was left to be managed alone, confusion and absence of management can take place. No matter how much tax favors the government will give and no matter how much incentive there could be through the policies, there are limits for industries to higher the ability to propagate. And because of that it is a period where industries need their own innovative skills to reform their firms.

A Study on pluralistic Reformation for Education of Telecommunication -for Establishment of Individual System for Comm. Education- (통신교육의 계열화와 계층화 -고유한 교역의 형성을 위하여-)

  • 조정현
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.3 no.1
    • /
    • pp.28-30
    • /
    • 1978
  • Communication actions as a social band or Human community stick (fast) to human being ceaselessly w without stopping everywhere. All of comm. actions can be kept up and developed by the education of its own. Comm. actions have to include a character of social process, and so for it the social science should t to be some essential part of it. Therefore, Comm. education have to be schemed for achieving with a point of view of synthetical s science including technical and social factor. However, recentry Comm. education be suffered to lose of itowns essential attribute and individual i independence becausing to reduce social weight recklessly in their education It is a prindiple that Comm. science is an integrate science being composed of human, social and t technical subdepartments and so comm. education have to obey for Comm. constuctional theory, i international and social claim. Originally in Korea a educational idea and genealogy forming by the comm. scientific theory has I inherited on orthodoxy. But in 1961, communication college that is only the orthodox model of Comm. education, was f forced to close by some reckless policy and then the national administration for the Comm. education h have been weakened, and so recently it’s education became to degenerate as out of genealogy or n nonsystem alike some scattering Family. On the other side, today comm. science make to it’s modern scientific factor and to keep its l integrate level, therefore, all of educational provisions and administration for the telecomm. should t to be supplement to be fit for their plural chatacters. Comm. education have to occupy an individual educational system through the comm. theory, and t then it can be coexisted with neighbour scientific field equally and can include, connect coordinate o or effect its inference in each subfactor organically. Finally, educational system for telecommunication should to be requested as preeedence that i independent field including pluralism must be formed and sufficient autonomy be guarenteed, and s so Comm. education must be to restored its orthodox genealogy and be recovered individual system a and seIfrestraint field, and then it can be accomplished its own duty for nation and society.

  • PDF

Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines (정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구)

  • No, Sang-Ha
    • Journal of Biosystems Engineering
    • /
    • v.1 no.1
    • /
    • pp.15-15
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines (정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구)

  • 노상하;최재갑
    • Journal of Biosystems Engineering
    • /
    • v.1 no.1
    • /
    • pp.17-48
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

  • PDF

Policy Direction for The Farmland Sizing Suitable to Regional Trait (지역특성을 반영한 영농규모화사업의 발전방향-충남지역을 중심으로-)

  • Shim, Jae-Sung
    • The Journal of Natural Sciences
    • /
    • v.14 no.1
    • /
    • pp.83-121
    • /
    • 2004
  • This study was carried out to examine how solid the production foundation of rice in Chung-Nam Province is, and, if not, to probe alternative measures through the size of farms specializing in rice, of which direction would be a pivot of rice industry-oriented policy. The results obtained can be summarized as follows : 1. The amount of rice production in Chung-Nam Province is highest in Korea and the size of paddy field area is the second largest : This implying that the probability that rice production in Chung-Nam Province would be severely influenced by a global trend of market conditions. The number of farms specializing in rice becoming the core group of rice farming account for 7.7 percent of the total number of farm household in Korea. Average field area financial support which had been input to farm household by Government had a noticeable effect on the improvement of the policy of farm-size program. 2. Farm-size program in Chung-Nam Province established from 1980 to 2002 in creased the cultivation size of paddy field to 19,484 hectares, and this program enhanced the buying and selling of farmland and the number of farmland bargain reached 6,431 household and 16,517 hectares, respectively, in 1995-2002. Meanwhile, long-term letting and hiring of farmland appeared so active that the bargain acreage reached 6,970 hectares, and farm involved was 7,059 households, however, the farm-exchange-and-unity program did not satisfy our expectation, because the retirement farm operators reluctantly participated to sell their farms. Another reason that had delayed the bargain of farms rested on the general category of social complication attendant upon the exchange and unity operation for scattered farm. Such difficulties would work negative effects out to carry on the target of farm-size work in general. 3. The following measures were presented to propel the farm-size promotion program : a. Occupation shift project, followed by the social security program for retirement and elderly farm operators, should be promptly established and also a number of types of incentives for promoting the letting and hiring work and farm-exchange-and-unity program would also be set up. b. To establish the effective key system of rice production, all the farm operators should increase the unit area yield of rice and lower the production cost. To do so, a great deal of production teams of rice equipped with managerial techniques and capabilities need to be organized. And, also, there should be appropriate arrays of facilities including information system. This plan is desirable to be in line with a diversity of the structural implement of regional integration based on farm system building. c. To extend the size of farm and to improve farm management, we have to devise the enlargement of individual size of farm for maximized management and the utilization of farm-size grouping method. In conclusion, it can be said that the farm-size project in Chung-Nam Province which has continued since the 1980s was satisfactorily achieved. However, we still have a lot of problems to be solved to break down the barrier for attainment of the desirable farm-size operation work.. Farm-size project has fairly close relation with farm specialization in rice and, thus, the positive support for farm household including the integrated program for both retirement farmers and off-farm operators should be considered to pursue the progressive development of the farm-size program, which is key means to successful achievement of rice farming enforcement in Chung-Nam Province.

  • PDF

Structure of Export Competition between Asian NIEs and Japan in the U.S. Import Market and Exchange Rate Effects (한국(韓國)의 아시아신흥공업국(新興工業國) 및 일본(日本)과의 대미수출경쟁(對美輸出競爭) : 환율효과(換率效果)를 중심(中心)으로)

  • Jwa, Sung-hee
    • KDI Journal of Economic Policy
    • /
    • v.12 no.2
    • /
    • pp.3-49
    • /
    • 1990
  • This paper analyzes U.S. demand for imports from Asian NIEs and Japan, utilizing the Almost Ideal Demand System (AIDS) developed by Deaton and Muellbauer, with an emphasis on the effect of changes in the exchange rate. The empirical model assumes a two-stage budgeting process in which the first stage represents the allocation of total U.S. demand among three groups: the Asian NIEs and Japan, six Western developed countries, and the U.S. domestic non-tradables and import competing sector. The second stage represents the allocation of total U.S. imports from the Asian NIEs and Japan among them, by country. According to the AIDS model, the share equation for the Asia NIEs and Japan in U.S. nominal GNP is estimated as a single equation for the first stage. The share equations for those five countries in total U.S. imports are estimated as a system with the general demand restrictions of homogeneity, symmetry and adding-up, together with polynomially distributed lag restrictions. The negativity condition is also satisfied for all cases. The overall results of these complicated estimations, using quarterly data from the first quarter of 1972 to the fourth quarter of 1989, are quite promising in terms of the significance of individual estimators and other statistics. The conclusions drawn from the estimation results and the derived demand elasticities can be summarized as follows: First, the exports of each Asian NIE to the U.S. are competitive with (substitutes for) Japan's exports, while complementary to the exports of fellow NIEs, with the exception of the competitive relation between Hong Kong and Singapore. Second, the exports of each Asian NIE and of Japan to the U.S. are competitive with those of Western developed countries' to the U.S, while they are complementary to the U.S.' non-tradables and import-competing sector. Third, as far as both the first and second stages of budgeting are coneidered, the imports from each Asian NIE and Japan are luxuries in total U.S. consumption. However, when only the second budgeting stage is considered, the imports from Japan and Singapore are luxuries in U.S. imports from the NIEs and Japan, while those of Korea, Taiwan and Hong Kong are necessities. Fourth, the above results may be evidenced more concretely in their implied exchange rate effects. It appears that, in general, a change in the yen-dollar exchange rate will have at least as great an impact, on an NIE's share and volume of exports to the U.S. though in the opposite direction, as a change in the exchange rate of the NIE's own currency $vis-{\grave{a}}-vis$ the dollar. Asian NIEs, therefore, should counteract yen-dollar movements in order to stabilize their exports to the U.S.. More specifically, Korea should depreciate the value of the won relative to the dollar by approximately the same proportion as the depreciation rate of the yen $vis-{\grave{a}}-vis$ the dollar, in order to maintain the volume of Korean exports to the U.S.. In the worst case scenario, Korea should devalue the won by three times the maguitude of the yen's depreciation rate, in order to keep market share in the aforementioned five countries' total exports to the U.S.. Finally, this study provides additional information which may support empirical findings on the competitive relations among the Asian NIEs and Japan. The correlation matrices among the strutures of those five countries' exports to the U.S.. during the 1970s and 1980s were estimated, with the export structure constructed as the shares of each of the 29 industrial sectors' exports as defined by the 3 digit KSIC in total exports to the U.S. from each individual country. In general, the correlation between each of the four Asian NIEs and Japan, and that between Hong Kong and Singapore, are all far below .5, while the ones among the Asian NIEs themselves (except for the one between Hong Kong and Singapore) all greatly exceed .5. If there exists a tendency on the part of the U.S. to import goods in each specific sector from different countries in a relatively constant proportion, the export structures of those countries will probably exhibit a high correlation. To take this hypothesis to the extreme, if the U.S. maintained an absolutely fixed ratio between its imports from any two countries for each of the 29 sectors, the correlation between the export structures of these two countries would be perfect. Therefore, since any two goods purchased in a fixed proportion could be classified as close complements, a high correlation between export structures will imply a complementary relationship between them. Conversely, low correlation would imply a competitive relationship. According to this interpretation, the pattern formed by the correlation coefficients among the five countries' export structures to the U.S. are consistent with the empirical findings of the regression analysis.

  • PDF

Literature Analysis of Radiotherapy in Uterine Cervix Cancer for the Processing of the Patterns of Care Study in Korea (한국에서 자궁경부알 방사선치료의 Patterns of Care Study 진행을 위한 문헌 비교 연구)

  • Choi Doo Ho;Kim Eun Seog;Kim Yong Ho;Kim Jin Hee;Yang Dae Sik;Kang Seung Hee;Wu Hong Gyun;Kim Il Han
    • Radiation Oncology Journal
    • /
    • v.23 no.2
    • /
    • pp.61-70
    • /
    • 2005
  • Purpose: Uterine cervix cancer is one of the most prevalent women cancer in Korea. We analysed published papers in Korea with comparing Patterns of Care Study (PCS) articles of United States and Japan for the purpose of developing and processing Korean PCS. Materials and Methods: We searched PCS related foreign-produced papers in the PCS homepage (212 articles and abstracts) and from the Pub Med to find Structure and Process of the PCS. To compare their study with Korean papers, we used the internet site 'Korean Pub Med' to search 99 articles regarding uterine cervix cancer and radiation therapy. We analysed Korean paper by comparing them with selected PCS papers regarding Structure, Process and Outcome and compared their items between the period of before 1980's and 1990's. Results: Evaluable papers were 28 from United States, 10 from the Japan and 73 from the Korea which treated cervix PCS items. PCS papers for United States and Japan commonly stratified into $3\~4$ categories on the bases of the scales characteristics of the facilities, numbers of the patients, doctors, Researchers restricted eligible patients strictly. For the process of the study, they analysed factors regarding pretreatment staging in chronological order, treatment related factors, factors in addition to FIGO staging and treatment machine. Papers in United States dealt with racial characteristics, socioeconomic characteristics of the patients, tumor size (6), and bilaterality of parametrial or pelvic side wail invasion (5), whereas papers from Japan treated of the tumor markers. The common trend in the process of staging work-up was decreased use of lymphangiogram, barium enema and increased use of CT and MRI over the times. The recent subject from the Korean papers dealt with concurrent chemoradiotherapy (9 papers), treatment duration (4), tumor markers (B) and unconventional fractionation. Conclusion: By comparing papers among 3 nations, we collected items for Korean uterine cervix cancer PCS. By consensus meeting and close communication, survey items for cervix cancer PCS were developed to measure structure, process and outcome of the radiation treatment of the cervix cancer. Subsequent future research will focus on the use of brachytherapy and its impact on outcome including complications. These finding and future PCS studies will direct the development of educational programs aimed at correcting identified deficits in care.

Studies on the Fatty Acid Composition of Lipids from Some Seeds of the Cucurbitaceae Family (박과식물(科植物) 종자유(種子油)의 지방산(脂肪酸) 조성(組成))

  • Kim, Seong-Jin;Joh, Yong-Goe
    • Journal of the Korean Applied Science and Technology
    • /
    • v.13 no.1
    • /
    • pp.21-29
    • /
    • 1996
  • Levels of total, neutral and polar lipids from the seeds of eight species of the Cucurbitaceae f Cucurbita moschata, Lufa cylindrica, Citrullus vulgari, Cucumis melo var. makuwa, Cucumis satvus, Lag leucantha. Trichosanthes kirilowii and Momordica charantia, were determinded, and their fatty compositions were also analyzed by gas-liquid chromatography. The results were summarized as foll. Lipid contents of the seeds range from 21.9 to 50.7%, which contained 98% up of neutral lipi the fatty acid compositon of ottal lipids from the seeds of Cucurbita moschata, Lufa cylindrica, Ci vulgari, Cucumis melo var. makuwa, Cucumis sativus and Lagenaria leucantha, linoleic acid is the mos dominant component(56.8${\sim}$84.0%) followed by oleic acid(5.7${\sim}$22.2%) and palmitic acid(6.1${\sim}$1) with a trace amount of ${\alpha}-linolenic$ acid(below 0.6%). On the contrary, the seed oils of Tricho kirilowii and Momordica charantia are characterized by presence of considerable amounts of con trienoic acid such as punicic acid($_{9c.11t.13c-}C_{18:3}$) and ${\alpha}-eleostearic$ acid($_{9c.11t.13c-}C_{18:3}$). For example total lipids of T. kirilowii seeds were mainly composed of linoleic acid(40.5%) and punicic acid(3) in the fatty acid composition, while those of M. charantia seeds predominantly comprised ${\alpha}-eleos$ acid as a main component(66.9%), accompanied by oleic acid(11.7%) and linoleic acid(10.4%). oil ${\beta}-eleostearic$ acid($_{9t.11t.13c-}C_{18:3}$) was checked as a trace. Fatty acid profiles of neutral lipids close resemblance to those of total lipids in all the seed oils, but are different from those of polar In particular, conjugate trienoic acids including punicic acid and ${\alpha}-eleostearic$ acid which are oc as the most abundant component in both neutral lipids of T. kirilowii and M. charantia seed oils, ar ent in a extremely small amount in both polar lipids. The fatty acid distribution in the polar lipid the samples except for T. kirilowii and M. charantia seed oils, showed a tendency of consid increased level of saturated fatty acids(25.0${\sim}$29.4%) compared with that in the neutral lipids(9.9%). The results obtained in this experiment suggest us that the seed oils of the Cucurbitaceae