• Title/Summary/Keyword: Clips

검색결과 370건 처리시간 0.029초

Estimation of Genetic Parameters for Wool Traits in Angora Rabbit

  • Niranjan, S.K.;Sharma, S.R.;Gowane, G.R.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제24권10호
    • /
    • pp.1335-1340
    • /
    • 2011
  • Different genetic parameters for weaning weight and wool traits were estimated using restricted maximum likelihood (REML) in Angora rabbits. Total wool yield of first (I), second (II) and third (III) clips were taken as a separate trait under study. The records from more than 2,700 animals were analysed through fitting six animal models with various combinations of direct and maternal effects. A log likelihood ratio test was used to select the most appropriate model for each trait. Direct heritability estimates for the wool traits were found to be moderate to high across different models. Heritability estimates obtained from the best model were 0.24, 0.22, 0.20 and 0.21 for weaning weight, clip I, II and III; respectively. Maternal effects especially due to permanent environment had higher importance at clip I and found to be declining in subsequent clips. The estimates of repeatability of doe effect on wool traits were 0.44, 0.26 and 0.18 for clip I, II and III; respectively. Weaning weight had moderately high genetic correlations with clip I (0.57) and II (0.45), but very low (0.11) with clip III. Results indicated that genetic improvement for wool yield in Angora rabbit is possible through direct selection. Further, weaning weight could be considered as desirable trait for earliest indirect selection for wool yield in view of its high genetic correlation with wool traits.

O-ring abutment를 이용한 Implant over denture의 제작 (Implant supported over denture with O-ring abutment)

  • 이성욱;이정환;박효련
    • 대한치과기공학회지
    • /
    • 제26권1호
    • /
    • pp.209-216
    • /
    • 2004
  • The purpose of this study is to introduce how to make implant supported over denture with Oring. Many kinds of attachments have used to dental restorations. The application of attachment has widely increased implant fixed prosthesis and implant supported over denture. In order that implant supported over denture have properly retention, generally used O-ring, magnetic, bar attachment. O-ring give us an advantage that is required more minimum vertical dimension than bar-type and easily replace with new part. When we make these prosthesis using O-ring, Bar, Ball attachment, we should following procedures. Strong occlusion force leads to fracture of over denture because part of functional mechanism as implant abutment or attachment is spaced. Clips are regularly activated. O-ring and springs are changed every year. The pattern of resorption should be carefully monitored and compensated for by relining procedures. If the over denture appears to rest on the bar or the ball attachments, relining should be performed and clips/caps should be changed.

  • PDF

광역상수도 시설의 비상시 의사결정을 위한 전문가시스템 (Expert System for Emergency Decision Making for Metro Water Supply Systems)

  • 김응석;김중훈;백천우;이정호
    • 한국물환경학회지
    • /
    • 제23권1호
    • /
    • pp.103-110
    • /
    • 2007
  • An efficient operational strategy using expert system for metro water supply systems in case of emergency situations is developed in this study. The emergency situations of the water supply systems are classified into three categories : pipeline system accident, machinery and electric facility accident and water quality accident. A PC-based expert system is developed using CLIPS for Seoul metro water supply system, Phase 1 & 2 system and Phase 3 & 4 system. Broad professional knowledges and experiences from the experts in the water supply systems have been collected systematically to construct the knowledge base. Decision-making in case of an emergency is based upon the professional knowledge so that a rational and efficient operational management can be available even in the absence of experienced expert. Especially the expert model developed in this study also provides a guide for pumping operation in case of pipeline accident to confirm that the proper pressure to all nodes in the system is supplied. The pipe network simulator KYPIPE has been consecutively executed by trial and error fashion for each pipeline in the system. The results from KYPIPE were included in the knowledge base to supplement the knowledge of the field engineers.

도시유출 및 수질관리를 위한 지리정보체계 및 전문가시스템의 적용 (Applications of Geographic Information System and Expert System for Urban Runoff and Quality Management)

  • 이범희
    • 한국수자원학회논문집
    • /
    • 제34권3호
    • /
    • pp.253-263
    • /
    • 2001
  • 도시유역의 수자원 개발 및 재해예방을 위해서는 정확한 입력정보의 생성방안을 개발하였고, 급속한 도시화의 영향에 따른 수자원 및 환경문제를 보다 효율적으로 해결하기 위하여 전문가시스템의 개발 및 적용방안을 제안하였다. ARC/INFO를 사용한 지리정보체계의 적용과 인공위성 관측자료를 사용함으로써 넓은 공간에서 시간적 변화가 큰 안양천 유역의 자료들을 합리적으로 획득하였으며, CLIPS 6.0을 적용하여 전문가시스템 ESPE를 개발하였다. 재현결과가 측정자료들과 전반적으로 일치하였고, 이러한 방법들은 급속히 변화하는 도시유역의 유출 및 수질 모의에 효율적으로 활용될 수 있을 것으로 기대된다.

  • PDF

Robust Online Object Tracking with a Structured Sparse Representation Model

  • Bo, Chunjuan;Wang, Dong
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제10권5호
    • /
    • pp.2346-2362
    • /
    • 2016
  • As one of the most important issues in computer vision and image processing, online object tracking plays a key role in numerous areas of research and in many real applications. In this study, we present a novel tracking method based on the proposed structured sparse representation model, in which the tracked object is assumed to be sparsely represented by a set of object and background templates. The contributions of this work are threefold. First, the structure information of all the candidate samples is utilized by a joint sparse representation model, where the representation coefficients of these candidates are promoted to share the same sparse patterns. This representation model can be effectively solved by the simultaneous orthogonal matching pursuit method. In addition, we develop a tracking algorithm based on the proposed representation model, a discriminative candidate selection scheme, and a simple model updating method. Finally, we conduct numerous experiments on several challenging video clips to evaluate the proposed tracker in comparison with various state-of-the-art tracking algorithms. Both qualitative and quantitative evaluations on a number of challenging video clips show that our tracker achieves better performance than the other state-of-the-art methods.

전문가시스템과 신경회로망에 의한 축사환경개선시스템 (Troubleshooting System for Environmental Problems in a Livestock Building Using an Expert System and a Neural Network)

  • 손정익;;김문기
    • 한국농공학회지
    • /
    • 제36권1호
    • /
    • pp.95-102
    • /
    • 1994
  • Since parameters influencing the indoor environment of livestock building interrelate so complicatedly, it is of great difficulty to identify the exact cause of environmental problems in a livestock building. Therefore, the approaches for the problem solving based on experience not numerical calculation will be helpful to the management of livestock building This study was attempt to develop the decision supporting system to diagnose environmen- tal problems in a livestock building based on an expert system and a neural network. HClips$^3$), attaching the Hangeul user interface to Clips which is known as a powerful shell for develop- ing expert system, was used. The multilayer perceptron consisting of 4 layers including back propagation learning algorithm was adpoted, which was rapidly converged within the allowable range at 50,000 learning sweeps. The expert system and neural network seemed to work well for this specific application, providing proper suggestions for some environmental problems: particularly, the neural net- work trained by an environmental problem and its corresponding answer with certainty factor, produced the same results as those by expert system.

  • PDF

SURF 알고리즘을 이용한 증강현실 동영상 서비스 시스템의 설계 및 구현 (Design and Implementation of Video Clip Service System in Augmented Reality Using the SURF Algorithm)

  • 전영준;신홍섭;김진일
    • 융합신호처리학회논문지
    • /
    • 제16권1호
    • /
    • pp.22-28
    • /
    • 2015
  • 본 논문은 신문, 잡지, 앨범 등에서 추출한 정적인 영상으로부터 이와 연계된 동영상을 증강현실로 보여주는 서비스를 제공하는 시스템을 설계하고 구현하였다. 먼저, 매체에 인쇄되어 있는 원본 영상에 대하여 SURF 알고리즘을 이용하여 특징점을 추출하여 관련 동영상과 함께 저장한다. 다음으로 스마트폰 등의 모바일 기기의 카메라를 이용하여 이미지를 촬영하면, 이의 특징점을 실시간으로 추출하여 이와 매칭되는 원본 영상을 검색하여 연결된 동영상을 불러와서 스마트폰을 통해 증강현실로 보여준다. 제안 시스템은 안드로이드 스마트폰에 적용시켜 보았으며 테스트 결과, 인쇄매체의 이미지 일부가 오염 또는 훼손되어도 인식에 문제가 없이 잘 동작함을 확인하였다.

The Effects of Social Media on Music-induced Tourism: A Case of Korean Pop Music and Inbound Tourism to Korea

  • Oh, Sehwan;Ahn, JoongHo;Baek, Hyunmi
    • Asia pacific journal of information systems
    • /
    • 제25권1호
    • /
    • pp.119-141
    • /
    • 2015
  • With the rapid spread of social media, video-sharing social media like YouTube has emerged as a consumption and distribution channel for entertainment goods such as music videos and movie trailers. In tourism research, there has been a lot of research of how the visual media such as movies and soap operas induced tourism. However, no studies have attempted to examine the role of social media as a music consumption channel and its impact on tourism. Expanding a body of media-induced tourism, we analysed the impact of video-sharing social media on music-induced tourism with a case of Korean pop music and inbound tourism to Korea. Developing a Web-crawler, we collected YouTube users' comments data on 166 Korean pop music video clips which were released from 2009 to 2012 with over 1 million view counts. Controlling many of the determinants of tourism and analysing country-by-country impact of YouTube comments with the panel data, we found that engagement of Korean pop music video clips on YouTube is a significant predictor for the flow of inbound tourists to Korea.

A Comprasion of the Activation of Mirror Neurons Induced by Action Observation between Simple and Complex Hand Movement

  • Lee, Mi Young;Kim, Ju Sang
    • The Journal of Korean Physical Therapy
    • /
    • 제31권3호
    • /
    • pp.157-160
    • /
    • 2019
  • Purpose: We compared the activation pattern of the mirror neurons (MN) between two types of hand movement according to action observation using functional MRI. Methods: Twelve right-handed healthy subjects (5 male and 7 female, mean age $21.92{\pm}2.02years$) participated in the experiment. During fMRI scanning, subjects underwent two different stimuli on the screen: 1) video clips showing repeated grasping and releasing of the ball via simple hand movement (SHM), and (2) video clips showing an actor performing a Purdue Pegboard test via complex hand movement (CHM). paired t-test in statistical parametric mapping (SPM) was used to compare the activation differences between the two types of hand movement. Results: CHM as compared with the SHM produced a higher blood oxygen level dependent (BOLD) signal response in the right superior frontal gyrus, left inferior and superior parietal lobules, and lingual gyrus. However, no greater BOLD signal response was found by SHM compared with CHM (FWE corrected, p<0.05). Conclusion: Our findings provided that the activation patterns for observation of SHM and CHM are different. CHM also elicited boarder or stronger activations in the brain, including inferior parietal lobule called the MN region.

하악 임플란트 overdenture에서 anchorage system이 하중전달에 미치는 영향 (EFFECT OF ANCHORAGE SYSTEMS ON LOAD TRANSFER WITH MANDIBULAR IMPLANT OVERDENTURES : A THREE-DIMENSIONAL PHOTOELASTIC STRESS ANALYSIS)

  • 김진열;전영찬;정창모
    • 대한치과보철학회지
    • /
    • 제40권5호
    • /
    • pp.507-524
    • /
    • 2002
  • Load transfer of implant overdenture varies depending on anchorage systems that are the design of the superstructure and substructure and the choice of attachment. Overload by using improper anchorage system not only will cause fracture of the framework or screw but also may cause failure of osseointegration. Choosing anchorage system in making prosthesis, therefore, can be considered to be one of the most important factors that affect long-term success of implant treatment. In this study, in order to determine the effect of anchorage systems on load transfer in mandibular implant overdenture in which 4 implants were placed in the interforaminal region, patterns of stress distribution in implant supporting bone in case of unilateral vertical loading on mandibular left first molar were compared each other according to various types of anchorage system using three-dimensional photoelastic stress analysis. The five photoelastic overdenture models utilizing Hader bar without cantilever using clips(type 1), cantilevered Hader bar using clips(type 2), cantilevered Hader bar with milled surface using clips(type 3), cantilevered milled-bar using swivel-latchs and frictional pins(type 4), and Hader bar using clip and ERA attachments(type 5), and one cantilevered fixed-detachable prosthesis(type 6) model as control were fabricated. The following conclusions were drawn within the limitations of this study, 1. In all experimental models. the highest stress was concentrated on the most distal implant supporting bone on loaded side. 2. Maximum fringe orders on ipsilateral distal implant supporting bone in a ascending order is as follows: type 5, type 1, type 4, type 2 and type 3, and type 6. 3. Regardless of anchorage systems. more or less stresses were generated on the residual ridge under distal extension base of all overdenture models. To summarize the above mentioned results, in case of the patients with unfavorable biomechanical conditions such as not sufficient number of supporting implants, short length of the implant and unfavorable antero-posterior spread. selecting resilient type attachment or minimizing distal cantilever bar is considered to be appropriate methods to prevent overloading on implants by reducing cantilever effect and gaining more support from the distal residual ridge.