• Archives of Plastic Surgery
• /
• 제34권1호
• /
• pp.18-23
• /
• 2007

Purpose: Anthropometry can be divided into two methods, direct anthropometry and indirect anthropometry. The most ideal and accurate method is a direct anthropometry. However, it is difficult to measure in the case of children because of poor cooperation, and it lacks re-productivity. Cast model has advantages of three dimensional featuring, inexpensive and easy fabrication. This study is conducted to find out an accuracy of indirect anthropometry on cast model by comparing it with direct anthropometry. Methods: Total 48 cleft lip nasal deformity patients (unilateral, 40; bilateral, 8) were included in this study. Cast models were made before surgery under general anesthesia with alginate impression material and model plaster. Eleven linear measurements among 7 landmarks were taken as direct anthropometry before surgery with Castroviejo spreading caliper. At the same time, indirect anthropometry on cast model was done at the same linear distances as well. Results: Of the total 11 linear measurements, both ala lengths, both columella lengths, nose width, projective distance between facial insertion points of the ala, projective distance between the alar base points, right nostril floor width, and columella width were statistically correlated between indirect anthropometry on cast model and direct anthropometry. However, the nasal tip protrusion and the left nostril floor width were not statistically correlated. Conclusion: Accuracy of indirect anthropometry on cast model can be influenced by cast model fabrication techniques and correct identification of landmarks. Nasal tip protrusion could be reduced by compression of the nasal tip in the process of cast model fabrication and nostril floor width can be varied by muscle relaxation of anesthetics and incorrect identification of subalare in cleft lip nasal deformity. If sufficient care is taken to make cast model and to define landmarks exactly, indirect anthropometry on cast model can be a reliable method as direct anthropometry.

• 대한치과의사협회지
• /
• 제55권12호
• /
• pp.862-869
• /
• 2017

Cleft lip and palate is the most common teratologic condition of oromaxillofacial units, probably associated with genetic and environmental causes. The goal of cleft surgery is to optimize facial esthetics and stomatognathic function while minimizing growth disturbances from surgical intervention. In this article, the author suggests the recent surgical strategies that minimize cleft nasal deformity and midfacial skeletal constriction. From the author's surgical experiences and literature reviews, only considerate surgeries would achieve functional improvement and facial esthetics in patients with cleft lip and palate.

• 대한구순구개열학회:학술대회논문집
• /
• 대한구순구개열학회 2002년도 종합학술대회
• /
• pp.27-27
• /
• 2002

• 대한두개안면성형외과학회지
• /
• 제12권2호
• /
• pp.97-101
• /
• 2011

Purpose: Nasal bone fracture is the most common type of facial bone fracture. The standard 6-view photography was not adequate to support the evaluation of nasal deformity and the results of closed reduction. The authors have standardized a bird's eye view photography to more effectively evaluate this nasal deformity. Methods: We reviewed the medical records and radiologic studies of 63 nasal bone fracture patients. We had taken clinical photography including bird's eye view that was standardized as nasal tip was aligned to Cupid's bow of upper lip and light was focused on the nasion of all 63 patients. Results: Nasal deviations and reductions were more noticeable on the newly standardized bird's eye view. This clinical photography was very useful to explain the results of reduction. Conclusion: It was concluded that this photography can be more reliable for evaluation of severity of nasal deformity and the result of closed reduction.

• Archives of Plastic Surgery
• /
• 제35권3호
• /
• pp.303-308
• /
• 2008

Purpose: The purpose of this study is to develop three-dimensional computerized anthropometry(3DCA) and to compare its reliability and accuracy 3DCA with manual anthropometry(MA) for measurement of lips and nasal deformities in unilateral cleft lips and palate(UCLP) patients. Methods: Samples were consisted of six UCLP patients whose facial plaster models were available immediately before and 3 months after the cleft lip surgery. MA of the facial plaster models was carried out using an electronic caliper. In 3DCA, three-dimensional auto-measuring program was used to digitize landmarks and to measure three-dimensional virtual facial models (3DVFM), which was generated with a laser scanner and 3D virtual modeling program. Intraclass correlation coefficients(ICC) were calculated to evaluate reliability and reproducibility of the variables in both methods, and Wilcoxon's signed rank test was done to investigate the difference in values of the same variables of facial models of each patient between two methods. Results: All ICC values were higher than 0.8, so both methods could be considered reliable. Although most variables showed statistical differences between two methods(p<0.05), differences between mean values were very small and could be considered not significant in clinical situation. Conclusion: In clinical situation, 3DCA can be an objective, reliable and accurate tool for evaluation of lips and nasal deformities in the cleft patients.

• 대한구순구개열학회지
• /
• 제7권1호
• /
• pp.1-16
• /
• 2004

본 연구에서는 구순접합술의 효과를 알아보기 위하여, 일측성 완전구순열을 가진 5명의 환아에서 Millard의 high haU-underminded adhesion과 Seibert 의 lip adhesion을 이용한 구순접합술후 Millard 변법을 이용한구순성형술을 시행하였다. 구순접합술은 상악치조분절 간의 관계를 개선해 주고 구순성형술을 쉽게해주며 최종적인 구순성형술 후 더욱 좋은 결과를 나타냈다. High kalf-underminded adhesion과 Seibert의 lip adhesion은 둘 다 넓은 구순열을 하는데 유용한 방법이며, 특히 Seibert의 lip ahesion은 강한 접합력을 얻을 수 있고 변위된 비중격의 개선 효과가 있으며 보다 심미적인 상순의 연속성을 얻게 해 주었다. 이상의 결과에서 넓은 완전구순열 환아에서 구순성형술에 앞서 구순접합술을 시행하면 상악치조분절 간의 관계를 개선시키고 구순성형술 후 최종적인 결과를 향상시킴을 알 수 있다.

• Archives of Plastic Surgery
• /
• 제44권3호
• /
• pp.210-216
• /
• 2017

Background In treating minor-form or microform cleft lip, obtaining an optimal result is a challenge because of the visible scarring caused by traditional surgery. We present a refined method using muscle overlapping with a minimal skin incision in patients younger than 3 years, a group characterized by thin muscle. Methods The surgical technique involves restoration of the notched vermillion using Z-plasty, formation of the philtral column using overlapping of an orbicularis oris muscle flap through an intraoral incision, and correction of the cleft lip nasal deformity using a reverse-U incision and V-Y plasty. A single radiologist evaluated ultrasonographic images of the upper lip. Results Sixty patients were treated between September 2008 and June 2014. The age at the time of operation ranged from 6 to 36 months (mean, 26 months). The follow-up period ranged from 8 to 38 months (mean, 20 months) in minor-form cases and from 14 to 64 months (mean, 37 months) in microform cases. A notched cupid's bow was corrected in 10 minor-form cases and 50 microform cases. Ultrasonographic images were obtained from 3 patients with minor-form cleft lip and 9 patients with microform cleft lip 12 months after surgery. The average muscle thickness was 4.5 mm on the affected side and 4.1 mm on the unaffected side. Conclusions The advantages of the proposed procedure include the creation of an anatomically natural philtrum with minimal scarring. This method also preserves the continuity and function of the muscle and provides sufficient augmentation of the philtral column and nostril sill.

• 대한치과교정학회지
• /
• 제50권6호
• /
• pp.383-390
• /
• 2020

Objective: To investigate the distribution, side involvement, phenotype, and associated anomalies of Korean patients with craniofacial clefts (CFC). Methods: The samples consisted of 38 CFC patients, who were treated at Seoul National University Dental Hospital during 1998-2018. The Tessier cleft type, sex, side involvement, phenotype, and associated anomalies were investigated using non-parametric statistical analysis. Results: The three most common types were #7 cleft, followed by #0 cleft and #14 cleft. There was no difference between the frequency of male and female. Patients with #0 cleft exhibited nasal deformity, bony defect, and missing teeth in the premaxilla, midline cleft lip, and eye problems. A patient with #3 cleft (unilateral type) exhibited bilateral cleft lip and alveolus. All patients with #4 cleft were the bilateral type, including a combination of #3 and #4 clefts, and had multiple missing teeth. A patient with #5 cleft (unilateral type) had a posterior openbite. In patients with #7 cleft, the unilateral type was more prevalent than the bilateral type (87.0% vs. 13.0%, p < 0.001). Sixteen patients showed hemifacial microsomia (HFM), Goldenhar syndrome, and unilateral cleft lip and palate (UCLP). There was a significant match in the side involvement of #7 cleft and HFM (87.5%, p < 0.01). Patients with #14 cleft had plagiocephaly, UCLP, or hyperterorbitism. A patient with #30 cleft exhibited tongue tie and missing tooth. Conclusions: Due to the diverse associated craniofacial anomalies in patients with CFC, a multidisciplinary approach involving a well-experienced cooperative team is mandatory for these patients.

• Archives of Plastic Surgery
• /
• 제43권3호
• /
• pp.248-253
• /
• 2016

Background Financial, clinical, and psychological considerations have made same-day surgery an attractive option for a variety of procedures. This article aimed to analyse the postoperative results of same-day primary unilateral cleft nasolabial repair. Methods This study was performed from 2011 to 2014. Unilateral cleft lip patients fulfilling the inclusion criteria were preoperatively classified as mild, moderate, and severe. All patients underwent same-day surgery and were discharged after satisfying the appropriate clinical criteria, receiving thorough counselling, and the establishment of a means of communication by phone. Postoperative outcomes were assessed and stratified according to preoperative severity and the type of repair. Results A total of 423 primary unilateral cleft lip patients were included. Fisher's anatomical subunit approximation technique was the most common procedure, followed by Noordhoff's technique. The postoperative outcome was good in 89.8% of cases, fair in 9.9% of cases, and poor in 0.2% of cases. The complication rate was 1.18% (n=5), and no instances of mortality were observed. The average hospital stay was 7.5 hours, leading to a cost reduction of 19% in comparison with patients who stayed overnight for observation. Conclusions Mild unilateral cleft lip was the most common deformity for which Fisher's anatomical subunit approximation technique was performed in most of the cases, with satisfactory postoperative outcomes. Refinements in the cleft rhinoplasty techniques over the course of the study improved the results regarding cleft nasal symmetry. Single-day primary unilateral cleft cheiloplasty was found to be a cost-effective procedure that did not pose an additional risk of complications.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권4호
• /
• pp.401-406
• /
• 1999

편측성 혹은 양측성 구순구개열환자에서 일차 구순 성형술후 나타나는 이차 구순 기형은 세심한 관찰을 통한 문제점에 대한 정확한 인식을 통해 상순, 홍순부, 피부와 근육등의 적절한 교정술로 심미성, 기능적 회복을 이룰 수 있다. 저자들은 이차 구순 기형으로 나타난 구륜근의 부정유합, 휘파람 변형과 부족한 입술등에 대해 적절한 성형술로 심미적, 기능적으로 양호한 결과를 얻었기에 보고하는 바이다.