• Restorative Dentistry and Endodontics
• /
• v.48 no.3
• /
• pp.28.1-28.13
• /
• 2023

Objectives: This study aimed to investigate the effect of the application method of 2% chlorhexidine (CHX) and its influence on the adhesion of fiberglass posts cemented with a self-adhesive resin cement. Materials and Methods: Sixty human mandibular premolars were endodontically treated and divided into 5 groups (n = 12), according to the canal irrigant and its application method: 2 groups with conventional syringe irrigation (CSI)-2.5% sodium hypochlorite (NaOCl) (control) and 2% CHX- and 3 groups with 2% CHX irrigation/activation-by passive ultrasonic irrigation (PUI), Easy Clean file, and XP-Endo Finisher file. Two roots per group were evaluated for smear layer (SL) removal by scanning electron microscopy. For other roots, fiber posts were luted using a self-adhesive resin cement. The roots were sectioned into 6 slices for push-out bond strength (BS) (7/group) and nanoleakage (NL) (3/group). Data from SL removal were submitted to Kruskal-Wallis and Student-Newman-Keuls tests (α = 0.05). Data from BS and NL were evaluated by 2-way analysis of variance and Tukey's test (α = 0.05). Results: For SL removal and BS, the CHX irrigation/activation promoted better values than CSI with CHX (p < 0.05), but it was not significantly different from CSI with NaOCl (p > 0.05). For NL, the lowest values were obtained by the chlorhexidine irrigation/activation groups (p < 0.05). Conclusions: Active 2% CHX irrigation can be used to improve the post space cleaning and adhesion before fiber post cementation with self-adhesive resin cements.

• Journal of Hydrogen and New Energy
• /
• v.35 no.1
• /
• pp.66-74
• /
• 2024

This study addresses the escalating issue of worldwide hydrogen gas accidents, which has seen a significant increase in occurrences. To comprehensively evaluate the risks associated with hydrogen, a two approach was employed in this study. Firstly, a qualitative risk assessment was conducted using the bow-tie method. Secondly, a quantitative consequence analysis was carried out utilizing the areal locations of hazardous atmospheres (ALOHA) model. The study applied this method to two incidents, the hydrogen explosion accident occurred at the Muskingum River power plant in Ohio, USA, 2007 and the hydrogen storage tank explosion accident occurred at the K Technopark water electrolysis system in Korea, 2019. The results of the risk assessments revealed critical issues such as deterioration of gas pipe, human errors in incident response and the omission of important gas cleaning facility. By analyzing the cause of accidents and assessing risks quantitatively, the effective accident response plans are proposed and the effectiveness is evaluated by comparing the effective distance obtained by ALOHA simulation. Notably, the implementation of these measures led to a significant 54.5% reduction in the risk degree of potential explosions compared to the existing risk levels.

• The Korean Fashion and Textile Research Journal
• /
• v.26 no.4
• /
• pp.411-423
• /
• 2024

This study examined the dyeability and functionality of silk fabrics dyed using shiitake mushroom pins discarded in large quantities on mushroom farms. FT-IR and UV-Vis spectral analyses showed that polyphenols and flavonoids were present in the hot-water extract of shiitake mushroom pins. Optimal dyeing conditions for silk fabrics were a dye concentration of 50% (v/v), dyeing temperature of 80℃, dyeing time of 60 minutes, and dyebath pH of 5.3. The post-mordant method showed a greater effect on the increase in dye uptake and color change than the pre-mordant method. Unmordanted fabrics appeared as a YR Munsell color. Except for the Cu-mordant, all post-mordanted fabrics produced a Y Munsell color. The FE-SEM/EDX analysis confirmed that the natural iron solution and mud contained various metal ions. The Fe component was found to have the greatest effect on the dye uptake and color properties. The colorfastness of the unmordanted fabrics to washing, dry cleaning, rubbing, and perspiration was excellent (above grade 4), whereas light was grade 3-4. In the case of post-mordanted fabrics with a natural iron solution, the colorfastness to washing, wet rubbing, and light improved by 0.5 grades. For post-mordanted fabrics with mud, the colorfastness to light and sweat improved by 0.5 grades. The bacterial reduction rate for staphylococcus aureus in fabrics dyed with shiitake mushroom pin extract was excellent at over 99.9%, the bacterial reduction rate for klebsiella pneumoniae was 98.1%, and the deodorization rate was excellent at 90%. These results indicate that shiitake mushroom pins can be used as a sustainable, functional natural dye.

• Journal of Veterinary Science
• /
• v.25 no.5
• /
• pp.72.1-72.14
• /
• 2024

Importance: Identifying bovine mastitis agents using molecular methods to reveal their phylogenetic relationships and antimicrobial resistance profiles is essential for developing up-to-date databases in mastitis cases that cause severe economic losses. Objective: This study examined bacterial mastitis agents in cows with clinical and subclinical mastitis observed in various dairy cattle farms to reveal their phylogenetic relationships and antibiotic resistance properties. Methods: Sixty-two clinical and subclinical bovine mastitis milk samples were collected from 15 dairy farms. The polymerase chain reaction (PCR) was used to amplify the 16S rRNA gene regions of the bacteria. The 16S rRNA gene sequences obtained from sequencing include the V4-V6 regions. The strains were compared using a similarity analysis method that produced phylogenetic trees using the Molecular Evolutionary Genetics Analysis 11 program. Antibiotic susceptibilities were determined using the Kirby-Bauer disk diffusion method. Results: Sixty-three bacteria were isolated and identified in this study. The most isolated bacteria from all mastitis cases were Staphylococcus spp. (30.2%), Escherichia coli (25.4%), Streptococcus spp. (14.3%), and Aerococcus spp. (7.9%), respectively. The phylogenetic trees were drawn from the 16S rRNA sequences. Some of these bacteria showed resistance to different types of antibiotics at varying rates. Conclusions and Relevance: The bacteria isolated in this study originated from environmental sources. Regular cleaning of barns and proper hygiene practices are essential. Regular screenings for mastitis should be conducted in herds instead of the random or empirical use of antibiotics.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.2
• /
• pp.185-194
• /
• 2018

The objective of this study was to compare the shear bonding strength of zirconia after cleaning the crown contaminated by saliva or blood and determine the effect of thermocycling. 180 specimens were embedded in acrylic resin. 20 Specimens in the positive control group were bonded with resin cement without contamination. 20 Specimens in the negative control group were washed with water for 20 seconds and then dried for 10 seconds. 120 Specimens contaminated by saliva or blood were cleaned by using three cleaning methods: 37% phosphoric acid gel, commercial cleanse, and 2.5% NaOCl. All samples were bonded with resin cement and divided into two subgroups: One was not aged, and the other was tested with 30,000 thermocycling. In both groups contamination by saliva and blood, no statistically significant difference was not found in control, groups cleansed by commercial cleanser and 2.5% NaOCl. When the groups cleansed with water and 37% phosphate gel were compared with the control, significantly low shear bond strength was shown. Thermocycling group showed statistically significantly low shear bond stress compared to the groups without thermocycling. When zirconia was contaminated by saliva or blood, its original shear bond strength could be obtained if it was cleaned with commercial cleanser or 2.5% NaOCl.

• Journal of Family Resource Management and Policy Review
• /
• v.17 no.2
• /
• pp.55-74
• /
• 2013

This research developed standardized satellite accounts for household production to measure the entire production in Korea using representative Korean data. This study utilized standardized methods for measuring the expenditure and consumption of expendable supplies as an element of intermediate goods in household production. The results of this research can be summarized as follows. First, the total value of household production in Korea in 2009 turned was 268 trillion won, which would be 10.16% of the GDP, based on using the method of replacement by specialty for estimating the value of housework, while it was 356 trillion won, which would be 13.5% of the GDP (2,636 trillion won), based on the method of opportunity cost. Second, the economic value of labor invested in household production was 220 trillion won when using the data from 12 main corresponding wages in the market, while it was 203 trillion won when using the method of total replacement, which used the wages of housekeepers, and 290 trillion won when using the method of opportunity cost in measuring the value of housework labor. Third, in estimating the proportion by section in terms of the total value of household production, the portion of labor in household production was measured from 76% to 82%, depending on the methods used, which is the most significant section. These results indicate that housework has the characteristics of labor-centered work. On the other hand, the value of expenditure on and consumption of expendable supplies, as one element of intermediate goods, is 63 trillion won, which is 17.7% (using the method of opportunity cost in measuring the labor of housework) of household production. Also, the value of capital goods, as the other element of intermediate goods is 2.3 trillion won, which is 0.9% (using the method of opportunity cost) of household production. In conclusion, as an element of household production, housework labor was higher in household production than expenditures on expendables, especially for cooking, cleaning, and caring for children. In the future, people should be cautious about estimating that the amount of household work could be reduced, as women's labor in the market and the household work produced by the market will increase.

• Journal of dental hygiene science
• /
• v.7 no.4
• /
• pp.281-286
• /
• 2007

The purpose of this research was to find out their perception of the dental hygiene and level of its knowledge by estimating status of senior adults' dental health management. First, questionnaires were distributed to the 256 target senior adults aged more than 60, who were going to school for senior adults located in Ulju Country and the survey was conducted by interview directly. The results were as follows; 1. As for tooth brushing method, scrubbing method was used in male and rolling method was used in female and the survey results statistically revealed that rolling method was the most used in aged from 60 to 70(68.1%) and scrubbing method was the most used in aged more than 70(80.4%)[p < 0.001]. 2. As for reason of visiting dental clinic, female respondents accounting for the highest said they visited dental clinic when they feel a pain in the teeth and as for frequence of dental clinic, male respondents visited dental clinic for a once per a year. there was no difference statistically according to age(47.9%). 3. As for the perception of the necessity of dental prosthetic treatment, there was higher positive response in the female than male, in the lower aged groups than higher aged group[p<0.05]. 4. As for the question of whether to use of denture or not now, the survey results was statistically that the higher aged group and male groups were higher used dentures [p < 0.001]. 5. As for maintenance of denture, female respondents said the highest that they keep it in cold water after cleaning(95.5%), there was no difference statistically according to age and educational background [p < 0.001].

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.291-298
• /
• 2016

Electrochemical water treatment process as a useful treatment method for the removal of non-degradable matter has been consistently studied for several decades. Key process of electrochemical water treatment are oxidation reaction from an anode and reduction from a cathode. In this study, the effect of pre-treatment methods in the insoluble electrode manufacturing process for the water treatment has been evaluated for the life time of electrode The results of this study showed that pre-treatment methods of a base metal such as surface roughness, clean method and interlayer formation influenced to life time of electrode when the same condition (catalyst electrode layer coating method and material system) was applied for pre-treatment methods. This study was conducted by using $IrO_2/Ti$ electrode In the test of sand-blasting process, an electrode manufactured by using sanding media of different sizes resulted in the most effective electrode life time when the size of alumina was used for $212{\sim}180{\mu}m$ praticle size (#80). The most effective method was considered using arc plasma in the additional roughness control and cleaning process, sputtering method to form Ta type interlayer formation process.

• The Journal of Engineering Geology
• /
• v.21 no.4
• /
• pp.369-379
• /
• 2011

The application of appropriate rehabilitation works can improve productivity and water quality of clogged wells, with extending the operation of the wells for a certain period. This study verified rehabilitation effect of the clogged wells by means of explosive method and air brush surging and by using hydraulic tests, water quality, and geophysical logs (optical and acoustic televiewer logs) before and after the cleaning works on the two wells drilled in bedrock in Mt. Geumjeong, Busan City. Air-brush surging method resulted in maximum 273% increase of the productivity with the concentration of $F^-$, $SiO_2$, and a decrease of turbidity and the concentration of $Cl^-$, $NO_3^-$. The explosive method resulted in maximum 156% increase of the productivity with an increase of the concentration of $F^-$, $SiO_2$ and a decrease of turbidity, $Cl^-$, $NO_3^-$.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.1
• /
• pp.32-40
• /
• 2022

In this study, the appropriate unit cost in grassland establishment was redeveloped by the grassland establishment method and work criteria. The grassland establishment method was divided into tillage establishment (all logging) and no-tillage establishment (all logging and partial logging). The price for the work criteria by the establishment method was presented for each permission/authorization and establishment work. In permission/authorization for grassland establishment, the cost of each work criteria was of environmental impact (small scale environmental impact) assessment, disaster impact assessment, cadastral serving fee, forest survey, and connection fee for control of mountainous districts. In establishment was of logging, cleaning/gruffing, plowing/soil preparation, seeding, fertilization, livestock manure compost, seed, herbicide, labor cost (fertilizer, seed and herbicide), soil consolidation, cattle trail, and fence. The unit cost of grassland establishment was KRW 115,894,212 for the tillage establishment, and KRW 110,281,572 and KRW 106,680,122 for the all and partial logging of the no-tillage establishment, respectively. The current study redeveloped the establishment method, work criteria, and estimation of the unit cost of grassland establishment. It can be usefully used to carry out government projects to support related to establishment and maintenance of grassland.