• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.525-538
• /
• 2018

Myazedi Quadrilingual Stone Inscription of Myanmar, inscribed to the World Heritage List in 2015, is a rare historical artifact which has an exact date of inscription. It is a written record that displays the history, religion, and culture of Myanmar. Since the surface of the Stone Inscription has been rubbed with ink many times during the process of making printed copies for interpretation and academic research, it has developed a serious stain problem. Therefore, scientific analysis of the stain and research on the treatment for its removal have been conducted. In particular, an experiment was conducted on stain removal using laser cleaning and chemical treatment. The stains are mostly ink dirt, which accumulated from previous ink-rubbing processes. In order to conduct the experiment under similar conditions, a sample with similar stain has been reproduced, and a set of different conditions for treatment was applied to the sample to determine an effective solution. Laser cleaning was found to be effective in removing stains from most samples. However, chemical treatment showed different results. The physical friction method using ethanol provided the best result. In conclusion, laser cleaning is an effective universally-applicable technique but chemical treatment with laser cleaning can be considered an alternative method in certain situations.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.5
• /
• pp.411-420
• /
• 2017

Objective: The purpose of this study is to analyze the accident characteristics according to the gender of the injured workers in building cleaning and to reflect them in the Industrial Accident Prevention Policy. Background: An analysis of industrial accidents is an essential process for establishing systematic industrial accident prevention measures. In order to establish industrial accident prevention measures for workers effectively, it is necessary to analyze accident characteristics by job type for workers who do the same work. Method: In this study, we analyzed the accident characteristics of 1,645 janitors who were approved of work-related injuries in 2015. We also analyzed the characteristics according to gender by dividing them into worker-related factors and accident-related factors. Results: The accidents caused to the janitors showed different characteristics according to gender, age, work experience, agency of accident, and distribution of original cause materials. In other words, 70.2% occurred to workers over 60 years old and 56.2% occurred to unskilled workers with less than a year of work experience. In the case of accident pattern, 79.1% occurred in tripping (slip) hazards, and 68.2% of accidents occurred on the floor (including the ground) and the stairs, indicating that the accident occurred most frequently during cleaning work on the floor or stairs. Conclusion and Application: The results of the study on the accident characteristics of the janitors can be used as basic data for systematic preventive measures against accidents occurring to the elderly female workers in the service industry.

• Korean Journal of Human Ecology
• /
• v.6 no.2
• /
• pp.115-120
• /
• 1997

To investigate the cognition of labeling system and its problems, problems in laundry, and consumer's dissatisfaction and to decrease problems in management of clothing products, total 476 subjects were surveyed in Taejon. The major results were as follows ; 1. The cognition of labeling system was understood by 93.1% of respondents, and 72.9% of them prefer to recognized labeling by figures and letters than by either of them. Most of respondents got the knowledge of labeling system from school. The most frequently experienced mislabeling was the label for management. 2. In cleaning, 60.4% of respondents made their decisions of the laundry method after seeing labeling system. When the label recommanded either of hand washing or dry cleaning, they usually laundered with hand washing after a few times of dry cleaning. The first consideration factor for laundry was fiber composition of textiles. 3. About 70% of respondents understood ironing, laundry, and drying mark on labeling system, and 53.8% understood fiber composition and bleaching. 4. More than 90% of respondents experienced dissatisfaction in handling clothing products. The reason of dissatisfaction was deformation and decoloring after laundry. Most of respondents experienced change of tactile sensation, too.

• Journal of Nutrition and Health
• /
• v.34 no.6
• /
• pp.701-714
• /
• 2001

The purpose of this study was to apply a PERT-type system, a combination of the project evaluation and review technique(PERT) and critical path method(CPM) on the employees' work time management of flood preparation, assembly, transportation and cleaning in home-delivered meals program for elderly The resources allotment heuristic program was developed by considering the number of employees and cooking utilities, being limited resources of home- delivered meals program. This program could assign the employees to perform the works included in flood preparation, assembly, transportation ind cleaning. Critical path and activities ware identified by PERT-type system on the basic of work time investigation in five senior centers. Work sheets were invented to perform the work by the shortest path with flexible employees'maximum flow As a result of the work time investigation, the most prevalent activities were ones of preparation in center C and E. Besides, the preparation(over fifty percent) was the most proportion among flood preparation, assembly, transportation and cleaning in center C and E. Critical path and activities of 'C'center were cucumber in sauce preparation path and assembly, wrapping in assembly path and case delivery in transportation path. Critical path and activities of 'E'center were Pan-fried Potato Preparation Path and assembly, case covering, wrapping in assembly Path. The work sheet invented by the heuristic program and PERT-type system reduced the work completion time and man hours in both centers.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.2
• /
• pp.11-15
• /
• 2013

The wafer bonding process becomes a flexible approach to material and device integration. The bonding strength in 3-dimensional process is crucial factor in various interface bonding process such as silicon to silicon, silicon to metals such as oxides to adhesive intermediates. A measurement method of bonding strength was proposed by utilizing AFM applied CNT probe tip which indicated the relative simplicity in preparation of sample and to have merit capable to measure regardless type of films. Also, New Tool was utilized to measure of tip radius. The cleaned $SiO_2$-Si bonding strength of SPFM indicated 0.089 $J/m^2$, and the cleaning result by RCA 1($NH_4OH:H_2O:H_2O_2$) measured 0.044 $J/m^2$, indicated negligible tolerance which verified the possibility capable to measure accurate bonding strength. And it could be confirmed the effective bonding is possible through SPFM cleaning.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1376-1383
• /
• 2002

Seismic qualification of the Air Cleaning Units for nuclear power plant Ulchin 5&6 has been performed with the guideline of ASME Section III and IEEE 344 code. By using the structural and geometrical similarity analysis, the three models to be analyzed are condensed into a single model and, at the same time, the excitation forces and other operating loads for each model are encompassed with respect to different loading conditions. As the fundamental frequencies of the structure are found to be less than 33Hz, which is the upper frequency limit of the seismic load, response spectrum analysis using ANSYS is performed in order to combine the modal stresses within the frequency limit. In order to confirm the structural and electric stability of the major components, modal analysis theory is adopted to derive the required response spectrum at the component locations. As the all combined stresses obtained from the above procedures are less than allowable stresses and no mechanical or electrical failures are found from the seismic testing, the authors confirm the safety of the nuclear equipments Air Cleaning Units studied in this paper.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.11
• /
• pp.1193-1201
• /
• 2013

Improved far field type(improved type) megasonic applicable to the cleaning equipment of single wafer processing type has been developed. In this study, to improve the uniformity of acoustic pressure distribution(APD), we utilize far field with relatively uniform APD, piezoelectric ceramic with a triangle hole in its center to prevent standing wave resulted from radial mode, and reflected wave from the wall of waveguide. On the basis of these methods, two analysis models of improved type were designed to which piezoelectric ceramic of different shape of electrode attached, and APD were analyzed by means of finite element method, and then one of them was selected by analysis results, finally, the selected model was fabricated. Test results show that the fabricated is better in the uniformity of APD than the imported and the conventional, also the fabricated shows high particle removal efficiency of 92.3% using DI water alone as a cleaning solution.

• Journal of Construction Engineering and Project Management
• /
• v.5 no.2
• /
• pp.44-52
• /
• 2015

Various approaches have been used in crack preparations and each of the approaches has advantages and disadvantages. Although the routing method has been widely used and seems to be the best approach among the approaches, it is not a complete solution for crack preparation. This paper compares and evaluates a pneumatic crack cleaning device (CCD) developed by Robotics and Intelligent Construction Automation group at Georgia Tech, over existing devices. Surveys were conducted to discover factors that affect the performance of crack/joint preparation work. Then, data for such information were collected via field tests for devices such as router, heat lancer, air blower and CCD. Performed field test results and follow-up interviews demonstrated that the utilization of CCD has potential to offer improvements in productivity, safety, and maintenance cost. An analytic hierarchical procedure (AHP) and economic analyses were conducted. The AHP analysis considered three factors including safety, quality and productivity while the economic analyses examined the alternatives in various ways. The results indicated that the CCD was ranked first and second for the AHP analysis and economic analysis, respectively. In conclusion, the field tests and results revealed that the utilization of CCD achieved satisfactorily in performance, quality, safety and control, and showed that it has high potential in crack cleaning practice.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.5
• /
• pp.300-306
• /
• 2005

In this paper we present a guideline to evaluate how easy the use of personal robots is and how good their learning abilities are, based on the analysis of their built-in commands, user interfaces, and intelligences. Recently, we are living with robots that can be able to do lots of roles; cleaning, security, pets and education in real life. They can be classified as home robots, guide robots, service robots, robot pets, and so on. There we, however, no standards to evaluate their abilities, so it is not easy to select an appropriate robot when a user wants to buy it. Thus, we present, as a guideline that can be a standard for the evaluation of the personal robots, the standards by means of analyzing existing personal robots and results of the recent research works. We will, also, demonstrate how to apply the evaluation method to the cleaning robot as an example.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.404-409
• /
• 2001

Seismic qualification of the Air Cleaning Units for nuclear power plant Ulchin 5&6 has been performed with the guideline of ASME Section III and IEEE 344 code. By using the structural and geometrical similarity analysis, the three models to be analyzed is condensed into a single model and, at the same time, the excitation forces and other operating loads for each model are encompassed with respect to different loading conditions. As the fundamental frequencies of the structure are found to be less than 33Hz, which is the upper frequency limit of the seismic load, response spectrum analysis using ANSYS is performed in order to combine the modal stresses within the frequency limit. In order to confirm the structural and electric stability of the major components, modal analysis theory is adopted to derive the required response spectrum at the component locations. As the all combined stresses obtained from the above procedures are less than allowable stresses and no mechanical or electrical failures are found from the seismic testing, the authors confirm the safety of the nuclear equipments Air Cleaning Units studied in this paper.