• 직업교육연구
• /
• 제36권2호
• /
• pp.23-50
• /
• 2017

이 연구의 목적은 전문대학 교수의 조직변화 수용성과 개인 및 조직 변인의 위계적 관계를 구명하는 데 있었다. 이 연구의 모집단은 2015년을 기준으로 우리나라 전문대학에 재직하고 있는 전임교수 12,920명이었으며, 자료 수집을 위한 조사 도구로는 질문지가 사용되었다. 질문지는 2015년 5월 26일부터 6월 13일까지 총 800부가 배포되었고, 이 중 445부가 회수되었다. 이 중 최종적으로 총 441부가 자료 분석에 사용되었으며, HLM 6.0 프로그램을 이용하여 위계적 선형모형 분석을 실시하였다. 연구 결과는 다음과 같다. 첫째, 전문대학 교수의 조직변화 수용성 수준은 평균 3.94로 대다수의 교수들이 조직변화를 수용하는 것으로 나타났다. 둘째, 조직변화 수용성의 변량은 56.5%가 개인 차이, 43.5%가 조직 차이에 의한 것으로 나타났다. 셋째, 개인 변인 중에는 교수의 변화에 대한 기대, 주인의식, 보직경험, 근속년수, 직무안정성의 순으로 조직변화 수용성에 정적 영향을 미치는 반면, 근속년수는 부적 영향을 미치는 것으로 나타났다. 넷째, 조직 변인 중에는 조직변화수준, 참여적 의사결정, 관계지향문화, 변화관련정보 접근성의 순으로 조직변화 수용성에 정적 영향을 미치는 것으로 나타났다.

• 대한치과보철학회지
• /
• 제34권2호
• /
• pp.266-276
• /
• 1996

Numerous factors are known to affect the accuracy of elastomeric impression materials. Factor often overlooked is the quality of the bond between putty and wash during corrective reline impression technique. The putty-wash bond strength must be strong enough to over-come the local stress at putty-wash interface. It is not always possible to avoid saliva contamination in making corrective wash impres-sion. And putty preliminary impression material con be used as a template for provisional restoration. Human saliva and the residual monomer of autopolymerizing acrylic resin are thought to affect the bond strength and the failure type. This study examined the effect of contaminants like human saliva, and residual resin monomer on the putty-wash bond strength and the effectiveness of treatment. 1. Of the tested three brands of Vinyl Polysiloxane impession meterial, Express Exhibited the greatest bond strength followed by Eamix and Perfect showed the lowest putty-wah bond strength. 2. Coating the putty substrates with human saliva did not produce decreased failure load in all the breands of Vinyl Polysiloxane impression meterail. 3. Of the three brands of VPS impression material that were exposed to methhylmethacry-late resin(Jet), only the putty-wash bond strength of the Perfect group diminished signifi-cantly. Moreover, all the specimens from group C of Perfect exhibited adhesive failure. 4. Exposing the substrates to ethylmethacrylate resin(SNAP. diminished the putty-wash bond strength significantly. With Perfect and Examix, failure occurred cohesively through the light-body, whereas with Express, failure occurred adhesive-cohesively. 5. Removing approximately 1mm thickness of the contaminated putty interface was the most effective treatment in countering the undesirable effect caused by residual resin monomer. The putty-wash bond strength of the groups that were treated with 1mm even putty reduction was not significantly different from those of control groups. With Perfect and Examix, cleaning the specimens with gauze soaked in 70% isopropyl alcohol increased the putty-wash bond strength, but was not as effective as 1mm even reduction of contaminated putty substrates. With Express, 70% isoproryl alcohol treatment exhibi0ted comparable putty-wash bond strength to that of control group.

• 한국진공학회지
• /
• 제14권1호
• /
• pp.17-23
• /
• 2005

본 논문은 글로우방전 질량분석법(Glow Discharge Mass Spectrometry: GDMS)을 이용하여 구리 박막내의 미량 불순물의 농도분석과 음의 기판 바이어스에 대한 구리 박막내의 불순물의 농도변화에 대해서 고찰하였다. 구리 박막은 실리콘 기판 위에 비질량 분리형 이온빔 증착장비를 이용하여 기판 바이어스를 걸지 않은 경우와 -50 V의 기판 바이어스를 걸은 상태에서 증착하였다. 전기를 통하지 않는 분석 샘플의 경우, 직류(DC) GDMS에 의한 분석시, 샘플 표면에서의 charge-up 효과에 의해 분석에 어려움이 있었지만, 본 실험에서는 간편하게 분석이 가능하도록 샘플을 알루미늄 포일(foil)로 감싸서 구리 박막으로부터 실리콘 기판 뒤의 샘플 홀더까지 전기적 접촉이 이루어지도록 하였다. 구리 타겟과 증착된 구리 박막들에 대한 GDMS 분석결과에 의해서, 전체적으로 박막내의 불순물의 양이 음의 기판 바이어스에 의해 줄어듦으로써 구리 박막의 전체 순도를 높일 수 있다는 것을 알게 되었다. 음의 기판 바이어스에 의한 불순물들의 농도변화는 각각의 불순물의 이온화 포텐셜의 차이에 의한 것으로, 박막 증착시 플라즈마내의 Penning ionization effect와 본 논문에서 제시한 이온화 과정에 의해 각 불순물의 농도변화가 설명되어질 수 있었다. 또한, 기판 위에서의 구리 이온들의 충격에 의한 cleaning effect도 박막내의 불순물의 농도변화에 기여했다고 판단된다.

• 대한환경공학회지
• /
• 제28권2호
• /
• pp.207-215
• /
• 2006

본 연구에서는 화학적 1차 처리 침출수(시료 I)와 생물학적 처리 침출수(시료 II)를 대상으로 한 막 분리 공정에서 막의 막힘현상을 개선하기 위한 기술로서 초음파 조사방법을 도입하여 그에 대한 영향을 평가하였다. 초음파의 투과속도 개선효과에 관한 실험은 주기적으로 초음파를 조사할 수 있는 초음파막 분리장치를 제작하여 막의 재질(PS과 PVDF)과 막의 종류(MF와 UF), 초음파의 단일주파수(40 kHz와 120 kHz), 초음파의 세기(200 W와 400 W)에 따라 실시하였으며. 아울러 40 kHz와 120 kHz를 동시에 사용하는 복합초음파 조사 실험을 실시하였다. 주기적인 초음파 조사에 관한 시나리오 실험을 통해 UF막과 MF막을 비교한 결과 MF계열의 막에서 더 높은 투과속도의 개선효과를 나타냈으며, 두 가지 PS와 PVDF재질로 만들어진 MF막의 경우 PVDF재질의 MF막이 더 높은 개선효과를 지속적으로 나타내었다. 또한 용액(폐수)의 특성에 따라 초음파 조사에 의한 투과속도의 개선효과가 다르게 나타났으며, 두 가지 초음파주파수(40 kHz과 120 kHz)를 동시에 활용한 복합초음파를 주기적으로 조사한 경우에 투과속도의 상승률은 세정효과가 큰 낮은 주파수(40 kHz)의 단일초음파를 이용하는 경우보다 작았으나, 재막힘 현상은 복합초음파를 사용하는 경우가 더 크게 억제되어 막의 투과속도 개선효과가 지속적으로 유지되었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 추계학술발표회 초록집
• /
• pp.15-15
• /
• 1999

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.

• 서비스연구
• /
• 제12권2호
• /
• pp.117-134
• /
• 2022

본 연구는 프로스포츠 관람요인이 구단 이미지, 구단 만족, 그리고 구단 평판에 어떤 영향을 미치는지를 파악하기 위하여 2021-2022 KBL 프로농구 원주경기장을 방문한 관람객을 대상으로 설문조사를 실시하였다. 프로스포츠 관람요인으로는 경기장, 경기상황, 관람비용, 관람촉진 등 4개 요인을 고려하였다. 총 3번의 경기를 통해 150부씩 총 450부의 설문지를 배포하여 불성실하게 응답한 39부의 설문지는 제외한 411부의 유효한 설문지를 최종적인 분석자료로 이용하였다. 설문에 참여한 관람객들에게 연구 목적과 취지를 설명한 후에 설문 데이터 수집을 실시하였다. 수집된 자료는 데이터 코딩과 클리닝 과정을 거친 후에 SPSS 통계 패키지를 활용하여 분석하였다. 분석 결과는 다음과 같다. 첫째, 프로스포츠 관람요인이 구단 이미지에 미치는 영향은 설명력은 45.1%로 프로스포츠 관람요인은 경기장, 경기상황, 관람촉진에 유의하게 나타났고 관람비용에 아무런 영향을 미치지 못하였다. 둘째, 프로스포츠 관람요인이 구단 만족에 미치는 영향은 설명력이 42.5%로 프로스포츠 관람요인 중 경기장, 경기상황, 관람비용, 관람촉진에 모두 유의하게 나타났다. 셋째, 프로스포츠 관람요인이 구단 평판에 미치는 영향은 설명력이 62.1%로 프로스포츠 관람요인은 경기장, 관람비용, 관람촉진에 유의하게 나타났고 경기상황에 아무런 영향을 미치지 못하였다. 결국, 구단의 브랜드 가치를 높이기 위해서는 관람비용을 낮추는 것 보다 시설이나 식음료 등의 품질을 높이고, 관람객을 위한 이벤트를 활성화하는 것이 훨씬 효과적이라는 점을 연구결과로 제시할 수 있었다.

• 한국의류학회지
• /
• 제38권6호
• /
• pp.929-941
• /
• 2014

Dyeability of Indian natural dyestuffs to fabrics was investigated. Indian dyestuffs are more inexpensive than domestic dyestuffs purchased at oriental medicine stores. We studied the dyeability of madder, marigold, and pomegranate imported from India on cotton, silk, and wool fabrics. Dyebaths of a combination ratio of 80:20, 60:40, 50:50, 40:60 and 20:80 of madder and marigold, fabrics with orange colors were dyed. To evaluate the dyeability of dyed fabrics, K/S values, Munsell color values and CIE L, a, b, ${\Delta}E$ were measured. The dyeability of fabrics dyed in dyebaths of pH 4 and pH 7 were higher than pH 10. The dyeability in pH 4 was better than pH 7. Silk fabrics dyed with madder and marigold showed good dyeability and wool fabrics showed good affinity in madder dyebath and fair affinity in marigold dyebath. Cotton fabrics showed fair affinity in a marigold dyebath of pH 4 and pH 7. Cotton fabrics dyed with a 60:40 ratio of madder and marigold showed 4.76YR of Munsell color value. Silk Fabrics dyed with a 40:60 ratio showed 4.76YR and wool fabrics dyed with 20:80 ratio showed 5.57RY. The ratios produced the closest colors to 5.0YR of orange. This result indicated that marigold had a more powerful effect on cotton fabrics while madder was stronger on wool fabrics. Fading grades of washing colorfastness of wool and silk fabrics dyed in mixed dyebaths were higher than 3.5-4.0 and higher than homogeneous dyebaths. Staining grades of washing colorfastness of all dyed fabrics were between grades 3.5-5.0. Colorfastness to dry-cleaning was high as grades 4.0-5.0 in all of dyed fabrics. Colorfastness to light of dyed fabrics showed a fair grade of 3.5-5.0; in addition, wool fabrics showed lower grades than silk and cotton fabrics.

• 한국염색가공학회지
• /
• 제23권4호
• /
• pp.263-273
• /
• 2011

Digital textile printing(DTP) technology made considerable advances in recent years. In this study, a pre-treatment agent has been prepared for the better coloration of digital textile printing. The ink formulation contained three kinds of 5g thickener (CMC, Sodium alginate, Dextrin), 25g urea, 5g sodium carbonate, and 465g distilled water. The optimal sharpness of outline was found in the 1-3% concentration of the pre-treating agent with a viscosity of 10-15 cSt. Even if the color difference between untreated and treated samples was not apparent in the printing step, the color appearance increased after steaming. The color appearance of cyan, magenta, yellow, black reactive colorants increased in the order of CMC>Sodium alginate>Dextrin. Wash fastness to shade change and staining for the treated samples were 4-5 rating, while untreated sample was 1-2 rating. Also, the pre-treated sample with 1:1 mixtures had 4-5 rating. Both dry and wet rubbing fastness to shade change and staining were excellent in the treated samples, whereas rubbing fastness of untreated sample was 1-2 rating. With exception of 3 rating to black color, light fastness properties were 4 rating for the remaining three colors in the regardless of treatment condition and mixing of pre-treating agents. Dry cleaning fastness of all samples were also 4-5 rating irrespective of treatment condition and mixing of pre-treating agents.

• 대한기계학회논문집B
• /
• 제27권10호
• /
• pp.1489-1497
• /
• 2003

Aerosol charge neutralizers with various radioactive sources have been used to apply an equilibrium charge distribution to aerosols of unknown charge distribution. However, the performance of aerosol charge neutralizers is not well known, especially for highly charged particles. Measurements of highly charged particles are needed in air cleaning devices, e.g. electrostatic precipitator, bag filter with a pre-charger, and electrical cyclone. In this study, the particle charging characteristics of two different aerosol charge neutralizers were experimentally investigated for singly charged monodisperse particles and highly charged polydisperse particles. One has radioactive source of $^{85}$ Kr (beta source, 2 mCi) and the other has $^{210}$ Po (alpha source, 0,5 mCi). The air flow rate passing through each aerosol charge neutralizer was changed from 0.2 to 2.5 L/min. The results show that the charge distribution of singly charged monodisperse particles passing through the $^{85}$ Kr aerosol charge neutralizer is well agreed with the Boltzmann equilibrium charge distribution at an air flow rate of 0.3 L/min, However, it deviates from the equilibrium charge distribution when the air flow rates are 0.6, 1,0, and 1,5 L/min, On the other hands, the effect of air flow rate is insignificant for the $^{210}$ Po aerosol charge neutralizer. The non-equilibrium character in charge distribution of highly charged polydisperse particles passing through the $^{85}$ Kr aerosol charge neutralizer greatly depends on the air flow rate, however it is insensitive to the air flow rate for the $^{210}$ Po aerosol charge neutralizer.

• Corrosion Science and Technology
• /
• 제3권2호
• /
• pp.59-66
• /
• 2004

In construction of new ships and large steel bridges in Korea, pre-construction primers (PCP), also known as shop primer, are routinely used and retained as an integral part of the protective coating system. Retention of PCP's can significantly reduce building schedule and cost. Retaining PCP through the so-called "sweep blasting" procedure eliminates or minimizes the necessity of a second blast operation, thus shortening overall schedule as well as reducing labor cost and hazardous waste disposal cost. This study evaluates the feasibility of retaining PCP as the part of primer for high performance protective coating systems applied to ships' hull, bottom and ballast tanks. Upon proving that the retention of the PCP is a viable option, the process of coating application can he improved significantly in terms of cost and working schedule of new ships and large steel bridges. Results indicate that use of the PCP via sweeping blasting in conjunction with standard high performance protective coating systems does not degrade the overall performance of the coating systems. At the same time, it is also highly recommended that the secondary surface preparation should consist of grit blasting of weld burnt and other damaged areas to SSPC SP-IO grade (Sa 2.5 Gr.), Near White Blast Cleaning with proper application and attention to detail.