• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.400-403
• /
• 2007

This research describes how the class D amplifiers with power efficiency are designed and implemented for the PA audio systems. The configuration that makes use of the class D amplifier properties depends strongly on their applications. Thus in this paper the characteristics of the 2-level and 3-level PWM are analysed and the circuit implementation for them is presented. Using the proposed methods, they are designed and simulated for the further investigation. Test(Simulation) results present the improved performance that shows the satisfactory operations in controlling the PWM to the input signals.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.13-16
• /
• 2000

This paper presents a simple class-D stereo amplifier using 3-phase full bridge circuit configurations which is controlled by a new current control switching method. Although this class-D amplifier has an only one current control loop with the proposed switching method, a good performance can be obtained. In this paper, a strategy for driving stereo signal amplifier with 3-phase full bridge is discussed. With the experimental results, usefulness of the proposed amplifier is confirmed.

• Proceedings of the Korea Contents Association Conference
• /
• 2019.05a
• /
• pp.275-276
• /
• 2019

The purpose of this study was to assess condylar size in volumetric 3D imaging in patients with class I, class II, class III malocclusions. To evaluate the differences among the three experimental groups, the condylar values of men were analyzed. There was a significant difference in the measured values of height. Among the three experimental groups, the condylar measurements in women showed significant differences in height and width. This study is expected to be used for determining the connection between malocclusion and condyle as a base line data.

• Korean Journal of Environment and Ecology
• /
• v.1 no.1
• /
• pp.35-45
• /
• 1987

To survey trail damage and vegetational change around trail at Bukhan Mountain National Park in Korea, field survey was executed over Bukhan mountain district during August, 1987. Trail damage was surveyed for he section of 7.18km from Ui valley to Jeongnung valley in which user's density was high. Ground vegetation was surveyed with a belt-transect method from trail edge to forest and edge species were surveyed with a belt method along trail edge. Interrelation between trail damage and user's density was not dear. Damage class II of trail showed 23.9% of the surveyed section and class III showed 8.0% and class II and III of natural trail showed 19.7% and those of facilitated trail showed 12.3%. The length of damage class II and III requiring readjustment were estimated as 3.65 km and 1.22km from the main trail course of 15.3km at Bukhan mountain district. In case of no intervention to forest by users, vegetational change around trails was appeared up to 6-8 m from trailside. But in case of intervention to forest by users, vegetational change was not coincident with the change of soil hardness and was diverse locally. Quercus mongolica, Lespedeza cyrtobotrya and Rbo-dodendron mucronulatum were appeared as Raunkiaer frequency class E, and Weigela subsessilis. Lespedeza maximowiczii, Rhododendron schlippenbachii and Sorbus alnifolid were appeared as class D at trail edge of ridge-Quercus mongolica was appeared as class E and Rhododenderon mucrounulatium. Stephanandra incisa were appeared as class D at trail edge of midslope. Rhododenron mucronulatum. Lespedeza maximowiczii and Stepanandra incisa were appeared as class D at trail edge of valley. Lespedeza cyrtobotrya. Lespedeza maximowiczii and Stephanandra incisa were appeared as class D at trail edge of valley beside motorway.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.1
• /
• pp.109-116
• /
• 2014

This paper presents a high-efficiency digital class-D audio amplifier using a composite interpolation filter for portable audio devices. The proposed audio amplifier is composed of an interpolation filter, a delta-sigma modulator, and a class-D output stage. To reduce power consumption, the designed interpolation filter has an optimized composite structure that uses a direct-form symmetric and Lagrange FIR filters. Compared to the filters with homogeneous structures, the hardware cost and complexity are reduced by about half by the optimization. The coefficients of the digital delta-sigma modulator are also optimized for low power consumption. The class-D output stage has gate driver circuits to reduce shoot-through current. The implemented class-D audio amplifier exhibited a high efficiency of 87.8 % with an output power of 57 mW at a load impedance of $16{\Omega}$ and a power supply voltage of 1.8 V. An outstanding signal-to-noise ratio of 90 dB and a total harmonic distortion plus noise of 0.03 % are achieved for a single-tone input signal with a frequency of 1 kHz.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.131-137
• /
• 1997

The technology of small and medium sized shipbuilding companies is lower relatively to major shipbuilding companies, and should be up-graded from the viewpoint of national economic development. In spite that hul form design is one of the most important elements with respect to shipbuilding technology, small and medium sized shipbuilding companies are incapable of developing hull form. Inorder to support technically such companies hull form development was carried out for G/T 999ton class tanker and D/W 4990ton class tanker which are the typical vessels operating in coastal area. The operating efficiency for the developed hull forms are impeoved by 30% for G/T 999ton class tanker and 24% for D/W 4990 tonclass tanker respectively. The results of hull form development including ship model test and performance analysis are presented in this paper.

• Journal of the Korean Mathematical Society
• /
• v.35 no.2
• /
• pp.399-422
• /
• 1998

A useful method of proving the finite decidability of an equationally definable class V of algebras (i.e., variety) is to prove the decidability of the class of finite directly indecomposable members of V. The validity of this method relies on the well-known result of Feferman-Vaught: if a class K of first-order structures is decidable, then so is the class {$\prod$$_{i}$＜n/ $A_{i}$│ $A_{i}$ $\in$ X (i < n), n $\in$ $\omega$}. In this paper we show that the converse of this does not necessarily hold.d.d.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.4
• /
• pp.385-391
• /
• 2007

A class D digital audio amplifier with small size, low cost, and high quality is positively necessary in the multimedia era. Since the digital audio amplifier is based on the PWM signal processing, it is improper to analyze the principle of signal generation using linear system theories. In this paper, a class D digital audio amplifier based ADSM (Advanced Delta-Sigma Modulation) is considered. We first model the digital audio amplifier and then explain the operation principle using variable structure control algorithm. Moreover, the ripple signal generated by the hysteresis in the comparator has a significant effect on the system performance. Thus, we present a method to find the magnitude and the frequency of the ripple signal using describing function. Finally, simulations and experiments are provided to show the validity of the proposed methods.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1154-1157
• /
• 2004

This paper presents design of a class D Amplifier using multi-level switching and Zero-Voltage-Switching(ZVS) technique. The amplifier circuit features zero voltage switching at all switches of the circuit and multi-level switching operation so that the higher efficiency and lower THD could be achieved. A 50-W prototype D class amplifier built and tested it. As a result, the maximum efficiency of $96\%$ and the THD of under $60\%$ were obtained.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.271-273
• /
• 2007

본 논문에서는 TV나 Audio등에 사용되는 2채널 30W급 Class-D amplifier를 동부하이텍의 0.35um BD350BA 공정을 사용하여 디지털 방식의 Class-D amplifier 출력단 구동에 적합하도록 설계하였다. 출력단은 Bootstrap 전원을 사용한 N-N type의 30V LDMOS 내장형이며 각각 $250m{\Omega}$의 턴 온 저항을 갖게 설계 되었다. THD+N 특성개선을 위한 Dead time 및 Delay 조정회로를 내장하였으며 보호회로로는 Over current, Over temperature, UVLO 가 있다.