This study evaluated the microleakage performance of four self-etcing primer adhesives(Clearfil SE Bond, Clearfil Liner Bond 2, UniFil Bond, and FL Bond) and one self-etching adhesive(Prompt L-Pop). Class V cavity preparations with occlusal margins in enamel and gingival margins in dentin were prepared on both buccal and lingual surfaces of 50 extracted human molar teeth. Prepared teeth were randomly divided into five groups and restored using one of five adhesives and composite resins: Prompt L-Pop/Filtek Z 250(Group 1), Clearfil SE Bond/Clearfil AP-X(Group 2), Clearfil Liner Bond 2/Clearfil AP-X(Group 3), UniFil Bond/UniFil F(Group 4), and FL Bond/Filtek Z 250(Group 5). Following one day storage in room temperature water, the restored teeth were thermocycled for 500 cycles between 5$^{\circ}C$ and 55$^{\circ}C$. Marginal microleakage was assessed by dye penetration using 2% methylene blue dye. After 24 hours, the teeth were sectioned longitudinally and evaluated for microleakage under steromicroscope The data were statistically analysed by Kruskal-Wallis Test, Mann-Whitney and Wilcoxon signed ranked tests. The results of this study were as follows ; 1. The microleakges at both enamel and dentinal mal$.$gins were the lowest in group 4. increasing among groups in the following order: group 2, follwed by group 5, follwed by group 1, and the highest in group 3. 2. At the enamel margins, the microleakage of group 3 was significantly higher than those of groups 2. 4 and 5(p<0.05), and also the microleakage of group 1 was statistically higher than those of groups 2 and 5(p<0.05). 3. At the dentinal margins, microleakage of group 3 was signincantly higher than microleakages of groups 1, 2, 4 and 5(p<0.05). 4. Compared with microleakages between the enamel and dentinal margins of each group, groups 1, 4 and 5 at enamel margin and group 2 and group 3 at dentinal margin were higher microleakage. But there was no significant difference between enamel and dentinal microleakages of each group(p>0.05).
Journal of the Korean association of regional geographers
/
v.5
no.1
/
pp.163-185
/
1999
The purpose of this study is to develop the model of constructivist multimedia-assisted instruction(CMAI) and to analyze the effect of it in the secondary school geography. The main results are as follows : (1) The conceptual model of CMAI can be defined as an instruction aiming at making a person who has self-directed learning ability through constructivism and multimedia. The procedural model of CMAI based on PIDA instructional strategy is divided into four stages : prediction & explanation, inquiry activity, discussion & fixation, application & synthesis stage. (2) CMAI is typed by offline CMAI and online CMAI. that is, O/WCMAI(online CMAI by web-based courseware). Offline CMAI is subdivided into P/TCMAI(offline CMAI by presentation-based courseware) and C/RCMAI(offline CMAI by cd-rom based courseware) according to authoring tool and function. (3) Offline constructivist multimedia course-ware(offline courseware) was developed for 2 periods as the material to analyze the effect of CMAI. Offline courseware is received development level of it. (4) After offline courseware being applied to the class, the effect of it according the types of the CMAI instruction(lecture instruction, whole teaching, individualized learning, cooperative learning) was analyzed. As the result of analyzing the descriptive statistics of the level of learning achievement and instruction response, there isn't big relationship between them. As the result of analyzing the inferential statistics of the level of learning achievement, there wasn't significant difference between the types of CMAI instruction in whole student of the classes and certain students who improved their grades. But as the result of analyzing of the level of instruction response, there was significant difference between lecture instruction and other types of the CMAI instruction(whole teaching, individualized learning, cooperative learning).
Journal of the Korean Applied Science and Technology
/
v.12
no.2
/
pp.121-130
/
1995
This project has been worked out for isolation of EPA-producing bacteria from marine source of sea water, sea sediment and intestinal contents eviscerated from some red-muscle fish such as mackerel, horse-mackerel and spike fish. The samples were precultured on the media of PPES-II glucose broth and then pure-cultured on Nutrient agar and P-Y-M glucose. Lipids extracted from those bacterial mass collected by centrifugation were analysed in terms of lipid class and fatty acid composition. The results are resumed as follows : 1. 112 strains from sea water and 76 strains from sea sediment were tested for their EPA producing capability, but both strains of (SA-67 and SA-91) from the former and four strains(SS-35, 37, 51 and 71) from the latter have been proved to produce EPA above the level of 2% of total fatty acids. The strains such as GS-11, 29, 31, HM-9, 29, B-18, 33, 107, YL-129, 156, 203, 77, 104 and 256 which were isolated from fish intestinal contents, have also produced EPA at higher level than 2% of total fatty acids. 2. Contents of total lipids extracted from the cultures of these strains grown at $25^{\circ}C$, range from 2.8% to 6.9% (on dry weight %), and they are mainly composed of polar lipids($40.9{\sim}52.9%$) such as phosphatidyl glycerol($^{+}cardiolipin$)(?) and phosphatidyl ethanolamine ($33.8{\sim}40.0%$), with smaller amount of free fatty acid ($11.2{\sim}20.2%$). 3. EPA was isolated from a mixture of fatty acid methyl esters obtained from the lipid of each strain by HPLC in silver-ion mode and was identified by GC-Mass spectrometry. 4. The strains of SW-91, GS-11, GS-29, HM-9, B-18 and YL-203 grown at $25^{\circ}C$ have a level of 5% EPA in their total fatty acids, and the GS-11 and HM-9 strains show a tendency of increase in the EPA level with an increase of growth temperature.
Journal of Korean Society of Environmental Engineers
/
v.30
no.3
/
pp.314-322
/
2008
This study was carried out to assess aerobic stabilized waste sludge as liquid fertilizer for the growth of cucumber, cabbage and chrysanthemum. Sludge was pretreated with NaOH(40 meq/L) at 40$^{\circ}C$ for 330 min. The number of fecal coliforms in batch test sludge fertilizer was more efficiently reduced than those in continuous one, maybe due to longer SRT. All produced fertilizer belonged to class B according to US EPA requirement at least. Among 6 heavy metals regulated in Korea, As, Cd and Hg were not detectable in plant amended with fertilizer whereas the concentration of Cr, Cu and Pb in plant was less than 10 mg/kg dw. However, Zn and Ni, which were restricted in other country, but not in Korea, were detected in most amount of 118 mg/kg and 15.7 mg/kg, respectively. Furthermore, based on dry weight of plant, digested sludge(5.4 mg, dw) functioned as better fertilizer rather than activated sludge (4.3 mg, dw), much more fertile when those sludge was pretreated(1.24 mg, dw) compared to untreated one(1.12 mg, dw). But its fertility was 60$\sim$80% of commercial fertilizer and accumulation of Zn, Ti and Cr in plant was founded. Therefore, it could be concluded that sludge-fertilizer can be used for flower unlimitedly, but for edible plant limitedly as additive fertilizer.
Kim, Yeong-Uk;Sin, Hong-Jae;Ha, Jeong-Min;Choe, Su-Han;Lee, Jong-Gil
Korean Journal of Materials Research
/
v.1
no.1
/
pp.46-53
/
1991
The stress of PSG (Phosphosilicate glass), USG (Undoped-silicate grass) and SiN films, which are mainly used as passivation layers in semiconductor memory devices, deposited by CVD methods has been studied as a function of film thickness and holding time in air. The stress of the PSG film or the USG film is increased in tensile state with increasing film thickness. On the other hand the stress level of the SiN film in compressive stress does not change as film thickness changes. The stress of PSG film shows the drastic change from the tensile stress to the compressive stress after the film is left 2 days in air. FTIR spectra indicated that the stress variation was due to the penetration of water molecule. It looks possible to recover the stress of about $2.5{\times}{10^9}dyne/cm^2$ by annealing treatment at $300^{\circ}C$ for 20min. The total stress of multi-layered films having the PSG film is determined mainly by the stress variation of PSG layer with holding time. The total stress of multi-layered film appears to have a functional relationship with the stress in the thickness of each film. The resistance against stress-migration of sputtered Al line increases with increasing the tensile stress for the PSG film or the USG film.
This study investigated the influence of IRM on marginal microleakage of 5th generation adhesives. Class V cavities with gingival margins in dentin were prepared on both buccal and lingual surfaces of 60 extract-ed human molar teeth. Prepared teeth were randomly divided into six groups. Group 1 and 4 received no temporary restoration with IRM. Group 2 and 5 were covered with IRM mixed at P/L ratio(10g/1g). Group 3 and 6 were covered with IRM mixed at P/L ratio(10g/2g). The temporary restorations were removed mechanically with an ultrasonic scaler after one-week storage in distilled water. The cavities were restored using one of two adhesives and composites ; Single Bond/Filtek Z 250(Croup 1, 2 and 3), UniFil Bond/UniFil F(Group 4, 5 and 6). Following one day storage in distilled water, the restored teeth were thermocycled for 500 cycles(between $5^{\circ}C{\;}and{\;}55^{\circ}C$) and immersed in 2 % methylene blue for dye penetration testing. The results were analysed using Kruskal-Wallis Test, Mann-Whitney and Wilcoxon signed ranked test at a significance level of 0.05. The results of this study were as follows 1. Ranking of mean microleakage scores at the enamel margins was Group 10.05) 4. At the dentin margins, the microleakage of the group not pretreated with IRM was lower than that of the group pretreated with IRM. And the microleakage of UniFil Bond was lower than that of Single Bond. 5. Compared with microleakages between the enamel and dentin margins of each groups, Group 1, 2, 3, 4, 5 and 6 at dentin margin were higher microleakage than those at enamel margin. There were significant difference between enamel and dentin microleakage of Group 2 and 3(p<0.05).
Kim, Sun-Ki;Chung, Guk-Hoon;Han, Jeong-Jun;Cho, Sang Woo;Yoon, Suk Hoo
Korean Journal of Food Science and Technology
/
v.47
no.3
/
pp.281-285
/
2015
An oleaginous fungus was isolated from soil and identified as Mortierella sp. (M-12) for producing arachidonic acid (AA). Cell disruption methods, extraction methods, and particle sizes of freeze-dried biomass were tested to achieve maximum extraction of total lipids and AA. M-12 grown in glucose yeast media at $25^{\circ}C$ for 7 days contained 35.5% total lipid, and 47% of the total lipid was AA. Lipid extraction yield from wet biomass was shown to be similar to that in a dry state. Maximum lipid extraction was achieved using a mixture of chloroform and methanol (2:1) as an extraction solvent. Different mechanical cell disruption methods did not affect lipid extraction yields. The smaller the particle size of the biomass, the better the lipid extraction yield was observed. Particle size of biomass was shown to more strongly affect lipid extraction than extraction time. The highest AA content was observed in the class of neutral lipids.
This study aims to reduce the production cost of mushrooms and therefore boost the income of mushroom producers. The addition of a 10% concentration of herb medicine refuse was adequate for promoting mycelium growth in Flammulina velutipes. A moisture content of 60% in the culture medium was adequate for promoting hyphal growth. The optimum temperature and humidity were $16^{\circ}C$ and 70%-85%, respectively. The average yield of Flammulina velutipes fruting body per 1,100 ml bottle was 275-282 g, which is similar to that of the control. The outbreak of diseases such as mildew and bacterial blotch in mushroom was never observed in the bottle treated with herb medicine refuse. Fewer deformed and second-class quality mushrooms were observed than in the control group. Deviation reduced, and mushroom growth was observed to be significantly uniform. The winter mushroom had a white fruiting body with a hemispherical shape. The diameter of the mushroom cap was 9.2-9.3 mm, stipe length was 12.7-12.8 cm, and thickness was 3.3-3.4 mm; these were almost the same as those in the control group. The partial hardness of winter mushrooms in both the experimental and the control groups showed that the stipe ($54.6-57.3g/cm^2$) is a little harder than the mushroom cap ($46.8-47.6g/cm^2$). The calories and nutrients per 100 g of mushrooms in the control and samples were similar to each other.
Methods of separating yeast cells from oil-water-cell emulsion and subsequent purification of the recovered yeast have been studied. In addition, the results of preliminary feeding experiments in which a yeast grown on gas oil was incorporated into chick rations are reported. According to the present study, it appears that the recovery of the yeasts would be easier at pH 9, since the emulsion is relatively more unstable. A class of surface active agent at a concentration of 0.3% was found to facilitate the separation of the yeast from the emulsion. The use of electrolytes such as NaCl and KCl were found to be most effective in breaking the emulsion. Solvent treatment using iso-propyl alcohol and its azeotropic mixture with hexane at $58^{\circ}C$ are particularly suitable for purification of the yeast. In the feeding experiment it was found that 5 percent of the fishmeal in the control ration could be replaced by the yeast with no adverse effect on performance. However, when 8 percent of the fish meal in the control ration was replaced by the yeast, some effect on live-weight gain of the chicks was observed.
Journal of The Korean Association For Science Education
/
v.35
no.5
/
pp.895-905
/
2015
Citizens should be sensitive to the complex and controversial SSIs (Socioscientific Issues), be able to make a responsible decision with evidence and empathy, and furthermore take political action for the larger welfare. The premise of this research is that understanding the nature of science (NOS) takes an important role when students and adults participate in the discourse on SSIs because SSI reasoning requires individuals to examine information and counter-information with skepticism. We therefore designed SSI programs that were incorporated with NOS by adapting a contextualized-reflective approach. The leading research question was to what extent SSI contexts contributed to promoting students' understanding of NOS. A total of 71 11th grade students participated in this program. The school was located in an urban city near the capital city of Seoul, South Korea. We designed SSI programs to cover the issues of genetically modified organisms, climate change, and nuclear energy. Each issue required four to six class periods to complete. We conducted pre- and post-program tests using the revised VNOS-C, recorded group discussions or debates and collected student worksheets to observe the increase of student NOS understanding. As a result of this program, students showed moderate improvement in their understanding of NOS.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.