• Membrane Journal
• /
• v.12 no.2
• /
• pp.75-89
• /
• 2002

The effect of addition of inorganic salts in polyethersulfone (PES) polymer solution on the membrane formation and ultrafiltartion performance was studied through the thermodynamic and kinetic properties of casting solution. To control the thermodynamic and kinetic properties of casting solution, various inorganic salts $[CaC1_2, LiCl, LiClO_4, ZnC1_2 $and Mg(ClO_4)_2]$ were added in the PES/NMP solution. Variation of membrane morphology and performance of the resulting membranes with change of the salt type and content added in tasting solution were discussed using viscosity, coagulation value, light transmittance measurement, overall membrane porosity, ultrafiltration experiment and cross-sectional SEM image. For all kind of inorganic salts, according as increase of the salt content in casting solution, viscosity is increased, coagulation value becomes lower, top layer thickness below the skin surface is increased, bovine serum albumin(BSA) rejection decreased and pure water flux is increased except $CaC1_2$ and LiCl. In case of $CaC1_2$ and LiCl, it is found that when the salt content is increased, the formation of macrovoids is suppressed and the precipitation rate becomes slow while instantaneous demixing of precipitation type is maintained. However, in case of $LiClO_4$ and $Mg(ClO_4)_2,$ it is found that precipitation rate becomes faster.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.4
• /
• pp.229-236
• /
• 2012

A molten salt technology using $Li_2O$-LiCl has been extensively investigated to recover uranium metal from spent fuels in the field of nuclear energy. In the reduction process, it is an important point to maintain the concentration of $Li_2O$. $ZrO_2$ is inevitably contained in the spent fuels because Zr is one of the main components of fuel rod hulls. Therefore, the fate of $ZrO_2$ in $Li_2O$-LiCl molten salt has been investigated. It was found that $Li_2ZrO_3$ and $Li_4ZrO_4$ were formed chemically and electrochemically and they were not reduced to Zr. The recycling of $Li_2O$ is the key mechanism ruling the total reaction in the electrolytic reduction process. However, $ZrO_2$ will have a role as a $Li_2O$ sink.

• KSBB Journal
• /
• v.15 no.3
• /
• pp.318-322
• /
• 2000

An oxygen-sensitive fumarate reductase has been purified from the cytosol fraction of the Enterococcus faecalis RKY1 grown anaerobically on a defined medium containing glycerol and fumarate. A major portion of the purification was performed with employing Triton X-100 and reducing agents by Phenyl-sepharose CL-4B DEAE-sepharose and Dephadex G-150 The final activity was 0.42 unit/mg. The deduced molecular mass of active band was 66 kDa. The optimal pH and temperature for the activity were 7.0 and 38$^{\circ}C$ respectively. The enzyme activity was not affected by 1mM metal ions such as bacl2 $.$2H2O HgCl2 MnCl2$.$4H2O ZnCl2 CuCl2$.$2H2O Mgcl2$.$6H2O FeSo4$.$7H2O and by EDTA. Partially purified enzyme ws yellow in color ; spectroscopic study indicated the presence of flavins as a cofactor.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.11
• /
• pp.1061-1065
• /
• 1996

The charge transfer compounds of tetrathiafulvalene (TTF) with the general formula of (TTF)mMCln, (M=Au, Pt, Ir, Os) were prepared by the direct reaction using excess HAuCl4·3H2O, H2PtCl6·xH2O, H2IrCl6·xH2O and H2OsCl6 respectively. The powdered electrical conductivities (σrt) at room temperature are given as follows; (TTF)3AuCl2, 4.53×10-3; (TTF)3.5AuCl2, 6.37×10-3; (TTF)3PtCl4, 5.51×10-4; (TTF)2IrCl4, 2.40×10-5; (TTF)OsCl4·1/2C2H5OH, 4.46×10-7 Scm-1. Magnetic susceptibility, electronic (UV-Vis.), vibrational (IR) and EPR spectroscopic evidences indicate that there is incomplete charge transfer from the TTF donor to gold, platinum, and iridium respectively, and that there is essentially complete charge transfer to osmium, thereby resulting a relatively low electrical conductivity in osmium compound. The EPR and magnetic susceptibility data reflect that the metals are in diamagnetic Au(Ⅰ), Pt(Ⅱ), Ir(Ⅲ), and Os(Ⅱ) oxidation states, and the odd electrons are extensively delocalized over the TTF lattices in each compound.

• Journal of Aquaculture
• /
• v.16 no.2
• /
• pp.118-123
• /
• 2003

This study was conducted to investigate the disinfection effects of chlorine dioxide ($ClO_2$) on 4 fish pathogenic bacteria (Vibrio anguillarum, Edwardsiella tarda, Streptococcus sp. and Staphylococcus sp.) isolated from infected olive flounders. The bacteria were exposed to different concentrations of ClO$_2$ (0.129, 0.246 and 0.455 ppm) and response times (0.5, 1, 3, 5 and 10 min), and then were incubated for 12 hr. The effective disinfection concentrations of $ClO_2$ against experimental bacteria by $ClO_2$ for 0.5 min were observed with 0.455 ppm for Staphylococcus sp., 0.246 ppm for V. anguillarum and E. tarda, and 0.129 ppm for Streptococcus sp., respectively. The duration of exposure at low concentration of $ClO_2$ increased for the disinfectant ability to experimental bacteria.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.417-420
• /
• 2007

Mononuclear mixed-anions Mn complex of TPAMn(η2-NO3)(η-ClO4), where TPA is tris(2-pyridylmethyl)-amine, has been synthesized and characterized. The neutral TPAMn(η2-NO3)(η-ClO4) was obtained from the reaction between Mn(NO3)2·4H2O and [H3TPA](ClO4)3 in MeOH. X-ray crystallographic structure of mononuclear TPAMn(η2-NO3)(η-ClO4) complex showed a seven-coordinated geometry with a tripodal tetradentate TPA, a terminal perchlorate and an η2-bound nitrate.

• Journal of the Korean Chemical Society
• /
• v.58 no.6
• /
• pp.517-523
• /
• 2014

The micellization of TTAB(tetradecyltrimethylammonium bromide) and the solubilization of 4-halogenated phenol isomers in aqueous solution of that surfactant in water have been studied by the UV-Vis spectrophotometric method. Those properties in aqueous solutions of NaCl and n-butanol have been also measured to determine the interactions between the micelle and 4-halogenated phenols and the solubilized sites of those molecules in the micelle. The results show that the values of ${\Delta}G^o_m$ and ${\Delta}G^o_s$ are all negative and the trends of those values depend on both the kinds and the concentrations of additives. Namely, by adding NaCl both ${\Delta}G^o_m$ and ${\Delta}G^o_s$ values are all decreasing, but by adding n-butanol the ${\Delta}G^o_m$ value decreases and the ${\Delta}G^o_s$ value increases.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.3
• /
• pp.294-305
• /
• 1994

The influence of deposition parameter on the electrical, optical andsurface morphology of $SnO_2(:F)$ films prepared by ultrasonic spray deposition using DBDA and $SnCl_4.5H_2O$ as a source material was studied. Resistivity was decreased sharply with increasing F/Sn ratio in solution up to 0.6. Depending on the source material, $SnCl_4.5H_2O$ shows lower resistivity than DBDA. When F/Sn ratio in solution was 1, optical transmittance was higher DBDA than $SnCl_4.5H_2O$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.4
• /
• pp.363-366
• /
• 2007

[ $Zn_2SiO_4:Mn$ ] green phosphors doped with $NH_4Cl$ and Al for PDP were synthesized by solid state reaction method. The luminescence of 532 nm in $Zn_2SiO_4:Mn$ phosphors was associated with $^4T_1{\to}^6A_1$ transition. Photoluminescence intensity of $Zn_2SiO_4:Mn$ doped with $NH_4Cl$ 15 mol% increased about two times as compared with that of $NH_4Cl$ non-doped sample. The color of the emission of Al-doped $Zn_2SiO_4:Mn$ phosphors changed to yellowish green.

• Korean Journal of Materials Research
• /
• v.18 no.2
• /
• pp.92-97
• /
• 2008

In spray pyrolysis, the effects of the preparation temperature, flow rate of the carrier gas and concentration of the spray solution on characteristics such as the morphology, size, and emission intensity of $Ca_8Mg(SiO_4)_4Cl_2:Eu^{2+}$ phosphor powders under long-wavelength ultraviolet light were investigated. The phosphor powders obtained post-treatment had a range of micron sizes with regular morphologies. However, the composition, crystal structure and photoluminescence intensity of the phosphor powders were affected by the preparation conditions of the precursor powders. The $Ca_8Mg(SiO_4)_4Cl_2:Eu^{2+}$ phosphor powders prepared at temperatures that were lower and higher than $700^{\circ}C$ had low photoluminescence intensities due to deficiencies related to the of Cl component. The phosphor powders with the deficient Cl component had impurity peaks of $Ca_2SiO_4$. The optimum flow rates of the carrier gas in the preparation of the $Ca_8Mg(SiO_4)_4Cl_2:Eu^{2+}$ phosphor powders with high photoluminescence intensities and regular morphologies were between 40 and 60 l/minute. Phosphor powders prepared from a spray solution above 0.5 M had regular morphologies and high photoluminescence intensities.